WINIA Electronics DLA37C7 37" LCD TV Monitor User Manual DLA 32C7 2of2

Dongbu Daewoo Electronics Corporation 37" LCD TV Monitor DLA 32C7 2of2

Contents

Manual 1

Download: WINIA Electronics DLA37C7 37" LCD TV Monitor User Manual DLA 32C7  2of2
Mirror Download [FCC.gov]WINIA Electronics DLA37C7 37" LCD TV Monitor User Manual DLA 32C7  2of2
Document ID844636
Application IDQR+51MzhhZVBwP+/ynkTOw==
Document DescriptionManual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize190.17kB (2377125 bits)
Date Submitted2007-09-18 00:00:00
Date Available2007-09-18 00:00:00
Creation Date2007-09-14 10:07:27
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2007-09-14 10:07:27
Document TitleDLA-32C7_User Manual_2of2.pdf
Document CreatorPScript5.dll Version 5.2.2
Document Author: C0CCC1F6C8C6

LCD TELEVISION
INSTRUCTION MANUAL
C32HDGB
C37HDGB
C42HDGB
Proper use guarantees
product life.
Before using the product, be advised
that you read this owner’s manual well
and try to operate it.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING : TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Caution
FCC RF IINTERFERENCE STATEMENT
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult authorized service centers for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment,
Important
Safeguards
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions
Read all safety and operating instructions before operating the TV. Retain them safely
for future reference. Follow all operations and instructions accordingly.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners.
Cleaners can permanently damage the cabinet and screen. Use a lightly dampened cloth for
cleaning.
4. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions
may result in the risk of fire, electric shock or other personal injury.
5. Water and Moisture
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can
cause the TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a
cart, stand, bracket or table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to
protect it from overheating. Do not cover the ventilations openings in the cabinet and never place the set in a confined
space such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug. A warning that an apparatus with CLASS I construction
shall be connected to a MAINS socket outlet with a protective earthing connection.
10. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, wall outlets, and the point
where they exit from the TV. MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
11. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power-line surges.
Important
Safeguards
13. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
14. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or
short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
16. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Section 810 of the National Electric Code, ANSI /NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
17. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
20. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to
determine that the TV is in safe operating condition.
21. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
In case of an accident, please unplug the unit from the outlet immediately.
To reduce the risk of electric shock, do not
remove cover or back. No user -serviceable
parts inside. Refer to qualified service
personnel for repair.
Do not put any object that contains water such as flowerpot - near to the unit.
The water may penetrate into the unit, and be
a cause of fire or hazardous electric shock.
To prevent fire and damages to the product,
unplug the unit from the outlet during lightning
storm, or when it is left unattended and unused
for a long period of time.
Do not put on or use the product near water and
moisture-such as in a bathroom, washbowl, etc.
It may be a cause of fire and electric shock
hazards.
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the
product. Never put in any item-such as a coin,
paper, match- through these openings since it
may touch dangerous voltage points that could
result in fire or shock hazard.
Do not let children hang on or climb on the
product since it may be a cause of serious
injury.
Hold the plug when unplugging the unit
from the outlet. The cord may cause fire or
electric shock if damaged.
Do not cause the product to lean or put it in an
unstable place since it may cause a serious
injury to a person, as well as damage to the
product if it falls.
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
Please keep the user's manual in a safe place for future reference.
Do not put volatile substance-such as
benzene, naphtha- near the product since it
may cause a change in the product's colour.
Do not spill water or drop the remote
controller since it may be a cause of
malfunctioning.
Do not view the TV too closely since it may
cause damage in your eyesight.
Refer servicing to qualified service
personnel for cleaning at least once a year
since dust inside the TV set may be a result
or fire and malfunctioning of the product.
Do not cover the top of the television set.
Ventilation will be prevented, and it may be
a cause of fire if the product is internally
overheated.
The product should be situated away from
any heat source-such as radiators, heat
registers, stoves, or other products that
produce heat.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Please be advised of electric wires and cables when installing
the antenna. It may be a cause of hazardous electric shock and
fire if the antenna touches or falls on the electric wire; thus, it
must be installed firmly, and far away from the cables.
Unplug the power from the outlet and all the related
connections from the unit to prevent electric shock. At least
two people must work together to move the TV set when
transporting to prevent the TV from falling, and
consequently, any serious injury or damage.
Do not touch the power cord with
moisturized or wet hands when plugging to
or unplugging from the outlet since it may be
a cause of electric shock.
Do not expose the product to a dusty or
moisturized place since it may be a cause of
malfunctioning.
Table of
Contents
Installation and Maintenance
Antenna Connection
Video Connection
Camcorder & Video Game Connection
DVD Player Connection
STB(Set Top Box) Connection
PC Connection
Cable TV Broadcasting Connection
Connect with the Dolby Digital AMP
Name of Each Part
Basic Guide
Parts of the Remote Controller
Method To Use Basic Menu
To Watch TV
Setting Up TV Stations
Selection of TV/VIDEO Input Signal
Selection Multimedia Input Signal
Application Guide
Picture Adjustment
Sound Adjustment
Features - Closed Caption
Features - PIP/POP
Features - Parental Control
Features - ETC
Time Setting
Channel Banner
Troubleshooting
Standard of Product
12
13
14
15
16
18
19
20
22
24
25
27
30
31
33
37
42
44
46
49
51
54
56
58
Supplied
Accessories
Make sure that the following accessories are provided with the product.
PO
DIS
PL
WE
AY
MUL
TV/
GU
TIM
EDI
EO
VID
IDE
EN
TER
FAV
CH
AC cord
EV.
PR
CH
VOL
ME
NU
STI
LL
VOL
TE
MU
CH
EEN
SCR E
SIZ
TIO
CAP
ADD SE
ERA
SLE
EP
PIP
CH
PIP
PIP
PO
CH
SO
SW
UR
ION
SIT
CE
AP
UN
SO
E MODE
TUR
PIC DE
MO
AC cord
Instruction manual
Batteries
Cable holder
MT
UN
SO ECT
EFF
Remote controller
The method of wire arrangement
1. Assemble the cable holder enclosed on the back
of TV. (PICTURE 1)
(ASSEMBLY METHOD: After you push the
"A"(prominence part of cable holder) in the
hole, rotate the cable holder clockwise as an
angle of 90°. You can separate in reverse order
of assembly.)
2. Open the cable holder. (PICTURE 2)
( you can open the cable holder then press and
push "B" part.)
3. After arranging cables with the cable holder,
lock "B" again. (PICTURE 3)
Antenna
Connection
Indoor Antenna Connection
1. Connect the feeder cable of the antenna to the combining adapter.
WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong
antenna connection. Be sure to check its direction and place when
installing.
Combining adapter
2. Connect the combining adapter to the antenna input at the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest
Service Center.
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Antenna Input
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Antenna
Connection
Antenna Connection
Such community TV Antenna installation may be found in most of co-op apartments.
When a coaxial cable is used : Plug the coaxial cable to the antenna socket on the wall.
Antenna socket at the back of the TV set
ANT
When a feeder cable is used : Plug the coaxial cable to the antenna socket on the wall.
Antenna socket at the back of the TV set
ANT
Combining adapter
10
Antenna
Connection
Outdoor Antenna Connection
Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses
Single Antenna Connection
VHF Antenna
REAR OF THE TV SET
UHF Antenna
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
ANT
Separate Antenna Connection.
ANT
11
Video
Connection
Connecting with an External Source
You may connect S-Video 1(Rear of the TV) or S-Video 2(Side) input to enjoy clearer and brighter picture
images. You can make the connection with the AV1 or AV2 input.
REAR AND SIDE OF THE TV SET
DIGITAL
AUDIO
MONITOR OUT
VIDEO
S-VIDEO 1
L-AUDIO-R
AV 1
VIDEO S-VIDEO
OPTICAL
SERVICE INPUT
R-AUDIO-L
INPUT
AUDIO
HDMI
L-AUDIO-R
COMPONENT
VIDEO
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
12
Camcorder & Video
Game Connection
Watching the Camcorder Recording or Video Game on TV
1. Prepare the S-video and RCA connector.
2. These connectors connect to Video1/2 or S-Video1/2 like below the picture.
3. Turn on the TV set and camcorder/video game.
4. Select Video1/2 or S-video1/2, using the “TV/VIDEO” of the Remote controller or “TV/VIDEO” button
of the TV set.
REAR AND SIDE OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
L-AUDIO-R
AV 1 INPUT
Pb/Cb
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
13
DVD player
connection
When connecting with a component cable
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
L-AUDIO-R
Pr/Cr
COMPONENT INPUT
Note : When you connect with the component, please check the color of cable between DVD and TV set.
When connecting with a S-VHS cable and RCA cable
REAR AND SIDE OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
14
STB(Set Top Box)
Connection
When connecting with a HDMI cable
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
L-AUDIO-R
Pr/Cr
COMPONENT INPUT
When connecting with a component cable
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Set Top Box
15
PC
Connection
When connecting with PC(D-Sub) cable.
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect between PC and TV set using the D-Sub and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Select PC mode by pressing “MULTIMEDIA” button on the remote control or “TV/VIDEO” button of the
TV set.
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
When connecting with a HDMI cable.
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect between PC and TV set using the HDMI and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Select HDMI mode by pressing “MULTIMEDIA” button on the remote control or “TV/VIDEO” button of
the TV set.
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
L-AUDIO-R
AV 1 INPUT
Pb/Cb
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Note : If the graphic card of the PC only support DVI signal, you must connect the Audio cable like above the picture.
16
PC
Connection
PC CONNECTION NOTES:
1) If there is a [Vertical Frequency] setting menu in the [Screen] Menu of the PC, adjust the frequency to 60Hz.
2) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution.
3) HDMI input port receives only Digital Signal.
4) Depending on the graphic card when you plug & unplug the HDMI connection, the screen may not display
correctly.
Restart the computer if this happens.
Multi input resolution available in LCD TV.
Resolution
V-freq
HDMI
PC(D-Sub)
Component
Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
60Hz
VESA Standard
75Hz
VESA Standard
720 X 480i
60Hz
720 X 480p
60Hz
1280 X 720p
60Hz
1920 X 1080i
60Hz
1920 X 1080p
60Hz
640 X 480
800 X 600
1024 X 768
1280 X 768
1280 X 1024
Note :
1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution of
external devices.
2. So if this mode is used at PC mode, the screen can be enlarged.
17
Cable TV
Broadcasting
Connection
External Input Connection Source
Watching cable television is only possible after you have subscribed to the local broadcasting company
and installed a cable receiver. You may make the connection to either the Component input, Video1 input
or Video2 input.
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Antenna Input Connection
Watching cable television is only possible after you have subscribed to the local broadcasting company and
installed a cable receiver.
18
Connect with the
Dolby Digital AMP.
If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
REAR OF THE TV SET
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
Optical output
Dolby Digital AMP
Woofer
Center
Surround L
Surround R
19
Name of
Each Part
Front Panel and Side
Buttons on the TV set have the same functions as those of the remote controller.
TV/VIDEO
MENU
VOL
CH
POWER
Control Key Buttons.
TV/VIDEO Buttons : Each time you press this button, the TV will cycle through:
TV Video1(S-Video1) Video2(S-Video2) COMPONENT1 COMPONENT2 HDMI PC
MENU Button : Use this button to enter and exit the MENU.
VOL Buttons : Use this buttons to change your TV’s volume or to move the cursor in the menu.
CH Buttons : Use this buttons to change channels on your TV or to move the cursor in the menu.
POWER Button : Use this button to TV STAND-BY mode/TV ON mode.
Remote controller signal receiver
The screen contains the remote controller signal receiving window; therefore, point the remote
controller towards the screen when using it.
Stand-by 
LED RED - Standby
LED BLUE - SET ON
20
Name of
Each Part
Rear of the TV set
INPUT
PC AUDIO
HDMI
SERVICE
DIGITAL AUDIO
OPTICAL
OUTPUT
MONITOR OUT
VIDEO
S-VIDEO
Pb/Cb
L-AUDIO-R
AV 1 INPUT
Pr/Cr
L-AUDIO-R
COMPONENT INPUT
REAR OF THE TV SET
21
Parts of the Remote
Controller
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
OK
PREV.CH
CH
FAV
11
13
MENU
VOL
VOL
MUTE
10
15
16
14
STILL
12
SCREEN
SIZE
PIP CH
CH
CAPTION
ADD/
ERASE
PIP
SLEEP
PIP CH
18
17
19
SWAP
SOURCE
POSITION
21
20
23
22
24
25
P.MODE S.MODE
MTS S.EFFECT
27
26
1. DISPLAY: Display the present modes (ATV/DTV, Video1/2,
COMP.1/2, HDMI and PC) and signal information.
Note: In Analog TV mode, you can see information about the
Channel number, Sound, and Clock. In Digital TV mode,
you can see information about a channel number, name,
broadcasting time and more.
2. (POWER): Turns the TV on and off.
3. GUIDE: Access Electronic Program Guide (EPG). It works
only in DTV mode.
4. TV/VIDEO: Each time you press this button, the TV will cycle
Through: TV AV1/2(S-Video1/2) TV
5. MULTIMEDIA: Each time you press this button, the TV will
cycle Through: Comp.1/2 HDMI PC
Comp. 1/2
6. NUMBER: Press the numbers on this board; you can select
CH directly in TV mode. (EX: When you want to
select CH10, you should press down “1” and “0”
within 2second. If you only press down “1”, after
2second, CH1 will be selected.)
7.
(DASH) : Used to enter a program number for multiple
program channels such as 2-1, 2-2, etc.
8. OK: Confirms a selection.
9. PREV CH: Press this button, you can tune to the previous
channel.
10.
(MUTE): Press this button, and the sound goes off. Press
again, and the sound returns.
11. FAV : Press to switch to your favorite channels.
12. STILL : Press this button to freeze the picture.
13. VCHW: Press to switch to your memorized channels in
sequence.
14. CVOLB: Adjust the volume.
15. SCREEN SIZE: Select screen aspect ratio. 16:9 4:3
LB[16:9] LBS[16:9)
Note: When current mode is multimedia (PC and HDMI), the
aspect only work as the 16:9 or 4:3 mode. And "Screen
Size" function is not available in PIP mode.
16. CAPTION: Controls the caption decoder.
22
Parts of the remote
controller
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
OK
PREV.CH
CH
FAV
11
13
MENU
VOL
VOL
STILL
MUTE
10
15
16
14
12
SCREEN
SIZE
CH
CAPTION
ADD/
ERASE
PIP CH
PIP
SWAP
SOURCE
SLEEP
PIP CH
18
17
19
POSITION
21
20
23
22
24
25
P.MODE S.MODE
MTS S.EFFECT
27
26
17. ADD/DEL: Use to add or delete channels to/from
memory.
18. SLEEP: Sleep Timer setting.
30min 60min 90min
SLEEP TIMER: Off 15min
120min OFF
Note: If an active signal is not present for about 30 minutes,
the set will automatically turn to ST-BY mode.
19. CCHB: Displays the available channels in sequence.
20. PIP: Select either PIP / POP On or Off.
21. SWAP: Swap the main screen for sub screen.
22. SOURCE: Sub Screen input mode change as follows PIP
table mode or POP table mode.
23. POSITION: Move the sub window position in PIP mode.
Position: right bottom left bottom left top right top
24. P. MODE: Picture modes change as follows:
Normal
Normal Dynamic Cinema User
25. S.MODE : Using this button, Select the desired sound
mode.
Normal Movie Music News User Normal
Note: SOUND MODE can be selected only SOUND EFFECT is off.
26. MTS: In Analog, you can select sound mode
(Mono/Stereo/SAP). In Digital, you can select
audio tracks (English/Spanish/French).
Note: The availability of audio track depends upon the program.
27. S.EFFECT: Using this button, Select the desired sound
effect.
Off VOICE EFFECT DYNAMIC BASS Off
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control handset over
and open the battery compartment. Insert the batteries (Two
1.5v, type AAA). Make sure that the polarity matches with
the (+) and (-) marks inside of the battery compartment.
Note: To avoid damage from possible battery leakage, remove
the batteries if you do not plan to use the remote control
handset for an extended period of time.
23
Method To Use
Basic Menu
Basic Menu
- The basic menu appears on the screen if you press the menu button of the remote control.
- There are 5 items Picture, Sound, Channel, Features, and Time in the basic menu.
- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed
upward.
1. Press the "MENU" button.
• The main menu appears if you press the “MENU” button.
45
70
55
N.R
Off
Color temp
Select
2. Press the ” CH ” button.
• You may setup according to the directions on the
screen after selecting the desired item by pressing the
” CH ” button.
• If the setup is completed, exit from the menu by
pressing the “MENU” button.
45
70
55
N.R
Off
Color temp
Select
Adjusts Picture Mode
- Mode(Normal, Dynamic, Cinema, User), Brightness, Contrast, Color, Tint (NTSC
only), Sharpness, Noise Reduction, and Color Temp.
Adjusts Sound Mode
- Balance, Effect(Off/Voice Effect/Dynamic Bass), AVC, Mode (Normal/ Movie /
Music / News / User), Equalizer, Digital Vol. and Speaker
Adjusts Channel Mode
- Auto Search, Antenna (Air / Cable), Fine Tune, Favorite Channel Edit, Strength
Adjusts Feature Mode
- Caption, Caption Style, PIP, Background, Language, MGDI plus, Parental
Control, and Initialize.
Adjusts Time Mode
- Clock, Auto Clock, Off timer, Off time, Wake Timer, Wake Time, Wake CH,
Wake Vol, Time zone, DST
24
To Watch TV
On/Off, Number, — , Enter, Mute, Display,
VOL ,
CH
- Buttons with same name in the main body performs the same function.
Press the “POWER” button on TV set or
Remote controller.
When pressing the Digit Key button
• Press the "ENTER" button if using the number button for
channel selection. For example, to watch the No.9 channel,
Press the number button "9" and the "ENTER" button. If
pressing only number “9” button, it takes a longer time to
select the channel.
• To watch the No.9-1 channel, Press the button "9", " ", "1"
and "ENTER" in sequence.
GUIDE
TV/VIDEO
MULTIMEDIA
• Press the “MUTE”( ) button.
• No sound is heard if “MUTE( )” is displayed on the screen.
• Sound is heard again if you press the “MUTE( )” button
once again.
For example, please use this button when telephone rings or
when guest comes while watching TV.
PREV.CH
CH
• Pressing the “DISPLAY” button, the status of channel or
clock broadcasting being currently watched or entry
status of video component is displayed on the screen.
25
FAV
MENU
VOL
VOL
STILL
MUTE
CH
CAPTION
ADD/
ERASE
SLEEP
PIP CH
PIP
PIP CH
SWAP
SOURCE
POSITION
P.MODE S.MODE
Check of TV operation status
OK
SCREEN
SIZE
To suddenly turn sound off
POWER
DISPLAY
Note:
• The buttons of the remote control and the main body
operate only when AC power turn on.
• You must pull out the plug of TV set to shut off the AC
Power
MTS S.EFFECT
To Watch TV
1. Press the “POWER” button on TV set or remote
controller.
• The Stand-by LED lamp turns on in red color.
• Press the “POWER” button on the TV set or remote
controller.
• The Stand By LED lamp on the front panel begins to fliker
in blue color and the TV turns on.
2. Press the “ CH ” button.
• Select the desired program by pressing the ” CH
button or the number buttons.
”
Air
26
3. Adjust volume.
• Sound reduces by pressing the “ VOL” button.
• Sound increases by pressing the “VOL ” button.
Note : Sound mutes by pressing the “MUTE”(
) button.
30
4.Press the “POWER” button of right side of the set or
Remote controller for turning the TV off.
• TV turns off and the power lamp changes to red color.
26
Setting Up TV
Stations
Auto Search to find Channels
- All stations that can be received are stored by this method. It is recommended that you use Auto tuning during
installation of this set.
1. Press the “MENU” button to select the Channel menu.
• Move the selection bar to the Channel menu with
” CH ” buttons.
Picture
Antenna
Sound
Channel
Favorite Channel Edit
Feature
Time
2. Select the “Antenna”
• Place the selection bar on Antenna and select Air,
Cable with “ VOL ” buttons.
Antenna
Favorite Channel Edit
Adjust
3. Select the "Auto Search".
• Place the selection bar on Auto Search and press the
“ VOL ” button.
4. Press wait until the Channel menu appears.
Antenna
Favorite Channel Edit
Auto Searching...
Air
26
27 %
27
Setting Up TV
Stations
Fine tune
1. Searching for channel finely
• Select a Channel number you want to tune finely with
the ” CH ” buttons.
• Press the “MENU” button and move to the Channel
menu.
• Move the selection bar to the Fine tune with ” CH ”
buttons.
• Press the “CVOLB“ buttons to adjust the fine tuning.
Antenna
Favorite Channel Edit
Adjust
Note:
• If you are unable to get a good picture or Sound because of a poor broadcasting signal,
adjustment of Frequency might improve it.
Channel Add/Delete
1. Adding the Channel
• Select a Channel number you want to add with the
“NUNBER” buttons.
• Press the “ADD/ERASE” button to add the channel
• Move the selection box to the Yes and press the
“ADD/ERASE” button again.
2. Deleting the Channel
• Select a Channel number you want to delete
• Press the “ADD/ERASE” button to delete the
channel
• Move the selection box to the Yes and press the
“ADD/ERASE” button again.
Do you want to add this channel ?
Analog Air
22
ADD/ERASE
Do you want to erase this channel ?
Analog Air
28
22
ADD/ERASE
Setting Up TV
Stations
Favorite Channel Edit
1. Locate the selection bar on the Favorite Channel Edit.
• Move to Favorite Channel Edit in the Channel menu.
• Press the “ VOL ” buttons.
Antenna
Favorite Channel Edit
2. Add the Favorites Channel
• Move the selection bar to the Current Channel with
” CH ” buttons.
• Select a Channel number you want to add in Favorites
Channel List with the “ VOL ” buttons.
• Add the Channel with “DISPLAY” button.
Analog Air
22
Clear
: Move
: Exit
3. Delete the Favorites Channel
• Move a Favorite Channel you want to delete in
Favorites Channel List with the ” CH / VOL ”
buttons.
• Delete the Favorite Channel with “DISPLAY” button.
DISPLAY : Add/Erase
Analog Air
22
22
Clear
: Move
: Exit
DISPLAY : Erase
4. Viewing the Favorite CH
• Whenever pressing "FAV" button, the Channel
changes as the selected Channel order.
Signal Strength(Digital TV mode only)
- Reveals how strong your DTV signal is and whether you need to adjust your antenna.
- The higher the signal strength, the less likely you are to experience picture degradation.
- Digital TV Signals; May not be available in all areas, nor broadcast all channels.
1. Locate the selection bar on the strength.
• Move to strength in the Channel menu.
• Display the strength status of digital signal.
Antenna
Favorite Channel Edit
Strength
14-1(16)
Strong
29
Selection of TV/VIDEO
Input Signal
When watching video, Camcorder, DVD, Cable TV with External Input
- When pressing TV/VIDEO button on the remote controller screen changes as follows:
TV => AV1(S-Video1) => AV2(S-Video2) => TV
1. Press the “TV/VIDEO” button on the remote controller.
• Screen changes as follows whenever pressing the “TV/VIDEO” button.
TV => AV1(S-Video1) => AV2(S-Video2) => TV
Air
POWER
DISPLAY
GUIDE
TV/VIDEO
MULTIMEDIA
AV1
26
AV2
Note:
• If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
• If sound signal is mono method, connect it to the L-terminal of the sound input terminal.
30

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:09:14 10:07:27+09:00
Modify Date                     : 2007:09:14 10:07:27+09:00
Page Count                      : 31
Creation Date                   : 2007:09:14 01:07:27Z
Mod Date                        : 2007:09:14 01:07:27Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : 
Metadata Date                   : 2007:09:14 01:07:27Z
Creator                         : 
Title                           : DLA-32C7_User Manual_2of2.pdf
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5FDLA37C7

Navigation menu