Visteon 12NBTDC1 Bluetooth Module User Manual Annex to

Download:
Mirror Download [FCC.gov]
Document ID	1638923
Application ID	A6AgwfDFE3uin5r19keolA==
Document Description	Annex to User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.46kB (43262 bits)
Date Submitted	2012-02-17 00:00:00
Date Available	2012-02-17 00:00:00
Creation Date	2011-12-15 13:54:43
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2011-12-15 13:54:43
Document Title	Microsoft Word - VBTDC1.0_Users_Manual_Declaration_Statements_FCC_IC.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	TSANSOUC

Terry SanSouci
Product Assurance Engineer
Electronics Product Group
Visteon Corporation
Suite: 25.2.025
One Village Center Drive
Van Buren Township, MI 48111
Tel: 734.710.7137
Fax: 734.736.5612
Email: tsansouc@visteon.com
See the possibilities
December 15, 2011
Re: Users Manual Declaration Statements
Model Name: VBTDC1.0
FCC ID: NT8-12NBTDC1
IC: 3043A-12NBTDC1
To Whom It May Concern:
The product integrator of the model name above must place the following compliance statements
on their end product label and in a prominent location in their users manual for the North
American Market.
FCC & IC statements (§ 15.19 Labelling Requirements)
This device complies with part 15 of the FCC and Industry Canada Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
The FCC statement listed below (§ 15.21 Information to the User) shall also be placed in a
prominent location in the end product integrator’s user manual under relevant title “CAUTION
TO USERS” or “FCC WARNING” or “NOTE”
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
**VISTEON CONFIDENTIAL**
Page 1 of 2
Terry SanSouci
Product Assurance Engineer
Electronics Product Group
Visteon Corporation
Suite: 25.2.025
One Village Center Drive
Van Buren Township, MI 48111
Tel: 734.710.7137
Fax: 734.736.5612
Email: tsansouc@visteon.com
See the possibilities
December 15, 2011
Re: Users Manual Declaration Statements
Additionally, the ID numbers for the model name above must be included on the end product
integrator’s label and in their users manual as follows.
“Contains FCC ID: NT8-12NBTDC1”
“Contains IC: 3043A-12NBTDC1”
If you have any questions, please feel free to contact me at the address shown above.
Thank you for your attention to this matter.
Terry SanSouci
Visteon Corporation
Product Assurance Engineer
December 15, 2011
**VISTEON CONFIDENTIAL**
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2011:12:15 13:54:43
Modify Date                     : 2011:12:15 13:54:43
Title                           : Microsoft Word - VBTDC1.0_Users_Manual_Declaration_Statements_FCC_IC.doc
Creator                         : PScript5.dll Version 5.2
Author                          : TSANSOUC

EXIF Metadata provided by EXIF.tools