Voxx Accessories SP891B Wireless Speaker User Manual SP891 insert indd

Download:
Mirror Download [FCC.gov]
Document ID	2450902
Application ID	YIu2LqY9M/2Lw3B0rvrxkw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	416.01kB (5200179 bits)
Date Submitted	2014-11-21 00:00:00
Date Available	2014-11-21 00:00:00
Creation Date	2014-11-13 11:50:03
Producing Software	Acrobat Distiller 8.3.1 (Macintosh)
Document Lastmod	2014-11-13 11:50:03
Document Title	SP891 insert.indd
Document Creator	Adobe InDesign CS5 (7.0.4)
Document Author:	hkaudiovox

QUICK
START
GUIDE
Getting to know Bluetooth
Bluetooth wireless is a quick and easy way
to connect a smartphone to a speaker or a
headset. There are basically two steps to
making Bluetooth work.
PAIRING:
The two devices get to know each other.
“Hi. I’m a phone.”
“Hi phone.
I’m a speaker.”
CONNECTING:
The two devices do something together (like
play music).
This guide takes you through the steps to get
started.
Step 1: Unpack
Make sure the following items came in this
package.
Your speaker
Audio
cable
USB
cable
Step 2: Charge the SL
Before you start using the HEX SL speaker
for the first time, it’s a good idea to charge it
completely.
To charge the speaker:
Plug the included USB
cable into the Charge
jack on the back of the
speaker.
Plug the other end of
the USB charging cable
into a power source, like
a computer or a USB
charging adapter.
The charging indicator on
the front of the speaker
is red while the speaker
is charging. It turns green
when the speaker is fully
charged.
Note: You can use the speaker
while it’s charging.
Speaker
back
Speaker
front
Step 3: Turn on
Flip the OFF / ON
switch on the bottom
of the speaker to
the ON position. The
power up tone sounds
and the indicator
light on the front of
the speaker starts
blinking.
After a few seconds,
the speaker goes to
Bluetooth pairing
mode to set up with
your smartphone.
Speaker bottom
Speaker
front
Step 4: Pair + Connect
Enable Bluetooth on
your smartphone or
other device.
8:45PM
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
Make sure the
indicator light on the
front of the speaker is
blinking rapidly. (If it
isn’t, press and hold
the Pair button on the
side of the speaker
until the speaker gives
an audio signal.)
Speaker
front
If you’ve previously paired your phone or other Bluetooth
device with this speaker, the speaker will automatically
attempt to reconnect to that device when you switch the
speaker on. If you want to pair to a new device, press and
hold the Pair button on the side of the speaker until the
speaker gives an audio signal.
Choose 808 Hex SL from
the pairing options on
your smartphone. (If it’s
not in the list, choose
“Scan” from your phone’s
Bluetooth menu.)
8:45PM
Bluetooth devices
Headset
Computer
808 Hex SL
The speaker gives an audio signal when
it’s finished pairing and connecting to your
smartphone. The indicator light on the front of
the speaker turns solid blue.
Note: The process of enabling Bluetooth and connecting
varies from device to device. See your device’s owners manual
for more information and specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s AUX
IN jack when you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of
roughly 33 feet (10 meters). This range may vary, however,
based on other factors, such as room layout, wall material,
obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
Step 4: Play music
Set your device’s volume
for music to 75%.
8:45PM
Now playing
Media volume
Note: This is to make sure the
sound from the speaker isn’t too
loud when you start streaming.
Start playing music or
other audio on your
device. Within seconds,
the speaker starts
streaming the audio
wirelessly via Bluetooth.
To adjust the volume
of your audio: Use
the — and + buttons on
front of the speaker. You
can also use the volume
controls on your phone.
8:45PM
Speaker
front
Note: If you notice sound distorting even at low volumes,
turn the volume down on your phone.
Using the Aux In input
Use the audio cable
included with this
speaker to connect
the audio output from
your device to the Aux
In audio input on the
speaker’s back panel.
Speaker
back
The speaker automatically switches to the
Aux In audio, and the pairing indicator on the
front of the speaker turns white.
To listen to Bluetooth audio again, unplug
the cable from the speaker’s Aux In jack.
The speaker will try to reconnect to the last
Bluetooth device.
Tour of the speaker
Front of the speaker
Pairing indicator shows
the Bluetooth status of Pairing
indicator
the speaker:
Charging
indicator
• fast blinking blue while pairing
• slow blinking blue while reconnecting
• solid blue when paired
• solid white when the Aux In jack is in use
• off when the speaker’s off.
Charging indicator shows the charging status
of the speaker:
• solid red while charging
• solid green when charged
— and + adjust the volume of the speaker.
Side of the speaker
Pair button puts the
speaker into pairing
mode to connect to a new Bluetooth device,
like a smartphone.
Back of the speaker
Aux In jack lets you connect an audio device
directly to the speaker using the provided
audio cable.
Charge jack connects to the provided USB
charging cable to plug the speaker into a
power source or adapter.
Bottom of the speaker
OFF ON switch turns the speaker on and off.
For more information about your new
HEX SL speaker, see the User Guide.
If you have any questions about this
product, visit 808Audio.com or call our tollfree help line at 1-800-732-6866.
SP891 QSG 00


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2014:11:13 11:50:03+08:00
Create Date                     : 2014:11:13 11:50:03+08:00
Metadata Date                   : 2014:11:13 11:50:03+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Format                          : application/pdf
Title                           : SP891 insert.indd
Creator                         : hkaudiovox
Document ID                     : uuid:55d890a8-946e-433c-909b-71c418b26153
Instance ID                     : uuid:a7fd499a-ef73-49d6-ba0b-daab1834afd8
Producer                        : Acrobat Distiller 8.3.1 (Macintosh)
Has XFA                         : No
Page Count                      : 14
Author                          : hkaudiovox

EXIF Metadata provided by EXIF.tools