Voxx Electronics DEI6711 Security/Remote Control Transceiver User Manual pages 19 to 30

Download:
Mirror Download [FCC.gov]
Document ID	986932
Application ID	QEnqalClAxWEwQjgg9YmoA==
Document Description	user manual pages 19 to 30
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	199.03kB (2487886 bits)
Date Submitted	2008-08-19 00:00:00
Date Available	2008-08-19 00:00:00
Creation Date	2008-08-19 09:46:26
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2008-08-19 09:46:39
Document Title	user manual pages 19 to 30
Document Creator	Adobe InDesign CS3 (5.0.2)

Silent arm
AUX
Command: Press
one- time and then press
Feedback: Screen changes to the lock icon
Notes:
Arms the system without chirps
Silent disarm
AUX
AUX
Command: Press
one- time and then press
Feedback: Screen changes to unlock icon
Notes:
Disarms the system without chirps
Runtime reset
AUX
AUX
Command: Press
one-time and then
Feedback: Remote start ON tones.
Notes:
Re-starts the remote start runtime counter if remote start
is active. Note: If remote start is not active, the 2-WAY
remote will respond with error tone.
AUX
Aux 1
AUX
Command: Press
one time and then press
Feedback: The screen will show a text of the item activated
Notes:
This is an optional feature. See your sales rep/installer
for details.
AUX
Cabin temperature
AUX
Command: Press
one time, then Hold for 1.5 seconds.
Feedback: Screen will display current in cabin temperatue.
Notes:
Cabin temperature is displayed on the remote. LED lights
up to indicate a range.
Š 2008 Directed Electronics. All rights reserved.
19
Sensor Bypass
AUX
Command: Press
two- times and then
Feedback: Screen will display text of sensor bypass
Notes:
Available when armed only: bypasses warn triggers.
Send again to bypass Warn & Full Trigger; Send again
to turn bypass off and monitor sensors normally. For more
information, see Modified Arming Modes.
AUX
Valet mode
AUX
Command: Press
two-times and then
Feedback: Unlock Icon appears hollow and text states Valet when
entering Valet mode.
Unlock Icon appears solid and text states Valet when
exiting Valet mode
Notes:
To enter or exit Valet mode, even if Armed. When entering Valet Mode the unlock LED blinks, and the remote
beeps one time. When exiting Valet Mode the unlock
LED blinks and the remote beeps two-times.
AUX
Timer mode
AUX
Command: Press
two-times and then
Feedback: Small timer icon appears and text reads timer mode.
Notes:
Enables or disables the remote start timer mode.
Aux 2
AUX
Command: Press
two times and then press
Feedback: Text will display the item activated
Notes:
This is an optional feature. See your sales rep/installer
for details.
AUX
20
Š 2008 Directed Electronics. All rights reserved.
Armed status
AUX
Command: Press
two-times and then Hold for 1.5 seconds.
Feedback: Icon on remote will flash showing current status
Notes:
Replays last Arm /Disarm status message received.
Armed (silent sensor mode)
AUX
Command: Press
three- times and then
Feedback: Image of hollow siren appears and text reads Silent Sensor.
Notes:
Arms the system; sensor Full Trigger will ONLY page the
remote and will not activate the siren/lights. Wired inputs will page and activate the siren/lights.
AUX
Car finder
AUX
Command: Press
three-times and then
Feedback: Icon of vehicle flashes and text reads car finder. On
Vehicle: 1 long siren chirp and parking lights flash 10
times.
Notes:
Arm/Disarm cancels the light flashes.
AUX
Smart start
AUX
Command: Press
three-times and then press
Feedback: Text reads Smart Start On
Notes:
Enables or disables the SmartStart feature.
Aux 3
AUX
AUX
Command: Press
three times and then press
Feedback: Text will display the item activated
Notes:
This is an optional feature. See your sales rep/installer
for details.
AUX
Š 2008 Directed Electronics. All rights reserved.
21
Runtime check
AUX
Command: Press
three-times, and then Hold for 1.5 seconds.
Feedback: Text reads runtime and displays time left
Notes:
Runtime remaining is displayed on the remote. (See
page 28).
Armed (silent trigger mode)
AUX
Command: Press
four- times and then
Feedback: Text displays Silent Full
Notes:
Arms the system; sensor and hardwire Full Triggers will
ONLY page the remote and will not activate the siren/
lights. For more details see Silent Mode 2 section on
page 25.
AUX
Rear defogger
AUX
AUX
Command: Press
four times, and then
. (Only after remote
start is on.)
Feedback: Defogger icon appears on remote and text reads Defrost
On.
Notes:
Automatically turns on during remote start.
Last trigger
AUX
Command: Press
four- times and then hold for 1.5 seconds.
Feedback: Text scrolls last trigger.
Notes:
Trigger refers to the remote tones and LED pattern generated by the last alarm trigger event.
22
Š 2008 Directed Electronics. All rights reserved.
Using the system
➢ Arming the system
To arm the system, press the
button on the remote control.
The siren in the vehicle will “chirp” once and the parking lights will
flash once. If the power door locks have been connected, the doors
will lock. The system will automatically check for errors when it arms.
The 2-way remote will “chirp” once and blink the LOCK indicator to
confirm arming. If no arm confirmation is received, the remote will give
the Out-Of-Range signal.
AUX
If errors are found when arming:
If an alarm trigger zone – such as a door, the trunk, the hood, or a
sensor, was active at the time of arming, the system will “bypass”, or
ignore, this trigger zone. This allows the system to continue to protect
your vehicle using the remaining trigger zones.
You are notified of this active zone immediately after arming the system.
The siren in the vehicle will “chirp” again and the parking lights will
flash again. The Status LED indicator in the vehicle will blink in a pattern
to indicate the active zone number error which was found (See Table
of Zones on page 36). The 2-way remote control will sound a short
“error” tone.
Arming without the chirp (Silent Arm):
Press the
button at the bottom of the remote once, and then press
the
button. The system will arm without the confirmation chirp. The
parking lights will flash once. The 2-way remote will blink the LOCK
indicator to confirm arming. If no arm confirmation is received, the
2-way remote will give the Out Of Range signal.
AUX
AUX
Š 2008 Directed Electronics. All rights reserved.
23
➢ While the system is armed
Fail-Safe Starter Kill
The starter is disabled by the system’s Fail-Safe starter kill.
Alarm Responses
The security system can generate two levels of alarm: Warn Away - Soft
siren chirps and flashing parking lights.
The purpose of Warn-Away is to warn a would-be thief next to your
vehicle that the vehicle is protected, but in a manner that does not call
attention to it from more than a few feet away.
Full Alarm Trigger
Sounds the siren at maximum volume and flashes the parking lights.
The default duration of the Full Alarm is 30 seconds. This can be programmed to any duration from 30 to 60 seconds manually. Ask your
authorized dealer for details.
Pages the 2-way remote control. If in range, the two way remote will
display what triggered the alarm.
Warn-Away response is triggered by:
• Lesser or lighter vibrations or impacts (detected by the Stinger 		
Doubleguard shock sensor)
• Opening a door: the Progressive Door Trigger feature will sound
the Warn Away response, followed immediately by Full Alarm
• Any attempt to start the car: the Progressive Ignition Trigger will
first sound the Warn Away response, followed immediately by Full
Alarm.
• An optional Proximity Sensor (508D) triggered in the outer zone.
24
Š 2008 Directed Electronics. All rights reserved.
Full Alarm response is triggered by:
• Heavier impact to the vehicle (detected by the Stinger DoubleGuard shock sensor).
• Opening the trunk or hood.
• Opening a door: the Progressive Door Trigger feature will first
sound the Warn-Away response, followed immediately by Full
Alarm.
• An optional sensor, such as an optional Proximity Sensor triggered
in the inner zone.
Paging Signals
If the Full Alarm response is triggered, the 2-way remote control will be
sent a paging signal by the in-car system.
Note: Call the police immediately if you witness a crime in progress.
Paging range varies with terrain and environmental conditions.
➢ Modified Arming Modes
The Responder LC gives you an unprecedented level of control over
how it will protect your car. “Normal arming” means that all the Responder LC security features are active automatically. You can turn
some security features off on a one-time basis.
Turning off the Warn Away response
After arming, you can turn off the Warn-Away response on a one-time
basis.
1. Press the
button twice.
2. Press the
button.
The
LED flashes and the remote sounds an error tone.
AUX
AUX
AUX
Now, slight impacts or vibrations will not trigger Warn-Away. Heavy
Š 2008 Directed Electronics. All rights reserved.
25
impacts will still trigger Full Alarm.
Note: The next time you arm the system, Warn-Away will work
normally.
Turning off the Sensor Full Trigger response
You can completely disable the Stinger Doubleguard Shock Sensor
and any added optional sensors on a one-time basis. The entry points
(doors, hood, etc.) will still be monitored. All sensors will not be able to
trigger the Warn-Away response or the Full Alarm response.
1. After disabling Warn-away response, press the
the button
twice.
2. Press the
button.
AUX
AUX
Note: The next time you arm the system, the shock sensor will work
normally.
Silent Mode 2 - Turning off the siren
You can turn off the vehicle siren and flashing lights on a one-time basis,
leaving the system’s paging feature as the only alarm response.
Note: Call the police immediately if you witness a crime in progress.
Paging range varies with terrain and environmental conditions.
Full Silent Mode.
In this mode, the siren cannot be triggered, but any trigger will cause
the 2-way remote to be paged.
Press the
button four times, and then press the
within five 		
seconds.
AUX
AUX
Sensor Silent Mode
In this mode, a sensor cannot trigger the siren, but will cause the
26
Š 2008 Directed Electronics. All rights reserved.
2- way remote to be paged. All entry points (doors, hood, etc.) will still
trigger the siren.
AUX
Press the
button three times, and then press the
button.
Note: The next time you arm the system, it will function normally.
AUX
➢ Disarming the System
While the system is armed normally:
• Press the
button once.
The siren in the vehicle will “chirp” twice, and the parking lights will
flash. The 2-way remote will “chirp” twice and the
LED indicator
will blink.
AUX
AUX
If you hear four chirps on disarming, the system was triggered in your
absence. Immediately look at the Status LED in the vehicle and count
the number of flashes between pauses. This number is important, it tells
what triggered your alarm. See Disarming section under Diagnostics on
page 34 for more details.
If you hear five chirps on disarming, the system was repeatedly triggered in your absence. Immediately look at the Status LED in the vehicle
and count the number of flashes between pauses. This number is important, it tells what triggered your alarm.
The door locks (if connected) will unlock, and the parking lights will
flash.
While the alarm is triggering:
Press the
button on the remote. The siren will stop sounding and
disarm the alarm system.
AUX
Š 2008 Directed Electronics. All rights reserved.
27
High-Security Disarming
If you want the Full Alarm response to stop without unlocking the doors,
press the
button. The system will re-arm and the current alarm response will reset.
AUX
REVISIONS
DESCRIPTION
REV.
DRN.
DATE
➢ System override
To disarm the system without a remote control:
You will need to use your Override Switch located on your systems
control center (see diagram below) to disarm the system. The Override
Switch disarms the system only if you have the vehicle key.
36.32
10.44
11.50
To check proper operation:
CASE P/N:IADGH0A1
KEY P/N:IKDEL0A0
• Open the door. The alarm will sound.
NUTEK
Immediately insert the key into the ignition and turn it to the RUN or ON
position. (all the indicators in the dash will turn on).
Press the Override Switch once.
94I0600
Note: The Override Switch feature allows you to select a specific
number of presses needed to disarm the alarm. If the Override
Switch has been programmed to a new number of presses by your
authorized dealer, that number should be indicated below.
%2'<0$7(5,$/+,+($7$%689
*Tolerance please refer specification
of tolerance limits "c"
INJECT TOLERANCE SPEC.
GRADE
Âą
Âą
Âą
UNDER 6
0.08
0.16
0.30
6~30
0.10
0.20
0.40
30~120
0.20
0.40
0.80
120~300
0.40
0.80
2.00
DIMENSION
1. Texture is same as

2. Radious will be if not specified.
3. Body color :
%/$&.
SCALE:
1:1
MATERIAL
FINISH
CODE
UNIT:
M/M
DRN BY
VICTOR
DATE
TITLE
DEI
OLED IVU
APPD BY
SHEET
CORPORATION
11/20/07
CHK BY
FELIX
YGF
SIZE
OF
A4
DEPT
DRAWING NO
94I0600
Override Switch Number ___________
28
Š 2008 Directed Electronics. All rights reserved.
REV
Valet mode
REVISIONS
DESCRIPTION
REV.
DRN.
DATE
To enter or exit valet mode with the valet/program switch:
Turn the ignition key on and then off.
10.44
36.32
At anytime during the next 10 seconds, press and release
the Valet switch. Now the Status LED lights constantly if you
have entered ValetÂŽ Mode, and go out if you have exited
Valet Mode.
To enter or exit ValetCASE
mode
with the remote control:
P/N:IADGH0A1
KEY P/N:IKDEL0A0
Press two times, and then
to put the
system into/out of Valet Mode. The
NUTEK
remote beeps once and the screen displays
“valet” indicating entry into Valet
DEI
mode. Repeating the process takes the system out of Valet Mode. The remote
beeps twice.
11.50
AUX
%2'<0$7(5,$/+,+($7$%689
Âą
0.30
0.40
0.80
2.00
1. Texture is same as

2. Radious will be if not specified.
3. Body color :
%/$&.
SCALE:
1:1
MATERIAL
FINISH
CODE
UNIT:
M/M
AUX
DRN BY
VICTOR
DATE
CORPORATION
11/20/07
CHK BY
TITLE
FELIX
OLED IVU
APPD BY
YGF
SHEET
SIZE
OF
A4
DEPT
DRAWING NO
94I0600
REV
94I0600
Note: The LED on the control center turns on solid when in Valet Mode and shuts
off when exiting Valet Mode.
When locking the system in Valet Mode, the screen displays “valet” and the
remote then emits an error tone. When unlocking in Valet Mode, the screen
displays “valet” and the remote does not emit any tones.
Š 2008 Directed Electronics. All rights reserved.
29
Using the remote start
➢ Before using your Remote Start
Read this user guide, including the Warnings section at the beginning.
Ensure that the vehicle is parked in the open air and not in a garage.
To use your remote start to pre-warm or pre-cool your vehicle, remember
to set the climate controls to the desired settings before shutting off the
engine.
➢ Remote starting your vehicle
•
•
Press the
button on the remote control. The vehicle parking
lights flash.
On the 2-way remote, the Remote Start indicator appears and
ascending Remote Start tone plays.
AUX
The preset remote start run time is 12 minutes. This can be changed to
between 12 and 60 minutes (see your authorized dealer for programming changes).
Your system has a feature (if programmed on) that will automatically
notify you when the run time is running low. When 9 minutes (of the 12
minute default) runtime has elapsed, the system sends the 2-way remote
control a paging signal.
Before using the remote start be sure the vehicle is parked in a safe area with
proper ventilation.
To remote start the vehicle:
•
Press the
button on the remote control. The vehicle parking light flashes
•
On the 2-way remote, the Remote Start icon appears and ascending ReAUX
30
Š 2008 Directed Electronics. All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6291271c-3e53-4564-b4f6-7b1488390545
Modify Date                     : 2008:08:19 09:46:39-04:00
Create Date                     : 2008:08:19 09:46:26-04:00
Metadata Date                   : 2008:08:19 09:46:39-04:00
Document ID                     : uuid:02cd1dc4-1f23-40ca-8b2f-2e4adb9bf36d
Format                          : application/pdf
Tagged PDF                      : Yes
Creator                         : Adobe InDesign CS3 (5.0.2)
Producer                        : Adobe PDF Library 8.0

EXIF Metadata provided by EXIF.tools