WHIRLPOOL Residential Dryer Manual L0303306

User Manual: WHIRLPOOL WHIRLPOOL Residential Dryer Manual WHIRLPOOL Residential Dryer Owner's Manual, WHIRLPOOL Residential Dryer installation guides

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadWHIRLPOOL Residential Dryer Manual L0303306
Open PDF In BrowserView PDF
(24)- (WHIRLPOOL) DUET DRYER DOOR REVERSAL
#3979303_ AND #3979304.

KITS

REVERSING

THE DOOR SWING
NOTE:

Door

2
3

Reve_r_al

Place

THE
a towel

dryer or work
surface.

1

2

3

REMOVE

DOOR

TRIM

,

2.

or a soft cloth on top of the
space

to protect

the door

Loosen
the plastic
trim (1)
below the handle filler (2).

3.

Carefully
pull out on the tdm until it unsnaps and remove the handle filler and set
it aside.

above

Open

THE DOOR
the dryer

re-

and

/

Lift the door from the top keyhole
slot
screw and place it on a padded surface

5.

=

5.

door.

Loosen the top keyhole
screw, then
move the other four hinge screws.

w;÷E the inside

.

handle filler and hinge

hinge cover are provided
in the door reversing
kit that will be installed
in a later step.

2.

/

Keep the original

cover in case you decide to return the door to
its original
position.
A new handle filler and

Hinge Cover
Door Handle

LOOSEN
1.

Kit:

Loosen
the plastic
trim (1)
below the hinge cover (3).

above

and

/
./

/

2-11

assembly

Reh,o,,_e the top keyhole
place it with the others.

Continued

Carefully
pull out on the trim until it unsnaps, remove
the hinge cover, and set it
aside,

door

on the next

page.

facing

up.

slot screw and

,

Remove
handle

the

two screws

and remove

from

the door

the handle

by pulling

REVERSE THE HINGE
& HINGE BRACKET

straight out on it. Set the handle aside and
keep it in case you ever want to restore the
door swing to its odginal
position.

2 Door
Handle

1.

Place
facing

2.

Remove

the inner door, screw head side
up, on the padded work surface.
the four

door hinge

screws

Screws

/

Screws

2 Hinge
Screws

.

Remove

the six screws

that are indicated

by the arrows, shown in the illustration.
Do
not remove
any of the other screws.

,

Remove the two screws from the handle
bracket and remove
the bracket.

SGrew%

,

Lift the inner door assembly
offofthe
door assembly
and set the cuter
&ssembly
aside.

outer
door

.

,

Mount the hinge to the other side of the
door with the four screws you removed
in
step 2,
Mount the handle

bracket

of the door with the
moved in step 3.
6,

2-12

Set the inner

door

tc the other side

two screws

assembly

you

aside.

re-

REINSTALL
,

2_

.

THE DOOR

If necessary,
glass before

6.

clean both sides
reassembling
it.

of the door

install the six screws

Once all of the
stalled,
and the
properly
aligned,
curely.

screws
edges
tighten

into

the second

\

Place the inner door assembly into the
outer door assembly and align the hinge in
the opening on the side. Fit the inside door
assembly edge completely inside the outer
door assembly.
Loosely

Install a screw halfway
hole from the top.

' Install A
Screw in This Hole

in the door.

are loosely
of the door
the screws

inare
se-

,

Hang the door hinge on the screw you just
installed,
then install the remaining
four
screws in their holes, and tighten the loose
screw
securely_
Make sure that all five
hinge screws are secure.

INSTALL THE NEW HANDLE
FILLER AND HINGE COVER
,

,

InserL the new handle into the side opening of the door. Make sure that the handle

Using a small screwdriver,
hole plugs in the door opening
and install them in the former
in the other
to damage

Hole

side of the dryer.
the finish.

handle

filler

that was pro-

vided with the reversing
kit, hook the top of
the handle filler onto the loosened
upper
door trim, and snap the joined pieces into
place.
2.

seats all the way in the opening,
and that
the holes are all aligned
properly,
then
mount the handle with two screws.
,

Using the new

Hook

the bottom

the lower

remove
the
of the dryer,
screw holes

Plug

2-13

handle

filler onto

it into place.

3.

Repeat steps 1 and 2 to install the hinge
cover on the opposite
side of the door.

4.

Close
latches

Be careful not

of tile

door trim and snap

the

door

securely.

and

make

sure

that

it
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 4
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Fri Apr 20 13:34:37 2007
Author                          : 
Title                           : 
Subject                         :
EXIF Metadata provided by EXIF.tools

Navigation menu