WINIA Electronics 7NFD101 Digital to Analog Converter Box User Manual DA1S GN1DAA AN

Dongbu Daewoo Electronics Corporation Digital to Analog Converter Box DA1S GN1DAA AN

User manual

Owner’s ManualDAC-100 / DAC-200 /DAC-300ENGLISHDigital-to-Analog Converter BoxDigital-to-Analog Converter Box• Electronic Program Guide• Parental Control / Caption / Text• English / Spanish / French support• Auto Clock SettingDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` A mac001 1200DPI 100LPI
1PRODUCT INFORMATIONIMPORTANT SAFETY INSTRUCTIONCAUTION: TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOT REMOVECOVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulated“dangerous voltage” within the product’senclosure that may be of sufficient magnitudeto constitute a risk of electric shock.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating and servicinginstructions in the literature accompanying theappliance.WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE.CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,FULLY INSERT.FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rule. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception; which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experience radio/TV technical for help.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that maycause undesired operation.CAUTION Any changes or modification in construction of this device which are not expresslyapproved by the party responsible for compliance could void the user’s authority tooperate the equipment.DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 1 mac001 1200DPI 100LPI
21 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug hastwo blades with one wider than the other. A grounding type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are provided for your safety. If the providedplug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold withthe apparatus. When a cart is used, use caution when moving the cart/apparatus combination toavoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus hasbeen damaged in any way, such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped.IMPORTANTSAFETYINSTRUCTIONDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 2 mac001 1200DPI 100LPI
3PRODUCT INFORMATIONImportant Safeguards ................................ 1Contents ................................................... 3Read Carefully Before Using ..................... 4Identification of Controls .......................... 5 Remote Control ........................................ 6Connecting to a TV.................................... 8Information Displays ............................... 30Program and Station Guide ..................... 32Normal Operation .................................. 334. BASIC OPERATION 2. INSTALLATIONMenu Overview ........................................ 9Channel Menu Options .......................... 10Option Menu Features ............................ 13Lock Menu Options ................................ 22Specifications ......................................... 34Warranty3. SETUP5. HELP1. PRODUCT INFORMATIONCONTENTSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 3 mac001 1200DPI 100LPI
Please read carefully before using this unit. Placement and handling • The picture and sound of a nearby TV, VCR,or radio may be distorted. In this case,position the unit away from the TV, VCR, orradio.• Do not use volatile liquids, such asinsecticide spray, near the unit. Do not leaverubber or plastic products in contact with theunit for a long period of time. They will leavemarks on the surface.When Not in Use • When the unit is not in use, be sure toremove the disc or tape and turn off thepower. • If you do not use the unit for a long period oftime, remove the remote control batteries toprevent leakage. Moving • The original shipping carton and packingmaterials come in handy. For maximumprotection, re-pack the unit as it wasoriginally packaged at the factory. Cleaning • Use a soft, dry cloth. If the surfaces areextremely dirty, use a soft cloth lightlymoistened with a mild detergent solution. Donot use strong solvents such as alcohol,benzine, or thinner, as these might damagethe surface of the unit. Maintenance • This is a high precision video device. Foroptimal performance, we recommend regularinspection and maintenance every 1,000hours by qualified service personnel.Contact your dealer or nearest service center.Antenna Orientation • Antennas are subject to changes in directionor damage due to wind and rain. For bestresults, contact your nearest service centerabout proper orientation and/or replacement.Using the Remote Control • Operate remote control within 23 ft. (7m) ofthe unit. • Do not press two buttons at the same time. • Do not store in a dusty or humid location.MUTEPRE-CH123456789-0POWERENTEREXITMENUVOLEPGINFOCH-LISTAUDIOCAPTIONASPECTCH23' (7m)Accessories Remote Control &1 Battery RF Cable Adaptor Supporter (DAC-200 only)Owner’s Manual/Warranty • To purchase accessories or additional parts, contact your nearest dealer or service center.MUTEPRE-CH123456789-0POWERENTEREXITMENUVOLEPGINFOCH-LISTAUDIOCAPTIONASPECTCH4READ CAREFULLY BEFORE USINGDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 4 mac001 1200DPI 100LPI
5PRODUCT INFORMATIONFront PanelIDENTIFICATION OF CONTROLSRear PanelRemote sensorPower indicatorConnection to AntennaConnection to TVPower AdaptorConnect to wall outlet. A/V Output Jack DAC-100Channel +/-Remote sensorPower indicatorPower buttonDAC-300DAC-200Power indicatorRemote sensorChannel +/-Power buttonDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 5 mac001 1200DPI 100LPI
6REMOTE CONTROLMUTEPRE-CH123456789-0POWERENTEREXITMENUVOLEPGINFOCH-LISTAUDIOCAPTIONASPECTCHPOWER : Switches the receiver on or off.POWERMUTE : Turns sound ON and OFFMUTENumbers : Chooses channels and enters programminginformationDash : Enters a channel number for multiple programchannels such as 2-1,2-2, etc123456789-0PRE-CH : Chooses previous channelPRE-CHNavigation Buttons : Selects options in a menuENTER : Confirms a menu selection.ENTERVolume : Sets sound levelVOLChannel : Selects channels in memoryCHEXIT : Removes all on-screen displays and returns to TVviewing from any menuEXITMENU : Accesses or closes main menuMENUEPG : Brings up the Program GuideEPGINFO : Shows the current station and program informationon the screenINFOCH-LIST : Shows the all channels in memoryCH-LISTAUDIO : Selects program`s audio language or analogaudio options if availableAUDIOCAPTION : Selects caption mode if availableCAPTIONASPECT : Selcets TV-Ratio if availableASPECTDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 6 mac001 1200DPI 100LPI
7PRODUCT INFORMATIONDigital-to-Analog Converter Box Remocon Code TableREMOTECONTROLFormat : M50560NO CUSTOM DATA Function1 E8H 00H 02 E8H 01H 13 E8H 02H 24 E8H 03H 35 E8H 04H 46 E8H 05H 57 E8H 06H 68 E8H 07H 79 E8H 08H 810 E8H 09H 911 E8H 0AH -12 E8H 0DH CAPTION13 E8H 0FH AUDIO14 E8H 10H MUTE15 E8H 11H ENTER16 E8H 13H VOL UP17 E8H 14H VOL DOWN18 E8H 15H STANDBY19 E8H 17H CH+20 E8H 18H CH-21 E8H 19H Right22 E8H 1AH Left23 E8H 20H PRE-CH24 E8H 21H INFO25 E8H 22H MENU26 E8H 2CH EPG27 E8H 2DH CH LIST28 E8H 2EH EXIT29 E8H 30H ASPECT30 E8H 37H Up31 E8H 38H DownDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 7 mac001 1200DPI 100LPI
8Various methods of connecting your TVMethod 1Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV. Plug this cable into the “RF IN” jack on the rear panel of the Converter Box. Connect the “RF OUT” jack on the Converter Box to the “RF IN” jack on the TV with another RFcable.Method 2 : Connecting to a TV equipped with audio/video in jacksUse the audio/video cable (Not supplied) to connect the “Video Out” jack on the Converter Box tothe “Video In” jack on your TV. Connect the “Audio Out jack on the Converter Box to the “Audio In” jack on the TV.Match the color of the cable to the color of the jack.■The default RF Output channel is Ch 4. And you can change it to Ch 3. See “Output Channel” onpage 18.CONNECTING TO A TVOutside Antenna or WallAntenna OutletRear Panel of Converter BoxRear Panel of TVMethod 1Method 2DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 8 mac001 1200DPI 100LPI
9INSTALLATION SETUPMENU OVERVIEWMovePrev.CHANNEL √OPTION √LOCK √Channel ScanChannel AddChannel EditManual ScanTypical Menu OperationIn this menu system, there are several ways to customize the menu settings provided. Most menusconsist of three levels to set up the options, but some require greater depth for the variety of settings.If you press the [MENU] button, only the first and second level of the menu system will appear onthe TV screen. The third level can be displayed by pressing [ENTER]. If a menu has more than threelevels, the pop-up dialogue box will be displayed as the fourth or fifth level. For navigating the menulevels, you will see [√] on the right side of the menu label to help you go to the next level.To show and remove the Menu:Press the [MENU] button on the Remote Control to display the menu. A second press of the [MENU]button or a press of the [EXIT] button will take you back to TV viewing.To go to the next level:Press [√] on the Remote Control.To go back to the previous level:Press [MENU] (or [œ]) on the Remote Control.1 Press [MENU].The main menu will appear.2 Use […†] to select the desired menu option.3 While the desired menu option is selected, press [√] or [ENTER] to move to the second level.4 Use […†] to select the second menu option.5 Press [√] or [ENTER] to move to the third level.Some menu options require additional steps.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.MovePrev.CHANNEL √OPTIONLOCK√Channel ScanChannel AddChannel EditManual ScanSelection(RIGHT or ENTER)leads you to theChannel Scan.ANTENNAIN RF 3/4OUTDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 9 mac001 1200DPI 100LPI
10Automatically finds all channels available through the ‘RF IN’ source. The unit stores all the activechannels found, on the channel list. Inactive or weak channels may not appear on the list. In thatcase, add missing channels manually with the Manual Scan menu.The channel list created here can be seen in the Channel Edit menu.1 Press [MENU] to display the on-screen menu.2 Select the SETUP menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the “Channel Scan” using […†] then press [ENTER] or [√] .4 Press [ENTER].The channel search process begins.You can skip the current scanning by pressing [ENTER].You can stop the process by pressing [MENU] or [EXIT].5 After the channel search is complete, the lowest channel number found appears on the TV screen.Channel ScanMovePrev.CHANNEL √OPTIONLOCK√Channel ScanChannel AddChannel EditManual ScanSelection(RIGHT or ENTER)leads you to theChannel Scan.ANTENNAIN RF 3/4OUTProcessing Channelscan...DTV Ch.12Press ENTER to stoplocal channel scan.CHANNEL MENU OPTIONSMovePrev.CHANNEL √OPTION √LOCK √Channel ScanChannel AddChannel EditManual ScanDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 10 mac001 1200DPI 100LPI
11SETUPAutomatically adds new channels available through the antennainput (RF IN) except memorized channels already in the channellist.1 Press [MENU] to display the on-screen menu.2 Select the SETUP menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the “Channel Add” using […†] then press [ENTER] or [√] .Channel Add channel search process begins.You can skip the current scanning by pressing [ENTER].You can stop the process by pressing [MENU] or [EXIT].4 After Channel Add search is complete, the lowest channel number found appears on the TV screen.MovePrev.CHANNEL √OPTIONLOCK√Channel ScanChannel AddChannel EditManual ScanSelection(RIGHT or ENTER)leads you to theChannel Add.Channel AddChannel Edit allows you to manually add or delete channels fromthe channel list in memory and create your own surf list of favoritechannels. 1 Press [MENU] to display the on-screen menu.2 Select the SETUP menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the “Channel Edit” using […†] then press [ENTER] or [√] .Channel Edit menu appears.To add or delete a channel:Press [ENTER] to add or delete the channel on the channelediting menu.4 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Controlto return to TV viewing.NotesDeleted channels can not be selected with the CH (+/–) buttons.Channel EditMovePrev.CHANNEL √OPTIONLOCK√Channel ScanChannel AddChannel EditManual ScanAntenna Channels2-14-15-1MovePrev.CHANNEL √OPTIONLOCKChannel ScanChannel AddChannel EditManual ScanAntenna Channels2-14-15-1ENTER Add/DeleteCHANNELMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 11 mac001 1200DPI 100LPI
12This feature manually adds or deletes channels.1 Press [MENU] to display the on-screen menu.2 Select the SETUP menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the “Manual Scan” using […†] then press [ENTER] or [√] .Manual Add menu appears.4 Select a channel to add or delete using […†] or the numbered buttons.5 Press [ENTER] to confirm your selection.6 Repeat steps 4-5 to add or delete additional channels with the Manual Scan menu.7 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Controlto return to TV viewing.Manual ScanMovePrev.CHANNEL √OPTIONLOCK √Channel ScanChannel AddChannel EditManual ScanSelect RF-channel number.DTV 2-1SignalBad GoodENTERAdd the channel2MovePrev.CHANNEL √OPTIONLOCKChannel ScanChannel AddChannel EditManual ScanSelect RF-channel number.DTV 2-1SignalBad GoodENTERAdd the channel2œ √CHANNELMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 12 mac001 1200DPI 100LPI
13SETUPEnables the user to set up the clock information. Normally, your clock is setusing signals transmitted by DTV stations. Choosing your time zone sets thecurrent time automatically. 1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Use […†] to select the Clock option then press [√] or[ENTER] to move to the third level.4 Use [œ √] to set Time Zone: (Hawaii, New F.land,Atlantic, Eastern, Central, Mountain, Pacific, Alaska)5 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.NotesThere are cases where the TV station does not send, or sends wrong date and/or time information causingthe Converter Box to set an incorrect time.ClockMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem InfoCurrent TImeSun, Jan 5 12:00:00 AMTime ZoneEasternMovePrev.CHANNEL √OPTION √LOCK √ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem InfoOPTION MENU FEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 13 mac001 1200DPI 100LPI
14Selects the screen format. To view a picture with a wide (16:9) aspect ratio, you can choose Set ByProgram, Letter Box, Cropped, or Squeezed. 1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Use […†] to select the Aspect Ratio option.4 Press [√] or [ENTER] to move to the third level.5 Use […†] to select an option then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.TIPWhile watching TV, you can change the picture aspect ratio using [ASPECT] on the Remote Control. Aspect RatioMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem Info✔Set By ProgramLetter BoxCroppedSqueezedOPTIONMENUFEATURESOptions to view a picture with awide (16:9) aspect ratio at 480i or480p mode output format.Use the [ASPECT] button to choose Aspect RatiosAspect Ratios available for viewing high definition contentAspect Ratio DescriptionsSet By ProgramAspect Ratio is set by program.Letter BoxUse for a picture with an original 16:9 aspect ratio (in a wide format). Letterbox mode will shrink thepicture to fill the screen, with black/gray (or blank) bars appearing at the top and bottom of thescreen.CroppedUse for a picture filling the entire screen by cropping (removing) the left and right portions of thepicture.SqueezedUse for a full picture filling the entire screen with no black/gray bars. The picture in a 16:9 formatwill be horizontally adjusted or squeezed to fit the 4:3 ratio Monitor. This setting can also be usefulwhen used with 16:9 aspect ratio monitors or with 4:3 aspect ratio Monitors that have a “16:9enhancement” feature.DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 14 mac001 1200DPI 100LPI
15SETUPSelect a language for the menus to appear in.1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the Language option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired language using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.Menu LanguageMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem Info✔EnglishEspañol (Spanish)Français (French)OPTIONMENUFEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 15 mac001 1200DPI 100LPI
16OPTIONMENUFEATURESDigital channels sometimes provide multiple audio tracks, often in a different language. You can seta default audio language with the Audio Language menu.1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the Audio Language option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired language using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.TIP• If provided by the broadcaster, you can also select a different audio language while viewing TV by pressingAUDIO repeatedly.• If multiple audio tracks are available, the audio icon appears on the program information display orProgram guide. You can select one of the other languages with the AUDIO button.Audio LanguageMovePrev.CHANNELOPTION √LOCK √ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem Info✔EnglishSpanishFrenchDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 16 mac001 1200DPI 100LPI
17SETUP1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the Caption Select option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired Caption using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.ACC (Analog Captions)Allows you to select a mode for displaying Analog Caption Data. In the Analog Caption Service,Caption 1-4 display program’s dialog, and Text 1-4 display data service information.NotesAnalog Captions will appear if they are provided by the broadcaster.OffAnalog Caption is not displayed.Caption 1Caption 1 is the primary caption service that synchronizes the captioning language with thesound, used by most broadcasters. Captioning is displayed in the same language as the program’sdialog.Caption 2Caption 2 is the special non-synchronous caption service that does not need to be in sync withthe sound and may provide simplified captioning, which is usually delayed.Caption 3Caption 3 serves as an alternate captioning service channel. Captioning is often a secondarylanguage translation such as French, Spanish, simplified English or displayed at a slower rate.Caption 4Caption 4 is another special non-synchronous caption service that does not need to be in syncwith the sound and may provide simplified captioning, usually delayed.Text 1 - 4Text 1-4 usually displays information on the lower portion of the screen and is used for a dataservice, generally not program related.TipIf available, press [CAPTION] repeatedly to select a caption language while viewing TV.NotesIf DTV and Analog Caption are received simultaneously, you can only select DTV Captions, analog captionswill not appear.Captions SelectMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem InfoACC OffDCC OffDCC Service Service 1OPTIONMENUFEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 17 mac001 1200DPI 100LPI
18DCC (DTV Captions)Selects a default Caption language.OffDTV Caption is not displayed.CustomSet DTV Captions by userStandardSet DTV Captions by programNotes• DTV Caption (Standard EIA /CEA 708) will appear only if provided by the broadcaster.• If DTV and Analog Captions are received simultaneously, you can only select DTV Caption.Tip• If available, you can also select a caption language while viewing TV, press CC repeatedly.• If captions are available, the DTV caption icon appears on the program information display, Program Guide,or Station Guide to indicate that you can select one of those caption options with the CC button. Thecaption icon will not appear on the program information display or Program Guide for analog caption.DCC Service (DTV Captions)Selects a default Caption languageSevice 1Service1 language is selected for DTV captionsSevice 2Service2 language is selected for DTV captionsSevice 3Service3 language is selected for DTV captionsSevice 4Service4 language is selected for DTV captionsSevice 5Service5 language is selected for DTV captionsSevice 6Service6 language is selected for DTV captionsOPTIONMENUFEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 18 mac001 1200DPI 100LPI
19SETUP1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the DCC View option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired setup using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.DTV Caption StyleSelects DTV Captions appearance menu options.Font SizeSelects the font size for captions.Standard: The standard text size is used for the caption display (15 pixels).Large: The large text size is used for the caption display (21 pixels).Small: The small text size is used for the caption display (11 pixels).Font TypeSelects the font type for captions.Text ColorSelects the font color for captions.Text OpacitySelects the font opacity for captions.Solid: The text is solid (without any transparency).Flash: The text blinks twice a second.Translucent: The text is translucent.Transparent: The text is transparent (In this case, whatever the color is, the color does not affectthe captions display).BG ColorSelects the background color for captions.BG OpacitySelects the background opacity for captions.Solid: The text background color is solid (without any transparency).Flash: The text background color blinks twice a second.Translucent: The text background color is translucent.Transparent: The text background color is transparent (In this case, whatever the backgroundcolor is, the color does not affect the captions.).Edge ColorSelects the edge color for captions (If the edge type is selected as None, the edge color does nothave any effect on the captions display).DCC ViewMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem InfoFont Size SmallFont Type Font 0Text Color WhiteText Opacity SolidBG Color WhiteBG Opacity SolidEdge Color WhiteEdge Type NoneOPTIONMENUFEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 19 mac001 1200DPI 100LPI
20Edge TypeSelects the edge type for captions.None: The text has no edge.Uniform: The text has a uniform edge.Raised: The text is raised.Depressed: The text is depressed.Left Shadow: The text has a left-shadow edge.Right Shadow: The text has a right-shadow edge.OPTIONMENUFEATURESUse this option to change the Converter Box’s sleep mode time.The default is 4 hours.1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the Sleep Mode option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired sleep mode using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Controlto return to TV viewing.Notes• If you have no input in selected time, the Converter Box will be turn off on selected time. • If you have selected "Off", the Converter Box is not turn off automatically.MovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem InfoOff1 hour2 hours✔4 hours8 hoursSleep ModeDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 20 mac001 1200DPI 100LPI
21SETUPUse this option to change the Converter Box’s output channel.The default is channel 4.1 Press [MENU] to display the on-screen menu.2 Select the OPTION menu using […†] then press [ENTER] or [√] to move to the second level.3 Select the Output Channel option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the desired output channel using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Controlto return to TV viewing.Output ChannelMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem Info✔Ch. 4Ch. 3You can see the firmware version.System InformationMovePrev.CHANNELOPTION √LOCK√ClockAspect RatioLanguageAudio LanguageCaption SelectDCC ViewSleep ModeOutput ChannelSystem Info Version BN202NBACIWOPTIONMENUFEATURESDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 21 mac001 1200DPI 100LPI
22Allows you to set up specific channels and ratings through blocking schemes.Also allows you to activate or disable all of the lock schemes previously set up.A password is required to gain access to the LOCK menus. If the Lock System isset to Off, the Channel and Program Ratings are not functional.1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER] or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a per-sonal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons toconfirm the personal 4-digit security password.3 Select the Lock System option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select an option (On or Off) using […†] then press [ENTER] to confirm your selection.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.Lock SystemChanges the password.1 Follow steps 1-2 as shown above (Lock System).2 Select the Set Password option using […†].3 Press [√] or [ENTER] to move to the third level.4 Enter the new 4-digit password.5 Enter the same password again.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.Set PasswordMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRT✔OffOnMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTNew * * * *Confirm * * * *MovePrev.CHANNEL √OPTION √LOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTEnter Password* – – –LOCK MENU OPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 22 mac001 1200DPI 100LPI
23SETUPBlocks any channel that you do not want to view or that you donot want your children to watch. If you tune in a blocked channel,a black screen with a pop-up box will appear. Block Ch canoverride Channel Edit menu settings (see page 20).1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER]or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a per-sonal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons toconfirm the personal 4-digit security password.3 Select the Block Channel option using […†].The channel list menu appears.To lock or unlock a channel:Use (SELECT) to block or unblock the channel on the blockchannel menu.The mark will appear to the right of the station name to indicate the blocked channel.4 Repeat step 2 to block or unblock additional channels on the channel list menu.5 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.Block ChannelMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAntenna Channels2-14-15-1MovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAntenna Channels2-14-15-1ENTER Block/UnblockMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTENTER Block/UnblockAntenna Channels2-14-15-1LOCKMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 23 mac001 1200DPI 100LPI
24Prevents children from watching certain children’s TV programs according to the ratings limit set.This rating applies only to TV programs for children. Unless you block TV programs intended formature audiences in the TV Rating – General menu, your children could view those programs.1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER]or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a personal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons to confirm the personal 4-digit securitypassword.3 Select the TV Rating-Children option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the Age or Fantasy Violence option using […†] then press [ENTER] to confirm your selection.Age : Selection applies regardless of content category of rating.Fantasy Violence : Selection applies if TV programs include rating for FantasyViolence.6 Select a rating using […†] then press [ENTER] to confirm your selection.Blocking Off : All programs with a rating are blocked.TV-Y : All Children.This program is designed to be appropriate for all children.Whether animated or live-action, the themes and elements inthis program are specifically designed for a very youngaudience, including children from ages 2 - 6. This program isnot expected to frighten younger children.TV-Y7 : Directed toward children age 7 and older.This program is designed for children age 7 and older. It may be more appropriate for childrenwho have acquired the developmental skills needed to distinguish between make-believe andreality. Themes and elements in this program may include mild fantasy violence or comedicviolence, or may frighten children under the age of 7. Therefore, parents may wish to considerthe suitability of this pro-gram for their very young children.Note: For those programs where fantasy violence may be more intense or more combative thanother programs in this category, such programs will be designated TV-Y7-FV.TV Rating-ChildrenMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeFantasy ViolenceMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeFantasy ViolenceTV-YTV-Y7Blocking OffPermits all programsMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeFantasy ViolenceTV-YTV-Y7Blocking OffChildren 7 years andolderTV-YTV-Y7Blocking OffAll Children LOCKMENUOPTIONSTV-Y7Blocking OffPermits all programsDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 24 mac001 1200DPI 100LPI
25SETUP7 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.Blocks TV programs that you or your family may not wish towatch, based on the rating scheme set.1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER]or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a personal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons toconfirm the personal 4-digit security password.3 Select the TV Rating-General option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the Age, Dialogue, Language, Sex, or Violence option using […†] then press [ENTER] to confirm your selection.Age : Selection applies regardless of content category of rating.Dialogue : Selection applies if TV programs have rating for Dialogue.Language : Selection applies if TV programs have rating for Language.Sex : Selection applies if TV programs have rating for Sex.Violence : Selection applies if TV programs have rating for Violence.6 Select a rating using […†] then press [ENTER] to confirm your selection.Blocking Off: All programs with a ratings are blocked.TV-G : General Audience.TV Rating-GeneralMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceTV-PGTV-14TV-MABlocking OffPermits all programsMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceTV-GTV-PGTV-14TV-MABlocking OffPermits all programsMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceTV-PGTV-14Blocking OffPermits all programsLOCKMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 25 mac001 1200DPI 100LPI
26Most parents would find this program suitable for all ages.Although this rating does not signify a program designedspecifically for children, most parents may let younger childrenwatch this program unattended. It contains little or noviolence, no strong language and little or no sexual dialogue orsituations.TV-PG : Parental Guidance Suggested.This program contains material that parents may find unsuitable for youngerchildren. Many parents may want to watch it with their younger children. Thetheme itself may call for parental guidance and/or the program contains one ormore of the following: moderate violence (V), some sexualsituations (S), infrequent coarse language (L), or somesuggestive dialogue (D).TV-14 : Parents Strongly Cautioned.This program contains some material that many parents wouldfind unsuitable for children under 14 years of age. Parents arestrongly urged to exercise greater care in monitoring thisprogram and are cau-tioned against letting children under theage of 14 watch unattended.This program contains one or more of the following: intense violence (V), intensesexual situations (S), strong coarse language (L), or intensely suggestive dialogue(D).TV-MA : Mature Audience Only.This program is specifically designed to be viewed by adults and there-fore may be unsuitable forchildren under 17. This program contains one or more of the following: graphic violence (V),explicit sexual activity (S), or crude indecent language (L).7 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.MovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceTV-PGTV-14TV-MABlocking OffPermits all programsMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTAgeDialogueLanguageSexViolenceTV-PGTV-14TV-MABlocking OffPermits all programsLOCKMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 26 mac001 1200DPI 100LPI
27SETUPBlocks movies according to the movie ratings restrictions sochildren cannot view certain movies. You can set the ratings toblock out all the movies with ratings above a specified level. Keepin mind that the movie ratings apply only to movies shown on TV,not TV programs such as soap operas.1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER]or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a personal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons to confirm the personal 4-digit securitypassword.3 Select the Movie Rating option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select a rating using […†] then press [ENTER] to confirm your selection.Blocking Off: All programs with a rating are blocked.G : (General Audiences) Content is not offensive to most viewers.This is a film which contains nothing in theme, language, nudity and sex, violence, etc. whichwould be offensive to parents whose younger children view the film. The G rating is not a“certificate of approval,” nor does it signify a children’s film. Some snippets of language may gobeyond polite conversation but they are common everyday expressions. No stronger words arepresent in G-rated films. The violence is at a minimum. Nudity and sex scenes are not present;nor is there any drug use content.PG : Parental Guidance Suggested. Some Material May Not Be Suitable For ChildrenThe PG rating, suggesting parental guidance, is an alert for examina-tion of a film by parentsbefore deciding on its viewing by their children. This is a film which clearly needs to beexamined or inquired into by parents before they let their children see it. The label PG plainlystates that parents may consider some material unsuitable for their children, but the parent mustmake the decision. Parents are warned against allowing their children to see PG-rated movies.The theme of a PG-rated film may itself call for parental guidance. There may be some profanityin these films. There may be some violence or brief nudity. But these elements are not deemed sointense as to require that parents be strongly cautioned beyond the suggestion of parental guid-ance. There is no drug use content in a PG-rated film.PG-13 : PG-13 Parents Strongly Cautioned. Some Material May Be Inappropriate For ChildrenUnder 13PG-13 is a sterner warning to parents to determine for themselves the attendance in particular oftheir younger children as they might consider some material not suited for them. Parents, by therating, are alerted to be very careful about viewing by their underteenage children. A PG-13 filmis one which leaps beyond the boundaries of the PG rating in theme, violence, nudity, sensuality,language, or other contents, but does not quite fit within the restricted R category. Any drug useMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTGPGPG-13RNC-17XBlocking OffGeneral audiencesMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTGPGPG-13RNC-17XBlocking OffRestrictedLOCKMENUOPTIONSMovie RatingDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 27 mac001 1200DPI 100LPI
28content will initially require at least a PG-13 rating. In effect, the PG-13 cautions parents withmore stringency than usual to give special attention to this film before they allow their 12-yearolds and younger to see it. PG-13 places larger responsibilities on parents for their children’smovie viewing. The rating system is not a surrogate parent, nor should it be. It cannot, and shouldnot, insert itself in family decisions that only parents can, and should, make. Its purpose is to giveprescreening advance informational warnings, so that parents can form their own judgments. PG-13 is designed to make these parental decisions easier for films between PG and R.R: (Restricted viewing) Not for children under age 17. Strong elements of sex and/or violence.Requires Accompanying Parent Or Adult Guardian. The film definitely contains some adultmaterial. Parents are strongly urged to find out more about the film before they allow theirchildren to see it. An R-rated film may include hard language, or tough violence, or nudity withinsensual scenes, or drug abuse or other elements, or a combination of some of the above, so thatparents are counseled, in advance, to take this advisory rating very seriously. Parents must findout more about an R-rated movie before they allow their teenagers to view it.NC-17 : (Restricted Viewing) Not for children under age 17 under any circumstances. Strongsexual content.This rating declares that this is a film that most parents will consider patently too adult for theiryoungsters under 17. No children should see the film. NC-17 does not necessarily mean“obscene or pornographic” in the oft-accepted or legal meaning of those words. The reasons forthe application of an NC-17 rating can be violence or sex or aberrational behavior or drug abuseor any other elements which, when present, most parents would consider too strong andtherefore off-limits for viewing by their children.X: (Hard Core Films) Same as NC-17 rating.6 Press [MENU] to return to the previous menu or press [EXIT] on the Remote Control to return to TV viewing.LOCKMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 28 mac001 1200DPI 100LPI
29SETUPYou can block TV program with downloadable region rating table.1 Press [MENU] to display the on-screen menu.2 Select the LOCK menu using […†] then press [ENTER]or [√] to move to the second level.If you have not entered a password yet;Key-in the “0000” password using the numbered buttons tocreate a personal 4-digit security password.If you have already entered a password;Key-in the 4-digit password using the numbered buttons toconfirm the personal 4-digit security password.3 Select the Downloadable RRT option using […†].4 Press [√] or [ENTER] to move to the third level.5 Select the Rating Value option using […†] then press[ENTER] to confirm your selection.MovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTRegion Rating TableClear Rating TableMovePrev.CHANNELOPTIONLOCK √√Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTRegion Rating TableDim0DIm1Dim2Dim3Clear Rating TableDownloadable RRTMovePrev.CHANNELOPTIONLOCK √Lock SystemSet PasswordBlock ChannelTV Rating-ChildrenTV Rating-GeneralMovie RatingDownloadable RRTDOL1DOL2DOL3DOL4DOL5DOL6DOL7DOL8DOL9DOLADOLBDOLCDOLDDOLEBlock Off AllCategorical RatingDOL0ENTER Add/DeleteLOCKMENUOPTIONSDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 29 mac001 1200DPI 100LPI
30The Channel Banner appears whenever you tune to a new channel or press the [ENTER] button onthe Remote Control while viewing a program.1 Press [ENTER] while watching a program.The Channel Banner appears on the TV screen (Channel number, audio, station name, andcurrent time).• The Channel Banner can be seen displayed on the TV screen for a moment.a. Channel NumberDisplays the current channel number.b. Station NameDisplays the station name of the current channel.c. Block InformationDisplays the block information such as No Signal, Rating Blocked, Channel Blocked, Audio Onlyor Scrambled.d. TimeDisplays the current time.2 Press [ENTER] again while the Channel Banner is displayed.The Channel Banner disappears from the TV screen.Notes• Station name and clock are displayed only if they are provided by broad-caster.• If the channel is scrambled, you may not be able to see the program.Channel Banner DisplayINFORMATION DISPLAYSabcdDWE 1004CH BLOCKEDDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 30 mac001 1200DPI 100LPI
31BASIC OPERATIONProgram Information DisplayThe Program Information Display appears if you press the [INFO] button on the Remote Controlwhile viewing a program.1 Press [INFO] while watching a program.Program Information appears on the TV screen.a. Program TitleIndicates title of current program.b. DateDisplays the current date.c. Start Time and End TimeDisplays the start time and end time for the current program.d. TimeShows current time.e. Channel NumberDisplays the current channel number.f. Station NameDisplays the station name of the current channel.g. Multiple Audio IconChannels sometimes provide multiple audio tracks, often in a different language. When multipleaudio tracks are available, the Multiple Audio Icon is displayed that you can select one of thoseother audio tracks with the AUDIO button.h. DTV Caption IconIndicates that the current program contains Digital Closed Caption Data Service.i. Wide IconIndicates that the current program is shown in wide picture format.2 Press [INFO] or [EXIT] while the Program Information is displayed.The Program Information disappears from the TV screen.NotesStation name and clock are displayed only if they are provided by the broad-caster.INFORMATIONDISPLAYSDWE 3803agibhc defDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 31 mac001 1200DPI 100LPI
32The Program and Station Guide contains schedule and program information for all channels. Theyalso provide local over-the-air channels information including conventional digital channels. Use theProgram and Station Guide to find programs easily and conveniently and to view schedule anddescriptive program information for the channels.To Display the Program or Station GuidePress the [EPG] button on your Remote Control.To Exit the Program or Station GuidePress the [EXIT] button to return to the last channel you tuned to.To Navigate through programs on the GuidesThe Program and Station Guide are operated based on a simple straightforward “Highlight andSelect” process.1. Use [œ √]on your Remote Control to navigate the guide screen.2. Press [ENTER] to select or execute the highlighted menu or function.PROGRAM AND STATION GUIDEDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 32 mac001 1200DPI 100LPI
33BASIC OPERATIONNORMAL OPERATIONYou can select channels as described below.Number and – (dash) buttons (on the Remote Control)Use Number (0-9) and – (dash) buttons to select a channel directly.[CH +/–] buttons (on the Remote Control) or […†] (on the front panel)Use [CH +/–] on the Remote Control or […†]on the front panel to cycle the Converter Boxthrough the channels in memory.Channel SelectionAdjusts the sound level for analog audio out on the HDTV Receiver. You must set Audio Variable toOn in the OPTION menu to use the Volume Adjustment.[VOL +/–] buttons (on the Remote Control) or [œ √] (on the front panel)Use [VOL +/–] on the Remote Control or [œ √]on the front panel to adjust the sound level foranalog audio out on the Converter Box.MUTE (on the Remote Control)Press [MUTE] to turn off the volume for audio out on the Converter Box.NotesBefore setting Audio Variable to Off, make sure that you have turned down the TV’s volume to theminimum. Otherwise, sudden high volume sound may cause hearing or speaker damage.Volume AdjustmentDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 33 mac001 1200DPI 100LPI
34Television System Fully ATSC CompliantChannel Coverage Terrestrial : 2 ~ 69ATSC RF input RF IN (1)RF Output 3 / 4 ChannelVideo Output 480i CompositeAudio Output Analog Audio (L/ R)Dimension (DAC-100) 180 x 150 x 30 (mm3)Weight (DAC-100) ~290 gPower Requirements AC 120V, 60HzPower Consumption In standby : 1.6WOperating : 8WAccessories RF Cable, Remote Control, BatteriesSPECIFICATIONDA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 34 mac001 1200DPI 100LPI
Model : DAC-100/DAC-200/DAC-300The CSA US mark indicates that a product meets applicable U.S.standards, including those fromANSI, ASME, ASSE, ASTM, NSF, CSA America and UL.Daewoo Electronics America Inc.LIMITED WARRANTYThis limited warranty begins on the original date of purchase, and is valid only on products purchased andused in the United States.Your DAEWOO product will be repaired or replaced, at DAEWOO's option, if itproves to be defective in material or workmanship under normal use, during the warranty period set forthbelow. This limited warranty is good only to the original purchaser of the product and effective only whenused in the United States, including Hawaii, and U.S. Territories.WARRANTY PERIOD :LABOR : 90 daysfrom the Date of Purchase.PART : 90 daysfrom the Date of Purchase.Replacement Units and Repair Parts may be new or factory remanufactured.Replacement Units and Repair Parts are warranted for the remaining portion of the original unit's warrantyperiod.HOW SERVICE IS HANDLED :The original dated bill of sale must be presented upon request as proof of purchase to DAEWOO orDAEWOO authorized service center. Shipping costs of the product to and from the service center orDAEWOO factory Service is the responsibility of the purchaser.THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUTLIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARRICULAR PURPOSE.TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THEEXPRESS WARRANTY PERIOD ABOVE.NEITHER THE MANUFACTURER NOR ITS U.S DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTALCONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE.INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PRO PROFITS, OR ANY OTHER DAMAGEWHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.Some states do not allow the exclusion or limitation of incidental or consequential damages or limitationson how an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warrantygives you specific legal rights and you may also have other rights that vary from state to state.THIS LIMITED WARRANTY DOES NOT APPLY TO :Service trips to your home to deliver, pick up, and/or install the product, instruct, or replace or correctwiring, or correction of unauthorized repairs.Damages or operating problem that result from misuse, abuse, operation outside environmentalspecifications or contrary to the requirements of precautions in the Operating Guide, accident, vermin, fire,flood, improper installation, acts of God, unauthorized modification or alteration, incorrect electricalcurrent or voltage, or commercial use, or use for other than intended purpose.The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.CUSTOMER INTERACTIVE CALL CENTER NUMBERTo obtain Customer Assistance, or Authorized Service Center location:Call 1-877-393-7823(1-877-DWESVC3)and select the appropriate option from the menu. Or visit ourwebsite : http://www.e-daewoo.comTO CONTACT DAEWOO ELECTRONICS BY MAIL:DAEWOO Customer Service300-3E State Route 17 South Lodi,NJ 07644DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 35 mac001 1200DPI 100LPI

Navigation menu