WINIA Electronics 7NFCMC531X 15-INCH COLOR MONITOR User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	101498
Application ID	/oSF6rWKrAFGS74bBRmCSw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	90.15kB (1126912 bits)
Date Submitted	2000-05-22 00:00:00
Date Available	2000-06-02 00:00:00
Creation Date	2000-05-22 18:40:09
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	2000-05-22 19:31:47
Document Title	USERS MANUAL
Document Creator	Acrobat 3.0 Scan Plug-in

GUIDE
= OLOR MONITOR
Model No : 531x
lMPORTANT SAFEGUARDS
l. Rind all cflhm instructions.
2. Snve urese insrnrcuons for later use.
3. Unplug this monitor from rlre
wall outlet oeiore clenning. Do not
‘ use liquid elennerr or aerosol
cleaners. Use ndnmp clodr (or
cleaning.
4. Do not use nuelrmenls not recommended by
llre monitor mnnufmruerns urey mny enure
lrnznrdr.
5, Do notuse mir moniwrnear werer, eg. oenr a
bum. wrsooowt kitmn rlnle or lnrndry tub,
innwer orsernenr,ornenrnrwinrming poolere.
6. Do om plrne rlrir mpnlrnrnn nn
, unstable can. rune or table. The
monitor mny mi. causing serious
' injury in n ulrild or adult and
reriour dnmnge lo rlre appliance.
1. Slonr nnd warnings in rlre
orniner rnd rlre back or oouom ue
4 provided for venrilnrion. ro ensure
4», e relinole opaaLiAan of rlre moniror.
rnd ro protect it from over-liming.
rlrere openingr must nor be blocked or covered.
the openings should never be blocked try
placing lire monitor on r bed. sch. rug. or other
nimilrr surf-oe. this monitor should us er oe
plnced nenrorover n rndinaor ortieuregr ier.
rnir monitor should not be plreed in n butllein
innrnllrrion inch at n bookcnre nnlnst proper
vmlilaiinn ir provided.
3. this monitor should be opernied
only from are rype of power rouroe
indicsca on me marking inner. lf
you nre nor rure ofme power
iupplled to your lrome, consult
your monitor denler or loerl power company.
9. This mnniror is equiwed wlui a
@ s-wire lmnndingvtype plug, mi
ii. eplug nnving n mind '
(grounding) p Thu. plug will
only fir into n minding-
powerouuer.msisnnrrery fennure. younre
unnlrle in nreri the plug inro me ourlet. eonrnei
yourelecm oorepleee your ooroleie outlet.
no not deteni the purpose oflhtmmdlng-typc
tin-s
' ID. Do not ullow no thing iorerl
,‘ on the power card. not locate
this monitor wlrere the cord will he
roused lry people walking on it.
it. Follow on warnings end instructions marked
on me monitor.
12. rorndded pnoueoiion for urir
monitor drning r ligrrrning srprm
or wnur r is en unnrremed nod
unused for long per-iodr of time.
unplug il from me well outlet. This
will puvenldamage to die monlror nnd/or roe
compulerdne in lightning and power lioe rurger.
13. Do not overload wall millet: and amnion
cords is this can result in fire or electric shock
14. Never purn org-err; ofeny land into urir
monitor through cabinet slots, as rlrey mny touch
drngerour volrnge poinrr or soon our parts mu
could rerulr in n fire or eleerrie shock. Never spill
liquid ofnny lrind on me moniror.
ls. Donor urempuo service rlris
monlror yourself. nr opening or
removing covers mny expoie you
mm voluget or ollrer
. Refer rll servicing ro
nunllrred servioe personnel.
16. Unplug uur monitor from rlre wall ourler and
refer rervioing to qualified nervloe personnel
unoer the following oondiuonr:
u What are power cord or plug is nnmnged or
trnyed
o. if liquid lrrn been spilled into the monitor.
is. [nine monimrlrnr been exposed 1.0 min or
wuer.
d. ltrlre moniror doer noeopernle normnlly by
following roe opernrinp inunreriom. Adjust only
moreoonuolrrlnrrnreeoveredoyrlreopmring
inriruelione nr imprwpa nqusimeur or oelrer
eontrols mny reenlr ln enmngo end will often
require exiensive work try n qunlirred technician
in rerrore nor-mnl operation.
e lfure nwniwrhas been dropped or ure cnoiner
hrs been damaged.
t. When the monitor exhibits a distinct ctr-age in
purormnnee. uris imam a need for service.
l7.wr.en roemenlpnrrsnre
é mmhengnememvice
uchnician on used replneemenr
prru specified by ure mnnurnerurer
me our I‘ll-v: the nine clinreoterisrier as
on'y'nal pnrr. nrrrdrorined snihstitmions
mny result in fire electric shock. orourer
limrds.
it. Upon completion otnny reryiee orrepnirs to
mix monitor ask are rewioe technician to
perform rou ne snl'ery checks to determine rlrnr
rlre moniror is safe in opeme.
FEDERAL COMUNICATIONS COMMISSION
RADlO FREQUENCY INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device. ptnsuant to Part 15 of the FCC Rules. Thm
limits are designed to provide reasonable protection against harmful
inwrfcrencc in a midential installation. This equipment generates, um and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference in radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause hamtful
interference to radio or television reception, which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Inmase the separan'on betwwn the equipment and receiver.
- Connect the equipment to an outleton a circuit different from that to
which the receiver is connoctcd.
- Consult the dealer or an experienced radio or TV inchnician for help.
BANANA“ NOTICE
’l1|is Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Allis CANADIEN
Cet appateil numérique de la Class B respectc mums les exigences du
RAglement sur le materiel brou'tlleur chi Canada
WICHTIGE INFORMATIONEN
Bim lesen Sie alle diese Informationen, bevor Sie das Gerai in Beuieb
nehmen! Lesen Sie sich anBen'lem die Bedienungsanleimng komplett und
sorgflllig dutch. da our in diesem Fall eine problemlose [nbelriebnnhme
erwanei werden kann.
' Achten Sie damuf, daB daa Germ nur in eine 230V Schuko-Smkdose
einguteckt wird.
Die Sieckdose sollLe jedefleit fiei zugiinglicli sein um bei einem evLI.
auftrebenden Noifau dns Germ schnell vom Netz zn n'ennen.
‘ Achien Sie desweiteren damuf, daB die Neuanschhiflleimng nicln
mechanisch beansprucln oder sonsrwie besclifidigt wirdi
' Offnen Sic dos Gel-at niemals! lm lnneren befinden sich Teile mi!
gefihrlicller slimming
Bevor Sie das Germ reinigen, ziehen Sic biue den Netzslecker nus def
Sleckdose. Silubern Sie dann das Germ mit einem feuchten (keinesfalls
Lropfnassen) Lappen.
‘ Die in diesem Geri: enisiehende Rontgenstrnlilung is! ausreichend
nbgeschirmi (Onsdosisleismng in 0.1m Absiand weniger als [Du Sv/h).
Beschleunignngsspmnung maximal 29kV.
Stelien Sie das Geriil an einem ergonomisclt giinstigen on out und
sot-gen Sie damr, daB dcr Monitor mil nach GS-VW-SG7 gepriifler
Peripherie beuieben win'L da nur umer diesen Umstfinden ein optimaler
ergonomiseher Ben-let; des Gemes sichergestetlt isr.
Falls Sie dennocli Fragen liaben, auf die die Bedienungsanleimng keine
hinreichende Antwan geben kann, so kontaku'eren Sie hitte den niiclisien
Fachhilndler,
Mnschinenlanninfmmnxionsverordnung 3A GSGV, 18.01 1991:
Der arbeirsplatzbezogene Schalldmckpegel betray 70 dB (A) ode:
WenigergemflB ISO 7779,
Mnmswoo
DECLARATION OF CONFORMITY
We, Manufactured Importer
DAEWOO ELECTRONICS CO. Ltd
54h S-Ga‘ Namdaemoon-Ro,!ung-Gu
Seoul. Korea
declare under our sole responsibility that the product,
Color Dis lay monitor
5 [X
to which this declaration relates is in confonuity with
the following standard(s) or other normative document(s)
Safety : EN60950/l992/A1: l993/A211993
A3: 1995/A4: 1997
EMC : EN 55022/8J994, EN 50082-1/1992
EN 60555 Pan 2 3/1987
following the provisions of 89/336 EEC-EMC Directive
and the provisions of 73/23 EEC-Low Voltage Directive,
Handed over by : sleet Managing Director.
Display Business Division
Jan, 2000 Seoul Signature: fif—
SLee, Mmlzlng Dll'ec'nr.
kalny anlnu Dlvklon.
DAEWOO usakomcs Co» Ltd
Emission Characteristics Tested by SEMKO
A sample of this type has been tested and has shown compliance with the
guidelines in the swedish document MPR II,
This product is also designed for IT power system with phase to phase
voltage of 20V,
The power cord is used as nmain disconnect device. Disconnect the
power card before servicing, The outlet must be installed near the monitor
and must be easily accessible.
As an ENERGY STAR® Partner, Daewoo Electronics Car, Ltd has
determined that this product meets the Energy Smr® guidelines for energy
efficiency.
The appliance is not intended for use by young children or infirm persons
without supervision ;
Young children should be supervised to ensure that they do not play with
the appliance.
CONTENTS
introduction
Product Features
Setup 44444
Installing the Tilt/Swivel Stand
Connecting the Signal Cable and Power Cord...“
Power Management System
BBC for Plug & Play
Operation Ea Adjustment
Specifications ,.
Factory Preset Timings
Troubleshooting 44444 11
Appendix
Description for D-sub Connector
INTRODUCTION
This manual explains how to correctly install, operate, and get
the best performance from your monitor. Please read this user's
guide carefully before installing your monitor. then keep it near
your monitor for quick reference
First, please check that the contents of the box corresponds with
the following checklist :
' Color monitor
‘ Power cord
' User’s Guide
' Tilt/swivel stand
‘ Warranty Card (Optional)
if any item is missing or damaged. please contact your dealer
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English- I
PRODUCT FEATURES
' The convenient and user-friendly onscreen display allows for
easy and accurate adjuso-nents of horizontal and vertical screen
size and position, geometry and screen color.
' The monitor supports a safe working environment in strict
compliance with the MPR 11 standard for low emissions (TCO
Optional),
‘ The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
° The monitor features Advanced Color Controls for fine~tuning
to meet your own personal tastes or application requirements
Use the on-screen controls to adjust the color temperature.
RGB gain value for the best possible screen color and intensity
' Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally. not
receiving a signal or is receiving a signal that is out of scanning
ranger
' Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
0 The “borderless” full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace
English - 2
SETUP
INSTALLING THE TILT/SWIVEL STAND
1. Ensure that the power is off to the monitor.
2 Set the monitor face down with the underside facing you
Please be careful not to scratch the monitor screen.
3, Align the four books on the stand with the guide holes on the
bottom chassis of the monitorr
4. insert the hooks into the guide holes.
Sr Slide the tilt/swivel stand toward the front of the monitor until
the latch locks in position.
6. Turn the monitor and the stand upright.
If you want to remove the tilt/swivel stand on the monitor. press
the latch and pull the tilt/swivel stand toward the back of the
monitor: Lift the stand to separate.
English-3
—_——_—__
CONNECTING THE SIGNAL CABLE AND POWER
CORD
l, him off the computer and monitor.
2 Connect the 15 pin D-sub connector to the output port of the
video card in your computerl
3A Tighten the screws of the connector.
4. Plug the power cord into the AC receptacle located on the back
of the monitor.
5. Plug the other end of the power cord into the AC outlet.
‘ Signal Cable
K Power Cord
English - 4
H“
POWER MANAGEMENT SYSTEM
If you use the monitor with a computer that complies with the
power-saving program, you can set the monitor to go blank when
the system has remained unused for a period of time To specify
the period or to disable this feature. set the system timeout field
of the computer’s system setup program or use special software
for power-saving. See the computer user‘s manual for the details
of using the system setup. While the monitor is in power-saving
mode (blank screen), it consumes less power than when it is in its
normal state. The color of the power LED will indicate the state.
To restore the screen image‘ press any key of your keyboard or
move your mouse if the signal cable is connected loosely or
disconnected. the power-saving feauire will not operate.
DISPLAY DATA CHANNEL FOR PLUG AND PLAY
If you use the monitor with a computer that complies with
DDCl/‘ZB/CI of VESA. the host video card automatically
configures itself without your hitervention in I way that best fits
the attached monitor The Display Data Channel (DDC) allows
the monitor to inform the host system about configuration
information for optimum use of the monitor. Use of the video
card utility is not required to match the resolutions and refresh
rates of the monitor and video card.
English-5
OPERATION & ADJUSTMENT
Control Panel
®
BRIGHTNESS MENU CONTRAST
Move cursor to the right window on the OSD
windowl
Increase the value of any selected function
Move cursor to the left window on the OSD window.
Decrease the value of any selected function.
Launch OSD(0n-Scrcen Display) MENU window.
Move cursor to the high window on the OSD
window.
Increase the value of V.size or Vfienter.
Move cursor to the low window on the OSD windowl
Decrease the value of Vsize or “center:
English ~ 6
' When you choose the icon on the OSD window, you can
exit the OSD screen
Hot Key
BRIGHTNESS
3}
_:l
050@
English-7
05!) Functions
we, was \ ail
\ »
Adjust the left and right margins for more
U PIMCUSHION convex or more concave margins.
Adjust the trapezoid of the screen by
D TRAPEZOID moving the lines inward or outward.
DPAmunootwr
Adjust the parallelogram when the screen
is leaning lefi or'r-iglrte
D pm mace
Adjust the side balance when the sides of
the screen are bowed towards left or right
Cl
ROTATION
Adjust the rotation when the screen is
tilted left or right (Optional).
D r. r-rrr marten
Ad'ust tlrepin comer when the top
sidis of the screen are‘lorgwed
D a. Pin comer!
Adjust the pin coma bottom when the
bottom sides of the screen are bowed.
M. 05ng 3, Adjust the position of the display
51 horizontally (left or right) and vertically
v. CENTER (“pm do“,
Choose diflml preset color
g‘K eaten rerun lemperamres or set your own customized
color parameters
0 rten cam Adjust the red gain.
0 GREEN emu Adjust the green gain.
0 sure earn Adjust the hiue gain,
-| it WE '- Adjust the width (horizontal size) and the
V. 5.15 height (vertical size) at lire displayt
English - 8
Qwfifim
, man an,
Depussing keeps the monitor free from
BEGAUSS unwanted magnetism that can result in
’ color impurity
sums 231m manta! a: vertical fi'oqtrency
@ u. MOIRE mfifimm picture moire
v. MOIRE mhtfimfl picture moire
Q uuouaoe
@ necAu.
Self Diagnosis
Select language [or OSD (5 languages}
Reset the screen to the Factory Preset
Display Settings.
When the monitor doesn‘t display, if you press any key, Self
Diagnosis screen is displayed Self Diagnosis function checks
if the status or the monitor is No Signal or Out of range
No Signal screen is displayed when
the D-Sub signal connector is not
connected or the status of the monitor
is on DPMS mode.
Out of Range screen is displayed
when the applied frequency is under
or over normal range.
= I Normal range
pculruveermee Hz30-54Kl-lz
mm“ V:50-160Hz
English?
SPECIFICATIONS
CDT Size 15»inch
origami visible image area 14—inch
Dot Pitch 018 mm
Synchronization Horizontal 30 - 54 lG-lz
Vertical 50 — 160 Hz
Plug and Play DDCl/ZB/Cl
Power Saving EPA, VESA DPMS, Nutek Compliant
| Power Source l“100-240 Vac, 50/sz (Free Voltage)
Power Consumption
(set with stand)
Dimemion-W x H x D
70 W
360 x 377 x 389mm
Weight-unpacked
(“K/K8)
Lift/11.5
Operating Temperature
10 - 40°C150 - lO4°F
. FACTORY PRESET TIMINGS
Q « l m
VGA 640 x 480 31.5 60 Non-interlaced
VESA VGA 75 640 x 430 37.5 75 Non-interlaced
VGA" nox 400 ' 31,5 70 Non-interlaced
VESA 46K 800 x 600 46,9 75 Non-interlaced
VESA SVGA xs soc x 600 53.7 85 Non-interlaced
" VFSA 60K 1024 x 768 60.0 75 Non-interlaced
Ettalish - m
TR
OUBLESHOOTING
Check if power switch and compulcr power switch
are in the on position.
Gieck if the signal cable is correctly connected to
the video card.
Check if the pins 01’ D subconneetor are not bent,
Check if the computer is in the power- saving mode.
POWER LED is not
lit.
Check if power switch is in the on position. -
Check il the power cord is comedy oonneeted.
Image is unstable. Check if the signal cable is suitable to the video card.
Image is not Adjust HAW Size or H&V Position to get the proper
centered, too small image.
or too large
_:
Piclure bouncs or n Keep the devices that may cause electrical
wave pattern is interference away from the monitor.
present in the 1
picture. See the FCC information at the front cover of the
mullet
Color looks hlolehy.
Operate Deganss once,
Picture is hlurrecL Adjust Contrast and Brightness.
Operate Degauss onoer
Edgs or available Adjust Geometry Control (Pincusliion, Trapezoid).
area on the screen
are not straight
Kntflislh I i
APPENDIX
DESCRIPTION FOR NUB CONNECTOR
GND-Red
GND~Green
GND~Bkue
+5Vdc
GN'D-HSync
GN'D—V.Sync
Bidirectional Dm(SDA)
Horizonml Sync
Venice] Sync(VCLK)
Dam Clock(SCL)
* GND=Gmund
S/N19978629900

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:05:22 19:31:47
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 2000:05:22 18:40:09
Page Count                      : 11

EXIF Metadata provided by EXIF.tools