WGI Innovations LO8 Game Scouting Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1696119
Application ID	aTYKoyh86K5EYC9BBvVdTw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.01kB (412609 bits)
Date Submitted	2012-05-11 00:00:00
Date Available	2012-05-11 00:00:00
Creation Date	2012-05-10 14:52:03
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-05-11 20:28:30
Document Title	Microsoft Word - LO8 User Manual-20120406(For FCC Certification).doc
Document Creator	PScript5.dll Version 5.2
Document Author:	ce-fanzhenyue

Product Serial Num：
User Manual（For FCC Certification）
Product Name： LO8
File Serial Num：
edition：
Summary
The picture below is LO8 real product photo. There is a battery compartment in both sides, in which you
can put batteries after screwing up the cover at the bottom. All the batteries should be put with positive pole
in the outside. Open the SD card holder, you can see a reset key, a mini USB and a SD cart slot.
LO8 real product photo
Battery compartment filled with batteries
Compiled by JNan Lao
Apr 6th,2012
SD card slot
Reviewed by Stephen
Apr 6th, 2012
Page 1 / Total 4
User Manual（For FCC Certification）
Product Name： LO8
File Serial Num：
Product Serial Num：
edition：
UI mode
(PIC 1)
(PIC 2)
Long press the POWER button to boot up, and go to the interface in(PIC 1). Press OK to go to the
interface in(PIC 2). Press UP/DOWN/LEFT/RIGHT button to choose the third option IMAGE TYPE, press OK to
the setting mode. You can press LEFT/RIGHT button to make the option STILL(take photos) or VIDEO(take
videos) highlighted. Then press OK to save the setting and go to next setting.
You can set other options in the same way.
Introductions for setting the options
The table below shows the options which can be set by users. The options with ■ are the default settings
after reset the machine.
Settings
Options and default settings
notes
Time
■ 12:00 AM
12-hour clock
Date
■ 01/01/2012
Month/day/year
The range of calendar is from 12:00 AM
01/01/2010 to 11:59 PM 12/31/2030
Location
■________
(8 Blanks)
You can set from “A” to “Z”, “0” to “9” and a
blank” “.
After reset ,it will be 8 blanks. A blank is
showed as “_” on TFT, but nothing on the
photos.
Trigger
■ PIR Mode
□ Flextime
□ Both
Choose the trigger pattern. It can be PIR
Flextime ,or both of them.
Flextime
□ P1
□ P2
□ Interval
PIR Mode
■ Still
□ Video
PIR Active
■ 24Hr
Compiled by JNan Lao
Apr 6th,2012
Reviewed by Stephen
Apr 6th, 2012
Page 2 / Total 4
Product Serial Num：
User Manual（For FCC Certification）
Product Name： LO8
File Serial Num：
edition：
□ Day
□ Night
PIR Sense
□ Hi
■ Med
□ Lo
PIR sensitivity.
Picture
■ Regular
□ Wide
The length-width ratio of the photos to be
taken.
Regular is 4:3; Wide is 16:9.
Still Res
■ Hi
□ Med
□ Lo
The resolution ratio of the photos：
When set the Picture to be Regular:
Hi --- 8M (3264*2448)
Med --- 6M (2816*2112)
Lo --- 4M (2272*1704)
When set the Picture to be Wide:
Hi --- 8M (3840*2160)
Med --- 6M (3200*1800)
Lo --- 4M (2560*1440)
Video Res
□ HD
■ Regular
HD represent 720P@30fps ， Regular
represent
640*480@30fps(both
with
sound)
Video
■ 15s
□ 30s
□ 1m
□ 2m
The length of the video。S means second,
m means minute.
PIR Delay
■ 15s
□ 30s
□ 1min
□ 2min
□ 5min
□ 10min
The length of the video。S means second,
min means minute.
Flextime Delay
■ 1min
□ 2min
□ 5min
□ 10min
□ 15min
□ 20min
□ 25min
□ 30min
The length of the video。S means second,
min means minute.
still/video mode
If no key pressed in a continuous 30 seconds in UI mode, the TFT of LO8 will be turned off after showing
“save set”, and then go to the idle mode. Trigger the infrared sensor, the camera will take photos or videos as
Compiled by JNan Lao
Apr 6th,2012
Reviewed by Stephen
Apr 6th, 2012
Page 3 / Total 4
Product Serial Num：
you set in the UI mode.
User Manual（For FCC Certification）
Product Name： LO8
File Serial Num：
edition：
Tip: Pressing the RESET button to reset the camera, it will take photos after going to the standby mode .
You can take videos if only change the PIR Mode to Video.
Attention:
1. You should plug in the SD card before taking photos or videos.
2. The red LED will flash if you trigger the infrared sensor in the first 1.5 minutes of this mode. After 1.5
minute, the function will be off.
USB mode
In this mode ,you can read the files in the SD card.
The ways to go into this mode:
1. When the machine is turned off, connect the camera to PC with USB cable, and then long press
the POWER button to turn on the camera.
2. In UI mode, connect the camera to PC with USB cable.
FCC STATEMENT
Product Name: Game Trail Camera
Trade Name: Wildgame Innovations
Model# LO8
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment on and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Compiled by JNan Lao
Apr 6th,2012
Reviewed by Stephen
Apr 6th, 2012
Page 4 / Total 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:05:11 20:28:30+08:00
Create Date                     : 2012:05:10 14:52:03+08:00
Metadata Date                   : 2012:05:11 20:28:30+08:00
Format                          : application/pdf
Title                           : Microsoft Word - LO8 User Manual-20120406(For FCC Certification).doc
Creator                         : ce-fanzhenyue
Document ID                     : uuid:af121ad1-d4d5-486e-9315-70cda70fd942
Instance ID                     : uuid:d3df3573-a312-4566-b35d-6414e1758421
Has XFA                         : No
Page Count                      : 4
Author                          : ce-fanzhenyue

EXIF Metadata provided by EXIF.tools