Voxx Electronics DEI6867T Vehicle Transceiver Unit User Manual 6867T installation guide 20170710
DEI Headquarters, Inc. Vehicle Transceiver Unit 6867T installation guide 20170710
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3774782 |
| Application ID | FSUrpx8y3cRJO0R1yRpU2A== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 89.76kB (1121953 bits) |
| Date Submitted | 2018-03-09 00:00:00 |
| Date Available | 2018-03-09 00:00:00 |
| Creation Date | 2017-07-10 10:31:35 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2018-03-07 10:50:14 |
| Document Title | 6867T installation guide_20170710 |
| Document Creator | Adobe Illustrator CC 2014 (Windows) |
6867T Replacement Digital Control Center Product Description Remote Pairing The 6867T control center is compatible with the following modules: DS4 and DS4+. Prepare the vehicle system to be Paired with a new remote 1. Open at least one vehicle door. 2. Turn the key to the ON position. 3. Within 5 seconds press and release the Control button on the Control Center one time. 4. Within 5 seconds, press and hold the Control button on the Control Center. The status LED begins flashing in single flash sequence and the siren/horn sounds once to confirm the system is ready for remote pairing. Release the button. 5. Locate your remote control model below and follow the instructions. System Pairing will exit if: • The ignition is turned off • The open door is closed • 60 seconds lapses with no actions Mounting the Control Center Note Once this replacement control center has been installed, all remote controls must be paired with your system. See Remote Pairing for details and follow the instructions for your remote control type. Note: Make sure the remote to be paired with the system is set for the desired Car 1 or Car 2 operation. LCD Remote Control: 1. Press and hold the button for 8 seconds, the remote beeps once, button. Main Menu is displayed. Release the 2. Press the AUX or buttons until Pair is displayed. 3. Press and hold the button until the remote beeps 3 times thenrelease the button. The remote is now ready to pair with the system. 4. Press the button. 5. Wait several seconds for feedback as the remote generates a security encryption and sends it to the Control Center. If pairing is successful the siren/horn sounds and the remote emits several tones. The screen displays if the Pairing is successful or failed with corresponding text. If pairing fails repeat step 4. AUX The control center’s position should be discussed with the vehicle owner prior to installation since the antenna, with built-in status LED and Valet/ Program, must be visible/accessible to the customer. AUX AUX AUX AUX The best position to locate the control center is centered high on the front windshield. It can be mounted vertically or horizontally relative to the windshield. Metallic window tint can also affect range negatively, so this should be a consideration when determining the mounting location. AUX After you determine the best mounting location, follow these steps: Clean the mounting area with a quality glass cleaner or alcohol to remove any dirt or residue. To exit pairing mode on the remote: • Press and release the button. • Wait 30 seconds without pressing a command button on the remote. Plug the cable into the control center. Mount the control center with double-sided tape. Responder LED or Companion Remote Control: 1. Press and hold the button for 8 seconds. The transmit LED will come button. on solid. Release the 2. Press and hold the until the transmit LED flashes 3 times then comes on solid. 3. Press the button. 4. Wait several seconds for feedback as the remote generates a security encryption and sends it to the Control Center. If pairing is successful the siren/horn sounds and the 2-way remote emits several tones (the companion remote does not generate tones). If pairing is not successful press and release the button once and then repeat steps 2 and 3. AUX Route the cable down the window pillar to the control module and plug the cable in the control module. AUX AUX AUX CONTROL CENTER CABLE AUX AUX To exit pairing mode on the remote: • Press and release the button once, thenpress and hold until the transmit LED shuts off. • Wait 30 seconds without pressing a command button on the remote control. AUX CONTROL MODULE © 2017 Directed, All rights reserved. N6867T--2017-11-30 GOVERNMENT REGULATIONS This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. WARNING! : Changes or modifications not expressly approved by Directed Inc. could void user's authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS-247 standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standards RSS-247. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.” Health Canada RF Exposure Warning: This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Heath Canada’s requirement. The device must maintain a separation distance of 20cm or more from the person’s body, except for the hands and wrists. Information can be obtained at: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php Lignes Directrices de Santé Canada sur l’exposition aux radiofréquences: Cet appareil est conforme avec Santé Canada Code de sécurité 6. Le programme d’installation de cet appareil doit s’assurer que les rayonnements RF n’est pas émis au-delà des limites établies par Santé Canada. L’emplacement de l'appareil doit se situer à une distance de 20cm ou plus par rapport au corps de la personne, à l’exception des mains et des poignets. Les informations peuvent être obtenues à l’adresse Internet suivante: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-fra.php © 2017 Directed, All rights reserved. 920-10012-01 N6867T--2017-11-30 LIMITED ONE YEAR CONSUMER WARRANTY For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) prom -ises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE. This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s website at: www.directed.com © 2017 Directed, All rights reserved. 920-10012-01 N6867T--2017-11-30
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:07:10 10:31:35-04:00 Creator : Adobe Illustrator CC 2014 (Windows) Modify Date : 2018:03:07 10:50:14-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:03:07 10:50:14-05:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 204 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 18081 bytes, use -b option to extract) Instance ID : uuid:cb5ab335-3fb6-424c-8be4-6b980861bd23 Original Document ID : adobe:docid:indd:28d5e7a3-c3ca-11de-8930-b02fd2093fb0 Document ID : xmp.did:cd6902d0-2a71-584c-bdd9-1465713fc8c0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:188e112a-1b27-744c-b4a2-4642b5ee4094 Derived From Document ID : xmp.did:188e112a-1b27-744c-b4a2-4642b5ee4094 Derived From Original Document ID: adobe:docid:indd:28d5e7a3-c3ca-11de-8930-b02fd2093fb0 Derived From Rendition Class : proof:pdf History Action : converted, saved, saved History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows), Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, /, / History When : 2017:04:10 12:18:58-04:00, 2017:07:10 10:30:49-04:00, 2017:07:10 10:31:32-04:00 History Instance ID : xmp.iid:188e112a-1b27-744c-b4a2-4642b5ee4094, xmp.iid:cd6902d0-2a71-584c-bdd9-1465713fc8c0 Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\sherwin.sablay.DEI\Desktop\6867T.png Manifest Reference Document ID : adobe:docid:photoshop:3226a14d-657c-11e7-8157-9da62a23c52f Manifest Reference Instance ID : xmp.iid:83ccd9f3-a9e8-7d4a-b02d-4cce23e434b8 Ingredients File Path : C:\Users\sherwin.sablay.DEI\Desktop\6867T.png Ingredients Document ID : adobe:docid:photoshop:3226a14d-657c-11e7-8157-9da62a23c52f Ingredients Instance ID : xmp.iid:83ccd9f3-a9e8-7d4a-b02d-4cce23e434b8 Format : application/pdf Title : 6867T installation guide_20170710 Producer : Adobe PDF library 11.00 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 654.000000 Max Page Size H : 834.000000 Max Page Size Unit : Points Font Name : Arial-BoldMT, ArialMT, MyriadPro-Regular, TimesNewRomanPSMT, Myriad-Bold, Myriad-Roman, Futura-Light, Futura-Bold, Futura, Futura-Condensed Font Family : Arial, Arial, Myriad Pro, Times New Roman, Myriad Bold, Myriad Roman, Futura Light, Futura Bold, Futura, Futura Condensed Font Face : Bold, Regular, Regular, Regular, Bold, Roman, Light, Bold, Condensed Font Type : Open Type, Open Type, Open Type, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : Version 6.90, Version 6.90, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 6.96, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : arialbd.ttf, arial.ttf, MyriadPro-Regular.otf, times.ttf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Page Count : 3 For : Sherwin Sablay, Bounding Box : 0 0 654 834 Container Version : 11 Creator Version : 18 Image Height : 834 Image Width : 654 Image Size : 654x834 Megapixels : 0.545EXIF Metadata provided by EXIF.tools