Vtech 5878 Users Manual
5878 to the manual 9df22a6a-21f0-4b63-9a3f-463529a904f6
2015-02-04
: Vtech Vtech-5878-Users-Manual-392499 vtech-5878-users-manual-392499 vtech pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
STEP 4 • Press CLOCK to hear the current clock setting. • Press CLOCK again to change the settings. • Press /SKIP or /REPEAT to change the year, hour, minute or date. Quick start guide for models ia5870/5878/5882 When the correct setting is announced, press CLOCK to advance to the next setting. STEP 1 Connect power to telephone base and chargers then connect �������������������������� telephone line to telephone base • Plug the connector into the power jack at the bottom of the telephone base and chargers then plug the power adapter into an electrical outlet not controlled by a wall switch. • Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other end of the cord into the modular wall telephone outlet. Set the answering system clock NOTE: For complete feature instructions, please refer to your user’s manual. STEP 3 Make, receive, and end calls Make a call STEP 7 • Press TALK/FLASH to ensure there is a dial tone, then dial the telephone number. STEP 5 SELECT Turn the answering system on and off The answering system must be turned on to function. If the answering system is turned off, the telephone base light will be off. To turn the answering system on/off: -OR- Charge the battery • The battery may have enough charge for a short call. For best performance, charge the battery for at least 16 hours. • Press ANS ON/OFF to select on or off. • To charge the handset, place it in the telephone base or charger. • The CHARGE light on the telephone base or charger will be on when the handset is properly positioned. See Troubleshooting in the user’s manual if the CHARGE light is not on. For installation and use of the belt clip and the wall mount bracket, please consult the user’s manual. For predialing: • Dial the number (press to backspace, or press and hold REDIAL/PAUSE to insert a pause). IMPORTANT! If your product is not working properly: • Refer to the Troubleshooting section of your user’s manual. Receive a call NOTE: Use only the power adapter supplied with your VTech telephone or equivalent. • Press TALK/FLASH or any dialing keys (0-9, #, *) • Visit our website at www.vtechphones.com, or in Canada, www.vtechcanada.com. STEP 6 STEP 2 SELECT Install the battery • Align the two holes in the plug with the socket pins matching the color-coded label in the battery compartment of the handset, then snap the plug securely into place. • Place the battery in the compartment with the wires in the upper right corner. • Position the battery compartment cover and slide it towards the unit until it clicks into place. • For optimal performance, we recommend that you charge the handset for 16 hours. Note that the new battery may have enough charge for some calls. End a call • Press OFF, or put the handset in the telephone base or charger. SELECT Record outgoing announcement (optional) The telephone is pre-set with the announcement “Hello, please leave a message after the tone.” To replace the announcement with your own: • Pr e s s A N N C a n d t h e sys te m a n n o u n c e s “Announcement, press PLAY or press RECORD.” • Press RECORD to record, and the system announces “Record after the tone. Press STOP when you are done.” • After the tone, speak towards the microphone at the front right of the telephone base from about nine inches away. • Press /PLAY/STOP when finished and the answering system will automatically playback the newly recorded announcement. 96-006322-010-100 issue 0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : 3.1-702 Instance ID : uuid:35d67697-d88b-4a05-9bb5-0a7e097a9533 Document ID : adobe:docid:indd:b5e41324-8f18-11db-a770-846d928c4d58 Rendition Class : proof:pdf Derived From Instance ID : 152f73ae-8f15-11db-90a7-aed3bf7c6001 Derived From Document ID : adobe:docid:indd:40d5e6b2-8b2e-11db-8d8a-85f80d47718d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 400.00, 400.00, 400.00, 400.00, 400.00, 400.00, 400.00 Manifest Placed Y Resolution : 400.00, 400.00, 400.00, 400.00, 400.00, 400.00, 400.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Document ID : adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a, adobe:docid:photoshop:2ba1e8e6-73a0-11da-8e2d-ced5adc5425a Metadata Date : 2006:12:19 16:26:57-08:00 Modify Date : 2006:12:19 16:26:57-08:00 Create Date : 2006:12:19 18:36:24+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11111 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools