Viper Design DPBTLE24 Charger Communication Module User Manual 16 3030 Manual
Viper Design, LLC Charger Communication Module 16 3030 Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3209619 |
| Application ID | LWSLKnwm1tmQ8AKx+ZKG7g== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.39kB (154822 bits) |
| Date Submitted | 2016-11-28 00:00:00 |
| Date Available | 2016-11-28 00:00:00 |
| Creation Date | 2017-12-18 10:17:21 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-18 10:17:21 |
| Document Title | Microsoft Word - 16-3030 - Manual |
| Document Creator | Adobe Acrobat 11.0.18 |
| Document Author: | jean.gerisch |
Certification Exhibit FCC ID: 2AB7YDPBTLE24 IC: 20699-DPBTLE24 FCC Rule Part: 15.247 ISED Canada’s Radio Standards Specification: RSS-247 ACS Project Number: 16-3030 Manufacturer: Viper Design, LLC Model: DPBTLE24D Manual 2320 Presidential Drive, Suite 101, Durham, NC 27703 USA Voice: 919-381-4235 DPBT PBTLE24D DPBTLE24D Users sers Guide Features • • • • • 2.4Ghz - 2.5Ghz Wirel ireless Link: UART/SPI interfaces es Support for both main ains-powered and battery-powered devic evices Operating Voltage:: 3.3VAC 3. to 30VAC typical Temperature Range: e: -40C to +85C Integrated Networking Stack • Integrated power man management • Integrated wireless s Link Lin Application ations • Batte attery Chargers • Powe ower Supplies DPBTLE24D Note Warning: Changes or modifications to this device not expressly approved by Viper Design LLC could void the user’s authority to operate the equipment. Class B Device “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.” RF Exposure This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with Maximum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20 cm entre le radiateur et votre corps. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec tout autre antenne ou transmetteur.” Viper Design LLC 125 Glancy St Goodlettsville, TN 37072 Phone: 615-325-0966 Version 0.2 Page 2 of 4 DPBTLE24D Low Power License-Exempt Device This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Labels Host Device must contain the following label on the outside of the unit: Contains FCC ID: 2AB7YDPBTLE24 Contains IC: 20699-DPBTLE24 Viper Design LLC 125 Glancy St Goodlettsville, TN 37072 Phone: 615-325-0966 Version 0.2 Page 3 of 4 DPBTLE24D SPECIFICATIONS Operational Supply Voltage: Operating Temperature: 3.0VAC to 30VAC -40C to +85C Radio 2.4GHz: Communication Interface: UART (2 wire: TX, RX) Line interface options: Logic level, RS-232, or RS-485 Data Format: 8 data bits, 1 stop bit, configurable parity bits Baud Rate: Configurable up to 115.2k SPI (4 wire logic level: SS, SCLK, MISO, MOSI) Data Format: 8 data bits Data Rate: Viper Design LLC 125 Glancy St Goodlettsville, TN 37072 Phone: 615-325-0966 Version 0.2 Page 4 of 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:580b6131-a682-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:21 22:41:54Z Create Date : 2017:07:21 22:41:54Z Creator Tool : UnknownApplication Document ID : uuid:580b6131-a682-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools