WEIKING TECHNOLOGY BT228 Bluetooth Speaker User Manual d8

SHENZHEN WEIKING TECHNOLOGY CO.,LTD Bluetooth Speaker d8

15_BT228 UserMan

尺寸: 70x100mm, 材质：100g书纸，1C+1C，风琴折页⊙ User manual x1⊙ Type-C cable (For Charging) x1⊙ 3.5mm AUX cable x1Accessories:Specifications Outdoor SpeakerUser ManualTWS1. Turn on two devices, Blue LED flash.2. Select one of the devices and double press the Power button, and then they will pair each other. (The main device:Blue and Green LED Alternately flash )3. After successfully pairing, Main device blue LED slow flash, auxiliary device blue LED long light.4. In your phone, search BT228 and connect, after successfully connecting, the two devices can play music together.5. Disconnect TWS, press + - buttons together, the Blue LED fast flash (every 2 seconds) means it has been disconnected.Sound effectMICState indicator lightPowerVolume-Volume+Play/ PauseStrapTYPE-C chargingAUX/ ResetUSBButtons:Battery indicator light BT228⊙ Bluetooth version: BT4.2⊙ speaker unit：Diameter 70 mm outside mangnet ,4ohm, 20W*2 Diameter 30 mm inner mangnet ,8ohm, 10W*2⊙ SNR: ≥75DB⊙ Working time: 6-8 hours⊙ Charging voltage/current : TYPE C DC/2000MA⊙ Support USB Flash Drive, Music format: MP3,WAV,WMA,APE,FLAG⊙ Transmission: 10M (Vary from environment and devices)⊙ Battery voltage :7.4V⊙ Battery : 2500mAh⊙ Charging time: 4-6hours⊙ THD: ≤10%⊙ Product size: 319.5*118*119.5mm OperationDisconnect BluetoothCall back AUX ModeMode SwitchShort press " " when incoming call（Under TWS, only the Main device have voice）Long press " " when incoming call（Under TWS, only the Main device have voiceShort press " " when you are on call（Under TWS, only the Main device have voice）Insert AUX to AXU ModeShort press " " Blue LED flash (every 2 seconds)Blue LED long lightIndoor:Green LED long light/Outdoor: Green LED slow Flash (every 1 second)Will connect automatically with the last connected deviceIndoor:Blue LED long light/Outdoor: Green LED slow Flash (every 1 second)Long press " " （Under TWS, only the Main device can talk）///ItemsPower OnPower OffPairingSuccessful PairingReceive the CallReject the CallHang up the Call ReconnectLong press " " for 2-3 seconds under Power off situationLong press " " for 2-3 seconds under Power on situationAuto to Enter Pairing ModeLED StatesBlue LED OnLED OffBlue LED Flash(every 2 seconds)Indoor: Blue LED long light/Outdoor: Green LED slow flashPress "+""-" togetherSelect Bluetooth Name on your PhoneInstructions/USB Mode Insert USB to USB mode Indoor:Green LED long light/Outdoor: Green LED slow Flash (every 1 second)Double press " " Blue and Green LED Alternately flashMain device blue LED slow flash, auxiliary device blue LED long light/Press + - together Blue LED fast flashShort press +Short press -Long press +Long press -Short Press " " （Mute in AXU mode）Battery Voltage lower than 6.5VBattery Voltage lower than 6.2VInsert 5V USB/////Red LED Long LightRed LED Off//Use the toothpick or other insulator insert AUX hole LED offNote: The volume and mode have memory function. When Power on, the speaker will continue the volume and mode of the last Power off. And every time the sound effect is indoor effect. TWS PairingVolume UpVolume DownNext SongPrevious SongPause/Play/MuteLow Battery AlarmLow Battery ShutdownChargingCharging FinishedResetAuto completed TWS Successful PairingDisconnect TWSSound effect switch Indoor: State indicator light long lightOutdoor: State indicator light flashShort press " " Sound effect button Left RightTWS/ Single using equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu