Voxx Electronics DEI7642 Vehicle Remote Control Transmitter User Manual 1
DEI Headquarters, Inc. Vehicle Remote Control Transmitter 1
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 1
Compatible with the
following systems:
Python 950
Python 990
Replacement
Transmitter
Compatible with
P/N 7642P
Python Responder SST Companion
Transmitter
REPLACEMENT TRANSMITTER
Model 7642P, 4 Button Companion Remote for Responder SST
MADE IN CHINA
©2007 Directed Electronics, Vista CA 92081
All rights reserved.
P/N 7642P 2007-07
The following Learn Routine can be used to program this replacement transmitter to the system. In order to enter the
Learn Routine, the system’s Valet/Program switch must be plugged into the BLUE port.
1. Door. Open a door.
2. Key. Turn the key to the ON position.
3. Choose. Within 5 seconds press and release
the Valet/Program button once. Press the Valet/
Program button once more and hold it. The LED will
flash one time and the siren (if connected) will chirp
to confirm the selected channel. Do NOT release
the button.
4. Transmit. While holding the Valet/program button,
press the arm button from the transmitter you wish
to assign to that channel. The unit will chirp (if horn
or siren connected) to confirm that the transmitter
has been taught to the receiver
5. Release. Once the code is learned you can release
the Valet/Program button and remove the key.
Standard Configuration
A remote that has been programmed to a standard
configuration that will use separate buttons for arm
and disarm similar to a factory keyless entry. Using
this configuration, the transmitter buttons are assigned
to the following functions:
Lock Icon Button
The lock icon button arms and locks the system.
Unlock Icon Button
The unlock icon button disarms and unlocks the system.
AUX Icon Buttons
The AUX icon button operates channel 2.
Star Icon Button
The star icon button operates Remote Start.
FCC/ID Notice
This device complies with Part 15 of FCC rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate this device.