ViewSonic MW251V110 802.11/b Wireless Monitor-Airpanel V110 User Manual APV110 UG
ViewSonic Corporation 802.11/b Wireless Monitor-Airpanel V110 APV110 UG
Contents
- 1. User manual 1 of 2
- 2. User Manual 2 of 2
User manual 1 of 2
ViewSonic ® V110 Wireless Monitor User Guide Guide de l’utilisateur Bedienungsanleitung 2 ViewSonic airpanel V110 Contents Introduction Your airpanel V110 Wireless Monitor ..................................... Precautions ............................................................................ airpanel V110 Features .......................................................... Front Control Buttons and Features ................................... Rear Connection Ports & Panels ....................................... Battery & Power Properties .................................................... Battery Power Status .......................................................... Changing the Battery ....................................................... Antenna Signal Properties ...................................................... Wireless Connection Signal Status ..................................... Basic Setup Charging the Battery .............................................................. 7 Using the AC/DC Power Converter ..................................... 7 Setting Up Software ............................................................... 8 BEFORE YOU BEGIN ........................................................ 8 Accessing Information from your Home PC ........................ 12 Using the airpanel V110 The Buttons ............................................................................ 13 Using the Stylus ..................................................................... 14 Moving Windows ................................................................. 14 Operating System not Responding ..................................... 15 Calibrating the Touch Screen .............................................. 15 Adjusting Stylus Double-tap Rate ....................................... 15 Resetting your airpanel .......................................................... 16 Soft Reset ........................................................................... 16 Hard Reset .......................................................................... 16 PCMCIA Cards ....................................................................... 17 Using a PCMCIA Card ....................................................... 17 airpanel Settings ..................................................................... 18 Device Settings ................................................................... 18 Optional Accessories The ViewSonic airpanel V110 Dock ....................................... 24 Commercially Available Options ............................................. 25 8-30-02 ViewSonic airpanel V110 External USB Keyboard ...................................................... 25 External USB Mouse ........................................................... 25 External Headphone Set ..................................................... 25 External Microphone ........................................................... 25 Appendix airpanel V110 Specifications .................................................. 26 Customer Support .................................................................. 28 Cleaning and Maintenance .................................................... 29 Limited Warranty .................................................................... 30 Safety Guidelines ................................................................... 31 Compliance and Safety Notices ............................................. 32 Radio Frequency Interference (RFI) Compliance ............... 32 Safety Notices ..................................................................... 34 ii ViewSonic airpanel V110 airpanel V110 Copyright © ViewSonic Corporation, 2002. All rights reserved. airpanel is a trademark of ViewSonic Corporation. ViewSonic, and the three birds logo are registered trademarks of ViewSonic Corporation. Microsoft, Windows, Windows CE, Windows CE Inbox, Explorer and Internet Explorer, Pocket Word, Microsoft Word, Active Sync, MSN, Excel, Windows RDP and the Windows logo are trademarks of Microsoft Corporation in the United States and other countries. Citrix, WindView, and ICA are registered trademarks of Citrix Systems, Inc. MetaFrameis a trademark of Citrix Systems, Inc. Intel and X-Scale are registered trademarks of Intel Corporation. VESA is a registered trademark of the Video Electronics Standards Association. CompactFlash is a trademark of the CompactFlash Association. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation. Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The airpanel V110 Utility CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: airpanel V110 VSMW24688 A-CD-airpanel_V110-1 _______________ _______________ Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal. ViewSonic air panel V110 Introduction Your airpanel V110 Wireless Monitor Congratulations on your purchase of a ViewSonic® airpanelTM V110 Wireless Monitor. With your airpanel V110 you will be able to access files, e-mail, applications, surf the web and data located on your Microsoft Windows XP Professional PC remotely. This user guide will help you set-up your airpanel V110 and introduce you to its many features. Important! Save the original box and all packing material for future shipping needs. Your airpanel V110 package contents include: • ViewSonic airpanel V110 • • • • • • • Quick Start Guide airpanel V110 battery AC/DC power adapter with Power cord USB Setup Cable (airpanel to PC) Stylus (2) Stylus Tether airpanel V110 Utility CD-ROM which includes the User Guide documentation and the wireless monitor installation software Precautions • For best viewing conditions view the screen from a distance of 15" to 18". • DON’T TOUCH THE SCREEN WITH YOUR FINGERS. Oils from the skin are difficult to remove. • NEVER REMOVE THE REAR COVER. Your airpanel V110 contains high voltage parts. You may suffer serious injury if you touch these parts. • Avoid exposing the screen to direct sunlight or another heat source. The screen should be facing away from direct sunlight to reduce glare. ViewSonic airpanel V110 • Always handle your airpanel V110 with care; dropping your airpanel V110 could void the warranty. • Do not operate your airpanel V110 outside in a wet, damp or extremely cold environment. • Do not place heavy objects on the screen, video cable, or power cord. • If smoke, abnormal noise, or strange odor is present, immediately switch the airpanel V110 off and call your dealer or ViewSonic. • Use only the AC/DC power adapter supplied with your airpanel V110. airpanel V110 Features Front Control Buttons and Features 10 Figure 1: Front of airpanel V110 Features, Lights, and Buttons 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Antenna Activity Indicator Light Speaker Mouse Button - Right Mouse Button - Left Power On/Off Indicator Light On/Off Toggle Switch Virtual Keyboard On/Off Toggle Switch Log On/Off to Host PC & airpanel Settings Cursor Navigation Button Microphone ViewSonic air panel V110 Rear Connection Ports & Panels 10 11 15 14 13 Figure 2: Back of airpanel V110 Ports, Buttons, Slots, Jacks, & Switches 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Microphone Port Headphone Port DC Power Port Main Battery Port Stylus in Storage Slot Stylus Tether Port USB Ports (Two) Reset Port PCMCIA Eject Button PCMCIA Card Slot USB Port (Mini-B) Kensington Security Lock Port Docking Port Auxiliary Battery Port Main Battery Latch ViewSonic airpanel V110 12 Action Item 1: Hal - See David for security port “legalese.” Battery & Power Properties CAUTION: Replace only with airpanel V110 battery (MW-BAT-003). Your airpanel V110 has two power sources, AC (using the AC/DC converter) or battery. To run your airpanel V110 from an AC outlet, use the supplied AC/DC adapter cable. It takes the airpanel V110 approximately two (2) hours to charge while not in use and four (4) hours while in use. In normal operation (when not connected to an AC outlet), the airpanel V110 operates on battery power alone. A fully charged battery can last up to four (4) hours depending on power consumption factors such as the screen’s brightness setting. The use of optional PCMCIA card accessories will also affect battery life. Battery Power Status The Power Level Icon To determine the battery’s current charge level, check the battery charge icon on the airpanel desktop screen. 100% 50% 0% The Power Status LED The Power Status LED at the upper right corner of the airpanel also displays useful information in the battery’s current status and charge level. In normal battery powered operation: • Off - the device is powered off • Solid Green - power level OK • Solid Yellow - power level low • Blinking Yellow - power level critically low When using the AC Power Adapter: • Solid Green - AC powered, battery charged • Solid Yellow - AC powered, battery charging When using the optional airpanel V110 Dock (described later in the manual): • Solid Green - AC powered, battery charged • Blinking Green - AC powered, battery charging ViewSonic air panel V110 Changing the Battery 1 Slide the Battery Latch upward into the unlock position. 2 Slide out the old battery. 3 Slide in the new battery. 4 Slide the Battery Latch downward into the locked position. Figure 3: Battery Removal and Insertion Antenna Signal Properties Your airpanel V110 and home PC use a wireless radio signal standard called Wi-Fi (802.11b) to communicate with one another. For the best possible connection signal, locate the AirSync wireless adapter at an adequate height above floor level. The quality of your radio connection signal can be weakened by excessive distance and by intervening materials such as walls and furnishings. On occasion, you may want to check the quality of your wireless connection. Wireless Connection Signal Status The Network Icon To check the quality of the wireless signal connection between your airpanel and your home PC, view the network icon on the airpanel desktop screen. Excellent Good Very Low The Antenna Status LED The Antenna Status LED at the upper left corner of the airpanel also displays useful information on the wireless signal connection: • Off - no signal, no connection • Solid Green - good signal level • Solid Yellow - poor signal level ViewSonic airpanel V110 Basic Setup Your airpanelTM V110 Wireless Monitor features powerful software and hardware allowing you to connect to your home PC in order to view and edit files, wirelessly send/receive e-mail, and explore the World Wide Web. This section explains the ports, cables, connections and hardware used to get you started. More details and connection options are explained in the next section, Using the airpanelTM V110. Charging the Battery Using the AC/DC Power Converter Before using the airpanel V110 Wireless Monitor for the first time, charge the battery for at least 3 hours. You may charge, recharge, and/or operate your airpanel V110 with available AC power using the AC/DC power converter. Use the AC/DC power converter as shown in the figure below. Caution: Use only the power converter supplied with your airpanel V110. 1 Plug the AC/ DC cable into the airpanel. 2 Connect the power cord to the AC/DC adapter. 3 Plug the power cord into an AC outlet. Figure 4: Using the AC/DC Power Converter An optional airpanel docking station, described later in this manual, may also be used to charge, recharge, and/or operate your airpanel. For additional information on battery charging and operation, please review the Battery Power & Properties section presented earlier in this chapter. ViewSonic air panel V110 Setting Up Software The airpanel V110 Wireless Monitor is intended for use as a Microsoft Windows for Smart Display device. The Smart Display capability allows the airpanel remote access to a home computer running the Windows XP Professional operating system. BEFORE YOU BEGIN To use your airpanel V110 as a Microsoft® Windows for Smart Display device, you must have the following: TM • Another personal computer running Windows XP professional • Windows XP Professional Service Pack 1 or higher. (Included on the airpanel V110 Utility CD) Action Item 2: Hal - MS software availability to be decided. Follow up. • A USB WI-FI (802.11b) wireless access adapter or a wireless network access point. HARDWARE / SOFTWARE SETUP STEP 1 Turn on the airpanel V110 Action Item 3: Hal - Standby to redo all graphics w/ Adapter ViewSonic airpanel V110 STEP 2 Turn on the your Home PC STEP 3 Insert the airpanel V110 Utility CD ® The airpanel utility contains the Microsoft Windows for Smart Displays installation software. If the Setup application does not start up automatically, you can start it manually by opening Setup.exe on the CD. To open the CD, chose the Start menu then select My Computer. ViewSonic air panel V110 STEP 4 Follow the Setup Instructions The instructions to be followed are the ones on your Home PC monitor, not the ones on the airpanel’s Welcome screen The Home PC Screen The airpanel Welcome Screen Action Item 4: Hal - Expect change in graphic on future build. STEP 5 Connect the USB Setup Cable When prompted, connect the airpanel V110 and host PC to one another using the USB Setup Cable (USB Mini-B to Type A). to up load OS to tablet PC 10 ViewSonic air panel V110 STEP 6 Remove the USB Setup Cable When the setup application is finished,disconnect the host PC and the airpanel V110 from one another by removing the USB Setup Cable The quality of your radio connection signal can be weakened by excessive distance and by intervening materials such as walls and furnishings. For the best possible radio connection, locate the AirSync wireless ad apter at an adequate height above floor level. STEP 7 Connect the Adapter Cable Plug the ViewSonic AirSync Wi-Fi Wireless Access Adapter to your home PC. The table PC can use wireless function to communication with home PC. For those users intending to use a wireless access point, please refer to the Microsoft Windows XP Help files for additional information. Action Item 5: Group - Develop a wireless access point plan. ViewSonic airpanel V110 11 Accessing Information from your Home PC You are now ready to use the airpanel V110 Wireless Monitor to access information from your home computer. Opening the airpanel Link to your Home PC To establish initial access to your Home PC, you begin at the airpanel default Welcome screen. Once the initial connection has been established, the device’s default screen becomes the Dashboard screen. For all future sessions you will simply tap your account button on the Dashboard to establish your connection. Virtual Keyboard Button Figure 5: The airpanel Welcome Screen Starting from the airpanel Welcome screen: 1 Tap the Advanced Button - the Calibration screen will open. 2 Follow the Calibration Instructions - the Alignment Successful screen then will open. 3 Tap Next on the Alignment Screen - the Mira Input Panel will open. 4 Tap Next on the Mira Input Panel - the Setup Complete screen will open 5 Tap the Finished Button on the Setup Complete Screen - the Dashboard screen will open. User Account Button Figure 6: The airpanel Dashboard Screen 6 Click your User Account Button on the Dashboard - the Password prompt will open. 7 Press the Virtual Keyboard Button on the Unit - the Virtual Keyboard will open. 8 Enter your Password then Click OK- your Home PC’s monitor will go dark. The Home PC’s desktop will then appear on your airpanel device. You can now operate your Home PC remotely from your airpanel Wireless Monitor just as if you were at your Home PC itself. 12 ViewSonic air panel V110 Using the airpanel V110 The Buttons The buttons on the right and left side of the airpanel V110 Wireless Monitor screen give you quick access to utilities and provide navigational control. FRONT BUTTONS Power C. Virtual Keyboard D. Connection E. A. Mouse Right B. Mouse Left Cursor F. Figure 7: The airpanel Buttons A. Right Mouse Button - Right functions B. Left Mouse Button - Left functions C. Power Button - Allows you to toggle the unit On and Off. D. Virtual Keyboard Button - Allows you to toggle the Virtual Keyboard On and Off. The Virtual Keyboard enables you to input data using the stylus. E. Connection Button - Allows you to connect and disconnect the airpanel to and from your Home PC. F. Cursor Button - Allows you to control the cursor without having to use the stylus or a mouse. ViewSonic airpanel V110 13 Using the Stylus Use the stylus to “tap” or “double-tap” on an application icon and to select items on the menu. The stylus is also used to “type” on the Virtual Keyboard and to write notes when in handwriting recognition mode. The two styli that are supplied with your airpanelTM V110 are designed for your screen. Use of other pointers could damage your screen. Figure 8: Stylus When not in use, you can conveniently place your stylus in the storage slot located on the top edge of your airpanel V110 Wireless Monitor. A Stylus Tether has been provided to allow you to attach the stylus to the airpanel so it will not become lost or misplaced. Figure 9: Stylus with Tether Action Item 6: Hal - Show tether attached. Moving Windows 1 To move a window on the screen, press on the title-bar gently with the stylus. 2 Move the window slowly to a new location. 14 ViewSonic air panel V110 Operating System not Responding If your operating system is not responding to your stylus, try double-tapping on the screen. Also, try solid taps in the center of the icon. If you still have problems, you may need to recalibrate your screen. Calibrating the Touch Screen If your touch screen is not responding accurately to taps with the stylus, you may need to recalibrate the screen. To do so: Tap on the desktop Settings button - the Settings window will open Tap on the General Tab Tap on the Realign Button in the Stylus section Follow the on-screen instructions When finished, tap the screen - the recalibration is complete The instructions will ask you to place the stylus on a series of cross-hair target symbols. When doing so, rather than just tapping the screen, hold the stylus in place for a second or two as directed until the program responds. Adjusting Stylus Double-tap Rate The double-tap rate can be set in the Settings window: Tap on the desktop Settings button - the Settings window will open Tap on the General Tab Double-tap on the checkerboard graphic to set your double tap rate Close the Settings window ViewSonic airpanel V110 15 Resetting your airpanel Soft Reset Should your airpanelTM V110 fail to respond, it may be restarted without turning off the power. 1 Locate the reset button on the top of your airpanel. 2 Use the tip of your stylus to press the reset button to restart your airpanel. Figure 10: The Reset Button NOTE: A Soft Reset will disable the wireless connection to your home computer. You must re-establish the connection to your home computer by going through the log-on process. Hard Reset A hard reset may be required on rare occasions if your airpanel V110 completely locks up and the soft reset described above does not help. You can perform a hard reset by detaching the main battery while the device is On. You can also: 1 Remove the auxiliary battery’s cover panel. 2 Remove then replace the auxiliary battery and cover panel. Figure 11: The Auxiliary Battery Port NOTE: A Hard Reset will restore the airpanel V110 to its factory default settings and will also delete the contents of internal memory (RAM). You will need to re-install your PC settings in order to use the airpanel. See the airpanel software setup section for complete instructions. 16 ViewSonic air panel V110 PCMCIA Cards A PCMCIA card can extend the functionality of your airpanel V110 Wireless Monitor by providing added features such as extra storage. Using a PCMCIA Card 1 Insert PCMCIA card carefully into the slot on the top side of the airpanel until it snaps into place. 2 Push the release button before removing. CAUTION: Make sure the card is oriented correctly before inserting. Do not force the card in or out. It should be easy to insert or remove. Figure 12: PCMCIA Card For a list of supported PCMCIA cards, see our web site www.viewsonic.com. ViewSonic airpanel V110 17
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2003:04:15 16:22:22+08:00 Create Date : 2003:04:15 16:22:06+08:00 Title : APV110 UG.book Author : rubelh Creator : ADOBEPS4.DRV Version 4.50 Producer : Acrobat Distiller 5.0 (Windows) Page Count : 21 Mod Date : 2003:04:15 16:22:22+08:00 Creation Date : 2003:04:15 16:22:06+08:00 Metadata Date : 2003:04:15 16:22:22+08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools