Vtech Phones Package I6720 Users Manual
PHONES PACKAGE I6720 i6720_manual_bkm
I6720 to the manual ef698e69-03f3-4d4b-8bf2-b286d0210cd1
2015-02-04
: Vtech Vtech-Phones-Package-I6720-Users-Manual-392538 vtech-phones-package-i6720-users-manual-392538 vtech pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | ![]() |
Open PDF In Browser | View PDF |
Connect power to handset charger Quick installation guide Choose the location for your handset charger, and plug charger adapter into an electrical outlet not controlled by a wall switch. i6720 Parts checklist: Check to make sure the phone’s package includes the following: 1. AC power adapter 2. Charger 3. Handset 4. Battery compartment cover 5. Belt clip 6. Battery 7. Quick installation guide Register a handset • When the handset shows NOT REGISTERED, place the handset on a base unit or charger that is connected to a power outlet. The handset screen will display PRESS FIND HNDST 4 SEC ON BASE. • Press and hold FIND HANDSET on the base unit until the IN USE light comes on. (It takes at least four seconds). • Release FIND HANDSET once the IN USE light comes on. NOT RIGISTERD PRESS FIND HNDST 4 SEC ON BASE NOTE: • If PRESS FIND HNDST 4 SEC ON BASE does not appear on the screen after a few seconds, lift up handset and place in base unit or charger again. On the i6725 base: Charge the handset battery Place the handset in the ����������� base unit��. CHARGING... will display on handset. Be sure to charge the battery for at least 16 hours before using your telephone. 1. AC power adapter 3. Handset 2. Charger NOTE: • Return the handset to the base unit when not in use to ensure optimum performance. On the i6765/75/85/86 base: Belt clip Align the pins on the inside edge of the clip with the notches on the sides of the handset. 4. Batter y compar tment cover 5. Belt clip 6. Battery 7. Q u i c k i n s t a l l at i o n guide NOTE: • To purchase replacement batteries, visit us on the web at www.vtechphones. com or call VTech Communications, Inc. at 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call VTech Telecommunications Canada Ltd. at 1 (800) 267-7377. Install handset battery 1. Align the two holes in the plug with the socketpins, matching the red and the black connectors, then snap plug into place. 2. Place the battery in the compartment with the wires in the upper right corner. 3. ������������������������������������������������������������������������� Neatly tuck the wires next to the battery inside the battery compartment. 4. ���������������������������������������������������������������� Replace cover by sliding it upwards until it clicks into place. To attach To remove Registration To register the i6720 handset to your original system, you have to first de-register all your handsets, then register the new handset and re-register all the old handsets one at a time. De-register all handsets • Press and hold FIND HANDSET on the base unit for four seconds, the IN USE light will light up. • Keep pressing FIND HANDSET for another six seconds until the IN USE light starts to flash, then release the FIND HANDSET button. • Press and release FIND HANDSET again. The IN USE light will turn off and in a few seconds, all handsets will be de-registered. After a while the handset will emit series of tones, the newly registered handset will be assigned the lowest extension number not previously assigned to another system handset when successfully registered. Repeat the steps in Register a handset if the new handset does not successfully register to the base unit within two minutes. Note: • If the de-register process does not work, you may need to reset the system and try again. To reset: pick up the handset and press TALK/ /FLASH. Then, press the OFF button and place the handset back into the base unit. • When first purchased you need to charge your handsets for five minutes before registering to base unit. On the i6725 base: Important: If this product is not working properly: 1. Visit our website at www.vtechphones.com or in Canada, www.vtechcanada.com. 2. Call our customer service at 1-800-595-9511 or 1-800-267-7377 in Canada. On the i6765/75/85/86 base: NOTE: • Use only the VTech battery and AC power adapter supplied with this unit or the recommended equivalent. • If you are not going to use the telephone for a long period of time, remove the battery to prevent possible leakage. •� Do ������������������������������������� not open or mutilate the battery. Released ������������������������������������������ electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. •��������������������������������������������������������������������������������� Exercise care in handling batteries in order not to create a short circuit with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. •� ��� Do not dispose of the battery in a fire; it might explode. ���� �������� ��� ���� �������� ����� ������ ��� ������ ��������
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:6f4d6728-bb61-41ce-87cf-cc43a906d32c Producer : Adobe PDF Library 7.0 Trapped : False Create Date : 2006:06:19 12:00:53+08:00 Modify Date : 2006:09:21 12:16:49-05:00 Metadata Date : 2006:09:21 12:16:49-05:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8834 bytes, use -b option to extract) Instance ID : uuid:6b9b2574-1ad2-4375-8f88-72818d2a0d6c Rendition Class : proof:pdf Document ID : adobe:docid:indd:5d5b8a82-ec6f-11da-b41d-9c696e630bf7 Derived From Instance ID : 5d5b8a81-ec6f-11da-b41d-9c696e630bf7 Derived From Document ID : adobe:docid:indd:7eb0c1fa-e973-11da-92d7-80e419f78e52 Format : application/pdf Tagged PDF : Yes Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools