Voxx Accessories SP270 Wireless Speaker User Manual

Voxx Accessories Corp. Wireless Speaker

User manual

Download: Voxx Accessories SP270 Wireless Speaker User Manual
Mirror Download [FCC.gov]Voxx Accessories SP270 Wireless Speaker User Manual
Document ID2932479
Application IDdskf2eZdAJQU0VAq0zUYxg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize271.31kB (3391345 bits)
Date Submitted2016-03-16 00:00:00
Date Available2016-03-17 00:00:00
Creation Date2016-03-13 14:58:12
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2016-03-13 14:58:12
Document TitleUser manual
Document CreatorAdobe InDesign CC 2015 (Macintosh)

QUICK
START
GUIDE
Instructions en français............ xx
Instrucciones en español.......... xx
SP270 QSG 00
Getting to know Bluetooth
Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.
PAIRING: The two
devices get to know each
other.
“Hi. I’m a
phone.”
“Hi phone.
I’m a speaker.”
CONNECTING: The two
devices do something
together (like play music).
This guide takes you through the steps to get started.
Step 1: Unpack
Make sure the following items came in this package:
• the LXS speaker
• an AC adapter
Step 2: Charge the LXS
Before you start using the LXS speaker for the first time,
it’s a good idea to charge it completely.
To charge the speaker: Plug
Speaker back
the included AC adapter into
the DC IN jack on the speaker’s
back panel.
Plug the other end of the AC
adapter into an AC outlet or
surge protector.
The charging indicator next to
the DC IN jack is red while the
speaker is charging. It turns green when the speaker is fully
charged.
Note: You can use the speaker while it’s charging.
Step 3: Turn on
Press and hold the button on
the top of the speaker.
Speaker top
The power-up tone sounds and
the button starts blinking.
After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.
Step 4: Pair + Connect
8:45PM
Enable Bluetooth on your
smartphone or other device.
Wi-Fi
Wi-Fi Settings
Bluetooth
Make sure the button on the
top of the speaker is blinking
rapidly. (If it isn’t, give a short
double-press on the button.
The speaker gives an audio
signal.)
Bluetooth Settings
VPN Settings
If you’ve previously paired your phone or other Bluetooth device with this
speaker, the speaker will automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair to a new device, give a
short double-press to the button. The speaker gives a signal and the button
starts blinking.
Choose 808 LXS from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
The speaker gives an audio signal when it’s finished pairing
and connecting to your smartphone. The button on the top
of the speaker turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s AUX IN jack when
you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
• If you’ve paired your device with the speaker before but you’re having trouble
reconnecting when you turn the speaker back on, give a short press to the
button while it’s flashing. The speaker will attempt to connect to a previously
paired device.
Step 5: Play music
Set your device’s volume for music
to 50%.
8:45PM
Now playing
Media volume
Note: This is to make sure the sound from the
speaker isn’t too loud when you start streaming.
Start playing music or other audio
on your device. Within seconds, the
speaker starts streaming the audio
wirelessly via Bluetooth.
8:45PM
To adjust the volume of your audio:
Press the VOLUME + and –buttons on the top of the
speaker (or use the volume controls on your phone).
Using Bass Boost
The LXS speaker has a Bass Boost feature that enhances
the lower frequencies in your music. Bass Boost is turned
on by default. Press the EQ button on the top of the
speaker to toggle Bass Boost on and off.
Using the Aux In input
Use a 3.5mm audio cable (not
included) to connect the audio
output from your device to
the AUX IN audio input on the
speaker’s back panel.
Speaker back
The speaker automatically
switches to the AUX IN audio,
and the button on the top of
the speaker turns solid blue.
To listen to Bluetooth audio again, unplug the cable from
the speaker’s AUX IN jack. The speaker will try to reconnect
to the last Bluetooth device.
Note: The EQ and VOLUME buttons stay lit while the AUX IN jack is in use—
these buttons work with an AUX IN source. The TRACK and PLAY/PAUSE
buttons do not work while the AUX IN jack is in use, so they are not lit.
Using the Speakerphone
This speaker has a built-in
microphone, so you can use
it for phone calls as well as
music. Your phone will ring
through the speaker when
you’re receiving a call.
Speaker top
Microphone
To answer/end the call: Press the button on top of the
speaker. The button lights when you’re on the call.
Note: Make sure you’re close enough to the speaker’s built-in microphone so
that the other person can hear you!
IMPORTANT: Not all phones support playback control and phone answer/end
control. Check your phone’s user manual for more information if you’re having
trouble with these functions.
Using the Power Bank
This speaker has a built-in power
Speaker back
bank, so you can use it to charge
and power your phone or other
portable device, even while you use
the speaker.
To charge your device: Plug your device’s charging cable
into the 5V USB jack on the back of the LXS speaker.
Tour of the speaker
Top
VOLUME – / + decrease or increase the volume of the
speaker’s audio.
EQ switches between bass boost and regular equalization.
POWER/PAIR button turns the speaker on/off (press and
hold) and puts the speaker into pairing mode (short double
press). It also shows the Bluetooth status of the speaker:
• fast blinking blue while pairing or reconnecting
• solid blue when paired or when the AUX IN jack is in use
• off when the speaker’s off.
CALL button answers or ends calls on a Bluetoothconnected phone.
TRACK BACK, PLAY/PAUSE, and TRACK FWD buttons
control playback of a paired Bluetooth music source (not all
Bluetooth devices support this functionality; these buttons
do not control playback for an AUX IN source).
Back
5V charges your mobile device when
the LXS battery has enough power.
Plug your device’s charging cable into
this jack to charge your device.
Charge
indicator
DC IN jack connects to the provided AC adapter to plug the
speaker into a wall outlet or surge protector.
Charge indicator shows the charging status of the speaker:
• solid red while charging
• green when fully charged
AUX IN jack lets you connect an audio device directly to the
speaker using a 3.5mm audio cable (not included).
If you have any questions about this product,
visit 808Audio.com or call our toll-free help line
at 1-800-732-6866.
10


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2016:03:13 14:58:12+08:00
Create Date                     : 2016:03:13 14:58:12+08:00
Metadata Date                   : 2016:03:13 14:58:12+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:5184059c-96f6-4107-a567-d3c45b9843ca
Instance ID                     : uuid:b9a1a93c-686f-40de-8b47-2b8c4a01b32c
Producer                        : Adobe PDF Library 15.0
Page Count                      : 12
Creator                         : Adobe InDesign CC 2015 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VIXSP270

Navigation menu