ViewSonic VS16021 Network Media Player User Manual NMP 200U User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	2452643
Application ID	8kRORQqtQ1LDvxL4e6zwJA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.32kB (1116443 bits)
Date Submitted	2014-11-24 00:00:00
Date Available	2014-11-24 00:00:00
Creation Date	2014-08-22 16:52:36
Producing Software	Microsoft® Word 2013
Document Lastmod	2014-11-20 15:18:10
Document Title	NMP-200U User’s Manual
Document Creator	Microsoft® Word 2013
Document Author:	Jack Wang

VS16021
User Manual
Contents
1. Introduction
1.1.
Package contents
1.2.
Physical view
2. Hardware Operation
2.1.
How to connect the player
3. Software Operation
3.1.
System boot-up
3.2.
Settings
4. Technical Data
4.1.
Specifications
IAdea Limited Warranty
1. Introduction
This document describes the hardware of the VS16021 and terms of IAdea Limited Warranty.
1.1.
Package contents
Media Player Unit
ADB USB cable
AC Adapter
(with select power plug)
Ethernet cable
Wi-Fi Antenna
HDMI extension
cord
NOT INCLUDED: A USB mouse is required for system setup
ATTACH the wireless antenna as shown below, and then screw antenna clockwise onto the post.
1.2.
Physical view
Physical features (left to right in above illustration)









HDMI 1.4 connector for digital video and audio combined output
ADB , Android debug console port
Micro USB for power adapter
Power and Status LED indicator
Ethernet port for network content update
Micro SD card slot
USB ports for USB content update and configuration
S/W Reset button to perform factory reset
Wireless antenna post
2. Hardware Operation
2.1.
How to connect the player
Network
Ethernet /
wireless
Power jack
Power
adapter
Video
Extension cord
Display
Connect player and display via HDMI port with extension cord
2
Plug in Ethernet cable (optional)
Connect player to power via micro USB port with power adapter
3. Software Operation
3.1.
System boot-up
After the power is supplied for approximately 40 seconds, the booting animation will be displayed on screen
as shown below :
The boot-up process takes approximately 75 seconds to complete.
Troubleshooting Tips for media players
The status LED lights up, but no video is displayed on screen
 Ensure that your video cable (HDMI) is securely connected.
 Check if your monitor is turned on and the correct video input source is selected
After boot-up completes, player will stay in
Basic settings menu if no content service has
been configured (i.e. first boot-up for brand
new unit or after a factory reset).
If you have already set content into the player,
contents will play back automatically after 15
seconds after boot-up.
3.2. Settings
You must attach a USB mouse to the player to configure settings. If the player has touch screen, then the USB
mouse is not required, and all the click action can be replaced by tap action.
(Fig. 2.2.1)
Basic settings:
– Network, Time zone and Content.
Each time the Basic settings menu is entered, playback will automatically begin after 15 seconds if content
services have been previously set. Auto playback can be canceled by clicking on the button before the countdown
ends.
User is able to enter Advanced Settings by clicking the Advanced button.
To enter the menu system at any time during playback, plug in a USB mouse and hold the left mouse key in the
corner area as shown below for 10 seconds. If the player has touch screen, then tapping and holding in the
corner areas for 10 seconds would also bring you to the menu.
*Player will ask for password if password has been configured.
4. Technical Data
4.1.
Specifications
VS16021
Video format support
POPAI Screen Media Standards
S6 (MPEG-1 SIF, 3Mbps CBR)
S7 (MPEG-1 480p, 10Mbps CBR)
S8 (MPEG-1 720p, 15Mbps CBR)
S9 (MPEG-2 480p, 6Mbps CBR)
S10 (MPEG-2 720p, 12Mbps CBR)
S11 (MPEG-4 AVC, 480p, 6Mbps CBR)
S12 (MPEG-4 AVC, 720p, 10Mbps CBR)
E4 (VC-1/WMV9, MP@ML, 720p)
E7 (MPEG-4 ASP, 480p, 10Mbps CBR)
E8 (MPEG-4 AVC, 1080p, 10Mbps CBR)
Image format support
POPAI Screen Media Standards
S1 (JPEG 480p baseline)
S2 (JPEG 720p baseline)
S3 (JPEG 1080p baseline)
E1 (PNG 24bpp+alpha, 480p)
E2 (PNG 24bpp+alpha, 720p)
E3 (PNG 24bpp+alpha, 1080p)
Audio codec support
POPAI Screen Media Standards
S4 (MPEG L2 audio)
S5 (MP3 audio, 320Kbps)
Dynamic content
W3C HTML5 (HTML, CSS, JavaScript)
W3C SMIL 3.0 instructions (sub-set)
Physical I/O connectors
HDMI 1.4
USB 2.0 x 2
RJ45 Ethernet port
Wi-Fi antenna port
Micro USB for ADB
Local storage
8 GB on-board flash memory (up to 6 hrs of typical 720p video @ 3 Mbps)
Micro SD card expansion slot
Accessories
HDMI extension cord
Ethernet cable
Wi-Fi antenna
ADB USB cable
Power requirement
5V 2A DC
Power consumption*
6W
Environmental
Operating temperature: 0 – 40° C / 32 – 104° F
Humidity: 5 – 85% @ 40° C / 32 – 104° F non-condensing
Dimensions
107 x 68 x 25.3 mm (4.21 X 2.68 X 1 inches)
Weight
108.1 g
0.24 lbs
Safety
UL / CE certified power supplies
Certifications
CE / FCC / RoHS
Warranty
One-year limited parts & labor
IAdea Limited Warranty
For Media Player Devices
Applicable to IAdea product models:
 VS16021
1.
2.
3.
4.
IAdea provides, unless extended through optional service programs, one (1) year of limited warranty on
its applicable product models listed above. The applicable product must be purchased through an
authorized IAdea reseller. Subject to the conditions of this warranty, IAdea will perform necessary service
on the product without charge for parts or labor if, in the opinion of IAdea, the product is found to be
faulty within the warranty period. IAdea’s sole warranty and obligation will be to repair or replace (at it
sole discretion) such products that require warranty during the applicable warranty period in accordance
with these conditions. If the product is found to be in correct working order, then IAdea reserves the right
to charge you for its time and materials costs.
This warranty only applies if the product has been under normal use and reasonable care (in the opinion
of IAdea). The warranty covers normal usage for which the unit was originally supplied and does not cover
damage, malfunction or failure resulting from use of incorrect voltages, unauthorized installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, power surge problems, thunderstorm activity,
tampering or repair by unauthorized persons (including unauthorized alterations), unauthorized
maintenance, exposure to abnormally corrosive conditions or any foreign object or matter having
entered the product.
If warranty service is required you should contact IAdea at support@IAdea.com. You will be required to
fill out an RMA form and provide proof for your original date of purchase.
You will be responsible for shipping the product to designated IAdea service locations. You are required
to pre-pay for the shipping and custom charges, if any, required for the shipment of the product to IAdea.
The warranties hereby conferred do not extend to any costs associated with the delivery, handling,
freighting or transportation of the product and do not extend to any damage or loss occurring during, or
associated with, transit.
IAdea currently provides warranty service locations in Taipei, Taiwan and Newark, California, USA.
For questions or further information, please contact support@IAdea.com.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Creator                         : Jack Wang
Description                     : Network-enabled Digital Signage Player
Title                           : NMP-200U User’s Manual
Create Date                     : 2014:08:22 16:52:36+08:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2014:11:20 15:18:10+08:00
Metadata Date                   : 2014:11:20 15:18:10+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:9e13ca75-62d5-431a-ac51-324325663f4d
Instance ID                     : uuid:c55a4380-62e4-4218-ac95-e95d31b8b906
Page Count                      : 9
Language                        : zh-TW
Subject                         : Network-enabled Digital Signage Player
Author                          : Jack Wang

EXIF Metadata provided by EXIF.tools