WINIA Electronics 7NFCML700CAV TFT LCD Monitor User Manual L700CAV Users Manual

Dongbu Daewoo Electronics Corporation TFT LCD Monitor L700CAV Users Manual

User Manual

Download: WINIA Electronics 7NFCML700CAV TFT LCD Monitor User Manual L700CAV Users Manual
Mirror Download [FCC.gov]WINIA Electronics 7NFCML700CAV TFT LCD Monitor User Manual L700CAV Users Manual
Document ID229556
Application IDWNQ9GAgowiUlzd96Fto7SQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize70.69kB (883576 bits)
Date Submitted2002-03-06 00:00:00
Date Available2002-03-06 00:00:00
Creation Date2002-03-05 19:01:54
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2002-03-05 19:01:54
Document TitleL700CAV Users Manual.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

USER’S GUIDE
TFT LCD-MONITOR
Model No : L700CAV
http://www.dwe.co.kr
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
WICHTIGE INFORMATIONEN
Bitte lesen Sie alle diese Informationen, bevor Sie das Gerät in Betrieb
nehmen! Lesen Sie sich außerdem die Bedienungsanleitung komplett und
sorgfältig durch, da nur in diesem Fall eine problemlose Inbetriebnahme
erwartet werden kann.
Achten Sie darauf, daß das Gerät nur in eine 230V Schuko-Steckdose
eingesteckt wird.
Die Steckdose sollte jederzeit frei zugänglich sein um bei einem evtl.
auftretenden Notfall das Gerät schnell vom Netz zu trennen.
Achten Sie desweiteren darauf, daß die Netzanschlußleitung nicht
mechanisch beansprucht oder sonstwie beschädigt wird.
Offnen Sie das Gerät niemals! Im Inneren befinden sich Teile mit
gefährlicher Spannung.
Bevor Sie das Gerät reinigen, ziehen Sie bitte den Netzstecker aus der
Steckdose. Säubern Sie dann das Gerät mit einem feuchten (keinesfalls
tropfnassen) Lappen.
Stellen Sie das Gerät an einem ergonomisch günstigen Ort auf und
sorgen Sie dafür, daß der Monitor mit nach ISO 9241 -3, -7, -8
geprüfter Peripherie betrieben wird, da nur unter diesen Umständen ein
optimaler ergonomischer Betrieb des Gerätes sichergestellt ist.
Falls Sie dennoch Fragen haben, auf die die Bedienungsanleitung keine
hinreichende Antwort geben kann, so kontaktieren Sie bitte den nächsten
Fachhändler.
Maschinenlärminformationsverordnung 3. GSGV, 18.01 1991:
Der arbeitsplatzbezogene Schalldruckpegel beträgt 70 dB (A) oder
wenigergemäß ISO 7779.
Emission Characteristics Tested by SEMKO
A sample of this type has been tested and has shown compliance with
theguidelines in the swedish document TCO 99.
DECLARATION OF CONFORMITY
This product is also designed for IT power system with phase to phase
voltage of 230V.
We, Manufacturer / Importer
DAEWOO ELECTRONICS CO., Ltd
541, 5-Ga, Namdaemoon-Ro, Jung-Gu
Seoul, Korea
declare under our sole responsibility that the product,
TFT LCD monitor
L700CAV
to which this declaration relates is in conformity with
the following standard(s) or other normative document(s)
Safety : EN60950/1992/A1:1993/A2:1993
A3:1995/A4:1997
EMC : EN 55022/8.1994/A1:1995/A2:1997
EN 55024/1998
EN 61000 -3-2,3/1995
following the provisions of 89/336 EEC-EMC Directive
and the provisions of 73/23 EEC-Low Voltage Directive.
Handed over by : Jong K. Choi, Director.
Display Business Division.
Dec , 2001 Seoul
Signature :
J.K.Choi Director.
Display Business Division.
DAEWOO ELECTRONICS CO., LTD.
The power cord is used as a main disconnect device. Disconnect the
power cord before servicing. The outlet must be installed near the
monitor and must be easily accessible.
As an ENERGY STAR® Partner, Daewoo Electronics Co., Ltd. has
determined that this product meets the Energy Star® guidelines for
energy efficiency.
The appliance is not intended for use by young children or infirm
persons without supervision ;
Young children should be supervised to ensure that they do not play
with the appliance.
CONTENTS
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
Connecting the 15 Pin Signal Cable and Power Cord ......... 3
Connecting the Speakers ......................................................4
Connecting the Others .........................................................6
Operation & Adjustment ...................................................... 7
Specifications ......................................................................... 14
Factory Preset Timings ......................................................... 16
Changing the Stand ............................................................... 17
Troubleshooting ..................................................................... 19
INTRODUCTION
This manual explains how to correctly install, operate and get the
best performance from your monitor. Please read this user’s
guide carefully before installing your monitor, then keep it near
your monitor for quick reference.
First, please check that the contents of the box corresponds with
the following checklist :
TFT LCD monitor
Power cord
15 pin signal cable
Audio cable (mini-jack)
DC adapter
Speaker
User’s guide
Warranty card (Optional)
Appendix
Description for D-sub Connector
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - 1
SETUP
PRODUCT FEATURES
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
The monitor is designed for use in a small work area or for
those who need more work space on the desk.
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of screen size, position and
screen color.
The monitor supports a safe working environment in strict
compliance with the TCO 99 standard for low emissions .
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and
intensity.
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of
scanning range.
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
The “borderless” full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
The monitor supports the optimal display performance with
1280x1024 at 60Hz.
The monitor can be connected to various types of video
devices with supporting video input signals like Composite
video(CVBS), Seperate video(S-Video).
The detachable stereo speakers make the end user enjoy
powerful audio sound and use them on a location which he or
she wants to place after separating them from the monitor with
ease.
English - 2
1. Turn off the computer and monitor.
2. Connect the 15 pin signal cable to the output port of the video
card in your computer and monitor.
3. Tighten the screws of the 15 pin signal cable.
4. Plug the power cord into the AC receptacle located on the back
of the monitor.
5. Plug the other end of the power cord into the AC outlet.
AC POWER
S-Video
Video
R AUDIO L
15 pin
signal
cable
Power
Cord
English - 3
CONNECTING THE SPEAKERS
ABOUT SPEAKER BUTTONS
1. Align the two hooks on each speaker with the holes on the right
and left side of the monitor and insert the hooks into the holes.
2. Plug the connector of the POWER (DC IN 12V) Jack 1 of the
speaker R into the adapter cord 2 . Plug the other side of the
adapter cord into a AC power outlet.
1/2 VOLUME (UP/DOWN)
adjusts audio volume.
(up) : increases speaker volume. 1
(down) : decreases speaker
volume.
3. Plug the connector of the MONO Jack 3 of the speaker R into
the input port 6 of the speaker L.
3 MUTE
4. Plug the connector of the STEREO (AUDIO INPUT) Jack 5
of the speaker R into the SPEAKER port 4 on the rear of the
monitor.
4 POWER
5. After setting up the speakers, switch the power on and adjust
the volume to the proper level.
7 : Headphone Jack
Speaker R
Speaker L
turns mute function on and off.
turns audio on and off.
5 POWER Indicator
shows power on and off status
with power indicator light.
SPEAKER STAND-ALONE
Push
AC POWER
S-Video
Video
R AUDIO L
English - 4
Use the speakers as shown in the illustration after pressing
down the supporter located on the rear of the speaker if you
don’t attach the speakers to the monitor.
English - 5
OPERATION & ADJUSTMENT
CONNECTING THE OTHERS
CONTROL PANEL
1. Plug the connector to the S-Video port 1 on the rear of the
monitor (ex : VCR, DVD , ---).
1 POWER
2 POWER Indicator
shows both normal operation
and power management status
with power indicator light.
swithes the monitor on
and off.
2. Plug the connector to the RCA port 2 on the rear of the
monitor (ex : Camcorder, VCR, DVD, ---).
3. Plug the connector to AUDIO INPUT port 3 on the rear of the
monitor (ex : Computer, CD Player, ---).
Speaker R
Speaker L
(*)
moves cursor to the right or
low window in the OSD
window and increases the
value of any selected
function.
5 SELECT
moves from top menu to sub
menu in the OSD window
and opens the function
window for the selected icon.
AUTO ( * )
AC POWER
S-Video
Video
launches the AUTO
TRACKING function
directly.
R AUDIO L
8 MUTE
English - 6
mutes and restores sound by
turns.
English - 7
(*)
moves cursor to the left or
high window in the OSD
window and decreases value
of any selected function.
6 MENU
turns the OSD window on.
EXIT
turns the OSD (On-Screen
Display) window off and
moves from sub menu to top
menu in the OSD window.
7 SOURCE
selects input signal in order
(PC--> VIDEO1(S-Video)-->
VIDEO2(CVBS)).
( * ) : Hot Key
ADJUSTMENT PROCEDURE
KEY PROCESS
MENU
1280X1024
80K
UT L TY
75
UT L TY
OSD
EXIT
Adjust the CLOCK control.
OSD
SELECT
UT L TY
No
Is the H.Size
proper?
SELECT
SHARPNESS
EXIT
Yes
Is the
noise displayed on
the screen?
SHARPNESS
Perform the AUTO
POSITION.
No
Yes
EXIT
Perform the AUTO
TRACKING.
OSD OFF
Is the
noise displayed on
the screen yet?
HOT KEY
No
AUTO
AUTO TRACKING
Yes
When there is no OSD, if you press this
AUTO button, you can use the best display
performance fit for a current mode.
Adjust the CLOCK FINE
until the screen is cleared.
Yes
BRIGHTNESS
When there is no OSD, if you press this
BRIGHTNESS button, you can adjust the
brightness directly.
: decreases brightness
: increases brightness
English - 8
Is the
noise displayed on
the screen yet?
No
End
English - 9
OSD FUNCTIONS WITH USING PC
SOUND
VOLUME
Increase or decrease audio volume.
BALANCE
Balance audio sound.
BLUE CONTROL Adjust the blue color.
Choose different preset color
COLOR
temperatures or set your own customized
TEMPERATURE
color parameters.
CENTER
TREBLE
Adjust high frequency response.
BASS
Adjust low frequency response.
H. CENTER &
V. CENTER
Adjust the position of the display
horizontally (left or right) and vertically
(up or down).
UTILITY
CLOCK
CLOCK
Adjust the width (horizontal size) of the
screen image.
CLOCK FINE
Sharpen the focus by aligning the
illuminated pixels and adjust until the
screen image looks focused, crisp and
sharp. Adjusting the CLOCK FINE after
the CLOCK adjustment will produce a
clear screen.
AUTO
TRACKING
Adjust the horizontal & vertical picture
image quality and size.
COLOR
RED CONTROL Adjust the red color.
GREEN
CONTROL
OSD
SHARPNESS
Adjust the display image quality (if the
screen proceed to scaling up).
OSD
POSITION
Adjust the OSD position horizontally (left
or right) and vertically (up or down).
OSD
TIME OUT
Adjust the display OSD Menu.
STATUS
Display horizontal & vertical frequency
and polarity.
RECALL
Reset the screen to the Factory Preset
Display Settings.
AUTO
POSITION
Choose automatically the proper
horizontal position and vertical position &
size of the screen image.
LANGUAGE
Select language for OSD (6 languages).
Adjust the green color.
English - 10
English - 11
SELF DIAGNOSIS
CONTRAST
Adjust the contrast of image, the
difference between light and dark areas on
the screen.
CONTRAST
OSD FUNCTIONS WITH USING VIDEO
VOLUME
Increase or decrease audio volume.
BRIGHTNESS
Adjust the brightness of image.
CONTRAST
Adjust the contrast of image.
COLOR
SATURATION
Adjust saturation of image.
HUE
Adjust the hues of image.
SHARPNESS
Adjust the display image quality (if the
screen proceed to scaling up).
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the DSub signal connector is not connected or
the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
SOUND
BALANCE
Balance audio sound.
TREBLE
Adjust high frequency response.
BASS
Adjust low frequency response.
English - 12
English - 13
SPECIFICATIONS
Panel
Synchronization
Video Bandwidth
Max Resolution
Colors
Display Area
PC Input Signal
AV Input Signal
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Color Filter
Horizontal
Vertical
Sync
Video
Video
Audio
TV Receiving Signal TV Tuner
(Option)
External Speaker
Max. Output
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
(without speaker)
17-inch(43.2 cm) diagonal
0.264 x 0.264 mm
75°(Right/Left)
70°(up), 70°(down)
400:1 contrast ratio(typ)
250cd/m2 brightness(typ)
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
135 MHz
1280 x 1024 a 75Hz
8 bit(16.7M Colors)
337.9mm x 270.3mm
H/V separate(TTL)
15 pin mini D-sub(Analog RGB)
DVI-D(Option)
CVBS(RCA), S-Video(Mini-DIN)
RCA Left+Right Input
Stereo Mini Jack Input & Output
NTSC, PAL
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
6.2/7.6 Kg(13.6/16.7 lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the
quality of the product.
The LCD panel may have some defective pixels (e.g. slightly light or
dark) due to a characteristic of the LCD panel. But there is no defect in
your LCD product itself.
6W(Left 3W+Right 3W)
VESA DDC Compatible
100-240 Vac, 50/60 Hz(Free Voltage)
45 W(without speaker)
420 x 398 x 194 mm(with stand)
420 x 360 x 68 mm(without stand)
English - 14
English - 15
FACTORY PRESET TIMINGS
CHANGING THE STAND
REMOVING THE STAND
VESA MODES
Mode
VGA
Resolution
(dots X lines)
640 X 480 a 60Hz
H.Freq (KHz) V.Freq (Hz)
Remark
31.5
60
Non-interlaced
VGA
640 X 480 a 72Hz
37.9
72
Non-interlaced
VGA
640 X 480 a 75Hz
37.5
75
Non-interlaced
SVGA
800 X 600 a 56Hz
800 X 600 a 60Hz
35.2
56
Non-interlaced
37.9
60
Non-interlaced
48.1
72
Non-interlaced
SVGA
800 X 600 a 72Hz
800 X 600 a 75Hz
46.9
75
Non-interlaced
XGA
1024 X 768 a 60Hz
48.4
60
Non-interlaced
XGA
56.5
70
Non-interlaced
60.0
75
Non-interlaced
SXGA
1024 X 768 a 70Hz
1024 X 768 a 75Hz
1280 X 1024 a 60Hz
64.0
60
Non-interlaced
SXGA
1280 X 1024 a 75Hz
80.0
75
Non-interlaced
SXGA
1152 X 864 a 75Hz
67.5
75
Non-interlaced
Mode
EGA
Resolution
(dots X lines)
640 X 350 a 70Hz
DOS
720 X 400 a 70Hz
SVGA
SVGA
XGA
IBM MODES
1. Remove 4 screws.
2. Remove the stand
REMOVING THE COVER
H.Freq (KHz) V.Freq (Hz)
Remark
31.5
70
Non-interlaced
31.3
70
Non-interlaced
MAC MODES
Mode
VGA
Resolution
(dots X lines)
640 X 480 a 67Hz
H.Freq (KHz) V.Freq (Hz)
35.0
67
Remark
Non-interlaced
SVGA
832 X 624 a 75Hz
49.7
75
Non-interlaced
SXGA
1152 X 870 a 75Hz
68.7
75
Non-interlaced
Mode
Resolution
(dots X lines)
1280 X 1024 a 70Hz
THE OTHERS
SXGA
H.Freq (KHz) V.Freq (Hz)
74.4
70
Remark
Non-interlaced
The LCD Monitor has only Non-interlanced modes without flicker.
English - 16
Remove the Cover.
English - 17
TROUBLESHOOTING
ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION)
Symptom
Check
Picture is jitterd.
Adjust Clock to set the screen position and adjust
Clock fine until a noise isn’t displayed.
No picture.
Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Tighten 4 screws.
Check if the pins of D subconnector are not bent.
Check if the computer is in the power- saving mode.
Use the VESA approved arm-stand.
(100x100 mm hole spacing)
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust Clock or H&V Center to get the proper
image.
Picture bounces or a Keep the devices that may cause electrical
interference away from the monitor.
wave pattern is
present in the
See the FCC information at the front cover of the
picture.
manual.
Picture is blurred.
English - 18
Adjust Contrast and Brightness.
English - 19
APPENDIX
DESCRIPTION FOR D-SUB CONNECTOR
Symptom
No sound.
Check
Check if the speaker power switch and the audio
cable are correctly connected to the computer.
Adjust the volume after checking the sound is muted.
Check the audio system in the computer.
Low sound.
Adjust the volume on the OSD Menu and the
speaker.
Adjust the volume of the sound card in the computer.
Dull sound.
Adjust Bass and Treble on the OSD Menu.
No video.
Check if the video cable is correctly connected to the
computer and set to the video mode.
Poor color in the
video.
Adjust the Saturation or Hue on the OSD Menu in
the video mode.
Grainy picture in the Adjust the Sharpness on the OSD Menu in the video
mode.
video.
Pin
Signal
10
11
12
13
14
15
Red
Green
Blue
GND
GND
GND-Red
GND-Green
GND-Blue
+5Vdc
GND-H.Sync
GND-V.Sync
Bi-directional Data(SDA)
Horizontal Sync
Vertical Sync(VCLK)
Data Clock(SCL)
10
15
English - 20
* GND=Ground

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:03:05 19:01:54-08:00
Modify Date                     : 2002:03:05 19:01:54-08:00
Page Count                      : 14
Creation Date                   : 2002:03:06 03:01:54Z
Mod Date                        : 2002:03:06 03:01:54Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Administrator
Metadata Date                   : 2002:03:06 03:01:54Z
Creator                         : Administrator
Title                           : L700CAV Users Manual.pdf
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5F7NFCML700CAV

Navigation menu