Visteon 13NDC1-5 Bluetooth module User Manual FCC statment

Visteon Corporation Bluetooth module FCC statment

Contents

FCC statment

Page 1 of 2 See the possibilities Terry SanSouci Product Assurance Engineer Electronics Product Group Visteon Corporation Suite: 25.2.025 One Village Center Drive Van Buren Township, MI 48111 Tel: 734.710.7137 Fax: 734.736.5612 Email: tsansouc@visteon.com December 4, 2012 Re: Users Manual Declaration Statements Model Name: VBTDC1.5 FCC ID: NT8-13NDC1-5 IC: 3043A-13NDC15 To Whom It May Concern: The product integrator of the model name above must place the following compliance statements on their end product label and in a prominent location in their users manual for the North American Market. FCC & IC statements (§ 15.19 Labelling Requirements) This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The FCC statement listed below (§ 15.21 Information to the User) shall also be placed in a prominent location in the end product integrator’s user manual under relevant title “CAUTION TO USERS” or “FCC WARNING” or “NOTE” Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 2 of 2 See the possibilities Terry SanSouci Product Assurance Engineer Electronics Product Group Visteon Corporation Suite: 25.2.025 One Village Center Drive Van Buren Township, MI 48111 Tel: 734.710.7137 Fax: 734.736.5612 Email: tsansouc@visteon.com December 4, 2012 Re: Users Manual Declaration Statements Additionally, the ID numbers for the model name above must be included on the end product integrator’s label and in their users manual as follows. “Contains FCC ID: NT8-13NDC1-5” “Contains IC: 3043A-13NDC15” If you have any questions, please feel free to contact me at the address shown above. Thank you for your attention to this matter. Terry SanSouci Visteon Corporation Product Assurance Engineer December 4, 2012

Navigation menu