Vocollect TT600-50300 Waist worn terminal with WLAN User Manual CERTIFICATE OF COMPLIANCE
Vocollect Inc Waist worn terminal with WLAN CERTIFICATE OF COMPLIANCE
Contents
- 1. Manual
- 2. Manual online regulatory info
Manual
Rhein Tech Laboratories 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Report Number: FCC: Industry Canada: FCC ID: Model: 2003191 R0.04 Part 15.247 RSS-210 MQOTT600-50300 TT-600 APPENDIX I: MANUAL Please see the following pages. Page 41 of 68 Part #: 695096 Vocollect terminals are designed to be compliant with the rules and regulations in the locations into which they are sold and are labeled as required. Vocollect terminals are type approved and do not require the user to obtain license or authorization before using them. Changes or modifications not expressly approved by Vocollect, Inc. could void the user's authority to operate the equipment. This product may contain one of these radio devices. Please refer to the device label. Card Manufacturer and P/N Symbol-LA-3021-101-US 2Mbps 100mW H9PLA3021-100 Symbol-LA-4121-1020-US H9PLA4121 Lucent-PC24E-H-FC Worldcard CISCO-AIR-PCM350 LDK102040 Vocollect Wi-Fi 600-2400-032 Vocollect Talkman FCC ID # MQOTT600-22300 Vocollect Talkman Canadian ID # 2570A-TT600T2 MQOTT600-35300 2570A-TT600 MQOTT500-33300 230-391152A MQOTT600-40300 2570A-TT600 MQOTT600-50300 2570A-TT600-50300 The Talkman product is approved for: 1. FCC Part 15 Subpart C 2. Industry Canada RSS211 and RSS139 3. ETSI 300-328, ETSI 300-826, EN 60950 For More Information The Talkman online documentation provides detailed information about the Talkman terminal, how to use it, and how to troubleshoot problems that you may encounter. You can also contact Vocollect at: Vocollect 703 Rodi Road Pittsburgh, PA 15235 Toll-free: 866.Vocollect (866.862.6553) E-mail: support@vocollect.com Main World Wide Web page: www.vocollect.com Copyright 2001 Vocollect, Inc. All Rights Reserved Rev. 7 Talkman T2 Terminal Product Notes & Warnings • • • • • Talkman T2 terminals are assembled under strict Vocollect manufacturing guidelines. Tampering with a terminal in any manner will void published operating specifications and may void the product warranty. Never remove the battery from a Talkman terminal unless the terminal has been properly powered off. Vocollect highly recommends that the Talkman terminal be worn on the right side of the body with the terminal’s buttons on the top and its connectors toward the operator’s back. When a terminal is not in use, it should be placed properly into a terminal charger. It is recommended that a hog hair cleaning brush (or similar brush) be used to clean the contacts on the terminal. This brush is a small, inexpensive, three-row toothbrush style, general cleaning brush. It is made of natural, stiff hog hair bristles and has a 7 3/4" plywood handle. Gently brush the terminal’s contacts to clean away dirt and other obstructions that might prohibit them from making a solid connection. Product Specifications Weight Length Width Depth I/O Ports Operating Temperature Storage Temperature Drop Test Humidity 15.9 ounces (with standard battery) 6.5” (16.5 cm) 3.38” (8.5 cm) 1.5” (4 cm) • Headset port (yellow) • Maintenance port with audio out and RS-232 serial support (red) • Bar code port with RS-232 decoded bar code support (blue) -29° to 50° C (-20° to 122° F) -34° to 60° C (-30° to 140° F) The Talkman terminal meets the MIL STD 810F specification for shock and vibration. In addition the terminal has been tested to the following specifications: • 25 drops from 5 feet and 10 additional drops from 6 feet onto polished concrete • 10 drops from 5 feet at –20° F onto polished concrete Functional from 5% to 95% noncondensing Yellow play/pause button The Terminal’s LED Indicator The Talkman terminal has an LED indicator located on the terminal’s keypad. The following table details the different states of the indicator. + button − button Solid green Blinking green Blinking red and green Peripheral Connector Plate Blinking red Off On (i.e. working properly) Sleeping. Press the yellow play/pause button to turn the terminal on. Not connected to the network. Move within range of an access point. Loading template or task. Do not press any buttons when the LED is red! Off. Press the yellow play/pause button to turn the terminal on. Regulatory Policy Compliance Information This device complies with Part 15(b) of the Federal Communications Commission (FCC) Rules. LED Indicator Operator button Battery (sold separately) Button Controls Button Yellow play/pause button + / − buttons Operator button Primary Function Used to turn the terminal on and off; also used to put the terminal to sleep. Used to scroll through menu and list items. Used to perform a number of different functions, such as conducting a noise sample, changing operators, changing tasks, and retraining vocabulary words. The Talkman is nominally a Class B digital device, pursuant to Part 15 of the FCC Rules. Caution: Exposure to Radio Frequency Radiation The Talkman terminal contains an internal low-power radio. The radiated output power of the radio is far below the FCC radio frequency exposure limits. Nevertheless, the Talkman terminal shall be used in such a manner that the potential for human contact with the radio antenna during normal operation is minimized. The terminal should not be used if the case is open or if the internal antenna is exposed. When not in use, the Talkman terminal should be powered off. In addition, the terminal should be worn in accordance with the instructions for this device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classes B est conforme à la norme NMB-003 du Canada. 0336
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2004:03:02 19:29:17-07:00 Create Date : 2004:03:02 19:28:54-07:00 Title : CERTIFICATE OF COMPLIANCE Author : Systems Administrator Creator : Microsoft Word 10.0 Producer : Acrobat Distiller 4.05 for Windows Page Count : 3EXIF Metadata provided by EXIF.tools