Viper Ve 17Dsp Eu Users Manual User VE17P EU_VE17HDP EU_VE17DSP EU_VE17HSP EU_VF72305_
VE 17HSP-EU to the manual ea37592e-3e20-493f-8ab8-334d334630ea
2015-01-21
: Viper Viper-Ve-17Dsp-Eu-Users-Manual-350217 viper-ve-17dsp-eu-users-manual-350217 viper pdf
Open the PDF directly: View PDF 
.
Page Count: 11
english User Manual…………………………………………… 1-10
deutch Betriebsanleitung……………………………………… xxx
francais Notice d’utilisation ………………………………….… xxx
nederlands Gebruiksaanwijzing …………………………………... xxx
italiano Istruzioni sull´uso……………………………………… xxx
espanol Instrucciones de manejo……………………………… xxx
portugues Instruções de operação……………………………… xxx
User Manual
VE 17P-EU
VE 17HDP-EU
VE 17DSP-EU
VE 17HSP-EU
Company information:
www.vipercleaning.eu
info-eu@vipercleaning.com
VF72305(1) – 2009-12-22
USER MANUAL ENGLISH
TABLE OF CONTENTS
INTRODUCTION .............................................................................................................................................................. 2
MANUAL PURPOSE AND CONTENTS .......................................................................................................................................... 2
TARGET........................................................................................................................................................................................... 2
HOW TO KEEP THIS MANUAL....................................................................................................................................................... 2
DECLARATION OF CONFORMITY ................................................................................................................................................ 2
OTHER REFERENCE MANUALS................................................................................................................................................... 2
SPARE PARTS AND MAINTENANCE............................................................................................................................................. 2
CHANGES AND IMPROVEMENTS ................................................................................................................................................ 3
OPERATION CAPABILITIES ........................................................................................................................................................... 3
CONVENTIONS .............................................................................................................................................................................. 3
UNPACKING/DELIVERY ................................................................................................................................................ 3
SAFETY .......................................................................................................................................................................... 3
SYMBOLS ....................................................................................................................................................................................... 3
GENERAL INSTRUCTIONS ............................................................................................................................................................ 4
MACHINE DESCRIPTION .............................................................................................................................................. 6
MACHINE STRUCTURE ................................................................................................................................................................. 6
TECHNICAL DATA........................................................................................................................................................................... 7
WIRING DIAGRAM.......................................................................................................................................................................... 8
BEFORE STARTING THE POLISHER........................................................................................................................... 9
ASSEMBLY…………….................................................................................................................................................................... 9
TRANSPORT................................................................................................................................................................................... 9
OPERATION OF POLISHER.......................................................................................................................................... 9
BASIC OPERATION....................................................................................................................................................................... 9
MAINTENANCE............................................................................................................................................................................. 10
STORAGE........................................................................................................................................................................................10
VF72309(1)2009-12 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 1
ENGLISH USER MANUAL
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
VIPER in case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. VIPER will not be answerable for damages coming
from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
CE-declaration is print in Quick Start Guide
IDENTIFICATION DATA
The machine model and serial number are marked on the plate .
The machine model year is written in the declaration of conformity and it is also indicated by the first two figures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
OTHER REFERENCE MANUALS
– Service Manual (that can be consulted at VIPER Service Centers)
– Spare Parts List (see www.vipercleaning.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by VIPER Service
Centers. Only original spare parts and accessories must be used.
Contact VIPER for service or to order spare parts and accessories, specifying the machine model and serial number.
2 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309 (1)2009-12
USER MANUAL ENGLISH
CHANGES AND IMPROVEMENTS
VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by VIPER.
OPERATION CAPABILITIES
All single-disc cleaners are designed to clean and care for floor coverings inside buildings only. The cleaners are suitable for
commercial use, e.g. in hotels, schools, hospitals, etc.
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working
position with the handle(1).
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage
claim. Check that the machine is equipped with the following features:
1. Technical documents:
• SIDE-WINDING POLISHER User Manual
• SIDE-WINDING POLISHER Spare Parts List
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS
VF72309 (1)2009-12 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 3
DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people or damage to objects.
CAUTION!
It indicates a caution related to important or useful functions.
Pay careful attention to the paragraphs marked by this symbol.
NOTE
It indicates the necessity to refer to the User Manual before performing any procedure.
ENGLISH USER MANUAL
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
DANGER!
– Always disconnect the power supply cable when the machine is not in use, before performing maintenance
procedures, before replacing the brush/pad-holder and before opening any access panel.
– This machine must be used by properly trained and authorized personnel only. Children or disabled people cannot
use this machine.
– Do not wear jewels when working near electrical components.
– Do not work under the lifted machine without supporting it with safety stands.
– Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapors.
WARNING!
– The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine malfunction
or breakdown, grounding connection reduces the risk of electric shock.
– The power supply cable plug must be connected to an appropriate outlet, which is grounded according to law in
force.
– This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
– Children should be supervised to ensure that they do not play with the appliance.
– if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
– Improper connection can cause electric shock. Consult a qualified technician to make sure that the outlet is properly
grounded.
– Do not tamper with the power supply cable plug. If the power supply cable plug cannot be connected to the outlet,
have new grounded outlet installed by a qualified technician, according to the law in force.
– Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown on the
machine serial number plate, match the electrical mains voltage.
– Regularly check the power supply cable for damages, cracks, cuts, etc. If the power supply cable is damaged, replace
it immediately.
– To avoid any risk, if the power supply cable is damaged, contact VIPER Service Center or a qualified technician.
– Do not pull or carry the machine by the power supply cable and never use the power supply cable as a handle. Do not
close a door on the power supply cable, or pull the power supply cable around sharp edges or corners. Do not run
the machine on the power supply cable.
– Keep the power supply cable away from heated surfaces.
– To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in.
Disconnect the machine from the electrical mains when not in use and before performing maintenance procedures.
– To avoid electric shock, do not expose the machine to rain or other bad weather conditions. Store the machine
indoors, in a dry place.
– Do not allow to be used as a toy. Close attention is necessary when used near children.
– Use only as shown in this Manual. Use only VIPER's recommended accessories.
– Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving
parts.
– Do not leave the machine unattended without being sure that it cannot move independently.
– Do not use the machine in particularly dusty areas.
– While using this machine, take care not to cause damage to people or objects.
– Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
– Do not put any can containing fluids on the machine.
– The machine working temperature must be between 0°C and +40°C.
– The machine storage temperature must be between 0°C and +40°C.
– VIPER machines can be used in combination with standard detergents which can not damage any materials of VIPER
machines (no use of solvents or other aggressive liquid materials). VIPER will not pay any claims regarding using
aggressive detergents in VIPER machines. If you need a special detergent for cleaning purposes, please contact your
VIPER dealer.
4 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF723091)2009-12
USER MANUAL ENGLISH
– The humidity must be between 30% and 95%.
– Do not use the machine as a means of transport.
– Do not use the machine on slopes with a gradient exceeding the specifications.
– Do not allow the brush/pad to operate while the machine is stationary to avoid damaging the floor.
– In case of fire, use a powder fire extinguisher, not a water one.
– Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
– Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep
the openings free from dust, hairs and any other foreign material which could reduce the air flow.
– Do not remove or modify the plates affixed to the machine.
– If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is
less than 2.5 m/s
2
(98/37/EEC-EN 1033/1995).
– This machine cannot be used on roads or public streets.
– Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank
or in the hoses could freeze and seriously damage the machine.
– Use brushes and pads supplied with the machine and those specified in the User Manual. Using other brushes or
pads could reduce safety.
– In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request
assistance from the authorized personnel or from an authorized VIPER Service Center.
– If the machine
• does not work properly
• is damaged
• has water or foam leaks
• has been left outdoors exposed to bad weather conditions
• is wet or has been dropped into water
– turn it off immediately and contact VIPER Service Center or a qualified technician.
– If parts must be replaced, require ORIGINAL spare parts from an authorized VIPER Dealer or Retailer.
– To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this
manual must be performed by the authorized personnel or by an authorized VIPER Service Center.
– Carefully read all the instructions before performing any maintenance/repair procedure.
– Do not wash the machine with direct or pressurized water jets, or with corrosive substances.
– The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries, electrical
components, etc.), which are subject to standards that require disposal in special centers (see Scrapping chapter).
– Caution: This appliance is not suitable for picking up hazardous dust.
– Caution: This appliance is for dry use only and is not to be used or stored outdoors in wet conditions
– WARNING: Only use the brushes provided with the appliance or those specified in the instructiton manual. The use of
other brushes may impair safety.
– The plug is to be removed from the socket-outlet when its power source during cleaning or maintenance and when
replacing parts or converting the appliance to another function
– Do not allow the rotating brushes to come into contact with the supply Cord.
– The A-weighted sound pressure level LPA in dB(A) < 85 dB (A) emitted by the appliance.
– This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and
rental businesses.
VF72309 (1)2009-12 E17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 5
ENGLISH USER MANUAL
MACHINE DESCRIPTION
MACHINE STRUCTURE
1. Guide Handle
2. Switch Lever, Right
3. Adjustment Lever
4. Shaft
5. Cord Wrap
6. Switch Plug (VE17P-EU、VE17HDP-
EU、VE17HSP-EU), Switch(H/L speed)
(VE17DSP-EU)
7. Wheel
8. Barb Hose
9. Bumper
10. Mainframe
11. Motor Cover
12. Power Cord
13. Strain Relief
14. Lever Solution
15. Switch Lever, Left
16. Button interlock
17. Pad Driver
18. Pad
19. Brush
20. Solution tank assembly
6 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309 (1)2009-12
1
2
6
8
3
4
7
5
16
15
14
13
12
11
10
9
17 18
19
20
USER MANUAL ENGLISH
TECHNICAL DATA
Model VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU
Voltage 220 – 240 V 220 – 240 V 220 – 240 V 220 – 240 V
Power 750 W 1120 W 1125 W/1500 W 1500 W
Current 4.6 A 7 A 7.2 A/9.5 A 9.8 A
Frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz
Brush Speed 150 rpm 150 rpm 150 / 300 rpm 300 rpm
Brush Diameter 43.2 cm 43.2 cm 43.2 cm 43.2 cm
Dimension LXWXH 53.6x43.2x121.9 cm 53.6x 43.2x121.9cm 53.6 x43.2x121.9 cm 53.6x43.2x121.9 cm
Weight 43 kg 45 kg 46 kg 45 kg
Length of Power cord 15m 15 m 15 m 15 m
VF72309 (1)2009-12 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 7
ENGLISH USER MANUAL
WIRING DIAGRAM FOR VE17P-EU VE17HDP-EU VE17HSP-EU
WIRING DIAGRAM FOR VE17DSP-EU
8 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309 (1)2009-12
ENGLISH
Motor
Motor
USER MANUAL ENGLISH
BEFORE STARTING THE MACHINE
ASSEMBLY
For transport reasons the motor head and shaft are supplied not assembled.
1] Insert the gear index housing (1) into the “U” shape bracket (2).
2] Align the holes of the gear index housing and the “U” shape bracket.
3]Insert the socket screws into the holes of the “U” shape bracket and then
tighten the screws.
4] Wind the power cord around the handle and the power cord hook.
TRANSPORT
1] Place the handle in the upright position, Grasp the handle with both hands
and tip the cleaner until it stands on the two wheels (1).
2] Wheel the cleaner to where it is needed.
OPERATION OF THE MACHINE
BASIC OPERATION
1] Remove any obstructions or other obstacles in the area which is to be
cleaned.
2] Place the handle in the upright position and tilt machine back until handle
rests on the floor.
*Be sure the machine is not plugged into an outlet.
3] Attach the pad driver or brush to the machine by placing the clutch plate
over the gearbox hub and turning the driver / brush 1/4 turn.
4] Place machine back into its upright position.
5] Plug power cord into a grounded outlet.
*Never use an extension cord in conjunction with the standard power
cord.
6] The handle height may be adjusted by pulling the adjustment lever (1) and
lower the shaft (2) into its cleaning position.
7] To start the machine, press the red safety button(3) on the top of the upper
switch housing ,and then squeeze either of the operating triggers(4/5) the
safety button (3) must be depressed prior to squeezing the operating
triggers (4/5).
VF72309 (1)2009-12 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU 9
1
2
1
1
4
2
3
5
ENGLISH USER MANUAL
8] Select either low speed {150 rpm} or high speed {300 rpm} by pushing the
motor mounted switch (1) into the low or high position.(Only for VE17DS)
*Never change the speed while operating the machine. Be sure the
power is turned off prior to changing the speed.
9] When the machine is in operation, both hands should be placed on the
switch housing {upper handle}.
10] During operation, to make the machine go right, gently raise the handle. To
make the machine go left, gently lower the handle.
11] To stop the machine at any time, simply release the operating trigger and the
machine will stop automatically.
12] Unplug machine as soon as you are not using it.
13] Tilt machine back and remove pad driver or brush.
14] Roll the power cord around the handle and the power cord hook.
MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance procedures.
* Always confirm that the machine is unplugged prior to performing any maintenance or repairs.
*Never store a low speed machine with the pad driver or brush mounted to the machine.
1] Clean the outside of the machine with a mild cleaner.
2] Check power cord for any damage. If damage is detected, replace power cord immediately.
3] Lubricate wheels with a water resistant lubricant once a month.
4] Check machine for loose or missing nuts and bolts, and replace as necessary.
5] If the machine is used in a dusty environment, you may remove the motor cover and blow the motor, clean with
compressed air. This will ensure proper ventilation, and allow the motor to run cooler.
STORAGE
1] Unplug machine from power source.
2] Store in upright position in a dry area.
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities.
10 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309 (1)2009-12
1
