WINIA Electronics LA37L1 37" LCD Monitor User Manual S00E102 MANUAL

Dongbu Daewoo Electronics Corporation 37" LCD Monitor S00E102 MANUAL

Contents

User manual 1 of 2

Download: WINIA Electronics LA37L1 37" LCD Monitor User Manual S00E102 MANUAL
Mirror Download [FCC.gov]WINIA Electronics LA37L1 37" LCD Monitor User Manual S00E102 MANUAL
Document ID996636
Application ID+TYrzkrKogprSKRcDAyS1Q==
Document DescriptionUser manual 1 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize216.87kB (2710819 bits)
Date Submitted2008-09-07 00:00:00
Date Available2008-09-07 00:00:00
Creation Date2008-07-04 16:07:33
Producing SoftwareAcrobat Distiller 7.0.5 for Macintosh
Document Lastmod2008-09-04 15:41:04
Document TitleS00E102 MANUAL
Document CreatorQuarkXPress3.3k: LaserWriter 8 KH-8.7.3
Document Author: ¥Î

LCD TELEVISION
INSTRUCTION MANUAL
C32HDHB
C37HDHB
C42HDHB
C42FHDHB
Proper use guarantees
product life.
Before using the product, be advised
that you read this owner’s manual well
and try to operate it.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING : TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Caution
FCC RF INTERFERENCE STATEMENT
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult authorized service centers for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment,
IMPORTANT SAFETY
INSTRUCTIONS
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
1.
2.
3.
4.
5.
6.
7.
8.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. DISCONNECTING DEVICE FROM MAINS - Main plug is the disconnecting device. The plug
must remain readily operable.
IMPORTANT SAFETY
INSTRUCTIONS
16. Wall or Ceiling Mounting
When mounting the product on a wall or ceiling, be sure to install the product using the
designated mounting tool according to the method recommended by the manufacturer.
17. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions
may result in the risk of fire, electric shock or other personal injury.
18. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult your appliance dealer or local power
company.
19. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
20. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
21. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage
points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or
into the TV.
22. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Section 810 of the National Electric Code, ANSI /NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
23. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks
to determine that the TV is in safe operating condition.
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
In case of an accident, please unplug the unit from the outlet immediately.
To reduce the risk of electric shock, do not
remove cover or back. No user -serviceable
parts inside. Refer to qualified service
personnel for repair.
Do not put any object that contains water such as flowerpot - near to the unit.
The water may penetrate into the unit, and be
a cause of fire or hazardous electric shock.
To prevent fire and damages to the product,
unplug the unit from the outlet during lightning
storm, or when it is left unattended and unused
for a long period of time.
Do not put on or use the product near water and
moisture-such as in a bathroom, washbowl, etc.
It may be a cause of fire and electric shock
hazards.
Slots and openings in the case are provided for
ventilation to ensure reliable operation of the
product. Never put in any item-such as a coin,
paper, match- through these openings since it
may touch dangerous voltage points that could
result in fire or shock hazard.
Do not let children hang on or climb on the
product since it may be a cause of serious
injury.
Hold the plug when unplugging the unit
from the outlet. The cord may cause fire or
electric shock if damaged.
Do not cause the product to lean or put it in an
unstable place since it may cause a serious
injury to a person, as well as damage to the
product if it falls.
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user's own safety, and the proper operation of the product.
Please keep the user's manual in a safe place for future reference.
Do not put volatile substance-such as
benzene, naphtha- near the product since it
may cause a change in the product's color.
Do not spill water or drop the remote control
since it may be a cause of malfunctioning.
Do not view the TV too closely since it may
cause damage in your eyesight.
Refer servicing to qualified service
personnel for cleaning at least once a year
since dust inside the TV set may be a result
or fire and malfunctioning of the product.
Do not cover the top of the television set.
Ventilation will be prevented, and it may be
a cause of fire if the product is internally
overheated.
The product should be situated away from
any heat source-such as radiators, heat
registers, stoves, or other products that
produce heat.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Please be advised of electric wires and cables when installing
the antenna. It may be a cause of hazardous electric shock and
fire if the antenna touches or falls on the electric wire; thus, it
must be installed firmly, and far away from the cables.
Unplug the power from the outlet and all the related
connections from the unit to prevent electric shock. At least
two people must work together to move the TV set when
transporting to prevent the TV from falling, and
consequently, any serious injury or damage.
Do not touch the power cord with
moisturized or wet hands when plugging to
or unplugging from the outlet since it may be
a cause of electric shock.
Do not expose the product to a dusty or
moisturized place since it may be a cause of
malfunctioning.
Table of
Contents
Installation and Maintenance
Stand Construction
Antenna Connection
Video Connection
Camcorder & Video Game Connection
DVD Player Connection
STB(Set Top Box) Connection
PC Connection
USB Connection
Cable TV Broadcasting Connection
Connect with the Dolby Digital AMP
Name of Each Part
Basic Guide
Functionsa of the Remote Control
Method To Use Basic Menu
To Watch TV
Setting Up TV Stations
Selection of TV/VIDEO Input Signal
Selection of Multimedia Input Signal
Selection of Media(USB) Input Signal
Application Guide
Picture Adjustment
Sound Adjustment
Features - Closed Caption
Features - Parental Control
Features - ETC
Time Setting
Channel Banner
Troubleshooting
Standard of Product
11
14
15
16
17
18
20
21
22
23
25
27
28
30
34
35
37
38
42
46
48
53
54
57
59
61
Supplied
Accessories
Make sure that the following accessories are provided with the product.
AC cord
AC cord
Instruction manual
Batteries
Cable holder
Remote control
Cover Bottom
-When installing wall mount, set the cover
bottom as shown above
Wall Mounting Unit
(OPTIONAL)
The method of wire arrangement
1. Assemble the cable holder enclosed on the back
of TV. (PICTURE 1)
(ASSEMBLY METHOD: After you push the
"A"(prominence part of cable holder) in the
hole, rotate the cable holder clockwise as an
angle of 90°. You can separate in reverse order
of assembly.)
2. Open the cable holder. (PICTURE 2)
( you can open the cable holder then press and
push "B" part.)
3. After arranging cables with the cable holder,
lock "B" again. (PICTURE 3)
Stand
Construction
32” Stand Assy Construction
1. Insert the cover frame stand to the stand base
2. Insert the frame stand into the stand base
‫ز‬
‫ز‬
‫ز‬
‫ز‬
3. Assemble plate stand base and frame stand
with the 4 screws supplied.
‫ز‬
‫ز‬
‫ز‬
When attaching stand to TV set, be
sure to cover the surface to protect
from accidental damage.
4. Assemble TV set and stand with the 3 screws supplied.
Stand
Construction
37” Stand Assy Construction
1. Insert the TV set to the stand assy.
‫ز‬
When attaching stand to TV set, be
sure to cover the surface to protect
from accidental damage.
‫ز‬
‫ز‬
2. Assemble TV set and stand with screw 5EA.
10
‫ز‬
‫ز‬
Antenna
Connection
Indoor Antenna Connection
1. Connect the feeder cable of the antenna to the combining adapter.
WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong
antenna connection. Be sure to check its direction and place when
installing.
Combining adapter
2. Connect the combining adapter to the antenna input at the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest
Service Center.
REAR OF THE TV SET
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
Antenna Input
11
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
Antenna
Connection
Antenna Connection
When a coaxial cable is used : Plug the coaxial cable to the antenna socket on the wall.
Antenna socket at the back of the TV set
ANT
When a feeder cable is used : Plug the coaxial cable to the antenna socket on the wall.
Antenna socket at the back of the TV set
ANT
Combining adapter
12
Antenna
Connection
Outdoor Antenna Connection
Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses
Single Antenna Connection
VHF Antenna
REAR OF THE TV SET
L-AUDIO-R
VIDEO
L-AUDIO-R
COMP 2
VIDEO
Pb
Pr
L-AUDIO-R
S-VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
AV1
UHF Antenna
ANT
ANT
Separate Antenna Connection.
ANT
13
Video
Connection
Connecting with an External Source
You may connect S-Video1(Rear of the TV) input to enjoy clearer and brighter picture images. You can
make the connection with the AV1 or AV2 input.
REAR AND SIDE OF THE TV SET
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
HDMI
Pr
L-AUDIO-R
L-AUDIO-R
VIDEO
VIDEO
R-AUDIO-L
Pb
S-VIDEO
COMP 1
ANT
USB
L-AUDIO-R
COMP 2
VIDEO
OU T
MONITOR
OPTICAL
DIGITAL AUDIO
AV1
INPUT
AV2
INPUT
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
14
Camcorder & Video
Game Connection
Watching the Camcorder Recording or Video Game on TV
1. You can use either the S-video or the RCA connector.
2. These connectors connect to AV1/2 or S-Video1 as shown below.
3. Turn on the TV set and camcorder/video game.
4. Press "INPUT" and then You can see input menu. Select AV1, AV2 or S-Video1 mode by pressing
" and “OK” key.
REAR AND SIDE OF THE TV SET
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
HDMI
L-AUDIO-R
L-AUDIO-R
VIDEO
VIDEO
R-AUDIO-L
Pr
ANT
USB
Pb
S-VIDEO
OU T
L-AUDIO-R
COMP 2
VIDEO
AV1
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
AV2
INPUT
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
15
DVD player
connection
When connecting with a component cable
REAR OF THE TV SET
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
Note : When you connect with the component, please check the color of cable between DVD and TV set.
When connecting with a S-VHS cable and RCA cable
REAR AND SIDE OF THE TV SET
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
HDMI
L-AUDIO-R
L-AUDIO-R
VIDEO
VIDEO
R-AUDIO-L
Pr
ANT
USB
Pb
S-VIDEO
OU T
L-AUDIO-R
AV1
VIDEO
COMP 2
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
AV2
INPUT
MONITOR
Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection is
recommended for better picture quality.
• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Video
mode.
16
STB(Set Top Box)
Connection
When connecting with a HDMI cable
REAR OF THE TV SET
HDMI
L-AUDIO-R
VIDEO
L-AUDIO-R
Pb
Pr
L-AUDIO-R
S-VIDEO
AV1
COMP 2
VIDEO
OU T
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
When connecting with a component cable
REAR OF THE TV SET
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
Set Top Box
17
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
PC
Connection
When connecting with PC(D-Sub) cable.
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect the PC and TV set using the D-Sub and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Press "INPUT" and then You can see input menu. Select PC mode by pressing "
" or "OK" key.
REAR OF THE TV SET
HDMI
L-AUDIO-R
VIDEO
L-AUDIO-R
Pb
Pr
L-AUDIO-R
S-VIDEO
AV1
COMP 2
VIDEO
OU T
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
When connecting with a HDMI cable.
1. Adjust PC resolution to available resolution in LCD TV.
2. Connect the PC and TV set using the HDMI and Audio cable like below the picture.
3. Turn on the PC and TV set.
4. Press "INPUT" and then You can see input menu. Select PC mode by pressing "
" or "OK" key.
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
REAR OF THE TV SET
Note : If the graphic card of the PC only support DVI signal, you must connect the Audio cable as shown above.
18
PC
Connection
PC CONNECTION NOTES:
1) If there is a [Vertical Frequency] setting menu in the [Screen] Menu of the PC, adjust the frequency to 60Hz.
2) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution.
3) HDMI input port receives only Digital Signal.
4) Depending on the graphic card when you plug & unplug the HDMI connection, the screen may not display
correctly.
Restart the computer if this happens.
Note :
1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution of
external devices.
2. So if this mode is used at PC mode, the screen can be enlarged.
19
USB
Connection
• Connect the USB device to the USB in
jacks on the side of TV.
R-AUDIO-L
VIDEO
AV2
INPUT
USB
USB CONNECTION NOTES:
Only a USB mass storage device is recognizable.
If the USB storage device is connected through a USB hub,
the device is not recognizable.
A USB storage device using an automatic recognition
program may not be recognized.
A USB storage device which uses its own driver may not be
recognized.
The recognition speed of a USB storage device may depend
on each device.
Momery Stick
Please do not turn off the TV or unplug the USB device when
the connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which
has normal music files or image files.
Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the
Windows operating system. In case of a storage device formatted as a different utility program which is not
supported by Windows, it may not be recognized.
Please connect power to a USB storage device which requires an external power supply. If not, the device
may not be recognized.
Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not
offered by USB maker or an excessively long cable, the device may not be recognized.
Some USB storage devices may not be supported or operated smoothly.
File alignment method of USB storage device is similar to Window XP and filename can recognize up to
16 English characters.
Please backup important files because data on USB device may be damaged. Data management is
consumer's responsibility and as a result, the manufacturer does not cover data damage.
20
Cable TV
Broadcasting
Connection
External Input Connection Source
Watching cable television is only possible after you have subscribed to the local broadcasting company
and installed a cable receiver. You may make the connection to either the Component input, Video1 input
or Video2 input.
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
REAR OF THE TV SET
Antenna Input Connection
Watching cable television is only possible after you have subscribed to the local broadcasting company and
installed a cable receiver.
21
Connect with the
Dolby Digital AMP.
If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
REAR OF THE TV SET
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
Optical output
Dolby Digital AMP
Woofer
Center
Surround L
Surround R
22
Name of
Each Part
Front Panel and Side
Buttons on the TV set have the same functions as those of the remote control.
INPUT
MENU
VOL
CH
POWER
SIDE OF THE TV SET
Control Key Buttons.
INPUT Buttons : Each time you press this button, the TV will cycle through:
AIR/CABLE AV1 AV2 Component1 Component2 HDMI1 HDMI2 PC
MENU Button : Use this button to enter and exit the MENU.
VOL Buttons : Use this buttons to change your TV’s volume or to move cursor in the menu.
CH Buttons : Use this buttons to change channels on your TV or to move cursor in the menu.
POWER Button : Use this button to TV STAND-BY mode/TV ON mode.
Remote control signal receiver
The screen contains the remote control signal receiving window; therefore, point the remote control
towards the screen when using it.
Stand-by 
LED BLUE - Standby
LED OFF - SET ON
23
Name of
Each Part
Rear of the TV set
Pb
Pr
L-AUDIO-R
S-VIDEO
VIDEO
L-AUDIO-R
REAR OF THE TV SET
24
AV1
L-AUDIO-R
COMP 2
VIDEO
OU T
HDMI
MONITOR
OPTICAL
DIGITAL AUDIO
COMP 1
INPUT
PC/HDMI 1 HDMI
AUDIO
PC
SERVICE
ANT
Functionsa of the
remote control
1, POWER : Turns the TV on and off.
2, NUMBER : Press the numbers on this board; you can select
CH directly in TV mode.
(EX: When you want to select CH10, you should press down
"1", "0" and "OK" within 5second. If you only press down
"1", after 5second, CH1 will be selected.)
3, DTV(-) : Used to enter a program number for multiple
program channels such as 2-1, 2-2, etc.
4. PREVIOUS CH : Press this button, you can tune to the
previous channel.
5, EXIT : Exit from the MENU.
6, MENU : Displays the main on-screen menu.
Picture, Sound, Channel, Feature, Time.
7, GUIDE : Access Electronic Program Guide (EPG). It works
only in DTV mode.
8, NAVIGATION KEY : You can use Navigation Key to move in
multi mode.
9, FAVORITE CH : Press to switch to your favorite channels.
10, INPUT : Each time you press this button, the TV will cycle
Through: AIR/CABLE -> AV1/2 -> Comp.1/2
-> HDMI1/2 -> PC
11, OPTION : Use to quickly select frequently used functions.
12, STILL : Press this button to freeze the picture.
13, MEDIA : To enter the MEDIA HOME (It can be used only
when USB is connected to the TV)
14, P.MODE : Picture modes change as follows:
Normal -> User -> Dynamic -> Cinema -> Normal.
15, MTS : In Analog, you can select sound mode
(Mono/Stereo/SAP). In Digital, you can select audio
tracks (EX:English/Spanish/French).
16, CH : Press to switch to your memorized channels in sequence.
17, VOL : Adjust the volume.
18, MUTE : Press this button, and the sound goes off. Press
again, and the sound returns.
25
Battery Installation
Inserting Batteries into the Remote Control Unit
To install the batteries, turn the remote control over and open the
battery compartment. Insert the batteries (Two 1.5V, type AAA).
Make sure that the polarity matches with the (+) and (-) marks
inside of the battery compartment.
Note: To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
26
Basic Menu
Basic Menu
- The basic menu appears on the screen if you press the menu button of the remote control.
- There are 5 items Picture, Sound, Channel, Features, and Time in the basic menu.
- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed
upward.
1. Press the "MENU" button.
• The main menu appears if you press the “MENU” button.
User
42
81
58
50
Noise Reduction
Off
Color temp.
Dimming
10
Aspect Ratio
16 : 9
PC Screen Mode
Move
2. Press the ”
” button.
• You may setup according to the directions on the
screen after selecting the desired item by pressing the
”
” button.
• If the setup is completed, exit from the menu by
pressing the “MENU” button.
OK Select
MENU Exit
User
42
81
58
50
Noise Reduction
Off
Color temp.
Dimming
Aspect Ratio
10
16 : 9
PC Screen Mode
Move
OK Select
MENU Exit
Adjusts Picture Mode
- Mode(Normal, User, Dynamic, Cinema), Brightness, Contrast, Color, Tint (NTSC only), Sharpness,
Noise Reduction, Color Temp, Dimming, Aspect Ration and PC Screen Mode (Only PC Mode).
Adjusts Sound Mode
- Effect(Off,Dynamic Bass,ST Voice), Mode(Normal,Movie,Music,News,User),
Equalizer,Balance, Auto Volume Control, Digital Volume and Speaker
Adjusts Channel Mode
- Auto Search, Antenna(Air/Cable) Edit Channel, Fine Tune, Singnal Strength
Adjusts Feature Mode
- Parental Control, Language(English, Espanol, Francais), Caption, Menu Opacity,
MGDI Demonstration, Initialize
Adjusts Time Mode
- Clock Mode, Current Time Set, Time Zone, DST, Sleep Timer, On Timer, Off Timer
27
To Watch TV
Power, Number, DTV, OK, Mute, Input,
- Buttons with same name in the main body performs the same function.
Press the “POWER” button on TV set or
Remote control.
Note:
• The buttons of the remote control and the main body
operate only when AC power turn on.
• You must pull out the plug of TV set to shut off the AC
Power
When pressing the Digit Key button
• Press the "OK" button if using the number button for channel
selection. For example, to watch the No.9 channel, Press the
number button "9" and the "OK" button. If pressing only
number “9” button, it takes a longer time to select the channel.
• To watch the No.9-1 channel, Press the button "9", " ", "1"
and "OK" in sequence.
To turn sound off
• Press the “MUTE” button.
• No sound is heard if “MUTE” is displayed on the screen.
• Sound is heard again if you press the “MUTE” button once
again.
Check of TV operation status
• Pressing the “OK” button, the status of channel or clock
broadcasting being currently watched or entry status of
video component is displayed on the screen.
28
To Watch TV
1. Press the “POWER” button on TV set or remote
control.
• The Stand-by LED lamp turns on in blue color.
• Press the “POWER” button on the TV set or remote
control.
• The Stand By LED lamp on the front panel begins to
flicker in blue color and the TV turns on.
2. Press the “ CH ” button.
• Select the desired program by pressing the “ CH ”
button or the number buttons.
Analog
Air
26
3. Adjust volume.
• Sound reduces by pressing the “VOL ” button.
• Sound increases by pressing the “ VOL” button.
Note : Sound mutes by pressing the “MUTE” button.
30
4.Press the “POWER” button of right side of the set or
Remote control for turning the TV off.
• TV turns off and the power lamp changes to blue color.
29
Setting Up TV
Stations
Auto Search to find Channels
- All stations that can be received are stored by this method. It is recommended that you use Auto tuning during
installation of this set.
1. Press the “MENU” button to select the Channel menu.
• Move the selection bar to the Channel menu with
”
” buttons.
Antenna
Edit Channel
Fine Tune
Signal Strength
Move
2. Select the “Antenna”
• Place the selection bar on Antenna and select Air or
Cable with “
” buttons.
OK Select
MENU Exit
Antenna
Edit Channel
Fine Tune
Signal Strength
Move
Change
MENU Return
Antenna
Edit Channel
3. Select the "Auto Search".
• Place the selection bar on Auto Search and press the
“
” button.
Fine Tune
Signal Strength
Move
4. Select the "OK" selection bar pressing
by “
” button.
Change
MENU Return
Auto Search
Antenna
Edit Channel
Fine Tune
This will automatically search the
channels, do you wat to preoceed?
Signal Strength
Cancel
Move
Move
5. Wait until the Channel menu appears.
Change
OK
OK Analog
MENU Exit
MENU Return
Auto Search
Antenna
Edit Channel
Auto Search in Progress..
Fine Tune
Signal Strength
27 %
Channel Found : 0
OK Analog
Move
30
Change
MENU Return
MENU Exit
Setting Up TV
Stations
Fine tune
1. Searching for channel finely
• Select a Channel number you want to tune finely with
the “ CH ” buttons.
• Press the “MENU” button and move to the Channel
menu.
• Move the selection bar to the Fine tune with ”
”
buttons.
• Press the “CB“ buttons to adjust the fine tuning.
Antenna
Edit Channel
Fine Tune
Signal Strength
Move
Select
MENU Return
Note:
• If you are unable to get a good picture or Sound because of a poor broadcasting signal,
adjustment of Frequency might improve it.
Edit Channel
1. Adding the Channel
• Select a Channel number you want to add with the
“NUMBER” buttons.
• Press MENU Button. Select Channel by pressing “
“.
• Move to Edit Channel. Then select “ADD/DEL” by
pressing “CB“.
Edit Channel
Add
13
15
40
45
Channel Select
Del
Add
FAV.CH Favorite Channel Add/Del
MENU Return
2. Deleting the Channel
• Press MENU Button. Select Channel by pressing “
“.
• Move to Edit Channel. Then select “ADD/DEL” by
pressing “CB“.
Edit Channel
Add
Del
13
15
40
45
Channel Select
FAV.CH Favorite Channel Add/Del
31
Del
Del
Add
MENU Return

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Modify Date                     : 2008:09:04 15:41:04+09:00
Creator Tool                    :  QuarkXPress3.3k: LaserWriter 8 KH-8.7.3
Create Date                     : 2008:07:04 16:07:33+09:00
Metadata Date                   : 2008:09:04 15:41:04+09:00
Format                          : application/pdf
Creator                         : ¥Î
Title                           : S00E102 MANUAL
Document ID                     : uuid:03bd257e-4998-11dd-9d91-0016cb3acb6a
Instance ID                     : uuid:2e7a7c56-2dd5-448f-a6c9-d7509b25cd6e
Has XFA                         : No
Page Count                      : 32
Author                          : ¥Î
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5FLA37L1

Navigation menu