WEIKING TECHNOLOGY BT06 BLUETOOTH AUDIO RECEIVER WITH 3.5MM CABLE User Manual BTR006

SHENZHEN WEIKING TECHNOLOGY CO.,LTD BLUETOOTH AUDIO RECEIVER WITH 3.5MM CABLE BTR006

User Manual

BT06Bluetooth audio receiverUser’s manualBefore use…………………………………………………………11. About BT06………………………………………………………12. System requirements……………………………………………….13. Overview of BT06…………………………………………...……1Getting started……………………………………………………21. Charging the receiver……………………………………………....22. Turning on/off the receiver………………………………………...23. Pairing with Bluetooth devices………………………………….…34. Music playback…………………………………………………….55. LED indicator……………………………………………………...5Care and maintenance……………………………………………6FAQs……………………………………………………………….6Specifications……………………………………………………...7
Welcome to use this Bluetooth stereo receiver BT06. Please read this user’smanual carefully before use.Before use1. About BT06BT06 is a stereo Bluetooth audio adapter. You can use a common audiodevice with 3.5mm audio in jack for playing back any stereoBluetooth-enabled device’s music after plugging in BT06.The product comes with a built-in rechargeable battery; it can be used forabout 12 hours after being charged fully.2. System requirementsAudio device with 3.5mm audio in jack, such as home-hifi,Car speakersetc .Bluetooth transmitting device supporting A2DP profile, such asBluetooth mobile phones, Bluetooth MP3s ,etc.3. Overview of BT061 MFB button — Power on/off, pair, music pause/play2Charging jack — DC 5V3LED indicator — Indicate current status43.5mm audio in plug — Connect to audio device1
Getting started1. Charging the receiverBT06 comes with a built-in rechargeable battery, prior to using it, it isrecommended to charge the battery fully for the first time.When the receiver is low power, red LED flashes once and the receiveremits three tones every 20 seconds. Please recharge the battery of thereceiver.Connect the charger to a standard power outlet and the charger plug to thecharging jack of the receiver. Red LED is on while charging. It takes about2.5 hours to charge the battery fully. When charging has completed, redLED will be off.Remarks:1) If the receiver can’t be turned off, you can charge it to turn it off.2) Please don’t attempt to take out the battery from the speaker, as thismight damage it.Warning:1) The battery is recyclable.2) Batteries (battery pack or batteries installed) shall not be exposed toexcessive heat place, such as sunshine, fire or the like.2. Turning on/off the receiverFunction Operation LED indicatorPower onPress and hold MFB button for3～5 secondsBlue LED is onfor 1 secondPower offPress and hold MFB button for3～5 secondsRed LED is on for1 second2
3. Pairing with Bluetooth devicesHow to enter pairing modeFunction Operation LEDindicatorIndicationtoneEnterpairingmodeEnsure the receiver is turnedoff, otherwise turn it off firstand then press and hold MFBbutton for 6～7 seconds untilLED flashes red and bluealternatelyLEDflashesred andbluealternatelyTwo “DU”tonesRemark: The pairing mode will last 2 minutes, the receiver BT006 willswitch to standby mode automatically if no devices can be connected within2 minutes.Pairing with Bluetooth mobile phoneEnsure your mobile phone supports A2DP profile. The pairing procedureswill vary depending on different models of mobile phones. Please refer toyour mobile phone user’s manual for further information. The generalpairing procedures are as follows:1) Place the receiver and Bluetooth mobile phone where they are easilyviewable by no more than 1 meter apart;2) Enter the receiver’s pairing mode (please refer to “How to enter pairingmode);3) Activate your mobile phone’s Bluetooth function and set your mobilephone to search for Bluetooth devices within range, and select “BT006”from the list of devices shown;4) According to the indication, enter password or PIN No: “0000”;5) If prompted by your mobile phone to connect, select “Yes” (This willvary among mobile phone models);6) After successful connecting, blue LED flashes twice quickly every 5secondsRemarks:If no devices can be connected within 5 minutes, the receiver will thenturn off automatically in order to save power.After successful pairing, the receiver and the mobile phone willremember each other, they will no need to re-pair next time.3
Every time the receiver is turned on, it will automatically connect to lastconnected device. If you want to pair it with other devices, please turnoff the Bluetooth function of last connected devices first and pair thereceiver with the new device according to steps 1～6 mentioned above.When the reveiver is turned on and doesn’t connect to any devices, pressMFB button twice, it will automatically connect to the last connecteddevice.When the receiver and the mobile phone are out of effective range todisconnected, they can connect to each other automatically once goingback to effective range.If the Bluetooth version of your mobile phone is V2.1 or above, it will noneed to enter PIN No. when the receiver pairs with the mobile phone.44. Music playbackConnect BT06 to an speaker and a Bluetooth music device at the same time,now you can enjoy music wirelessly.Function Status of BT06 OperationPause Playing music Short press MFB buttononcePlay Pausing Short press MFB buttononceRemarks:The music will automatically pause when you dial a phone number orthere is an incoming call.BT06 hasn’t a microphone, so you need to switch the call to the mobilephone. The music will automatically play when the call is ended.
5. LED indicatorLED indicator Status of BT06LED flashes red and bluealternatelyPairing modeBlue LED flashes once every 2secondsStandby mode and not connectedBlue LED flashes twice every5 secondsConnectedRed LED flashes once every20 secondsLow power5Care and maintenanceRead the following recommendations before using the receiver. Followingthese you will be able to enjoy the product for many years.Do not expose the receiver to liquid, moisture or humidity to avoid theproduct’s internal circuit being affected.Don’t use abrasive cleaning solvents to clean the receiver.Do not expose the receiver to extremely high or low temperature as thiswill shorten the life of electronic devices, destroy the battery or distortcertain plastic parts.Don’t dispose of the receiver in a fire as it will result in an explosion.Don’t bring the receiver into contact with sharp objects as this will causescratches and damages.Don’t let the receiver fall down onto the floor. The internal circuit mightget damaged.Don’t attempt to disassemble the receiver as it may get damaged if youare not professional.If you do not plan to use the receiver for a long time, please store it in adry place that is free from extreme temperatures and dust.In case the receiver doesn’t function properly, send it to the store you boughtit. The staff will help you to solve the problem.
FAQs1. What to do when BT06 can’t be turned on?Please charge the BT06.2. What to do when BT06 can’t pair and connect to a Bluetooth device?a) Make sure the Bluetooth device is placed within 5 meters;b) Ensure BT006 has entered pairing mode.3. What to do when BT06 can’t be turned off?Please charge the BT006 for about 2 seconds.6SpecificationsBluetooth version Bluetooth V2.1Bluetooth profiles A2DP and AVRCPBluetooth frequency range 2.402GHz-2.480GHzOperating distance 10 meters, Class IICharging input voltage/current DC 5V 300mAStandby time 230 hoursWorking time Up to 8 hoursDimensions 45×33×8mmWeight 14g
Federal Communications Commission (FCC) StatementThis device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications made to this device not expresslyapproved by Shenzhen Weiking Technology Co., Ltd. may void the FCCauthorization to operate this device.Note: The manufacturer is not responsible for any radio or tv interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user’s authority to operate the equipment.

Navigation menu