WEBIO GRB-288 GPS Receiver w/BT User Manual GPS Receiver
WEBIO International Co., Ltd. GPS Receiver w/BT GPS Receiver
WEBIO >
Manual rev
GPS Receiver GRB-288 User’s Guide Packing List Congratulations on your purchase of the GRB-288 GPS Receiver. We hope it will be useful to you for a long time. Before you begin, make sure that your package includes the following items. If any of these items are missing, please contact your local dealer or distributor. 1. 2. 3. 4. 5. GRB-288 Bluetooth GPS receiver Rechargeable Li-ion battery Cigarette adapter USB Cable GRB-288 User’s guide 1 piece 1 Piece 1 piece 1 Piece 1 Piece W Hardware Description 1). GRB-288 Body description External Antenna LED of Bluetooth(Blue) LED of GPS (Red) LED of Battery (Green&Yellow) Power Switch Power Jack & Data Port 2). LED status SYMBOL COLOR STATUS Blinking Bluetooth 1 time / 1 sec Standby Mode Blue Light on Charge 3) Transferring Data Yellow Light on Power too low Green Light on In charging N/A GPS DESCRIPTION Red Light off Battery full or Not in charging Blinking 2 times/1 sec Acquiring Satellites Blinking 1 time / 3 sec Position Fixed Charging PC/NB USB port Mini USB Car Cigarette Option W 4) External active antenna connector Connector type: MMCX. Active power voltage: 3.3V Getting Started STEP 1. Charge Battery Please charge battery till LED off for the first time. Battery too low Yellow LED On Power cable plug in Charging Green LED On Full or Not in charging Green LED Off STEP 2. Turn on Power Bluetooth Status Power On Blue LED blinking (1time/1sec) Connection Blue LED Light On GPS Status Put GRB-288 in clear view of the sky without any obstruction for better satellite acquiring. Search GPS Red LED blinking (2 time/1sec) Position Fixed Red LED blinking (1 time/3sec) W Software Installation The following is the steps of software installation to setup on PDA, (Bluetooth Manger is one of popular program used for Bluetooth device) Note: The device of Bluetooth baud rate is 38400bps. 1. Open Bluetooth Manager on pocket pc. New È Connect 2. Search Bluetooth device “GRB-288” Select Explore a Bluetooth device È Next 3. Find the Bluetooth device Next È Tap GRB-288 W 4. Connect to SPP Slave Select SPP slave È Next È Finish 5. Finish Bluetooth Manager Setup Tap and Hold GRB-288 :SPP slave È Connect È Finish Bluetooth setup (opposite arrow is displayed) Warranty The GRB-288 is warranted to be free from defects in material and functions for a period of one year from the date of purchase. Any failure of this product within this period under normal conditions will be replaced at no charge to the customers. Optional accessories GRB-288 has many accessories to satisfy customers’ requirement. Item Description GRB288-A1 Travel power supply GRB288-A2 2M /3.3V MMCX connector active antenna W Technical Specification General Accuracy Satellites Tracks Up to 16 Satellites Receiver L1, C/A code Update Rate 1 sec Antenna type Built-in Patch Antenna External Active Antenna MMCX-connector available Minimum signal tracked -145 dBm Battery Life Up to 24 hours LED Indicator Yes Operation Temperature -20℃ ~ +70℃ Storage Temperature -55℃ ~ +100℃ Power Consummation DCMAX 39mA ( TYP ) Reacquisition 0.1 sec Hot Start 3~6 sec Warm Start 38 sec Cold Start 45 sec Dimensions 69.2(L)x45.2(W)x22(H) mm Position 6.4 meters CEP (90%) horizontal without SA Velocity 0.1 meters/second Time 1 microsecond synchronized to GPS time Attitude 10,000 meters max Acceleration Horizontal Velocity Dynamic Vertical Velocity Conditions Bluetooth Protocol 2g, max 300 kilometers/hour max 6 kilometers/hour max V1.2 RF Tx Power Power Class 2 for 0~2dBm Receiver sensitivity Better than -82dBm with BER < 0.1% Distance Range Up to 10 meters Communication profile Bluetooth Serial Port Profile ( SPP ) Bluetooth baud rate 38400bps Protocol Message NMEA-0183 Default NMEA GGA, GSA, GSV, RMC, VTG 38400 baud rate 8 bits data, 1 start, 1 stop, no parity. Note: Changes or modifications are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Changes or modifications to the device may void FCC and CE compliance. Infrequently used radio links should be tested regularly to protect against undetected interference or fault. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 6 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cc4da8c9-eb64-4657-95bb-3c3dd29e46e7 Producer : Acrobat Distiller 6.0 (Windows) Source Modified : D:20051123003030 Headline : Create Date : 2005:11:23 08:31:40+08:00 Creator Tool : Acrobat PDFMaker 6.0 for Word Modify Date : 2005:11:23 08:33:30+08:00 Metadata Date : 2005:11:23 08:33:30+08:00 Document ID : uuid:66520afc-037e-453e-b9fa-1459c40a8c81 Version ID : 4 Format : application/pdf Title : GPS Receiver Creator : Richard Subject : Tagged PDF : Yes Author : RichardEXIF Metadata provided by EXIF.tools