Vision Automobile Electronics Co WS2G Water Sensor User Manual Manual
Vision Automobile Electronics Industrial Co Ltd Water Sensor Manual
Manual
Water Sensor Installation and Instructions WSZG Programing/Enrolling WSZG 1. Program as Day Zone (05) on loop 3 2. Takes 3 minutes and 3 seconds to trip and 3 minutes and 3 seconds to reset. 3. ZGIG panel firmware must be 1.10.1 or higher. General information 1. Unit made to work with ZGIG wireless alarm panel only. 2. Low battery on WSZG will report to ZGIG Panel 3. Use only probe that attracted to WSZG 4. Transmitter operation temperature 20F to 12°F 5. In a hot area like an attic remote the probe into hot area but put transmitter in controlled area. 6. Unit trips when water covers both metal contact points. Includes 1. One complete water sensor 2. 4 mounting screws 3. Strip of double sided tape. 4.1 Panasonic CR123A 3V lithium battery FCC}! KFR-WSZG Warranty is 1 year GB1H-52UC1 www.H20ALARM.COM Federal Communications Commission Statement This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 ofthe FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with th â struction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver, Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help, This device complies with Part 15 ofthe FCC Rules. Operation is subject to the following two conditions: (1 ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user' 5 authority to operate this equipment, Limited Warranty H20ALARM Guarantees that every wireless door/window sensor is free from physical defects in material and workmanship under normal usage for one yearfrom the date of purchase. Ifthe product proves defective during this one-yearwarranty period, Vision will replace it free of charge. Vision does not issue any refunds, This warranty is extended to the original end user purchase only and is not transferable, This warranty does not apply to : (1) damage to units caused by accident, dropping or abuse in handling, or any negligent usage; (2) units which have been repaired, taken apart, or modified by an unauthorized personnel; (3) units not used in accordance with instruction; (4) damages exceeding the cost ofthe product; (5) transit damage, initial installation costs, removal cost, or reinstallation cost. For information on additional devices, please visit us at www.H20ALARM.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2014:08:05 09:20:28+08:00 Create Date : 2014:08:05 09:20:01+08:00 Metadata Date : 2014:08:05 09:20:28+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:7b5eadb9-3289-408e-b8f9-21f14c30c105 Instance ID : uuid:2e37ae72-8411-4a06-a4bf-4458d1258df6 Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Page Count : 1 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools