WINIA Electronics 7NFCML500 User Manual

Dongbu Daewoo Electronics Corporation Users Manual

Users Manual

Download: WINIA Electronics 7NFCML500 User Manual
Mirror Download [FCC.gov]WINIA Electronics 7NFCML500 User Manual
Document ID46718
Application IDoYyH4HBF3P4hq7bxFpiOwg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize80.65kB (1008119 bits)
Date Submitted1999-07-09 00:00:00
Date Available1999-08-04 00:00:00
Creation Date1999-07-07 12:26:45
Producing SoftwareAcrobat 3.0 Scan Plug-in
Document Lastmod1999-07-07 12:27:41
Document TitleUsers Manual
Document CreatorAcrobat 3.0 Scan Plug-in

TFT LCD—MONITOR
Model No-: LSOOB
\\
IMPORTANT SAFEGUARDS
I. Read all ol'lhese Instructions.
2. Save flies: instructions for lxler use.
3. Unplug lIlis rnonltor from the
wall oullet before cleaning. no not
, use liquid cleaners or aerosol
cleaners. Use a damp clollt for
cleaning.
4. Do not use attachments not recommended by
the monitor manursciurer as they may cause
harards.
5, Do no! use this monitor near water, e.g., near a
bllhlub. Wishbowl, kilchan sink. or laundry tubs
in a wet basement, or hear u swimming pool. etc.
6. Do not place this monitor on an
. unstable cm. stand, or table. The
monitor may fall. causing serious
i yury to a child or adult. and
serious damage to the applianoe.
7, Slow and openings in the
m ' earrings-(d the back or bottom are
. provi or ventilllion. to ensure
—-—‘.’e reliable operation or the rnoni .
and to protect it from overheaung.
These openings mnslnol be blocked or covered
The opening: should never be blocked by '
placing the monitoron a bed, sorn. mg. or other
similar surface. This monitor should never be
placed near or over a radiator or hear register.
This monitor should not be placed in a bull Ill
installal on such as a bookcase unless proper
venrilation is provided.
. s. This monitor should be opcnwd
only from the rype or power source
indicated on me marking label. If
you are not sure 0! the power
supplied in your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire groundinguype plug, Thai
is. a plug having a ird
(grounding) pin. This plug will
only fit inro a grounding-type
power outlet. This is a sarery leamrc. it you are
unable to insert the plug iruo lhe outlet, contact
your electrician Io replace your obsolete outlet.
no not defeat the purpose or the groundinguype
p rig.
to. Do not allow anything lo rest
on the power cord. Do not locate
lhis monitor where the cord will be
abused by people walking on ll.
l 1. Follow all wnmmgs and inslmclions marked
cm the monitor.
lz. For added protection roe lhis
monitor during a lighnring storm,
or when it is tell unlitmded and
unused tor long periods or time.
a“ unplug it from the wall outleL This
will prevent damage in the monitor and/or lhe
computer due to lighnring Ind power line nrrges.
l3. Do not overltnd will onllets and extension
colds is this can result in fire or electric shock.
I4. Never push objects of any kind inio this
monitor through cahiner slots, is they may touch
dangerous voltage points or short out pans that
could result in a fire orelecrrie shock. Never spill
liquid or any kind on the monitor.
15. Do not arwmpr to service this
monitor yourseli. as opening or
removing covers my expose you
to dangerous voltages or other
haunts. Refer all servicing to
qualified service personnel.
lo. Unplug this monitor from the wall outlet and
"refer servicing Ix) qualified eervioe personnel
- under the following conditions:
u.Whenuiepowercordorplugisdanr-gedor
frayed.
h, lniquid has been spilled Into the monitor.
c. lt the monitor has been exposed to rain or
water.
d. lt the monitor does not operate normally by
following the opeming insunelious. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls mly mwllin dlmxge and W"! am
require extenslve wortr by a qualified teclmieim
to restore normal operation.
e, lfthc monltor has been dropped or the cabinet
has been damaged.
f. When the mornilor exhibils A dislinct change in
perfmlntx, this indicates I need for service.
17 When replmetnml pm are
required be sure the service
teeluncim has used replacement
parts specified by lhe manurnernrer
that have the same characteristics as
the original pm Unauthorized substirulions
may result in fire. electric shock, or other
hazards.
18. Upon completion orany servioe or repairs to
this monitor, ask the service let: in to
perform routine rarely checksm determine that
the monitor is safe to operate.
7 FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE: This equipment hésbeen tested and found to comply with the limits
(or a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and. if not installed and used in
accordance with the instructions. may cuase harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radioror television reception, which can be deten-nined by
turning the equipment off and on, tlte user is encouraged to try to comet the
interference by one or more of the following measures * ‘
- Reorient or relocate lhe receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
~ Consult the dealer or an experienced radio or TV technician for help,
CAUTION: Any changes or modifications not expressly approved by the
putty responsible for compliance could void the user's authority
to operate the equipment
CANADIAN DEPARTMENT OF COMMUNICATIONS
COMPLIANCE STATEMENT '-
This digital apparatus does not exceed the Class A/Class B (whichever is
applicable) limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of
Communications.
Avis dc confomlité aux nomies du Ministére ties Communications du ‘
Canada
be present appareil numérique n’emet pas de bruits radioélectriques
dcpasstlnt les Iimites applicables aux uppareils numériques dc Class A/de
Class B (salon Ie cus) prescrites dans lc réglement sur le brouillage
radioélectrique édicte par Ie ministére des communications du Canada,
WICHTIGE lNFORMATIONEN
Bitte lesen Sie alle diese lnformationen. bevor Sie dxs Gerat in Betrieb
nehmen! Lesen Sie sich anBerdem die Bedienungsanleitung komplett
und sorgt'éltig durchr da nor in diesem Fall eine problemlose
Inbetn'ebnahme erwartet werden kann.
' Achten Sie darauf, dal} das Gerat nur in eine 230V Schnko-
Sleckdose eingesteckt wird.
- Die Steckdose sollte jederuit frei zuginglich sein um bei einem
evtL auftretenden Notfall das Geri! schnell vom New zu trennenr
' Achten Sie desweiteren darauf, daB die NetzanschluBleitung nicht
mechanisch beansprucht oder sonstwie beschidigt wird.
' Offnen Sic das Geri! niemals! 1m Inneren befinden sich Teile mit
gemirliclier Spannung.
° Bevor Sie das Gerat reinigen, ziehen Sie biue den Netzstecker aus
der Steckdose. Siubem Sie'dann das Gem mit einem t‘euchten
(keinesfalls tropfnassen) Lappen.
' Stellen Sie das Gerfl an einem ergonomisch gunstigen Ort auf und
sorgen Sie damn daB der Monitor mit nach GS-VW-SG7 gepmfter
Peripherie betrieben wird, da nur unter diesen Umsfinden ein
optimaler ergonomischer Betrieb des Geriles sichergestellt isL
Falls Sic dennoch Fragen haben. auf die die Bedienungsanleitung keine
hinreichende Antwort geben kann. so kontaktieren Sie bitte den
nichsten Fachhandler.
Maschinenlfirminfonnationsverordnung 3. GSGV, 18.01 1991:
Der arbeitsplatzbezogene Schalldruckpegel betragt 70 dB (A) oder
wenigergemfiB ISO 7779.
Wmewoo
DECLARATION OF CONFORMITY
We, Manufacturer/ Importer
DAEWOO ELECTRONICS C0.. Ltd
541, 5—62. Namdaemoon-RoJung-Gu
' Seoul. Korea
declare under our sole responsibility that the product,
TF1‘ LCD monitor
LSOOB
to which this declaration relates is in conformity with
the following standard(s) or other normative document(s)
Safety : EN60950/1997JA1: 1993/A2: 1993
A3:1995/A4:1997
EMC : EN 55022/8.1994, EN 50082-1/1992
EN 60555 Part 2, 3/1987
following the provisions of 89/336 EEC-EMC Directive
and the provisions of 73/23 EEC»1.ow Voltage Directive.
Handed over by : Sine, Managing Director.
Display Business Division
May, 1999 Seoul Signature: fif—
S‘Lee, Managing Director.
Display Business Divlslon.
DAEWOO ELECTRONICS C‘o., Ltd
glfi
Emission Characteristim Tested by SEMKO
A sample of this type has been tested and has shown: compliance with
the guidelines in the swedish document MPR lL ’
This product is also designed for IT power system with phase to phase
voltage of 230V4
The power cord is used as a main disconnect device. Disconnect the
power cord before servicing. The outlet must be installed near the
monitor and must be easily accessible.
As an ENERGY STAR Partner. Daewoo Electronics Co, Ltd. has
determined that this product meets the Energy Star guidelines for
energy efficiency.
The appliance is not intended for use by young children or infirm
persons without supervision :
Young children should be supervised to ensure that they do not play
with the appliance.
CONTENTS
Introduction
Product Features ....................................
Setup
Connecting the Signal Cable and Power Cord
Power Management System
BBC for Plug & Play .....
Operation & Adjustment u, .........
Specifications
Factory Preset Timings ................
Troubleshooting ............................
Appendix «
Description for D-sub Connector
“TNTRODUCT ION
This manual explains how to correctly install' operate and get the
best performance from your monitor. Please read this user's
' guide carefully before installing your monitor, then keep it near
your monitor for quick reference
First, please check that the contents of the box corresponds with
the following checklist :
' TFI‘ LCD monitor
3 Powercord" & Afll
° User's Guide
- Warranty Card (Optional)
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - l « A
%%
PRODUCT FEATURES
The convenient and user-friendly on—screen display allows for
easy and accurate adjustments of horizontal and vertical screen
size and position, geometry and screen color.
The monitor supports a safe working environment in strict
compliance with the MFR 1! standard for low emissions .
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility
Advanced microcircuitry makes setup and configuration fast
and effortless.
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and
intensity.
Press the menu button and {activate the Self~Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of
scanning range.
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
The “borderless” full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace
English - 2
CONNECTING THE SIGNAL CABLE AND POWER
CORD
‘ 1. Turn off the comleeTand monitor.
2. Connect the 15 pin D-sub connector to the output port of the
video card in your computer
3. Tighten the screws of the connector.
4: Plug the Adapter cord into the DC Jack located on the back of
the monitor.
5. Plug the other end of the power cord into the AC outlet
D-Sub
{kgnnector
Adapter Cord
English . 3 . r
POWER MANAGEMENT SYSTEM 7 OPE 110" & ADJUSTMENT
If you use the monitor with a computer that complies with the ‘ Control Panel
power-saving program. you can set the monitor to go blank when ' '. \\
the system has remained unused for a period of time. To specify
the period or to disable this feature, set the system timeout field BRIGHTNESS MENU CONTRAST
of the computer‘s system setup program or use special software C) (a) (nfi
for power-saving. See the computer user’s manual for the details . ‘~ _ _ , ,_,_ 4
of using the system setup. While the monitor is in power-saving
mode (blank screen), it consumes less power than when it is in its
normal state. The color of the power LED will indicate the state.
To restore the screen image, press any key of your keyboard or (E;
move your mouse. If the signal cable is connected loosely or
disconnected, the power-saving feature will not operate.
0‘ Move cursor to the right window on the OSD
window.
Increase the value of any selected function.
° Move cursor to the left window on the OSD
DISPLAY DATA CHANNEL FOR PLUG AND PLAY a) window.
If you use the monitor with a computer that complies with 0 Decrease the value of any selected function.
DDCl/ZB of VESA, the host video card automatically configures
itself without your iniervention in a way that best fits the attached
monitor. The Display Data Channel(DDC) allows the monitor to
inform the host system about configuration information for
optimum use of the monitor. Use of the video card utility is not
required to match the resolutions and refresh rates of the monitor
and video card.
Launch OSD(0n~Screen Display) MENU window,
- Move cursor to the high window on the OSD
window.
fit?
0 Increase the value of V.size or V.centen
Move cursor to the low window on the OSD
window.
Decrease the value off/size or V.centero
English - 4 » English . 5 ~
Key Process ‘ OSD Functions
LANG UAGE
lCON CONTROL FUNCHONS
CLOCK t
ax
LANGUAGE Select language for OSD (5 languages).
ENGLISH
Deurscn
EsPANoL
FnAncArs
l‘l’ALI ANO
CLOCK Adjust the width (horizontal size).
W \
{LOCK "NE “Jud— ‘HAE aL‘srinflfiuaI/‘Jfé
fijufihm ‘quf'd flak flaw" afiw “to, ”clock
WWW WIT—gnaw 0» claw
Choose different preset c lor St
8K COLOR TEMP temperatures or set your own customized
color parameters,
RED GAIN Adjust the red gain,
FIT SCREEN
GREEN GAIN Adjust the green gain.
BLUE GAIN Adjust the blue gain.
H. CENTER & Adjust the position of the display
0 When you choose the icon H on the OSD window. you can exit the horizontallyfleh or right) and vertically
OSD screen, V- CENT“ (up w down).
Adjust the display width & height at the
F" SCREEN same time,
Hot Key rum
s Ad' tth d's l ima ual't L
BRIGHTNESS CONTRAST m, ~ J“ ° ‘ Pay E” ‘Ysm ‘
s "G (nemescmem meeLeo. ”guf/
a 0 AUTO Adjust the horizontal and vertical picture
-: —:| ' a ualit A
e 50 <9 9 50 e TRACKING lm seq y
English - 6 ,. English - 7
Icon con-mot. rune-nous
OSD Ad' t th d' l OSD M
"ME our leS e lsp ay enul
"Am, Display horizontal & vertical frequency
and polarityl
© RECALL
Reset the screen to the Factory Preset
Display Settings.
AUTO
E] POSITION
Self Diagnosis
Adjust the display horizontal and vertical
pbsition at the same time
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks if
the status of the monitor is No Signal or Out of range.
No slGHAL
our or RANGE
H: W-Si K»:
v: some Hx
Pt: nlsruv “Truss
cmzc‘n
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
INormalrane
H:30»68K z
V:50-85Hz
English - 8
r SPECIFICATIONS
Panel Size
l5.1-inch (38cm) diagnol
Pixel Pitch «L1 0.3 x03 mm
Synchronization | Horizontal 30 - 68 KHz
| Vertical
Plug and Play
50 - 85 Hz
DDCl/2B
Power Saving
1 Power Source
Power Consumption ~
Dimension-W x H x D(ne|1gross)
EPA, VESA DPMS, Nulek Compliant
100-240 Vac. 50/60Hz (Free Voltage)
15W(without adapter)/30W(with adapter)
Weight(net/gross )
Tilt/Swivel Range Hill
| Swivel
390 x 40145 x 735mm /520 x 502 x 242mm
4.5/7 K g '
99/154le
5“ forward, 30° backward
1: 90° leftward, rightward
I Operating Temperature
lO~ 40°C /50 ~104°F
FACTORY PRESET TIMINGS
Mode éofxfi) HquGG-Iz) VBufl-lz) Remark
VGA 480 640 x 430 ‘ 3145 so Nun-interlaced
VGA 400 720 X 400 3L} 70 Non-interlaced
VESA 46K 800 x 600 46.9 75 Non-interlaced
VESA sch 85 300 x 600 53.7 85 Non-interlaced
VESA 60K I024 X 768 6017 7S Nun-interlaced
VESA [024/85 1024 x 768 537 " 85 Non-interlaced
VESA 1321/15 lmx ma ms 75 Non-interlaced
VESA 1024/60 ID“ x 768 433 so Non-interlaced
English ~ 9
TROUBLESHOOTING
Symptom Cheek
No picture. Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D subconnector are not bent,
_. _ Check if the computer is in the power- saving model
POWER LED is not Check if power switch is in the on position.
in. i
' Check if the power cord is correctly connected.
Image is unstable. Checkif the signal cable is suitable to the video card.
Image is not Adjust H &V Size or H&V Position to get the proper
centered, too small image.
or too large.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is interference away from the monitmn
present in the i
picture. See the FCC information at the front cover of the
manual.
Picture is blurred. Adjust Contrast and Brightness,
Edges of available
area on the screen
are not straight.
Adjust Pincushion/‘l‘rapezoid.
English - 10
_ m
’ APPENDIX
DESCRIPflON FOR D-SUE CONNECTOR
Pin Signal
I Red
2 Green
3 Blue
4 GND
5 GND
6 GND-Red
7 GND-Green
8 GND-Blue
9 +5Vdc
10 GND-H.Sync
| 1 GND-V.Sync
12 Bi-directional Data(SDA)
13 Horizontal Sync
14 Vertical Sync(VCLK)
15 Data Clock(SCL)
>|= GNU-Ground
English - ll ' ~

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:07:07 12:27:41
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:07:07 12:26:45
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5F7NFCML500

Navigation menu