Virgin Pulse VP-12 2.4GHz 40 Channel Analog Modulation Cordless Phone User Manual FCC Information

Virgin Pulse LLC 2.4GHz 40 Channel Analog Modulation Cordless Phone FCC Information

Contents

FCC Information

1.877.4VPULSE or www.virginpulse.comYour telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance withparts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published byACTA.1. Notification to the Local Telephone CompanyOn the bottom of this equipment is a label indicating, among other information, the US number and Ringer EquivalenceNumber (REN) for the equipment. You must, upon request, provide this information to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone line and still have all of thesedevices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devicesconnected to one line should not exceed 5. To be certain of the number of devices you may connect to your line asdetermined by the REN, you should contact your local telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with theapplicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug isprovided with this product. It is designed to be connected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.NotesThis equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if youare on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this productdoes not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult yourtelephone company or a qualified installer.2. Rights of the Telephone CompanyShould your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicableand the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. Incase of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporarydiscontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring acomplaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.EQUIPMENT APPROVAL INFORMATION
1.877.4VPULSE or www.virginpulse.comThe telephone company may make changes in its communications facilities, equipment, operations or procedures wheresuch action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If thesechanges are expected to affect the use or performance of your telephone equipment, the telephone company must giveyou adequate notice, in writing, to allow you to maintain uninterrupted service.This product meets the applicable Industry Canada technical specifications.HEARING AID COMPATIBILITYThis telephone system meets FCC standards for Hearing Aid Compatibility.US Number is located on the bottom of the base unitREN NUMBER IS LOCATED ON THE BOTTOM OFTHE BASE UNIT.CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed.Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference.
1.877.4VPULSE or www.virginpulse.comThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference; and (2) This device must accept any interference received, including interference that may causeundesired operation.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna isconnected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician foradditional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify andResolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.20402. Please specify stock number 004-000-00345-4 when ordering copies.INTERFERENCE INFORMATION

Navigation menu