Visioneer Scanner 8100 Users Manual Book

If not then 8100_Install.OT3.EN Manual: ://support.visioneer.com/s/Manuals/8100/8100_Install.OT3.EN

8100 to the manual ba12e8b4-33f8-4e86-a7a8-2765092b2fa5

2015-02-05

: Visioneer Visioneer-Scanner-8100-Users-Manual-457141 visioneer-scanner-8100-users-manual-457141 visioneer pdf

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

Visioneer® OneTouch®
8100 Scanner
FOR

USB OR PARALLEL PORT CONNECTION

Installation Guide

COPYRIGHT INFORMATION
Copyright © 1999 Visioneer, Inc., a wholly owned subsidiary of Primax Electronics LTD.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The Visioneer brand name and logo are registered trademarks of Primax Electronics LTD. OneTouch is a trademark of Primax Electronics LTD. The
PaperPort brand name and logo are registered trademarks of ScanSoft, Inc.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. TextBridge is a registered trademark of
ScanSoft, Inc. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International,
Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a
licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on
any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any
purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Part Number: 05-0402-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software
Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer
is solely responsible for complying with all such laws and regulations.
Visioneer's Limited Product Warranty
If you find physical defects in the materials or the workmanship used in making the product described in this document, Visioneer will repair, or at its option,
replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 12-month
period after the date of your original purchase of the product.
THIS IS VISIONEER'S ONLY WARRANTY AND YOUR EXCLUSIVE REMEDY CONCERNING THE PRODUCT, ALL OTHER
REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE EXPRESSLY EXCLUDED. AS A RESULT,
EXCEPT AS SET OUT ABOVE, THE PRODUCT IS SOLD “AS IS” AND YOU ARE ASSUMING THE ENTIRE RISK AS TO THE PRODUCT'S
SUITABILITY TO YOUR NEEDS, ITS QUALITY AND ITS PERFORMANCE.
IN NO EVENT WILL VISIONEER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY DEFECT IN THE PRODUCT OR FROM ITS USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All exclusions and limitations in this warranty are made only to the extent permitted by applicable law and shall be of no effect to the extent in conflict with the
express requirements of applicable law.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation

TABLE OF CONTENTS

TA B L E O F C O N T E N T S
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Please Use the Proper Section of This Guide . . . . . . . . . . . . . . . . . . . 1
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
The Visioneer OneTouch 8100 Scanner . . . . . . . . . . . . . . . . . . . . . . 2
What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting the PaperPort Software User’s Guide . . . . . . . . . . . . . . . . . . 4

Part 1: Installing
Installing to a USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STEP 1: Installing the PaperPort Software . . . . . . . . . . . . . . . . . 5
STEP 2: Connecting to a USB Port . . . . . . . . . . . . . . . . . . . . . . . 6
Installing to a Parallel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STEP 1: Connecting to a Parallel Port . . . . . . . . . . . . . . . . . . . . 10
STEP 2: Installing the PaperPort Software . . . . . . . . . . . . . . . . 13
Checking Out Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
If the Scanner Is Not Properly Connected . . . . . . . . . . . . . . . . . 16

Part 2: Scanning
Three Ways to Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Scanning by Pressing the OneTouch Buttons . . . . . . . . . . . . . . . . . 19
Scanning from the Button Panel on the Screen . . . . . . . . . . . . . . . . 20
About the OneTouch Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
About the Configuration Dialog Box . . . . . . . . . . . . . . . . . . . . . 22
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting New Options for the Buttons . . . . . . . . . . . . . . . . . . . 25
Creating New Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting Scan Settings and Page Settings . . . . . . . . . . . . . . . . . 27
Setting Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

TABLE OF CONTENTS

Scanning from the PaperPort Software . . . . . . . . . . . . . . . . . . . . . . 35
Scanning an Item with the Twain Button . . . . . . . . . . . . . . . . . 36
Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . 39
Getting Help with the PaperPort Software . . . . . . . . . . . . . . . . 40
About the Predefined Scan Settings in PaperPort . . . . . . . . . . . . 41
Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Visioneer OneTouch Scanner Specifications . . . . . . . . . . . . . . . . . . 43

WELCOME
Congratulations on purchasing your Visioneer OneTouch flatbed
scanner. With your scanner, you can quickly scan paper documents and
color photos to place their electronic images on your computer.

PLEASE USE THE PROPER SECTION OF THIS GUIDE
You can connect the scanner to either your computer’s USB port or to
the parallel port. This guide contains instructions for both ports:
■

For USB port instructions, see page 5.

■

For Parallel port instructions, see page 10.

WHAT’S IN THE BOX
Before starting the installation, check the contents of the box to make
sure that all parts are included. If any items are missing or damaged,
contact the dealer where you purchased the scanner.

USB cable
Parallel cable

Visioneer OneTouch Scanner

Software CD

Installation guide

Power supply

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

THE VISIONEER ONETOUCH 8100 SCANNER
Document cover

Document pad

Glass
Reference frame
OneTouch button panel

On/Off light

On/Off switch
Power jack
ADF/TPA port
Host Parallel port
USB port (behind sliding latch)
Printer Parallel port

THE VISIONEER ONETOUCH 8100 SCANNER

Document cover. Close the document cover after placing items on the scanner glass.
Document pad. Helps to secure the document in place on the scanner glass.
Glass. Place items face down on top of the glass in the upper left corner.
Reference frame. Place items face down within this frame. Markings on the border of the frame
show where to align various paper sizes.
OneTouch buttons panel. Press a OneTouch button to scan, copy/print, email, or scan with
custom settings.
On/Off light. Shows that the scanner is receiving power.
On/Off switch. Turns the scanner’s power on and off.
Power jack. Plug the scanner power cord into this jack.
ADF/TPA port. A port for an optional Auto Document Feeder (ADF) and a Transparency
Adapter (TPA) for scanning transparencies. Please visit our web site at www.visioneer.com for
more information about acquiring these optional devices.
Host Parallel port. If you’re connecting the scanner to the computer’s parallel port, plug one
end of the parallel cable into this port. Plug the other end of the parallel cable into the
computer’s parallel port. Do not use this port when connecting with the USB cable.
USB port. A sliding latch covers and protects the USB port. Slide the latch to the side to see the
USB port. Plug one end of the USB cable into this port; plug the other end into a USB port on
the computer or keyboard. Do not use this port when connecting with a parallel cable.
Printer Parallel port. Use this port only if you connect a printer directly to your computer.
Unplug the printer from the computer and plug it into this parallel port on the scanner.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

WHAT YOU NEED
To use the OneTouch scanner and software, you need the following:
■ IBM PC (or 100-percent compatible) Pentium or equivalent
■

Microsoft Windows 95, Windows 98, or Microsoft NT 4.0

■

One available Universal Serial Bus (USB) port or one available parallel
port on your computer; Microsoft Windows 98 is required when using
the USB port

■

32 megabytes (MB) or more of available internal memory (RAM)

■

70 MB of free hard disk space

■

A VGA or SVGA monitor. Recommended settings for your monitor
are as many colors as possible—High Color (16-bit), True Color
(24-bit or 32-bit). Set the resolution to at least 800 by 600 pixels.
To set your monitor’s colors and resolution, open the Windows
Control Panel, double-click Display, and then click the Settings tab.

■

A CD-ROM drive

GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The CD also includes your PaperPort User’s Guide. This guide provides
more detailed information about the PaperPort software’s features.
Please see the CD to view or print the guide.

INSTALLING TO A USB PORT

Part 1: Installing
INSTALLING TO A USB PORT
This section of the guide contains instructions for connecting your
OneTouch scanner to a USB port. Please see “Installing to a Parallel
Port” on page 10 to connect the scanner to a parallel port.

STEP 1: INSTALLING THE PAPERPORT SOFTWARE
Note: You must install the PaperPort software before connecting the
scanner to the computer. Otherwise the correct software to run your
scanner will not be installed and it may not scan properly.
The PaperPort CD includes all the necessary installation files, as well as
PaperPort software files and other software files.
The CD also includes the PaperPort User’s Guide. You can read the guide
from the CD, or print a copy directly from the CD.
To install the PaperPort software:
1. Start Microsoft Windows 98 and make sure that no other
applications are running.
Microsoft Windows 98 is required to connect the scanner to a USB
port.
2. Insert the PaperPort CD into your computer’s CD-ROM drive.
The CD automatically starts.
Note: If the PaperPort CD does not automatically start, make sure
the CD drive’s door is completely shut. If the CD still doesn’t start,
the Autorun option on your computer is turned off. Click the
Windows icon named My Computer. The window shows the drives
available on your computer. Double-click the icon for your
CD-ROM drive to see the list of files on the CD. Double-click the
file named START32.EXE. The CD starts.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

3. Follow the instructions on the screen to install the PaperPort
software on your computer.
During installation, a message tells you to connect the scanner to
the computer.

4. Follow the steps in the next section to connect the scanner.
When you’re finished, click Finish in the dialog box above.

STEP 2: CONNECTING TO A USB PORT
The OneTouch scanner connects to any available USB port. Check your
computer’s user’s guide for its USB port locations.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.

INSTALLING TO A USB PORT

To connect the OneTouch scanner to a USB port:
1. Plug one end of the USB cable into an available USB port.
Some newer computers also have keyboards with USB ports.
You can plug the scanner into the keyboard instead of the USB port
on the computer.
2. Slide the latch on the back of the scanner to uncover its USB port.

USB port

3. Plug the other end of the USB cable into the scanner’s USB port.

If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
4. Plug the power adapter cable into the power jack on the back of the
scanner.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

5. Turn the scanner over to see the locking tab on the bottom.
Slide the locking tab to the unlocked position.
Unlocked position

6. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.

Power cord

USB cable

INSTALLING TO A USB PORT

7. Turn on the power to the scanner. The amber light comes on
indicating the scanner is receiving power.

Power On/Off switch

Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
When the software is finished loading, the Finish button on the
dialog box on the computer screen becomes active.
8. Click the Finish button.
The scanner’s on/off light turns from amber to green when the
scanner and computer are communicating properly.
That completes the steps to connect your scanner to the computer.
9. Remove the CD from the computer and store it in a safe place.
10. Turn to “Checking Out Your Scanner” on page 14 to continue
setting up your OneTouch scanner.
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but always remember to unlock it before
scanning. The scanner will not scan when locked.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

INSTALLING TO A PARALLEL PORT
This section explains how to connect the OneTouch scanner to a
parallel port.

STEP 1: CONNECTING TO A PARALLEL PORT
The OneTouch scanner connects to any available parallel (LPT) port on
the back of your computer.
To connect the scanner to a parallel port:
1. Save any open files, and then shut down Windows.
2. Turn off the power to your computer.
3. If a printer is already attached to your computer’s parallel port,
unplug the printer cable from the computer. If you don’t have a
printer attached to your computer, skip this step.

4. Plug one end of the scanner cable into the port on the back of the
scanner marked “Host.”

INSTALLING TO A PARALLEL PORT

5. Plug the other end of the scanner cable into the parallel port on the
back of your computer.

On some older computers the serial port and parallel port both
have 25-pin connectors that fit the scanner cable. Please make sure
you plug the scanner cable into a parallel port.
6. If you unplugged a printer from the parallel port earlier, plug it into
the “Printer” port on the scanner.

7. Plug the power adapter cable into the jack on the scanner.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

8. Turn the scanner over to see the locking tab on the bottom.
Slide the locking tab to the unlocked position.
Unlocked position

9. Plug the power adapter into an AC (wall) outlet.
The following diagram shows the scanner connected to a computer.

Power cord

Parallel cable to
the computer

Parallel cable to
the printer

INSTALLING TO A PARALLEL PORT

10. Turn on the power to the scanner.

Power On/Off switch

The amber light comes on indicating the scanner is receiving power.
11. Turn on your computer. You’re now ready to install the software.
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but always remember to unlock it before
scanning. The scanner will not scan when locked.

STEP 2: INSTALLING THE PAPERPORT SOFTWARE
The PaperPort CD contains the PaperPort software files, all the
necessary installation files, and files for other applications as well.
The CD also includes the PaperPort User’s Guide. You can read the guide
from the CD, or print a copy from the CD.
To install the PaperPort software:
1. Start Microsoft Windows and make sure that no other applications
are running.
2. Insert the PaperPort CD into your computer’s CD-ROM drive.
The CD automatically starts.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Note: If the PaperPort CD does not automatically start, make sure
the CD drive’s door is completely shut. If the CD still doesn’t start,
the Autorun option on your computer is turned off. Click the
Windows icon named My Computer. The window shows the drives
available on your computer. Double-click the icon for your
CD-ROM drive to see the list of files on the CD. Double-click the
file named START32.EXE. The CD starts.
3. Click the PaperPort Software button and follow the instructions
on the screen.
After the PaperPort software is installed on your computer, you can
click the appropriate buttons on the CD to install the other
applications on the CD or print the PaperPort User’s Guide.
4. When you’re finished installing the software, remove the CD from
the CD drive and store the CD in a safe place.
5. Restart the computer. The scanner’s on/off light turns green
indicating that the computer and scanner are communicating.
That completes the installation. Please see “Checking Out Your
Scanner” on page 14 to continue setting up your OneTouch scanner.

CHECKING OUT YOUR SCANNER
The OneTouch scanner software adds the scanner icon to the Windows
taskbar (at the bottom right corner of the computer screen). If the
scanner is properly connected, the scanner icon looks like the one in this
figure.
Scanner Icon

If the icon has a red X through it, the scanner is not properly connected.
See the next section, “If the Scanner Is Not Properly Connected,” for
the steps to fix the problem.

CHECKING OUT YOUR SCANNER

To check the status of the scanner:
1. Place the mouse pointer on the scanner icon in the Windows
taskbar.
2. Right-click the icon. The shortcut menu appears.

3. Choose About from the shortcut menu.
A dialog box confirms that the scanner is properly connected.
4. Click OK to close the dialog box.
That’s it. Your scanner is ready to scan.
See “Scanning by Pressing the OneTouch Buttons” on page 19.
Note: The scanning lamp under the scanner’s glass needs to warm up
before you can scan. A status message lets you know when the lamp is
ready. The lamp then remains ready so you don’t have to wait for it to
warm up each time you want to scan. To conserve electricity and
prolong the life of the scanner, you can set the length of time for the
lamp to remain lit before powering down. See “Setting Preferences”
on page 32.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

IF THE SCANNER IS NOT PROPERLY CONNECTED
If the scanner icon on the Windows taskbar has a red “X” through it, the
scanner is not properly connected.

Check for one of these possible problems:
• Is a cable loose or not plugged in securely? Inspect all cable
connections. Make sure all the cables are plugged in securely.
• Is the scanner’s power light on? Turn on the scanner’s power. If the
light still doesn’t come on, plug the power adapter into another
electrical outlet.
• Is the scanner’s locking tab in the locked position? Slide the
locking tab to the unlocked position. If you tried to scan with the
scanner locked, you must restart your computer after unlocking the
scanner.
• If you connected the scanner to a parallel port, are you using an
older computer that has 25-pin connectors for both serial and
parallel ports? You may have plugged the scanner cable into a serial
port instead of the parallel port. Remove the scanner cable from the
serial port and plug the cable into the parallel port.
• If you connected the scanner to a parallel port, are other devices
“daisy-chained” to the parallel port? If so, the scanner must be the
first one connected to the computer. Plug the scanner into the
computer’s parallel port first, then plug the next device into the
scanner.
• Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
Please see the Readme file in the PaperPort directory on your computer’s
hard drive. The Readme file contains additional information that may
help you diagnose problems connecting the scanner.

CHECKING OUT YOUR SCANNER

To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.

2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection.
The scanner icon will no longer have a red X through it, and you’re
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Part 2: Scanning
THREE WAYS TO SCAN
You can scan items by pressing a OneTouch button, by clicking a
button on the screen, or from the PaperPort software (or other Twain
software).
• Scan with the Scanner Buttons
Press a button on the scanner’s front panel.

• Scan from the Screen
Click the scanner icon on the Windows taskbar. A panel representing
the scanner buttons appears. Click a button on the panel on the
screen.

• Scan from the PaperPort Software (or Other Twain Software)
To scan from the PaperPort software, start the software, and then
click the Twain icon on the PaperPort Command Bar. You can also
scan from other Twain software.
See “Scanning an Item with the Twain Button” on page 36 for details.

SCANNING BY PRESSING THE ONETOUCH BUTTONS

SCANNING BY PRESSING THE ONETOUCH BUTTONS
Pressing a scanner button scans the item, and then sends the image
either to the printer, or to a software application on your computer.
To scan by pressing a button on the scanner:
• Place an item to scan on the glass, face down, and press one of the
scanner buttons.
The scanner starts scanning the item. A message just above the
Windows taskbar shows the status of the scanning.

When scanning is complete, the status message also shows the
destination application. In the sample below, the scanned image
appears on the PaperPort Desktop.

During scanning, the scan progress window shows a small copy of the
image, as illustrated by this example:

When the scan is complete, the scanned image appears in the
destination software.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

SCANNING FROM THE BUTTON PANEL ON THE SCREEN
Scanning from the button panel on the screen is just like pressing a
scanner button, except you click the button on the screen. The scanner
scans the item, and then sends the image either to the printer, or to a
software application on your computer. This method of scanning is
especially helpful if the scanner is not located close to your computer.
To scan from the screen:
1. Place an item to scan on the glass, face down, and click the scanner
icon on the Windows taskbar.
The scanner button panel appears on the screen.

2. Click the button you want to use to scan.
The scanner starts scanning the item; the messages about the
scanning appear above the Windows taskbar; the progress window
shows the image as it is scanned. When the scan is complete, the
scanned image appears in the destination application.
The icons on the buttons indicate the destination application for the
scanned image. For example, in the illustration above, the icon on the
email button is for the email application, MS Outlook. When you click
the email button, the item is scanned, and then MS Outlook opens.
In this case, the scanned image automatically becomes an attachment to
send with an email message.
A question mark icon on a button means your computer does not have
an application that corresponds to that button’s functions. For example,
if your computer does not have an e-mail application, the eMail button
will have a question mark icon on it.

ABOUT THE ONETOUCH BUTTONS

ABOUT THE ONETOUCH BUTTONS
The OneTouch buttons are preconfigured to scan items at various
settings, and then send the scanned image to a preselected software
application—called the Destination Application. You can change the
settings for each button except the Stop/Cancel button. See “About the
Configuration Dialog Box” on page 22.

The following table lists the scanner’s preconfigured settings:
Button

Preconfigured Settings

Scan

Scans the item as an 8.5" x 11" color page and displays
it in PaperPort

Copy/Print

Prints the scanned item in black and white on your
printer/copier at the printer/copier’s default resolution

Scans the item as a color photo and attaches it to a new
email message in your email application

Custom

Scans the item as a color photo and displays it in an
image processing application

Stop/Cancel

Cancels the scan in progress.

Note: If a button is not preconfigured, the Configuration dialog box
appears when you press that button so you can configure it manually.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

ABOUT THE CONFIGURATION DIALOG BOX
The Configuration dialog box shows the current settings for each
scanner button.
The tabs across the top of the dialog box correspond to the buttons.
Clicking a tab shows the current settings for the corresponding button
on the scanner.
For example, the following figure shows the current settings for the
Custom button because the Custom tab is selected. The Custom button
is set up to scan the item with the configuration named Photograph for
Editing, and then after the scanning is finished, to open Microsoft Paint
to display the scanned image. The Format and Page(s) setting is to scan
as a bitmap for a single page item.
Click this
tab to set
preferences.
Select a software
application to
send the scanned
image to that
application.

Select a
setting for
scanning
the item.

Select format
and page(s)
options for the
button.

See “Setting Preferences” on page 32 to set Preferences.

ABOUT THE ONETOUCH BUTTONS

To display the Configuration dialog box:
1. Right-click the scanner icon.
Scanner icon

The shortcut menu appears.
2. Choose Configure on the shortcut menu.

The Configuration dialog box appears. The options on the
Configuration dialog box are:
Select Destination—the list of applications that can open to display the
scanned image. Select the application that you want to automatically
open to display or process the scanned image.
Select Configuration—the list of the button’s scan configurations.
The configuration settings include: color, black and white, or grayscale,
resolution in dots per inch (dpi), page size, brightness, and contrast.
To see the details about a configuration, click its icon in the list.
Click the icon again to close the detailed information:
Clicking an icon expands
the configuration to show
its settings

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Select Format and Page(s)—a set of options for selecting a format for
the scanned image and whether to scan a single page or multiple pages.
The formats are bitmap and PaperPort. Use PaperPort for scanning any
item. Bitmap is usually for photos or artwork. The page icons represent
single or multiple page scanning.
Scan single page

Scan multiple pages

Scan multiple pages and
stack them on the
PaperPort Desktop

Properties—displays a dialog box for selecting options about the
destination application for the scanned image. Each destination
application has its own properties dialog box.
Folder Copy—displays a dialog box for selecting the folder to use for
storing a copies of the scanned images.

GETTING HELP
You can get help with the scanner’s features or any of the options on the
Configuration dialog box using either of the following methods:
■

When the Configuration dialog box is displayed, press the F1 key on
your keyboard

■

Click the Help button at the top right corner of the Configuration
dialog box
Help button

ABOUT THE ONETOUCH BUTTONS

SELECTING NEW OPTIONS FOR THE BUTTONS
You can select a new destination application, configuration, and image
format for a scanner button to optimize it for the type of scanning you
want to do. You use the Configuration dialog box to select new options.
To select new options for a scanner button:
1. Press and hold down the button that you want to change (except the
Stop/Cancel button).

The Configuration dialog box appears.
The tab of the button whose options you want to change is already
selected. If the tab is not selected, click it.
You can also right-click the scanner icon in the Windows taskbar to
see the shortcut menu, and then choose Configure to display the
Configuration dialog box.
2. Scroll the list of applications in the Select Destination list and click
the new application you want to use to view and work with the
scanned image.
Note: If you select a word processing program such as Microsoft
WordPad or Microsoft Word and a configuration for OCR, the text
in scanned images is automatically converted to word processing text
by the optical character recognition (OCR) software that you receive
with the scanner. The converted text then appears in the selected
destination application.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

3. Click a selection in the Select Configuration list to choose a new
scan configuration for the selected scanner button.
The configurations in the list are preset for the application you
select in the application list. If you select another application, the
configurations are for that application.
If you want to select a configuration prior to scanning, click the
option, Configure before Scan. When you press a scanner button,
the Visioneer Scan Manager dialog box appears first and you can
select a configuration before scanning. See “Scanning an Item with
the Twain Button” on page 36 for details.
4. Select one of the Format and Page(s) options for the button.
5. Click OK.
Now when you press the scanner button, it scans the image using
the new configuration settings and displays the scanned image in
the new destination application.
Note: The Configuration dialog box is also available from the
scanner icon on the Windows taskbar. Click the icon to see the
scanner buttons panel. Click a button on the panel with the right
mouse button (don’t click with the left mouse button; clicking with
the left mouse button starts scanning). The Configuration dialog box
appears.

CREATING NEW CONFIGURATIONS
You cannot change settings such as brightness or contrast of the preset
configurations. To scan with settings other than those offered by the
preset configurations, you must first create a new configuration and
then use it to scan.
To create a new configuration, click the New button. You can also click
Copy to copy a preset configuration, change its settings, and then save it
under a new configuration name. To see Help for creating a new
configuration, display the Configuration dialog box, and then click the
Help button at the top right corner of the Configuration dialog box or
press the F1 key on your keyboard.

ABOUT THE ONETOUCH BUTTONS

ADJUSTING SCAN SETTINGS AND PAGE SETTINGS
When scanning using a configuration that you created yourself, you can
adjust that configuration’s scan settings and page settings. For example,
if the scanned image is too dark, you can adjust the brightness of the
scan setting.
Note: You cannot change the scan settings or page settings for any of
the predefined scan configurations. You can only adjust settings for
scan configurations that you create yourself. See the section above,
“Creating New Configurations”.
To adjust the scan settings and page settings:
1. Press and hold down a button on the scanner.
The Configuration dialog box appears.
The selected tab on the dialog box corresponds to the button you
pressed. You can click the other tabs for the other buttons.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

2. In the Select Configuration list, click the configuration that you
want to adjust.
For example, the following figure shows a configuration named
Photograph for Editing (which you would have created earlier).

3. Click the Edit button.
The dialog box appears for adjusting the scanning settings of the
selected configuration.

ABOUT THE ONETOUCH BUTTONS

4. Adjust the scan settings that you want.
Mode—Select Black/White to scan in black and white.
For example, letters and memos are usually scanned in black and
white. Select Grayscale to scan items such as documents containing
drawings or black and white photographs. The scanning produces
an image in varying shades of gray. Select Color to scan color
photographs and other color items.
Resolution—Drag the slider to the right or left to adjust the dots
per inch (dpi) of the resolution. The maximum resolution is
600 dpi; the minimum is 50 dpi. The higher the dpi setting, the
sharper and clearer the scanned image. However, higher dpi settings
take longer to scan and produce larger files for the scanned images.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image.
The Contrast setting does not apply to the Black/White mode.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

5. Click the Page Settings tab to adjust the scan page settings.

Page Size—Choose a page size from the drop-down list.
The outlines on the picture represent the various page sizes.
Clicking one of those outlines also selects it as the page size for the
scan. If you select the Custom option from the drop-down list,
boxes appear in place of the picture. Enter the horizontal and
vertical page dimensions in the boxes.
AutoCrop—Select this option to let the scanner automatically
determine the size of the item being scanned. For example, if you
put a photo in the middle of the glass, the scanner will
automatically determine the size of the photo. When AutoCrop is
selected, the scanner makes two passes—the first pass senses the
item’s size, and the second pass scans the image. This option
overrides the Page Size menu selection.
DeScreen—Select this option when scanning a picture from a
newspaper or magazine article, or other item that contains images
with patterns or dots. Scans of patterns or dots sometimes have a
distorted or wavy appearance. The scanner scans the item to
compensate for the patterns and dots, and produces a clearer image.

ABOUT THE ONETOUCH BUTTONS

The scanning may slow down a bit when this option is selected.
You don’t need to select this option when scanning photographs.
The DeScreen setting does not apply to the Black/White mode.
Gamma—Drag the slider to improve how the colors in a scanned
image look on your monitor. Gamma correction allows you to
achieve precise color matching. Because the computer cannot
always transmit the exact color information to the hardware, you
may have to make some color adjustments using the Gamma
feature.
The default Gamma setting works fine in most cases and normally
does not need to be adjusted.
6. Click OK.
The Configuration dialog box reappears. Make sure the
configuration you just defined is selected.
7. Click OK on the Configuration dialog box.
The new configuration and its adjusted settings now apply to the
button whose tab is selected at the top of the Configuration dialog
box.
Note: If you select the Copy/Print button, the dialog box for editing
and adjusting the settings will have a Device tab for selecting options
for a printer or copier. See the Help for more information.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

SETTING PREFERENCES
The preferences apply to each button and to the scanner.
To set preferences:
1. On the Configuration dialog box, select the tab for a button to set
its preferences.
2. Click the Preferences tab on the Configuration dialog box.
Preferences tab

The Preferences dialog box appears. The dialog box shows which
button you selected for new preferences.
Button for which you are setting preferences

If the Button tab on the Preferences dialog box is not selected,
click it.
Show All Destinations—Clicking this option automatically selects
all the destination applications categories. When you click the
button’s tab on the Configuration dialog box, its list of destination
applications include all of the applications on your computer that

ABOUT THE ONETOUCH BUTTONS

fall into these categories. For example, the destination applications
for the email button are usually email applications. By selecting the
Show All Destinations option as the preference for the email
button, all the other types of applications are included in the list of
email destination applications.
Select Destinations—Select this option to individually choose the
types of applications to include in the button’s list of destination
applications. Click in the boxes for the types of applications to
include in the button’s list.
Show Scan Progress Window—Select this option to see the
window that shows a rendition of the image during the scanning.
See the sample on page 19.
3. Click the General tab to set preferences for the scanner.

Show Status Window—Select this option to see the small window
at the bottom right corner of the screen that shows the status of the
scanning and other information as shown in this sample:

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Show Scanner Icon in Windows Taskbar—Select this option to
see the small icon representing the OneTouch scanner in the
Windows taskbar

Scanner Lamp turns off—These options control when the scanner
lamp powers goes off.
■

After idling for xx minutes—Select this option to
automatically turn off the lamp if the scanner hasn’t been used
for the specified time. This option saves energy and extends the
lamp’s life. Click in the box and enter the number of minutes
for the lamp to remain idle before turning off. If you scan when
the lamp is off, it warms up before scanning resumes.

■

On System Standby/Shutdown—Select this option to turn off
the lamp when you turn off your computer, or when the
computer’s energy saver option automatically puts the computer
into standby mode.

Folder for Temporary Images—Click the Folder button and then
select a folder for the scanner’s temporary images. During scanning,
a temporary file contains scan information about the image.
Because temporary image files can sometimes be large, select a
folder that has sufficient disk space available.
4. Click OK.

SCANNING FROM THE PAPERPORT SOFTWARE

SCANNING FROM THE PAPERPORT SOFTWARE
Instead of using a scanner button, you can scan directly from the
PaperPort software. This is particularly helpful when you’re using
PaperPort to file and save your scanned items.
Note: You can also scan directly with other software that meets the
Twain standards for scanning, which includes many graphics and
imaging applications available for your computer. The following steps
explain how to set up and scan from the PaperPort software but you
use the same basic processes with other Twain software.
To scan from PaperPort, you must first do a one-time-only set up of the
software.
To set up the PaperPort software with the scanner:
1. If the PaperPort software isn’t currently running, double-click the
PaperPort icon on the Windows desktop to start it. The PaperPort
Desktop appears.
2. From the PaperPort File menu, choose Select Source. The Select
Source dialog box appears, and shows your Visioneer OneTouch
scanner (as well as all other Twain devices installed on your
computer).

3. Choose the Visioneer OneTouch scanner option, and then
click Select.
Note: You don’t need to set up the scanner again unless you change
the source to some other Twain device, such as a digital camera.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

SCANNING AN ITEM WITH THE TWAIN BUTTON
The following steps explain how to scan an item using the Twain button
in the PaperPort software. You can scan many types of items, from small
business cards to A4-sized pages.
Note: Your Visioneer OneTouch scanner is initially set to scan from
the PaperPort software with the setting Color Document—Faster.
To scan a black-and-white image, select one of the other settings.
To scan at a higher resolution for a color image, select Color
Document—Better Quality. However, scanning at a higher resolution
creates a larger file size and takes longer to scan. To minimize the file
size and the time required to get a better quality scan, select just the
area of the item that you want to scan.
To scan an item:
1. Open the scanner cover, place the item face down onto the lower
left edge of the scanner glass, and close the cover.
2. If PaperPort isn’t running, double-click the PaperPort icon on the
Windows Desktop to start it. The PaperPort Desktop appears.
3. Click the Twain icon on the Command Bar, or choose Acquire
from the File menu.
Note: You can also scan from other applications that have the Twain
capability. See the user’s guides that you received with those
applications for their specific steps to scan.
The Visioneer Scan Manager dialog box appears.

SCANNING FROM THE PAPERPORT SOFTWARE

Select one of these preset
options if it’s appropriate for
how you want to use the
scanned item.

If you don’t want to use a
preset option, select new
settings here to manually
configure the scan.

Click Preview to see what
the image will look like.
The Preview image appears in
the window.
If the image is what you
want, click Scan.
If not, adjust the settings or
select a new preset option
and click Preview again.

4. Select the options that you want for the scan.
Scan Page For—Select one of these preset options if you want to
use it for scanning. These options are optimized for the various uses
of scanned images, such as scanning for editing text or scanning in
color. The symbols next to the options indicate black and white,
grayscale, or color. For more information about these settings,
see “About the Predefined Scan Settings in PaperPort” on page 41.
If you don’t want to use one of these preset options, you can
manually select the scan configuration options. Note that when you
select a preset option scan configuration settings are for that preset
option. You can also create your own custom configurations.
See the Help for details.
Scan Configuration—Use this section of the dialog box to
manually select scan options for the image.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Mode—Choose a scan mode from the drop-down menu to select
the mode for scanning. The symbols next to the menu options
indicate black and white, grayscale, or color.
Res—This is the resolution setting for the scan in dots-per-inch
(dpi). The higher the dpi, the sharper the image. Higher dpi
settings also produce larger files sizes. Usually the higher resolution
settings are used for precision work, such as photographs or fine
artwork. Choose one of the resolution settings from the list.
Size—Choose the page size for the image. If you want to use one of
the preset sizes, choose the size from the list. If you want to create a
custom size, click the picture window and drag the mouse. A dotted
box on the window indicates the page size, and the two number
boxes—with the vertical and horizontal symbols next to them—
show the actual page size in inches. You can also enter the vertical
and horizontal sizes in those two number boxes.
AutoCrop—Select this option to let the scanner automatically
determine the size of the item being scanned. For example, if you
put a photo in the middle of the glass, the scanner will
automatically determine the size of the photo. When AutoCrop is
selected, the scanner makes two passes—the first pass senses the
item’s size, and the second pass scans the image. This option
overrides the selections for Size.
Adv. Settings—Click this button to see advanced settings for
scanning. See the Help for details.
5. Click the Preview button.
The scanner scans the item and displays a preview using the options
you selected.
6. Review the image to make sure it’s what you want. Readjust the
settings if necessary.
7. (optional) To preview the image again, click the Preview button.

SCANNING FROM THE PAPERPORT SOFTWARE

8. When you’re satisfied with the image settings, click the Scan
button.
The scanner now re-scans the item and displays the final image as a
thumbnail on the PaperPort Desktop. The small icon in the lower
left corner of the thumbnail indicates the sample photo was
scanned as a bitmap image.

Thumbnail
image

Bitmap icon

Please see the PaperPort Getting Started Guide and PaperPort User’s Guide
on the CD for more information about using the PaperPort software.

ADJUSTING THE BRIGHTNESS AND CONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

You can adjust the brightness and contrast at which grayscale and color
items are scanned. You can only adjust the brightness for black-andwhite items. If an item is currently displayed in the preview area, the
changes you make using the Brightness and Contrast sliders are reflected
in the preview item.
To adjust the brightness and contrast:
1. Click the Twain icon on the Command Bar, or choose Acquire
from the File menu.
The Visioneer Scan Manager appears.
2. Click the Adv. Settings button.
The Advanced Settings dialog box appears.

Drag to adjust brightness
Drag to adjust contrast

3. Drag the Brightness slider to the left to make the item darker or to
the right to make the item lighter. When you release the mouse
button, the preview item shows the change.

GETTING HELP WITH THE PAPERPORT SOFTWARE
The PaperPort software includes a complete set of help topics that
answer questions each feature of the software.
■

To see help information, press the F1 key, or from the Help menu,
choose PaperPort Help Topics to display the Help Topics window.

SCANNING FROM THE PAPERPORT SOFTWARE

ABOUT THE PREDEFINED SCAN SETTINGS IN PAPERPORT
Selecting the proper scan setting before final scanning provides the best
results for a scanned item. The scan setting determines the sharpness of
the item and the number of possible shades of gray or color.
These selections also affect the speed of the scan and the file size.
The following table describes PaperPort’s predefined scan settings.
Scan Page For

Default Setting

To Scan

Description

Faxing, Filing,
or Copying

Black-and-white
200 dpi

Newspaper and
magazine articles,
receipts, forms, and
other text items

Provides the fastest scan time
and smallest file size.

Editing Text
(OCR)

Black-and-white
300 dpi

Business letters,
contracts, memos, and
other documents that
you want to edit

Enhances the use of OCR
software for converting
scanned text to editable text.
Provides higher quality and a
larger file size than the Faxing,
Filing or Copying scan setting.

Black & White
Photo

Grayscale
100 dpi

Black-and-white
photos

Provides the best setting for
black-and-white photos.

Color Photo—
Faster

Color
100 dpi

Color pages with
many graphics, or
mixed graphics and
text, line art, or photos
that require a quick
scan

Creates a reasonable scanned
color item in a file that is not
too large. PaperPort’s default
setting.

Color Photo—
Better Quality

Color
200 dpi

Photographs and color
items

Provides the ideal setting for
color items, item editing,
desktop publishing, and high
quality output. Results in a
color scan with slower scan
time and a larger file size.

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

4. Drag the Contrast slider to the left to decrease the contrast or to
the right to increase the contrast.
See the Help for more details about the Advanced Settings dialog box.

CLEANING THE SCANNER GLASS
Scanning items that have excessive amounts of dirt or dust may dirty the
scanner’s glass. To ensure the best quality scanned item, wipe the
scanner glass with a soft clean cloth to rid the glass of dust or other
debris.

VISIONEER ONETOUCH SCANNER SPECIFICATIONS

VISIONEER ONETOUCH SCANNER SPECIFICATIONS
Bit Depth
Scanning resolution

Maximum Item sizes
Scanner dimensions
Height
Width
Length
Weight
Operating temperature
Relative humidity
Power supply
Input voltage/frequency

Output voltage/watt
Safety and agency certifications
Hardware warranty

36-Bit color (internal), 10-Bit gray
(internal), 1-Bit line art/text
Optical resolution: 600 x 1200 dpi
Maximum resolution (interpolated):
9600 x 9600 dpi
8.5 x 11.69 inches (21.6 x 29.7 cm)
3.4 inches (8.5 cm)
11.4 inches (29.0 cm)
17.3 inches (44.0 cm)
5.7 pounds (2.6 kg)
50°–104° F (5°–35° C without
condensation)
20%–80% (@35° C without
condensation)
100 Vac, 50/60 Hz (Japan)
120 Vac, 60 Hz (North America)
230 Vac, 50 Hz (Europe)
12 V DC, 15 watt maximum
UL, ULc, GS, FCC Class B,
VCCI Class 2, CE
One-year limited warranty

VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 1999:08:19 20:41:03
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Author                          : 
Title                           : Book
Creator                         : FrameMaker 5.5.6
Modify Date                     : 1999:12:14 11:44:36-08:00
Page Count                      : 48
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

Visioneer Scanner 8100 Users Manual Book

If not then 8100_Install.OT3.EN Manual: ://support.visioneer.com/s/Manuals/8100/8100_Install.OT3.EN

8100 to the manual ba12e8b4-33f8-4e86-a7a8-2765092b2fa5

Navigation menu

Versions of this User Manual:

Views

Navigation