Voxx Electronics DEI474P 4-Button HF, Stealth Code Remote User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	274844
Application ID	5FhlxuP7sSF1OWFRzbdwWg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.74kB (84279 bits)
Date Submitted	2002-10-04 00:00:00
Date Available	2002-10-04 00:00:00
Creation Date	2002-09-24 15:34:25
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-09-26 09:58:03
Document Title	manual

473_474 Blister Packs.qxd
9/24/2002
3:33 PM
Page 2
REPLACEMENT TRANSMITTER
Model 474P, 4 Button HF, Stealth Code Remote
The following Learn Routine can be used to program
this replacement transmitter to the system. In order to
1.
2.
3.
REPLACEMENT TRANSMITTER
Key. Turn the key to the ON position
Door. Open a door (660XP only).
Choose. Within 5 seconds press and release the
Valet/Program button the number of times corresponding to the desired channel listed below.
Once you have selected the channel, press the
Valet/Program button once more and hold it. The
LED will flash the same number of times as the
channel selected and the siren (660XP only) will
enter the Learn Routine, the system’s Valet/Program
switch must be plugged into the BLUE port.
4.
5.
chirp to confirm the selected channel. Do NOT
release the button.
Transmit. While holding the Valet/program
button, press the button from the transmitter you
wish to assign to that channel. The unit will chirp
(660XP only) to confirm that the transmitter has
been taught to the receiver
Release. Once the code is learned you can release
the Valet/Program button and remove the key.
Model 474P, 4–Button HF, Stealth Code Remote
Channel Number
SYSTEM
Date Code
440HP
OK2F
660XP
OK2F
Function
Auto-learn Standard Configuration
Auto-learn Single-Button Configuration
Delete All Transmitters
Single-Button Configuration
Standard Configuration
A remote that has been programmed to a single-button configuration will control both arm/lock and disarm/unlock from the same button. Using the one-button configuration, the transmitter buttons are assigned
to the following functions:
A remote that has been programmed to an standard
configuration will use separate buttons for arm and
disarm similar to a factory keyless entry. Using the
expanded configuration, the transmitter buttons are
assigned to the following functions:
Lock Icon Button
Lock Icon Button
The lock icon button arms/locks and disarms/unlocks
the system. When held for three seconds, Panic
mode is activated
The lock icon button arms and locks the system.
Unlock Icon Button
The unlock icon button operates Channel 2 and silent
arms/locks and disarms/unlocks.
Unlock Icon Button
The unlock icon button disarms and unlocks the system.
AUX Icon Buttons
The AUX icon button operates channel 2.
Unlock and Lock Icon Buttons
Siren Icon Button
When pressed together, the lock and unlock icon
buttons operate channel 3.
The siren icon button operates Panic only.
Unlock and Lock Icon Buttons
When pressed together, the lock and unlock icon
buttons operate channel 3.
FCC/ID Notice
P/N 474P
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this device.
MADE IN TAIWAN
© 2002 Directed Electronics, Inc. Vista CA 92083
All rights reserved. 9/02
473_474 Blister Packs.qxd
9/24/2002
3:33 PM
Page 4
REPLACEMENT TRANSMITTER
Model 473P, 3 Button HF, Stealth Code Remote
REPLACEMENT TRANSMITTER
The following Learn Routine can be used to program
this replacement transmitter to the system. In order to
enter the Learn Routine, the system’s Valet/Program
switch must be plugged into the BLUE port.
1.
2.
3.
4.
Key. Turn the key to the ON position
Door. Open a door.
Choose. Within 5 seconds press and release the
Valet/Program button the number of times corresponding to the desired channel listed below.
Once you have selected the channel, press the
Valet/Program button once more and hold it. The
LED will flash the same number of times as the
channel selected and the siren will chirp to confirm
Model 473, 3–Button HF, Stealth Code Remote
Channel Number
SYSTEM
Date Code
460HP
OK2F
5.
the selected channel. Do NOT release the button.
Transmit. While holding the Valet/program
button, press the button from the transmitter you
wish to assign to that channel. The unit will chirp
to confirm that the transmitter has been taught to
the receiver
Release. Once the code is learned you can release
the Valet/Program button and remove the key.
Function
Auto-learn Single-Button Configuration
Delete All Transmitters
Single-Button Configuration
A remote that has been programmed to a single-button configuration will control both arm/lock and disarm/unlock from the same button. Using the one-button configuration, the transmitter buttons are assigned
to the following functions:
Lock/Unlock Icon Button
The lock/unlock icon button arms/locks and disarms/unlocks the system.
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this device.
AUX Icon Button
The AUX icon button operates Channel 2 and silent
arm/lock and disarm/unlock.
Siren Icon Button
The siren icon button operates Panic only.
Lock/Unlock and AUX Icon Buttons
When pressed simutaneously, the lock/unlock and
AUX icon buttons activate Channel 3.
P/N 473P
MADE IN TAIWAN
© 2002 Directed Electronics, Inc. Vista CA 92083
All rights reserved. 9/02

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:09:24 15:34:25
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:09:26 09:58:03-07:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools