Voxx Electronics DEI26171 ASK Transmitter User Manual NDIYTX 05 06

Download:
Mirror Download [FCC.gov]
Document ID	664730
Application ID	s4/P7OnJbcICh6972U11eQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.08kB (25982 bits)
Date Submitted	2006-06-05 00:00:00
Date Available	2006-06-02 00:00:00
Creation Date	2006-05-31 12:23:09
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-05-31 12:23:09
Document Title	NDIYTX_05-06.qxd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Mark.Chasey

Design Tech Replacement
Transmitter Programming
Guide
24161, 24171, 26161, 26171, 28161, 28171
Product Description
Each DesignTech system can learn up to 4 transmitters.
This programming guide describes how to Auto-program transmitter button operations to your system, and how to delete any lost
or stolen transmitters.
Transmitter button operations can also be custom programmed to the user's preference or for multiple vehicle control.
Please refer to the Owners Manual for a full description of transmitter button operations and custom transmitter button
programming.
Programming the Transmitter
1. Turn the ignition to the ON position
2. Within 5 seconds, press and release the Momentary Switch ONE time, and then Press and hold it.
3. After 2 seconds the LED will flash on/off one time, pause and repeat to indicate Auto-programming is ready.
4. Within 15 seconds, press the "*" button of the transmitter to be programmed, the Horn/Siren output will pulse once to confirm
programming.
5. Repeat Step 4 for each transmitter.
6. Exit programming: Wait 15 seconds or turn the ignition OFF to exit transmitter programming. The Horn/Siren output will pulse
5 times to confirm exit.
Deleting lost or stolen transmitters
This operation will delete ALL transmitters from the system memory and can only be performed using a programmed transmitter. If
no programmed transmitters are available, one must first be programmed using the above steps
1. Turn the ignition to the ON position
2. Within 5 seconds, begin to press and release the Momentary Switch NINE times, and then Press and hold it.
3. After 2 seconds the LED will flash on/off NINE times, pause and repeat to indicate Delete All Transmitters is ready.
4. Within 15 seconds, press the ANY button of a programmed transmitter, the Horn/Siren output will pulse once to confirm
deletion of all transmitters.
5. Wait 15 seconds or turn the ignition OFF to exit transmitter programming. The Horn/Siren output will pulse 5 times to confirm
exit.
FCC/ID Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesirable operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
this device.
Š 2006 Directed Electronics
NDIYTX 05-06

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:05:31 12:23:09-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:05:31 12:23:09-07:00
Format                          : application/pdf
Title                           : NDIYTX_05-06.qxd
Creator                         : Mark.Chasey
Document ID                     : uuid:f0c818c1-b785-4f3e-96ef-152e9068b902
Instance ID                     : uuid:04d9b6a1-81c1-44c0-8a17-bdd402da68ee
Page Count                      : 1
Author                          : Mark.Chasey

EXIF Metadata provided by EXIF.tools