WINIA Electronics DLA32C7 32" LCD TV Monitor User Manual DLA 32C7 1of2

Download:
Mirror Download [FCC.gov]
Document ID	844627
Application ID	/PVWL4BVkP4tCGtQ4+d8kQ==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	184.28kB (2303550 bits)
Date Submitted	2007-09-18 00:00:00
Date Available	2007-09-18 00:00:00
Creation Date	2007-09-14 10:09:04
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-09-14 10:09:04
Document Title	DLA-32C7_User Manual_1of2.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C0CCC1F6C8C6

Selection of Multimedia
Input Signal
When connecting PC, STB, DVD with Multimedia
1. Pressing the "MULTIMEDIA" button on the remote controller.
• Screen changes as follows whenever pressing the “MULTIMEDIA” button.
Comp.1 => Comp.2 => HDMI => PC => Comp.1
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
PC
Comp.1
HDMI
Comp.2
Note:
• If sound signal is mono method, connect it to the L-terminal of the sound
input terminal.
31
Selection of Multimedia
Input Signal
HDMI & PC mode
1. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia
Input table.
Multimedia Input Format
Resolution
V-freq
HDMI
PC(D-Sub)
Component
Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
720 X 480i
60Hz
720 X 480p
60Hz
1280 X 720p
60Hz
1920 X 1080i
60Hz
1920 X 1080p
60Hz
640 X 480
800 X 600
1024 X 768
1280 X 768
1280 X 1024
Note :
1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution of
external devices.
2. So if this mode is used at PC mode, the screen can be enlarged.
32
Picture Adjustment
Adjustment of Aspect ratio in TV/Video/Component mode
1. Press the "SCREEN SIZE" button
• The screen changes as below whenever pressing the "SCREEN
SIZE" button.
16:9 => 4:3 => LB[16:9] => LBS[16:9] => 16:9
STILL
MUTE
SCREEN
SIZE
CH
CAPTION
ADD/
ERASE
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
4:3
16 : 9
LB(16:9)
LBS(16:9)
Note :
• 16:9
: 16:9 will display a true 16:9 (anamorphic) picture with no aspect
distortions.
• 4:3
: General TV screen currently broadcasted.
• LB(16:9)
: Enlarge vertical size of the 16:9 picture.
• LBS(16:9)
: Move the LB(16:9) picture to the upper direction.
• LB(16:9) and LBS(16:9) screen are not available in PC and HDMI mode.
• "Screen Size" function is not available in PIP mode.
33
Picture Adjustment
Adjustment of the screen in the PC mode
1. Select Picture by pressing the "Menu" button.
• The menu screen appears as follows.
PREV.CH
CH
FAV
MENU
VOL
VOL
STILL
MUTE
CH
2. Select PC Screen Mode
• Move to PC Screen Mode in the Picture menu by
pressing the ” CH ” buttons.
• Press the ” VOL ” button.
User
50
60
N.R
Off
Color temp
PC Screen Mode
Select
3. Select and adjust each items.
• Move to item what you want by pressing the ” CH ”
button.
• Adjust each items by pressing the ” VOL ” button.
PC Screen Mode
50
H. Position
V. Position
50
Phase
60
Frequency
100
Auto Set
Adjust
Note.
• You can adjust the PC menu only in the PC mode.
• During the Auto Adjust, you must not alter a screen on the monitor.
• During a moving picture, Auto Adjust is liable to incorrectly work. So you must execute Auto Adjust on a
still image.
• When Auto Adjust is not working correctly, you can adjust with H. Position, V. Position, Frequency and
Phase.
34
Picture Adjustment
When setting up various screen modes
- The user may select various screens designed for a good picture without adjusting the brightness, contrast
or color individually.
1. Picture Mode selects what you want.
• Move to Mode in the Picture menu and Select desirable mode using the
” VOL ” buttons.
• Or press the “PICTURE MODE” button, then the screen status changes as
followed: Normal => Dynamic => Cinema => User => Normal
• The screen adjustment status changes as the following screens are
displayed sequentially whenever pressing the “PICTURE MODE” button.
• The screen returns to the mode prior to turning power off when then
turning power on again.
SOURCE
SWAP
MTS S.EFFECT
P.MODE S.MODE
Dynamic
43
45
80
70
60
55
10
N.R
N.R
Off
Off
Color temp
Color temp
Adjust
Adjust
Cinema
User
50
50
60
60
50
60
N.R
N.R
Off
Color temp
Color temp
Adjust
Adjust
Note.
• Normal
• Dynamic
• Cinema
• User
Off
: For a highly defined image in a normally bright room
: For a clear-cut image emphasizing high contrast for sports viewing
: Ideal for movies
: Allows the user to customize settings as desired
35
POSITION
Picture Adjustment
When adjusting the screen to taste
- You can enjoy various screens by adjusting Brightness, Contrast, Color, Sharpness, etc to the user’s taste.
1. Select Picture by pressing the “Menu” button.
• The menu screen appears as follows.
45
70
55
2. Select and adjust each items.
• Move to the PICTURE menu.
• Whenever pressing the ” CH ” button, you can
select in order of Brightness, Contrast, Color, Tint,
Sharpness and Noise Reduction.
• You can adjust all items by pressing the ” VOL ”
buttons
N.R
Off
Color temp
Select
Note:
• Brightness : Adjust the whole of screen brighter or darker.
• Contrast : Adjust difference between brightness and darkness between objects and background on the screen.
• Color : Adjust color thinly or thickly.
• Tint : Adjust the natural tint of the image.
• Sharpness : Adjust outline of the screen smoothly or sharply.
• N . R : Reduce the noise in the picture due to poor reception or poor picture quality (Only IN TV (Analog
mode) and AV1/2 mode).
Note:
• Tint actives when receiving a NTSC signal.
• The adjusted levels are stored automatically in User mode.
Adjustment of Color Temperature in TV
- Through color temperature control, you can change the tone of color
1. Move to the Color Temp. menu with ” CH ”
buttons.
• Using the ” VOL ” buttons, select the desired Color
Temperature.
45
70
55
N.R
Off
Color temp
Note:
• Normal : Normal White
• Warm : Reddish white
• Cool : Bluish white
Adjust
36
Sound Adjustment
When selecting various sound Effects
1. Sound mode selects what you want.
• Move to Effect in the Sound menu.
• Select desirable Effect using the ” VOL ” buttons.
• Or press the “S.EFFECT” button, then the sound status changes as followed:
Off => Voice Effect => Dynamic Bass => Off
SWAP
P.MODE S.MODE
BBE
Off
Normal
Equalizer
On
Speaker
Adjust
M. Voice
Off
Off
Off
Normal
Normal
Equalizer
Equalizer
Speaker
Speaker
On
Note.
• Voice Effect
• Dynamic Bass
On
Adjust
Adjust
: Allows human voice to be heard more clearly.
: Suitable for the bass effect.
37
SOURCE
POSITION
MTS S.EFFECT
Sound Adjustment
When adjusting sound to taste
- The user can enjoy various sounds by adjusting Balance, AVC, Effect, Equalizer and Digital Volume.
1. Adjust the Balance
• Move to Balance in the Sound menu.
• Adjust the balance level by using the ” VOL ” buttons.
Off
Off
Normal
Equalizer
Speaker
On
Adjust
2. Select AVC (Auto Volume Control)
• Move to AVC in the Sound menu.
• Select either AVC On/Off using the ” VOL ”
buttons.
Off
Off
Normal
Equalizer
Speaker
On
Adjust
38
Sound Adjustment
When adjusting sound to taste
3. Sound mode selects what you want.
• Move to Mode in the Sound menu.
• Select desirable Sound mode using the ” VOL ” buttons.
• Or press the “SOUND MODE” button, then the sound status
changes as followed:
Normal => Movie => Music => News => User => Normal
SWAP
SOURCE
P.MODE S.MODE
MTS S.EFFECT
Off
Off
Normal
Equalizer
Speaker
On
Adjust
Off
Off
Off
Off
User
Movie
Equalizer
Speaker
Equalizer
On
Speaker
On
Adjust
Adjust
Off
Off
Off
Off
News
Music
Equalizer
Equalizer
Speaker
Speaker
On
On
Adjust
Adjust
Note :
• "Mode" function is available when the Effect is Off.
39
POSITION
Sound Adjustment
When adjusting sound to taste
4. Adjust the audio Equalizer
• Move to Mode in the Sound menu.
• Select User mode using the ” VOL ” buttons.
• Select and use the relevant frequency by pressing the ” CH ”
buttons.
• You can adjust the degree of the frequency by using the ” VOL ”
buttons.
Note:
• Equalizer adjustment is available in User mode.
• Equalizer: High quality sound range adjustment method used
for audio product.
100/330 Hz: Low sound range
1/1.3 kHz: Middle sound range
10 kHZ: High sound range
5. Adjust the Digital Volume (Digital TV mode only)
• Move to Digital volume in the Sound menu.
• Adjust the Digital volume level by using the ” VOL ”
buttons.
Off
Off
User
Equalizer
Speaker
On
Select
Equalizer Setting
100 Hz
330 Hz
1 kHz
3.3 kHz
10 kHz
Adjust
Off
Off
User
Equalizer
17
Digital Vol.
Speaker
On
Adjust
Note:
• Digital volume is available in DTV mode.
40
Sound Adjustment
Choosing a Multi-Channel Sound (MTS) in analog and digital
1. Mono Sound Selection (Mono/Stereo/Mono&SAP/Stereo&SAP) – Analog
TV Mode
• In Stereo reception if the stereo is weak, you can switch to MONO by
pressing the “MTS” button. Then the OSD character will be change to
“Mono”.
In Mono reception the depth of sound is improved.
• To switch back to stereo, press the “MTS” button again.
SWAP
SOURCE
P.MODE S.MODE
POSITION
MTS S.EFFECT
Note: The availability of these additional audio tracks depends on the program.
2. Audio track Selection – Digital TV Mode
• In DTV broadcast reception, you can select audio tracks
(simultaneous translations of the program into foreign
languages) by pressing the “MTS” button.
SWAP
SOURCE
P.MODE S.MODE
Note: The availability of these additional audio tracks depends on the program.
41
POSITION
MTS S.EFFECT
Features Closed Caption
Viewing Closed Caption (On-Screen Text Messages) - Analog
1. Caption mode selects what you want.
• Move to Caption in the Features menu.
• Select Caption using the ” VOL ” buttons.
Caption
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
ISM
Initialize
Select
• Select desirable Analog CC using the ” VOL ” buttons.
CC on Mute
Adjust
• The Analog CC changes as followed:
Off => CC1 => CC2 => CC3 => CC4 => TX1 => TX2 => TX3 => TX4
Note.
• The Closed Caption feature doesn’t work in Component, HDMI and PC modes
• Closed Caption: The availability of captions depends on the program being broadcast
CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that
must be in sync with the sound, preferably matched to a specific frame.
CC2 : The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the program.
CC3 : Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
CC4 : Special Non-Synchronous Use Captions. Similar to CC2.
• The Closed Caption feature doesn’t work in PIP/POP mode.
42
Features Closed Caption
Viewing Closed Caption (On-Screen Text Messages) - Digital
1. Caption mode selects what you want.
• Move to Caption in the Features menu.
• Select Caption using the ” VOL ” buttons.
Caption
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
ISM
Initialize
Select
• Select desirable Digital CC using the ” VOL ”
buttons.
• The Digital CC changes as followed:
Off => Service1~6 => CC1~4 => Off
CC on Mute
Note:
• Service 1~6 in digital caption mode may not be
available depending on the broadcast.
Adjust
Caption
Caption Style
PIP
2. Caption Style selects what you want. (In Digital TV
mode Only)
• Move to Caption Style in the Features menu.
• Select Caption Style using the ” VOL ” buttons.
Off
Background
Language
English
MGDI plus
On
Parental Control
ISM
Initialize
Select
Text Size
Text Font
• Press the ” CH ” buttons to select the desired submenu options (see options below), and then presses
the ” VOL ” buttons.
Text Font
BG Color
BG Opacity
Adjust
Note:
• The Closed Caption feature doesn’t work in PIP/POP mode.
• The digital caption feature is available only in Digital TV mode.
• The availability of captions depends on the program being broadcast.
• Default means to follow the standard set by the broadcaster.
• Text Size: This option consists of Default, Small, Standard, and Large. The default is Standard.
• Text Font: This option consists of Default, Font1~7. You can change the font you want. The default is Style 0.
• Text Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You can
change the color of the letter. The default is White.
• BG Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You can
change the background color of the caption. The default is Black.
• BG Opacity: This option consists of Default, Light, and Transparent. You can change the Background opacity of the
caption.
43
Features PIP/POP
PIP (Picture-In-Picture) / POP (Picture-Of-Picture)
1. Watching PIP/POP
• By pressing the “PIP” button on the remote controller
repeatedly, you can select one of the following settings:
SCREEN
SIZE
CH
CAPTION
44
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
SCREEN
SIZE
• If you want to change the position of sub picture, press the
“POSITION” button.
ADD/
ERASE
CH
CAPTION
ADD/
ERASE
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
Features PIP/POP
PIP (Picture-In-Picture) / POP (Picture-Of-Picture)
• If you want to swap main for sub, press the “SWAP” button.
To swap main for sub change as followed: PIP/POP table
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
MTS S.EFFECT
P.MODE S.MODE
SIZE
• If you want to change sub screen input, press the “SOURCE” button.
Sub screen change as followed: PIP/POP table
CAPTION
ADD/
ERASE
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
PIP/POP mode table.
Main\Sub
ATV
DTV
Video1
Video2
Comp.1
Comp.2
HDMI
PC
ATV
DTV
Video1
Video2
Comp.1
• POP is available only in PC mode.(PIP is not available in PC mode.)
45
Comp.2
HDMI
PC
Features Parental Control
Adjustment of Parental Control
- The Parental control feature automatically looks out programs that are deemed inappropriate for children.
- "Parental control" function is not available in PIP/POP mode.
Caption
1. Setting up your password
• Move to Parental control in the Features menu.
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
Initialize
Select
• The message “Enter password” will appear. Enter
your 4 digit password
Note:
• The default password of a new TV set is “2-2-1-1”.
Enter Password
OK
PREV.CH
CH
FAV
0~9
Adjust
Change Password
• Move to Change Password in the Parental Control
• Press the ” VOL ” buttons to change the
password.
Block
Off
Movie Rating
TV Rating
NO Rating
Unblock
Select
Enter a New Password
• The Change password screen will appear. Choose
any 4 digits for new password and enter them.
OK
PREV.CH
Note:
• If you forget the password, you must call the Service Center.
46
CH
FAV
0~9
Adjust
Features Parental Control
Adjustment of Parental Control
Change Password
2. Setting up Block
• Move to Block in the Parental Control
• Select either On or Off using ing the ” VOL ” buttons.
Block
Off
Movie Rating
TV Rating
Unblock
NO Rating
Select
Change Password
Block
Off
Movie Rating
TV Rating
Unblock
NO Rating
Adjust
3. Setting up Movie ratings
• Move to Movie ratings in the Parental Control and press
the ” VOL ” buttons.
Change Password
Block
Off
Movie Rating
TV Rating
Unblock
NO Rating
• The Movie ratings screen will appear.
Press the ” VOL ” buttons to select the MPAA categories:
G: General audience
PG: Parental guidance
PG-13: Viewers 14 and over
R: Mature audience
NC: No children under age 17
X: Adults only
NR: Not rated
• Press the “DISPLAY” button. Depending on your existing
setup, the “ “ symbol will be selected. (blank = unblocked
“ “ = Blocked)
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
Note:
• The Parental Control will automatically block any
categories that are “more restrictive”. For example, if you
block PG-13 category, then R, NC and X will automatically
be blocked also.
47
Select
Movie Rating
PG
PG13
NC
DISPLAY Select
NR
Features Parental Control
Adjustment of Parental Control
4. Setting up TV Rating
• Move to Block and select Block to On.
• Move to TV Rating in the Parental Control and press the ”
VOL ” buttons.
• The TV Rating screen will appear.
Press the ” CH ” buttons to select one of the six aged
based categories:
14: Viewers 14 and over
Y: Young children
Y7: Children 7 and over
MA: Mature audience
G: General audience
PG: Parental guidance
• Press the “DISPLAY” button. Depending on your existing
setup, the “ “ symbol will be selected. (blank =
Unblocked “ “ = Blocked)
Change Password
Block
Off
Movie Rating
TV Rating
Unblock
NO Rating
Select
TV Rating
Y7
FV
PG
14
MA
DISPLAY Select
Note:
• The Y, Y7, G, PG, 14 and MA have additional options.
FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence
• The Parental Control will automatically block certain categories that are “more restrictive”. For example, if you block “Y”
category, then Y7 will automatically be blocked. Similarly, if you block the G category, then all the categories in the “young
adult” group will be blocked (G, PG, 14, and MA). The Sub-ratings (D, L, S, and V) work together similarly.
• Select on of these TV-Ratings(Y, Y7, G, PG, 14 and MA)
and press the ” VOL ” buttons.
• Press the “DISPLAY” button to select the sub-rating.
TV Rating
Y7
FV
PG
14
MA
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
DISPLAY Select
Note:
• The Parental Control will automatically block certain categories that are “more restrictive”. For example,
if you block “L” subrating in PG, then the L sub-rating in 14 and MA will automatically be blocked
5. Setting up No Rating
• Move to No Rating in the Parental Control.
• Select either Block or Unblock using the ” VOL ”
buttons.
Note:
• The Parental Control will automatically block irregular
categories when No rating is setting.
48
Change Password
Block
Off
Movie Rating
TV Rating
NO Rating
Unblock
Adjust
Features ETC
When viewing how MGDi improves the picture.
1. Setup of MGDi plus
• Move to MGDi plus in the Features menu.
• Press the ” VOL ” buttons, and then MGDi plus mode
is On.
Caption
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
Initialize
Adjust
• Press the “MENU” buttons, and then MGDi plus mode is
Off.
Note:
• DAEWOO's new technology, MGDI plus, brings viewers more
detailed, clearer and more natural image with picture
compensation algorithm.
• MGDi plus is not available in PC and HDMI mode.
When adjusting the transparency of the menu screen
1. Setup of Menu Opacity
• Move to Background in the Features menu.
• Adjust the translucent level of OSD background using the
” VOL ” buttons.
Caption
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
Initialize
Adjust
49
Features ETC
Selection of Language
1. Select Language
• Move to Language in the Features menu.
• Select your desired language by pressing the ” VOL ”
button. Then it will be setting automatically.
• The language change as the followed:
English => Français => Español => English
50
Caption
PIP
Off
Background
Language
English
MGDI plus
On
Parental Control
Initialize
Adjust
Time Setting
Adjustment of Time
1. Setting the Clock
• Move to Clock in the Time menu.
• To go to the Clock, press the ” VOL ” buttons.
• Place the cursor to AM / PM / Hour / Min. / Month / Day
/Year. with ” VOL ” buttons.
• Set the AM / PM / Hour / Min. / Month / Day /Year.
with the ” CH ” buttons and then presses the “MENU”
button to complete.
Clock
Auto Clock
On
Off Timer
Off
Off Time
AM 12:00
Wake Timer
Off
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Eastern
Time zone
Off
DST
Adjust
2. Setup of Auto Clock
• Move to Auto Clock in the Time menu.
• Select "On / Off" using the ” VOL ” buttons.
Clock
AM 12:00
Auto Clock
On
Off Timer
Off
Off Time
AM 12:00
Wake Timer
Off
Wake Time
AM 12:00
Wake CH.
Note:
• Information of Auto Clock is required to DTV signal.
Wake Vol.
Eastern
Time zone
Off
DST
Adjust
3. Setting the Off Timer/ Off Time Setup
• Move to Off Timer in the Time menu.
• Select the Off timer to “On” using the ” VOL ” button.
• Move to Off Time with the ” CH ” buttons.
• To go to Off Time, press the ” VOL ” buttons.
• Place the cursor to AM/PM / Hour / Min. with ” VOL ”
buttons.
• Set the AM/PM / Hour / Min. with the ” CH ” buttons
and then press the “MENU” button to complete.
Clock
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
Off
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Eastern
Time zone
Off
DST
Adjust
Note:
• Confirm the Current Time is set. The Off Timer is only
available when the Current Time is set.
• The set will be turned off at selected time.
• If adjusted once, the Off Time continues to operate
everyday unless canceling setup or turn the AC power off.
Clock
AM 12:00
Auto Clock
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
Off Time
AM
Wake CH.
Off
12
00
Wake Vol.
Eastern
Time zone
Off
DST
Adjust
Off Time
51
AM 12:00
Auto Clock
AM
12
Move
00
Time Setting
Adjustment of Wake Time
4. Setting the Wake Timer / Wake Time / Wake CH / Wake
Volume
• Move to Wake Timer in the Time menu.
• Select the Wake Timer to "On" using the ” VOL ” button.
Clock
Auto Clock
AM 12:00
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Time zone
DST
Eastern
Off
Adjust
• Move to Wake Time with the ” CH ” buttons.
• To go to Wake Time, press the ” VOL ” buttons.
• Place the cursor to AM/PM / Hour / Min. with ” VOL ”
buttons.
• Set the AM/PM / Hour / Min. with the ” CH ” buttons
and then press the “MENU” button to complete.
• Move to Wake CH. in the Time menu.
• Select the Wake CH. to desirable Channel using the ” VOL ”
buttons.
Clock
Auto Clock
AM 12:00
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Time zone
DST
Eastern
Off
Adjust
Clock
Auto Clock
AM 12:00
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Time zone
DST
Eastern
Off
Adjust
• Move to Wake Vol. in the Time menu.
• Select the Wake Vol. to desirable Volume using the ” VOL ”
buttons.
Clock
Auto Clock
AM 12:00
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Time zone
DST
Eastern
Off
Adjust
Note:
• Confirm the Current Time is set. The Wake Timer is only available when the Current Time is set.
• The set will be turned on at selected time.
• If adjusted once, the Wake Time continues to operate everyday unless canceling setup or turn the AC power off.
• It is a convenient method to wake you up in the morning
52
Time Setting
Adjustment of Off Time
5. Setting the Timezone and DST
• Move to Timezone in the Time menu.
• Select the Timezone to desirable Timezone using the
VOL ” button.
• The Timezone change as the followed:
Central => Mountain => Pacific => Alaska => Hawaii =>
Newf. => Atlantic => Eastern => Central
• Move to DST in the Time menu. and select On, Off with
VOL ” buttons.
Clock
AM 12:00
Auto Clock
”
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Eastern
Time zone
Off
DST
Adjust
”
Clock
AM 12:00
Auto Clock
Note: Timezone and DST is available in Auto Clock mode
On
Off Timer
On
Off Time
AM 12:00
Wake Timer
On
Wake Time
AM 12:00
Wake CH.
Wake Vol.
Eastern
Time zone
Off
DST
6. Press the "SLEEP" button
• By pressing the “SLEEP” button on the remote controller
repeatedly, you can select one of the following settings:
Sleep Timer: Off => 15 => 30 => 60 => 90 => 120 => Off
• The set will turn off after the time you select.
Adjust
SCREEN
SIZE
Note:
• If an active signal is not present for about 30 minutes, the
set will automatically turn to Stand-by mode.
53
STILL
MUTE
CH
CAPTION
ADD/
ERASE
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
Channel Banner
Channel Banner
- The channel banner displays information about a channel number, name,
broadcasting time, audio service and more. You can see this banner by pressing
“DISPLAY” button on the Remote Control.
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
1. General Information
Channel Mode: Display the current channel mode (Air/Cable/DTV).
Channel Number: Displays the current channel number.
Channel Name: Displays the current channel name. (Digital TV mode only)
Program Name: Displays the current program name. (Digital TV mode only)
Program information: Displays the current program information. (Digital TV mode only)
Program time: Display the current / next program time (start ~ end). (Digital TV mode only)
Icon: Displays the service items (Channel State, Screen Size, Audio Service, Dolby Digital, Favorite
Channel, and ETC) in the current program.
Note: Owing to our policy of continuous improvement, the availability of icon which depends upon
the program may change.
Current time: Displays the current time.
54
Channel Banner
Electronic Program Guide (EPG) (Digital TV mode only)
- The DTV Electronic Program Guide (EPG) displays program information
about each channel, up to seven days ahead.
- You can edit your own profiles, and record programs.
- By pressing the “GUIDE” button to access EPG directly, you can see all
channels broadcasting now.
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
Note:
• The EPG channel is only available when watching DTV channels.
1. Select a desired channel
• Select a channel with the ” CH ” buttons.
• Press the “GUIDE” button and move a program with the ” CH
buttons.
• If you need detail information, press the ” VOL ” button.
”
Program Guide
12:45 pm Mon May 1
Service
14-1
10:00 am DTV Program
11:00 am DTV Program
12:00 pm DTV Program
01:00 pm DTV Program
02:00 pm DTV Program
03:00 pm DTV Program
06:00 pm DTV Program
08:00 pm DTV Program
09:00 pm DTV Program
10:00 pm DTV Program
55
[P.M. 12 : 00 ~ P.M. 01 : 00]
Troubleshooting
Symptoms and Solutions
Please check the following items before asking for repair service.
Symptom
Neither picture
nor sound
Check items
- Check the contact of sockets is all right.
- Check the TV main power is on.
Picture is OK
but no sound
- Check the Volume control is set to minimum or mute.
Sound is OK, but
no colour.
- Check the colour control and adjust it properly.
- Check the program is in colour and not in black & white.
The picture has
image.
- Check the antenna is installed correctly and if not, adjust the overlapped
antenna toward the broadcasting station.
Picture has “snow
noise”.
- Check the antenna or its connection is correct and if not, correct the
antenna fault or connection cable fault.
- Check if car traffic or neon sign disturbs the sound effect.
Stripes on
picture.
- Check the susceptible interference by other electronic devices such
as radio and television and keep magnetic or electronic devices
away from the TV.
Bad stereo or Dual
sound.
- Long distance from the station or other radio waves can generate
bad sound reception. If so, change the mode to Mono.
Remote control
does not
work.
- Check if the batteries in the Remote control are dead.
- Check if any object between IR sensor of the TV and the Remote
control does not obstruct.
POWER
MUTE
100
PREV. CH
56
Troubleshooting
In Digital TV mode
Some Problems will only occur when viewing DTV channels.
Due to the different techniques involved in digital reception, DTV signal quality can be poor even if you
appear to have a strong signal when viewing analogue programs.
The DTV system requires a good quality signal to provide the best picture. When viewing analogue
pictures, interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but
still provides a viewable picture. For the DTV system, Interference such as this can disrupt the flow of data
causing the picture to appear to be made up of large blocks, or to freeze intermittently. If the picture
disappears completely, this could mean that signal quality is very poor. If this happens often, you may need
to improve your aerial system to provide a better signal. This TV contains a complex microprocessor which
enables you to view enhanced digital services. Occasionally this device may need to be reset. This can be
done by pressing the stand-by button on your remote control or the power switch on the front panel.
SYMPTOM
No DTV Channels listed in the TV Guide after Auto Setup
Blocky interference.
Picture freezes intermittently.
CHECKS
Check that DTV transmissions are available from
the transmitter you are currently using. If not, try
directing the aerial at another local transmitter.
Check analogue transmissions. If picture quality
is poor, you will need to improve or change your
aerial system to receive DTV channels. Consult a
local installer.
Blocky interference indicates that the signal
quality is poor.
You should consider improving your aerial
system.
To check the quality of your signal use the Signal
strength (See page 29)
In PC mode
SYMPTOM
“NO SIGNAL” appears on the screen.
“Not available” appears on the screen.
Image is not clear.
Image is not centered.
CHECKS
- Check the resolution and frequency of your PC.
Then, adjust them to optimum condition for LCD TV.
- Refer to the table of PC mode input format. (If
registered resolution and Frequency on the table no
listed then no picture will be displayed.)
- Ensure that the signal cable is firmly connected to PC
and TV.
- Adjust the PHASE control.
- Run the Auto setup.
• AFTER SALES SERVICE
Do not hesitate to contact your retailer or service agent if a change in the perfomance of your product
indicates that a faulty condition may be present.
57
Standard of
Product
Model
C32HDGB
C37HDGB
C42HDGB
Screen Size
32”
37”
42”
Aspect Ratio
16:9
16:9
16:9
Resolution
1366 x 768 (WXGA)
1366 x 768 (WXGA)
1366 x 768 (WXGA)
Pixel Pitch
170.25 x 510.75 x RGB 0.200 x 0.600 mm x RGB
0.227 x 0.681mm x RGB
Contrast Ratio
3000:1
3000:1
3000:1
Dimension(W x H x D)
Set Dimension
806 x 626.5 x 230mm
940 x 720 x 328.5mm
1060 x 823 x 328mm
Power Consumption
Max.
120W
150W
200W
LCD Panel
TV System
NTSC, ATSC
Power Source
120V~, 60Hz
Owing to our policy of continuous improvement, specifications may change.
58
Limited
Warranty
Daewoo Electronics America Inc. warrants this product to be free from defects in material and
workmanship and agrees to remedy any such defect.
This warranty covers 1 year labor and 1 year parts from the date of original purchase.
This warranty applies only to product purchased from authorized DEAM dealer and used within the
boundaries of U.S.A.
This warranty does not apply to product that has been improperly installed, subjected to usage for
which the product was not designed, misused or abused, damaged during transportation, or which has
been altered or repaired in any way that affects the reliability or detracts from its performance.
How you get warranty service
Warranty service can only be provided by an authorized DEAM service center. For the closest
authorized service center to you, please contact your Dealer. In order to receive warranty service you
must provide the authorized service center with a copy of proof of purchase, signifying the date of
purchase and the name of the Dealer from whom you purchased the product.
Statutory warranties
The purchase may have rights under existing provincial or federal laws, and where any terms of this
warranty are prohibited by such laws, they are deemed null and void, but the remainder of the
warranty shall remain in effect.
If you require further assistance, please call:
1-877-393-7823(1-877-DWESVC3)
www.e-daewoo.com
59
P/N : 48586900E100-R0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:09:14 10:09:04+09:00
Modify Date                     : 2007:09:14 10:09:04+09:00
Page Count                      : 30
Creation Date                   : 2007:09:14 01:09:04Z
Mod Date                        : 2007:09:14 01:09:04Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 
Metadata Date                   : 2007:09:14 01:09:04Z
Creator                         : 
Title                           : DLA-32C7_User Manual_1of2.pdf

EXIF Metadata provided by EXIF.tools