WANKE ELECTRONIC TECHNOLOGY WK02 Wireless charger User Manual 1
SHENZHEN WANKE ELECTRONIC TECHNOLOGY CO.,LTD Wireless charger 1
Users Manual
WIRELESS CHARGER INSTRUCTIONS
NOTICE
1 Do not use the charger near water,ligued
or wet areas.
2 Do not put any dangerous articles on
this charger
3 Cut off the power before cleaning the charger
4 Do not try to disassemble,repair or
remould the product by yourself
5 Unplug this device when unused for long
periods of time
6 Do not expose your charger to temperature
above 45℃. Keep out of direct sunlight1
Product Parameters
Standard Qi wireless charging standard
Part NO. WK02
Input 5V-2A
Output 5W
Transmitter distance 4-10mm
Charging efficiency 76%
Dimension D90*8.8mm
Weight 38g
Packing List Charger/USB cable/Manual
Certification CE FCC ROHS
Operation
1 connect wireless charger with adapter,
turn on the power;or use USB cable to
connect with computer.
2 Put built-in wireless charging device on
center of charger to charger,other device
can charge on this charger since connect
with a wireless charging receiver.
Accessories List
Charger*1
USB cable*1
User manual*1
Model:WK02
Manual
WIRELESS CHARGER
12
34
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.