Voxx Electronics DEI7756 Two way transceiver SST car remote starter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2373525
Application ID	AiRBGKgkp4ZtB9L/Maspnw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.3kB (441305 bits)
Date Submitted	2014-08-29 00:00:00
Date Available	2013-08-29 00:00:00
Creation Date	2013-07-16 09:14:37
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-07-30 13:58:27
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Paul Boyer

Viper 7756V 2-Way [CD Remote User Guide
Thank you lor purchasing this viper Remote Transciever This guide provides a general description ol operations lor viper Remote Start and Security Systems This
2way LCD Remote Wlll conlirrn commands through Visual leedback on the LCD screen
Level Direct Access [x y Ix 2 Ix 3 Ix 4
W0" LEVEL i LEVEL 2 LEVEL 3 LEVEL 4
, B Arm/Lock silent Arm Sensor sensor silent rull silent
(Panic) Bypass Arm Arm
8 Dlsorm/Unlock SilentDlsarm Remotewlei CarFtnder
f a Remote Start Runtime Timer Stat Smart Stat Defogger
Reset
Aux Aux/Trunk AUX l AUX 2 AUX 3 AUX A
t AdvanceLevel, Temperature Ann Status Runiime
change Car Check Remaining
l (3 sec}, Enter
programming
(8 sec]
Remote Poiring
Prepare the vehicle system to be Paired with a new remote Pair the remote with the system:
I I. Open at least one vehicle door 1, Press and hold the f button for 5 seconds, the remote beeps once,
l2 Turn the key to the ON position Main Menu is displayed Release the f button
l3 Within 5 seconds press and release the Control button on the 2, Press the AUX or ) buttons until Fair is displayed.
Control Center one tlrrie 3, Press and hold the f button until the remote beeps 3 titties then release the f
l4 Within 5 seconds, press and hold the Control button on the button. The remote is now ready to pair with the system,
Control Center the status LED begins tlashrng in single tlash 4, Press tie a butiari.
sequence and the siren chirps once to confirm the system is ready 5, Wait several seconds tor feedback as the remote generates a security encryp
for remote pairing Release the button tion and sends it to the Control Center. lt pairing is successful the siren chirps
l 5 Locate your remote control model below and follow the and the remote emits several tones The screen displays it the Pairing is success
instructions tut or tailed with corresponding text if pairing tails repeat step A
System Pairing will exit if: To exit pairing mode on the remote:
- The ignition is turned off - Press and release the 8 button,
- The open door is closed 0 Wait 30 seconds without pressing a command button on the remote,
. o0 seconds lapses with no actions
Government Regulations
This devrce complies with Part is ol FCC rules Operation is subleCi to the lollovvrng two conditions it i This device may not cause harmlul interference, and [2t
This devrce must accept any interference received including interference that may cause undesirable operation
This equipment has been tested and lound to comply with the limits for a class B digital devrce, pursuant to Part l5 ol the FCC Rules These limits are designed to
provide reasonable protection against harmful interleience in a residential installation This equipment generates and can radiate radio frequency energy and, if
not installed and used in accordance With the instruction manual, may cause harmlul interleience to radio communications However, there is no guarantee that
interterence will not occur in a particular installation it this equipment does cause harmlul interference to radio or television, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more ol the following measures
0 Reorient or relocate the receiying antenna
0 increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different trorri that to which the receiver is connected
. Consult he dealer or an experienced radio / w technician for help
to satisfy ECC Rf exposure compliance requirements, this devrce should be used in handheld, hand operated contiguratrans only the devrce and its antenna
must maintain a separation distance of 20 cm or more lrorrl the person’s body, except lor the hand and wrists, to satisfy RF exposure compliance This device is
designed to be used in a person’s hands and its operating conhgurations do not support normal transmissions while it is carried in pockets or holsters next to a
person‘s body
Canada Statements
rhis device carnplres With lrlduslry Canada licenceexenpt RSS standardtsl Operation is sublecl to the tallaWina two conditions [ll this device rnay not cause
interference and Hi this devrce must accept any interterence, including interference that may cause undesired operation of the devrce
Le present opporeil est conforme oux CNR d‘lndustrie Canada applicables aux appareils radio exempts de licence L‘exploitotion est autorisee aux deux conditions
suivontes [l] l‘appareil ne doit pas produire de brouillage et (2) l‘utilisoteur de l‘opporeil doit occepter tout brouillage radioelectrique subi, meme si le brouillage
est susceptible d‘en compiometre le tonctionnement
Any changes or modilications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Les changements ou modihcations non opprouyes expressement par la portie responsable de la conformite pourrait onnuler l‘autorite de l‘utilisateur a tone
taneiionner leauiperneni
© 20l3 Directed All Rights Reserved
DIREC I ED, enemies

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Paul Boyer
Create Date                     : 2013:07:16 09:14:37-07:00
Modify Date                     : 2013:07:30 13:58:27-04:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Paul Boyer
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2013:07:30 13:58:27-04:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:940bdde3-fcf0-4bc6-bd86-1633c2932243
Instance ID                     : uuid:91a9d2fd-b2e4-4747-853b-9ab08c3221ac
Page Count                      : 1

EXIF Metadata provided by EXIF.tools