Von Duprin 377T T BE Control For 4427 8827 F Vertical Rod Installation Instructions 377 &, 4427/8827 107735
User Manual: Von Duprin 377-&, 377-T-BE Control for 4427/8827 F Vertical Rod Installation Instructions Installation Instructions
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
*941116-00* 377-T & 377-T-BE 941116-00 Control for Metal Door Application Installation Instructions X 1. Prepare door for exit device. Seeexit device instructions for locations of holes, backset (line X-X), and center lines. 1/2” dia. 2 places 2. Prepare door for control: 3. Install cylinder if required (Figs. 1 &2). Insure cylinder cam is set for required function and replace if necessary. 11/16” R, 2 places (omit for BE) 6-1/4” 3” 1/8” CLof thumbturn 1-7/8” 1-3/8” dia. (BE only) 5. Slip rod member on top rod. 9. Apply device and test key, control, and device action. Outside face of lock stile 1” 1/4”-20 tap 2 holes X X For cutouts on inside face of door see instructions in device carton 1-1/4” 2-7/8” R 2 places 53-1/2” to finished floor 6. Install top rods (see direction for vertical rod device). 8. Tighten set screws in rod member. LHR shown RHR opposite 5/8” 4. Install control and rub plate (Fig. 2) 7. Position rod member so finger contacts cam when top latch bolt is extended. 5/16” dia. 2 places Omit cylinder for BE function A. Transfer line X-X from inside (exit device side) of door to outside (control side) of door. Use extra care if edge of door is beveled. Be sure line X-X is parallel to edge of door. B. Locate and prepare holes as indicated. X Line X-X corresponds to line X-X on exit device instructions Inside face of lock stile Device Application Schedule 4427, 8827, 8827-F Vertical Rod Exit Device Customer Service 1-877-671-7011 www.allegion.com/us © Allegion 2014 Printed in U.S.A. 941116-00 Rev. 01/14-b Socket set screw TL NL Hexagon mounting extension Mortise cylinder Cylinder locating washer Rod member Cylinder cam in this position with key removed TL Function - Control remains unlocked when key is removed NL Function - Control relocks when key is removed. Requires use of key to operate Cam For NL function replace TL cylinder plate (std. on all controls) with NL cylinder plate (included in polybag) replacing screw and washer. Note: Control must be in locked position when installing cylinder plate. Figure 1 Figure 2 Cylinder nut Rub plate
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.5-c021 79.153613, 2013/07/11-05:21:54 Format : application/pdf Subject : Description : 300 series;exit device trims;trim;88 series Modified : 2016:01:04 18:13:59Z Title : Von Duprin 377T T-BE Control for 4427 8827 8827-F Vertical Rod Installation Instructions Size : 189041 Extracted : 2016:12:06 22:32:14Z Sha 1 : 4ecb854cfb6aab74d41529acd75071f9b91fd960 Modify Date : 2014:04:29 14:01:05Z Create Date : 2014:04:29 14:01:03Z Metadata Date : 2014:04:29 14:01:05Z Creator Tool : Adobe InDesign CS6 (Windows) Rendition Class : proof:pdf Document ID : xmp.id:DFC64AA8A2CFE311A8D585F385B04391 Original Document ID : xmp.did:516915126ECCE1118A0D8AD340C27D6B Instance ID : uuid:923c7d8f-e347-499f-ab41-ee661b5b882b Derived From Rendition Class : default Derived From Instance ID : xmp.iid:EE151BAE1968E3119697A4D98FB1FD64 Derived From Document ID : xmp.did:99B7AEEF7157E311A624B9F82C882E16 Derived From Original Document ID: xmp.did:516915126ECCE1118A0D8AD340C27D6B History Action : converted History Software Agent : Adobe InDesign CS6 (Windows) History Parameters : from application/x-indesign to application/pdf History When : 2014:04:29 14:01:03.000Z History Changed : / Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2 Creator : Adobe InDesign CS6 (Windows) Keywords : 300, series;exit, device, trims;trim;88, seriesEXIF Metadata provided by EXIF.tools