WINIA Electronics LA37L1 37" LCD Monitor User Manual S00E102 MANUAL

Dongbu Daewoo Electronics Corporation 37" LCD Monitor S00E102 MANUAL

Contents

User manual 2 of 2

Setting Up TVStations32FAV.CH   Favorite Channel Add/DelChannel Select Add DelMENU   ReturnEdit ChannelAddDel151311-1 (s)154045• After "Auto Search" mode, received channels are in theposition of "Add" and scrambled channels are in the positionof "Del".• Scrambled channels are displayed in (S), and deletedchannels are presented normal.ex) Scrambled Channel : 11-1(S) Deleted Channel : 11-1• Scrambled scrambled channels are fixed, they cannot bemoved to "Add" side.• If you want to watch scrambled channels, you have to contactcable TV service.
Setting Up TVStations33Move Change MENU   ReturnEdit ChannelFine TuneAntenna14-1(16)WeakSignal Strength- Reveals how strong your DTV signal is and whether you need to adjust your antenna.- The higher the signal strength, the less likely you are to experience picture degradation.- Digital TV Signals; May not be available in all areas, nor broadcast all channels.1. Locate the selection bar on the strength.• Move to strength in the Channel menu.• Display the strength status of digital signal.Signal Strength(Digital TV mode only)FAV.CH   Favorite Channel Add/DelChannel Select Add DelMENU   ReturnEdit ChannelAddDel1513154045FAV.CH   Favorite Channel Add/DelChannel Select Add DelMENU   ReturnEdit ChannelAddDel1513154045FAVORITE CHANNEL51540FAV.CH   ChangeSelect OK Move1. Programing Favorite Channel.• Press MENU button. Select Channel by pressing " " button.• Select Edit Channel selection bar by pressing " " button.• Press "FAV CH" button, on the Edit Channel mode. then youcan see " ".2. Deleting Favorite Channel.• Press MENU button. Select Channel by pressing " " button.• Select Edit Channel selection bar by pressing " " button.• Press "FAV CH" button again, on the Edit Channel mode. then"" disappeared. 3. Viewing the Favorite CH• Whenever pressing "FAV CH" button,the Channel changes as the selectedChannel order.FAV CH- You can set channel you watch frequently as favorites.
Selection of TV/VIDEOInput Signal34- When you presses INPUT Button, You can select as follows by pressing ” ” and “OK” buttons.AIR/CABLE => AV1 => AV2 => Component1 => Component2 => HDMI1 => HDMI2 => PCNote:• If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.• If sound signal is mono mode, connect it to the L-terminal of the sound input terminal.AirAnalog26INPUTAV1INPUTAV2When watching video, Camcorder, DVD, Cable TV with External Input
Selection of MultimediaInput Signal35When connecting PC, STB, DVD with Multimedia1. When you presses INPUT Button, You can select as follows by pressing the ” ” buttons.AIR/CABLE => AV1 => AV2 => Component1 => Component2 => HDMI1 => HDMI2 => PCNote:• If sound signal is mono mode, connect it to the L-terminal of the sound input terminal.INPUTHDMI 2INPUTPC VGAINPUTComponent 1INPUTComponent 2INPUTHDMI 1
Selection of MultimediaInput Signal361. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the MultimediaInput table.Multimedia Input FormatHDMI & PC & Component modeNote :1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution ofexternal devices.2. So if this mode is used at PC mode, the screen can be enlarged.3. 1600x1200 & 1920x1080P modes are supported only Full HD model.Resolution V-freq HDMI PC(D-Sub) Component Standard640 X 480 60Hz O O X VESA Standard800 X 600 60Hz O O X VESA Standard1024 X 768 60Hz O O X VESA Standard1280 X 768 60Hz O O X1280 X 1024 60Hz O O X VESA Standard1360 X 768 60Hz O O X1600 X 1200 60Hz O O X720 X 480i 60Hz X X O720 X 480p 60Hz O O O1280 X 720p 60Hz O O O1920 X 1080i 60Hz  O O O1920 X 1080p 60Hz  O O O
Selection of Media(USB)Input Signal37Function of USB1. Playing MusicThis menu shows MP3 files from the files saved on aUSB memory device.• Press MEDIA button. The Media screen appearsas follows.• Select the "MUSIC" then press the "OK" button.• Then Sub-folders are displayed.• Press "OK"button again, You can see files andfolders in the USB are displayed.• Select the mp3 files then press "OK" button.• If you don’t choose the MP3 file but Folder, press“OK” button. And then sub-folder will be opened.2. Viewing PhotoThis menu shows JPG files from the files saved on aUSB memory device.• Press MEDIA button. The Media screen appearsas follows.• Select the "Photo" then press the "OK" button.• Then files and folders in the USB are displayed.• Select the jpg files then press "OK" button.• You can see previous/next photo using the"" buttons.You can rotate photo using the " " buttons.If you want to enjoy Slide show, press “OK” button.Note : 1) It only works with a USB connected to TV.        2) It supports mp3, jpg files only. 3) Photo resolution supports up to 3264X2448.4) Supported sampling frequency on the mp3 files.(11 ~ 48KHz)5) Supports unicode. Does not support the following languages : Korean, Japanese and Chinese.
Picture Adjustment38Note :• 16:9 : 16:9 will display a true 16:9 (anamorphic) picture with no aspectdistortions.• 4:3 : General TV screen currently broadcasted.• ZOOM 1  : Enlarge vertical size of the 16:9 picture.• ZOOM 2  : Move the ZOOM 1 picture to the upper direction.• ZOOM 1 and ZOOM 2 screen are not available in PC and HDMI mode.Adjustment of Aspect ratio in TV/Video/Component mode1. Press the "MENU -> Picture -> Aspect Ratio" button.• The screen changes as below whenever by pressing the " " button.16:9  => 4:3  =>ZOOM 1  => ZOOM 2 => 16:9Color temp.DimmingAspect RatioPC Screen ModeOff16 : 9RGNoise Reduction428158104Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeOffZOOM 1RGNoise Reduction428158104Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeOffZOOM 2RGNoise Reduction428158104Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeOff4 : 3RGNoise Reduction428158104Move Change MENU   Return
Picture Adjustment39Note.• You can adjust the PC menu only in the PC mode.• During the Auto Adjust, you must not alter a screen on the monitor.• During a moving picture, Auto Adjust is liable to incorrectly work. So you must executeAuto Adjust on a still image.• When Auto Adjust is not working correctly, you can adjust with Auto adjust, Phase,Clock, H. Position, V. Position.Adjustment of the screen in the PC mode1. Select Picture by pressing the "Menu" button.• The menu screen appears as follows.2. Select PC Screen Mode• Move to PC Screen Mode in the Picture menu bypressing the ” ” buttons.• Press the ” ” button.Color temp.DimmingAspect RatioOff16 : 9RGNoise Reduction428158104PC Screen ModeMove Change MENU   Return3. Select and adjust each items.• Move to item what you want by pressing the ” ”button.• Adjust each items by pressing the ” ” button.Move Change MENU   ReturnV. PositionClockAuto AdjustPhasePC Screen ModeH. Position91688-355-41
Picture Adjustment40- The user may select various screens designed for a good picture without adjusting the brightness, contrastor color individually.Note.• Normal : For a highly defined image in a normally bright room• User : Allows the user to customize settings as desired• Dynamic : For a clear-cut image emphasizing high contrast for sports viewing• Cinema : Ideal for moviesColor temp.DimmingAspect RatioPC Screen ModeOffUser16 : 9RGNoise Reduction100100501055Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeODynamicff16 : 9RGNoise Reduction80100501065Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeOff16 : 9RGNoise Reduction50100501055Move Change MENU   ReturnColor temp.DimmingAspect RatioPC Screen ModeOCinemaff16 : 9RGNoise Reduction3070401065Move Change MENU   ReturnWhen setting up various screen modes1. Picture Mode selects what you want.                                           • Press MENU button and Select Picture mode by pressing ” ” buttons.• The screen status changes as followed:Normal => User => Dynamic => Cinema• The screen adjustment status changes as the following screens aredisplayed sequentially whenever pressing the ” ”(on picture mode)button.• The screen returns to the mode prior to turning power off when thenturning power on again.
Picture Adjustment41- You can enjoy various screens by adjusting Brightness, Contrast, Color, Tint, Sharpness, Noise Reduction,Color Temp., Dimming, Aspect Ratio, PC Screen Mode(Only in PC Mode), etc to the user’s taste.- Through color temperature control, you can change the tone of colorColor temp.DimmingAspect RatioPC Screen ModeMoveOff16 : 9RGNoise ReductionUser4281581050OK   Select MENU   ExitColor temp.DimmingAspect RatioPC Screen ModeOff16 : 9RGNoise Reduction428158104Move Change MENU   ReturnWhen adjusting the screen to taste1. Select Picture by pressing the “Menu” button.• The menu screen appears as follows.2. Select and adjust each items.                                        • Move to the PICTURE menu.• Whenever pressing the ” ” button, you can select inorder of  Brightness, Contrast, Color, Tint, Sharpness,Noise Reduction, Color Temp., Dimming, Aspect Ratio,PC Screen Mode(Only in PC Mode).• You can adjust all items by pressing the ” ” buttonsNote:• Brightness : Adjust the whole of screen brighter or darker.• Contrast : Adjust difference between brightness and darkness between objects and background on the screen.• Color : Adjust color thinly or thickly.• Tint : Adjust the natural tint of the image.• Sharpness : Adjust outline of the screen smoothly or sharply.• N . R : Reduce the noise in the picture due to poor reception or poor picture quality (Only IN TV (Analogmode) and AV1/2 mode).Note:• Tint actives when receiving a NTSC signal.• The adjusted levels are stored automatically in User mode.1. Move to the Color Temp menu with ”” buttons.• Press the ” ” buttons, select the desired ColorTemperature.Note:• Normal : Normal White• Warm : Reddish white• Cool : Bluish whiteAdjustment of Color Temperature in TV
Sound Adjustment42When adjusting sound to taste1. Adjust the Balance                                 • Move to Balance in the Sound menu.• Adjust the balance level by pressing the ” ”buttons.When selecting various sound Effects1. Sound mode selects what you want.                                    • Move to Effect in the Sound menu.• Select desirable Sound mode by pressing the ” ” buttons. (under the effect mode is off)• The Screen status changes as followed : Dynamic Bass => ST Voice => off => Dynamic BassMove Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlST VoiceMove Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlDynamic BassNote.• ST Voice  : Allows human voice to be heard more clearly.• Dynamic Bass  : Suitable for the bass effect.Move Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlOff2. Select AVC (Auto Volume Control)                    • Move to AVC in the Sound menu.• Select either AVC On/Off by pressing the ” ”buttons.Move Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlOff- The user can enjoy various sounds by adjusting Effect, Mode, Equalizer, Balance, Auto Volume Control,Digital Volume and Speaker.
Sound Adjustment43Move Change MENU   ReturnEqualizerOnUserSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnNewsSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnMovieSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnMusicSpeaker16Digital VolumeOffAuto Volume ControlOffWhen adjusting sound to taste3. Sound mode selects what you want.• Move to Mode in the Sound menu.• Select desirable Sound mode by pressing the ” ” buttons. (under the effect mode is off)• The Sound status changes as followed : User => Normal => Movie => Music => News => UserNote :• "Mode" function is available when the Effect is Off.
Sound Adjustment44When adjusting sound to taste4. Adjust the audio Equalizer                                  • Move to Mode in the Sound menu.• Select User mode by pressing the ” ” buttons.• Select and use the relevant frequency by pressing the”” buttons.• You can adjust the degree of the frequency by pressingthe ” ”buttons.5. Adjust the Digital Volume (Digital TV mode only)      • Move to Digital volume in the Sound menu.• Adjust the Digital volume level by pressing the”” buttons. Note:• Equalizer adjustment is available in User mode.• Equalizer: High quality sound range adjustment method usedfor audio product.10 kHZ: High sound range1/3.3 kHz: Middle sound range100/330 Hz: Low sound rangeNote:• Digital volume is available in DTV mode.Move Change MENU   ReturnEqualizerOnNormalSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   ReturnEqualizerOnUserSpeaker16Digital VolumeOffAuto Volume ControlOffMove Change MENU   Return10 KHz3.3 KHz1 KHz330 Hz100 HzEqualizer Setting
Sound Adjustment45Note: The availability of these additional audio tracks depends on the program.• In DTV broadcasting, you can select audio tracks(simultaneous translations of the program into foreignlanguages) by pressing the “MTS” button.Choosing a Multi-Channel Sound (MTS) in analog and digital1. Mono Sound Selection (Mono/Stereo/AutoSAP) – Analog TV Mode• If the Stereo reception is weak, you can switch to MONO by pressingthe “MTS” button. Then the OSD character will be change to “Mono”.In Mono reception the depth of sound is improved.• To switch back to stereo, press the “MTS” button again.Note: The availability of these additional audio tracks depends on the program.2. Audio track Selection – Digital TV ModeMTS:MonoMTS:Auto SAPMTS:Stereo
Features - Closed Caption46Move Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishMove Change MENU   ReturnCaptionClosed Caption CC1OOnffCaption StyleCC on MuteNote.• The Closed Caption feature doesn’t work in Component, HDMI and PC modes• Closed Caption: The availability of captions depends on the program being broadcastCC1  : The Primary Synchronous Caption Service. These are captions in the primary language thatmust be in sync with the sound, preferably matched to a specific frame.CC2  : The Special Non-Synchronous Use Captions.This channel carries data that is intended to augment information carried in the program.CC3  : Secondary Synchronous Caption Service.Alternate program-related caption data, typically second language captions.CC4  : Special Non-Synchronous Use Captions. Similar to CC2.• The Closed Caption feature doesn’t work in PIP/POP mode.Viewing Closed Caption (On-Screen Text Messages) - Analog1. Caption mode selects what you want.                         • Move to Caption in the Features menu.• Select Caption by pressing the ” ” buttons.• Select desirable Analog CC by pressing the ” ” buttons.• The Analog CC changes as followed:CC1 => CC2 => CC3 => CC4 => TEXT1 => TEXT2 =>TEXT3 => TEXT4 => SERVICE1 => SERVICE2 =>SERVICE3 => SERVICE4 => SERVICE5 => SERVICE6
Features - Closed Caption47Move Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishMove Change MENU   ReturnCaptionClosed Caption CC1OOnffCaption StyleCC on MuteMove Change MENU   ReturnCaptionClosed Caption CC1OOnffCaption StyleCC on MuteMove Change MENU   ReturnText SizeText FontText ColorBG ColorBG OpacityText OpacityEdge StyleEdge Color1. Caption mode selects what you want.                • Move to Caption in the Features menu.• Select Caption by pressing the ” ” buttons.• Select desirable Closed Caption by pressing the”” buttons.• The Digital CC changes as followed:CC1~4 => Text1~4 => Service1~62. Caption Style selects what you want. (In Digital TVmode Only)                               • Move to Caption Style in the Features menu.• Select Caption Style by pressing the ” ” buttons.• Press the ” ” buttons to select the desired sub-menu options (see options below), and then pressesthe ” ” buttons.Note:• Service 1~6 in digital caption mode may not beavailable depending on the broadcast.Note:• The digital caption feature is available  only in Digital TV mode. • The availability of captions depends on the program being broadcast.• Default means to follow the standard set by the broadcaster.• Text Size: This option consists of Default, Small, Standard, and Large. The default is Standard.• Text Font: This option consists of Default, Font1~7. You can change the font you want. The default is Style 0.• Text Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You canchange the color of the letter. The default is White.• BG Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You canchange the background color of the caption. The default is Black.• BG Opacity: This option consists of Default, Light, and Transparent. You can change the Background opacity of thecaption.Viewing Closed Caption (On-Screen Text Messages) - Digital
Features - Parental Control48Move Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishMove Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishEnter Password0~9   Enter- - - -MENU   ReturnMove Change MENU   ReturnRating StatusChange PasswordMPAAOffTV-RatingCan.English RatingCan.French RatingMove Select MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishEnter PasswordNew PasswordConfirm0~9   Enter OK    OK- - - -- - - -MENU   ReturnCancel OK1. Change password                            • Move to Parental control in the Features menu.• The message “Enter password” will appear. Enteryour 4 digit password Note:• The default password of a new TV set is “0-0-0-0”.• Move to Change Password in the Parental Control• Press the ” ” buttons to change the password.• The Change password screen will appear. Chooseany 4 digits for new password and enter them.Note:• If you forget the password, you must call the Service Center.Adjustment of Parental Control- The Parental control feature automatically looks out programs that are deemed inappropriate for children.--
Features - Parental Control49Move Change MENU   ReturnRating StatusChange PasswordMPAAOffTV-RatingCan.English RatingCan.French RatingMove Change MENU   ReturnRating StatusChange PasswordMPAAOnTV-RatingCan.English RatingCan.French Rating2. Rating Status                 • Move to Rating Status in the Parental Control• Select either On or Off by pressing the ” ”buttons.Move MENU   ReturnOK OKGSuitable for All AgesParental Guidance SuggestedParents Strongly CautionedRested. under 17 must be accompanied by adultNo One 17 and Under AdmittedNo One 17 and Under AdmittedNot Rated by MPAAPGMPAAPG13RNC17XNRAdjustment of Parental Control3. MPAA• Move to MPAA in the Parental Control and press the”” buttons.• The MPAA screen will appear.Press the ” ” buttons to select the MPAA categories:G: General audiencePG: Parental guidancePG-13: Viewers 14 and overR: Mature audienceNC17: No children under age 17X: Adults onlyNR: Not rated• Press the “OK” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank = unblocked “ “ = Blocked)Note:• The Parental Control will automatically block any categories that are “more restrictive”. For example, if you block PG-13 category, then R, NC and X will automatically be blocked also.
Features - Parental Control504. TV Rating                 • Move to Block and select Block to On.• Move to TV Rating in the Parental Control and press the”” buttons.• The TV Rating screen will appear.Press the ” ” buttons to select one of the six agedbased categories:Y: Young children 14: Viewers 14 and overY7: Children 7 and overMA: Mature audienceG: General audiencePG: Parental guidance• Press the “OK” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank = Unblocked “ “ = Blocked)Note:• The Y, Y7, G, PG, 14 and MA have additional options.FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence• The Parental Control will automatically block certain categories that are “more restrictive”. For example, if you block “Y”category, then Y7 will automatically be blocked. Similarly, if you block the G category, then all the categories in the “youngadult” group will be blocked (G, PG, 14, and MA). The Sub-ratings (D, L, S, and V) work together similarly.YY7GPG14MAFVD L S VDLSVLAllow AllSTV RatingChildrenGeneralVMove OK   OK MENU ReturnMove Change MENU   ReturnRating StatusChange PasswordMPAAOnTV-RatingCan.English RatingCan.French RatingYY7GPG14MAFVD L S VDLSVLAllow AllSTV RatingChildrenGeneralVMove OK   OK MENU Return• Select on of these TV-Ratings(Y, Y7, G, PG, 14 and MA)and press the ” ” buttons.• Press the “OK” button to select the sub-rating.Note:• The Parental Control will automatically block certain categories that are “more restrictive”. For example,if you block “L” sub-rating in PG, then the L sub-rating in 14 and MA will automatically be blockedAdjustment of Parental Control
Features - Parental Control51Move Change MENU   ReturnRating StatusChange PasswordMPAAOnTV-RatingCan.English RatingCan.French RatingMove MENU   ReturnOK OKEExemptChildren under ages 8Children ages 8 and overGeneralParental Guidance  Suggested Ages 14 and over  CCan.English RatingAllow AllC8+GPG14+Ages 18 and over18+Adjustment of Parental Control5. Can. English Rating :• Move to Can. English Rating in the Parental Controland press the “ “ buttons.• The Can. English Rating screen will appear.Press the “VOL” buttons to select the Can. EnglishRating categories: Press the EXIT button to exit.C: Programming intended for children under age 8.C8+: Programming generally consideredacceptable for children 8 years and over towatch on their own.G: General programming, suitable for allaudiences.PG: Parental Guidance.14+: Programming contains themes or contentwhich may not be suitable for viewers underthe age of 14.18+: Adult programming.• Press the “OK” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank = unblocked “ “ = Blocked)Note:The Parental Control will automatically block anycategory that are “more restrictive” For example, ifyou block G category, then PG, 14+ and 18+ willautomatically be blocked also.
Features - Parental Control526. Can. French Rating :• Can. French Rating in the Parental Control and press the““ buttons.• The Can. French Rating screen will appear.Press the “ “ buttons to select the Can. French Ratingcategories: Press the EXIT button to exit.G: General8 ans+ : Programming generally considered acceptablefor children 8 years and over to watch on theirown.13 ans+: Programming may not be suitable for childrenunder the age of 13.16 ans+: Programming is not suitable for children underthe age of 16.18 ans+: Programming restricted to adults.• Press the “OK” button. Depending on your existingsetup, the “ “ symbol will be selected. (blank = unblocked “ “ = Blocked)Note:The Parental Control will automatically block anycategory that are “more restrictive” For example, if youblock 8 ans+ category, then 13 ans+, 16 ans+ and 18ans+ will automatically be blocked also.7. Downloadable RRT :Allow all: Press to unlock all TV ratings.Block all: Press to lock all TV ratings.Parental restriction levels differ depending on thebroadcasting station.The default menu name andDownloadable US rating changes depending on thedownloaded information. Even if you set the On-screendisplay to your desired language, the “DownloadableU.S. Rating” menu will appear in English only.The rating will automatically block certain categories thatare more restrictive.The rating titles (For example: Humor Level..etc) and TVratings (For example: DH, MH, H..etc) may differdepending on the broadcasting station.Move Change MENU   ReturnRating StatusChange PasswordMPAAOnTV-RatingCan.English RatingCan.French RatingMove MENU   ReturnOK OKEExemptFor allChildren ages 8 and upTeenagers 13 and upTeenagers 16 and up  Adults 18 and up  CCan.French RatingAllow All8ans+13ans+16ans+18ans+
53Move Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglishMove Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglish1. Setup of MGDi Demonstration• Move to MGDi Demonstration in the Features menu.• Press the ” ” buttons. In this demo version ofMGDi you can only see the functional difference ofON/OFF, not the difference of quality of picture.1. Setup of Menu Opacity• Move to Menu Opacity in the Features menu.• Adjust the translucent level of OSD backgroundby pressing the ” ” buttons.Note:• New technology, MGDi Demonstration, brings viewers more detailed,clearer and more natural image with picture compensation algorithm.• MGDi Demonstration is not available in PC and HDMI mode.When viewing how MGDi improves the picture.Selection of LanguageMove Change MENU   ReturnCaption11LanguageMGDI DemonstrationMenu OpacityParental ControlInitializeEnglish1. Select Language• Move to Language in the Features menu.• Select your desired language by pressing the”” buttons. Then it will be setting automatically.• The language change as the followed:English => Español => Français => EnglishWhen adjusting the transparency of the menu screenFeatures - ETC
Time Setting54Move Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff Timer1. Clock Menu• Move to Clock mode in the Time menu.• It can change ‘MANUAL’ , ‘AUTO’ by pressing““ buttons.2. Current Time Set• Move to Current Time Set in the Time menu.• To go to the Current Time Set, press the “ “buttons.• Place the cursor to AM / PM / Hour / Min. /Month / Day /Year. with “ “ buttons.• Set the AM / PM / Hour / Min. / Month / Day/Year.with the “ “ buttons and then pressesthe “MENU” button to complete.Note :1. Information of Auto Clock is required to DTV signal.2.Current Time Set is available in MANUAL mode.3. Time Zone• Move to Time zone in the Time menu.• Select the Time zone to desirable Time zone bypressing the “ “ button.• The Time zone change as the followed:Central => Eastern => Atlantic => Hawaii =>Alaska => Pacific => MountainMove Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff TimerMove Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff TimerAdjustment of Time
Move Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff TimerMove Change MENU   ReturnOn TimerOn Timer OnCableOn Time SetTime Input1On Timer ChannelOn Timer Volume 20Move Change MENU   ReturnOn TimerOn Timer OnCableOn Time SetTime Input1On Timer ChannelOn Timer Volume 20Move Change MENU   ReturnOn TimerOn Timer OnCableOn Time SetTime Input1On Timer ChannelOn Timer Volume 204. Setting the On Timer / On Time / On CH / OnVolume• Move to Wake Timer in the Time menu.• Select the Wake Timer to "On" by pressing the ” ”button.• Move to Wake Time with the ” ” buttons.• To go to Wake Time, press the ””buttons.• Place the cursor to AM/PM / Hour / Min. with ” ”buttons.• Set the AM/PM / Hour / Min. with the ” ” buttonsand then press the “OK” and then press “MENU”buttons.• Move to Wake CH. in the Time menu.• Select the Wake CH. to desirable Channelby pressingthe ” ” buttons.• Move to Wake Vol. in the Time menu.• Select the Wake Vol. to desirable Volume by pressingthe ” ” buttons.Note:• Confirm the Current Time is set. The Wake Timer is only available when the Current Time is set.• The set will be turned on at selected time.• If adjusted once, the Wake Time continues to operate everyday unless canceling setup or turn the AC power off.Adjustment of On TimerTime Setting55
Time Setting56Move Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff Timer5. Setting DST• Move to DST in the Time menu. and select On, Off with” ”buttons.Note: Timezone and DST is available in Auto Clock mode6. Setting the Sleep mode.• By pressing the ” ”button on the remote controlrepeatedly, you can select one of the following settings:Sleep Timer: Off => 5 => 10 => 15  => 30 => 45 => 60 =>90 => 120 => Off• The set will turn off after the time you select.Note:• If an active signal is not present for about 30 minutes,the set will automatically turn to Stand-by mode.Move Change MENU   ReturnClock Mode AutoCurrent Time Set AM 12:00EasternAutoTime ZoneDSTOffSleep TimerOn TimerOff TimerAdjustment of Off Time
Channel Banner571. General InformationChannel Mode: Display the current channel mode (Air/Cable/DTV).Channel Number: Displays the current channel number.Channel Name: Displays the current channel name. (Digital TV mode only)Program Name: Displays the current program name. (Digital TV mode only)Program information: Displays the current program information. (Digital TV mode only)Program time: Display the current / next program time (start ~ end). (Digital TV mode only)Icon: Displays the service items (Channel State, Screen Size, Audio Service, Dolby Digital, FavoriteChannel, and ETC) in the current program.Note: Owing to our policy of continuous improvement, the availability of icon which depends uponthe program may change.Current time: Displays the current time.Channel Banner- The channel banner displays information about a channel number, name,broadcasting time, audio service and more. You can see this banner by pressing“OK” button on the Remote Control.56784:00 PM 12:00 PMENGLISH16:91080iDOLBY DIGITAL2007Web. Dec 254:45 PM4DIGITAL      StrongABC       D-1ABC NewsNext Program : ABC Monie : Omega Man9-1
Channel Banner58Electronic Program Guide (EPG) (Digital TV mode only)- The DTV Electronic Program Guide (EPG) displays program informationabout each channel, up to seven days ahead.- You can edit your own profiles, and record programs.- By pressing the “GUIDE” button to access EPG directly, you can see allchannels broadcasting now.Note:• The EPG channel is only available when watching DTV channels.1. Select a desired channel• Select a channel with the ” ” buttons.• Press the “GUIDE” button and move a program with the ” ”buttons.• If you need detail information, press the ”” button.Move OK Watch Channel CH +/- Page Move MENU   ExitProgram Guide 12/06/2008 05:21  PMChannels5-1   WNYW DT5-2   WNYW DT05:00 PM  The Tyra Banks Show06:00 PM  Girlfriends06:30 PM  The Bernie Mac Show07:00 PM  The King of Queens07:30 PM  The King of Queens08:00 PM  IFL Battleground10:00 PM  My 9 News11:00 PM  The Bernie Mac Show11:30 PM  One on One12:00 PM  Malcolm in the MiddleSchedule
Troubleshooting59Please check the following items before asking for repair service.Symptoms and SolutionsSymptom Check itemsNeither picture - Check the contact of sockets is all right.nor sound - Check the TV main power is on.Picture is OK - Check the Volume control is set to minimum or mute.but no soundSound is OK, but - Check the color control and adjust it properly.no color. - Check the program is in color and not in black & white.The picture has - Check the antenna is installed correctly and if not, adjust the overlappedimage. antenna toward the broadcasting station.Picture has “snow - Check the antenna or its connection is correct and if not, correct thenoise”. antenna fault or connection cable fault.- Check if car traffic or neon sign disturbs the sound effect.Stripes on - Check the susceptible interference by other electronic devices such picture. as radio and television and keep magnetic or electronic devices away from the TV.Bad stereo or Dual - Long distance from the station or other radio waves can generate sound. bad sound reception. If so, change the mode to Mono.Remote control - Check if the batteries in the Remote control are dead.does not - Check if any object between IR sensor of the TV and the Remote work. control does not obstruct.123456789POWERMUTEPREV. CH0100
Troubleshooting60In Digital TV mode• AFTER SALES SERVICEDo not hesitate to contact your retailer or service agent if a change in the performance of your productindicates that a faulty condition may be present.Some Problems will only occur when viewing DTV channels.Due to the different techniques involved in digital reception, DTV signal quality can be poor even if youappear to have a strong signal when viewing analog programs.The DTV system requires a good quality signal to provide the best picture. When viewing analog pictures,interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but stillprovides a viewable picture. For the DTV system, Interference such as this can disrupt the flow of datacausing the picture to appear to be made up of large blocks, or to freeze intermittently. If the picturedisappears completely, this could mean that signal quality is very poor. If this happens often, you may needto improve your aerial system to provide a better signal. This TV contains a complex microprocessor whichenables you to view enhanced digital services. Occasionally this device may need to be reset. This can bedone by pressing the stand-by button on your remote control or the power switch on the front panel.SYMPTOM CHECKSCheck that DTV transmissions are available fromthe transmitter you are currently using. If not, trydirecting the aerial at another local transmitter.No DTV Channels listed in the TV Guide after Auto SetupCheck analog transmissions. If picture quality ispoor, you will need to improve or change youraerial system to receive DTV channels. Consult alocal installer.Blocky interference.  Blocky interference indicates that the signalquality is poor.Picture freezes intermittently. You should consider improving your aerialsystem.To check the quality of your signal use the Signalstrength (See page 29)SYMPTOM CHECKS- Check the resolution and frequency of your PC.Then, adjust them to optimum condition for LCD TV.“NO SIGNAL” appears on the screen. - Refer  to  the  table of  PC  mode input format. (Ifregistered resolution and Frequency on the table nolisted then no picture will be displayed.)“Not available” appears on the screen.  - Ensure that the signal cable is firmly connected to PCand TV.Image is not clear.  - Adjust the PHASE control.Image is not centered.  - Run the Auto setup.In PC mode
61Standard ofProductOwing to our policy of continuous improvement, specifications may change.Screen Size 32” 37”  42”  42”(Full HD)LCD Panel Aspect Ratio 16:9 16:9Resolution 1366 x 768 (WXGA) 1920 x1080 (FHD)Pixel Pitch170.25 x 510.75 x RGB 0.200 x 0.600 mm x RGB 0.227 x 0.681 mm x RGB 0.4845 x 0.4845 mm x RGBDimension(W x H x D)  Set Dimension 806 x 626.5 x 230mm 940 x 720 x 328.5mm 1060 x 823 x 328mm 1060 x 823 x 328mmPower ConsumptionMarked on the back of the productTV System NTSC, ATSCPower Source 110 ~ 220V, 60Hz
“GOLDEN WARRANTY”Crosley Corporation warrants this product to be free from defects in material and workmanship andagrees to repair or replace this product to remedy such defects.This warranty covers TWO YEAR LABOR and TWO YEAR PARTS from the date of the originalpurchase.This warranty applies only to product purchased from an authorized Crosley dealer and used withinthe boundaries of the U.S.A. and Canada.This warranty does not apply to product that has been improperly installed, subjected to usage forwhich the product was not designed, misused or abused, damaged during transportation, or which hasbeen altered or repaired in any way that affects the reliability or detracts from its performance.How you get warranty serviceWarranty service can only be provided by an authorized Crosley service center. For the closestauthorized service center to you, please contact your Dealer. In order to receive warranty service youmust provide the authorized service center with a copy of proof of purchase, signifying the date ofpurchase and the name of the Dealer from whom you purchased the product.Statutory warrantiesThe purchaser may have rights under existing provincial or federal laws, and where any terms of thiswarranty are prohibited by such laws, they are deemed null and void, but the remainder of thewarranty shall remain in effect.If you require further assistance, please contact the Crosley dealer or go to:www.crosley.com to locate your nearest Crosley Distributor.Crosley Corporation111 Cloverleaf Drive, Suite 200Winston-Salem, NC 27103Service Call Toll Free Number: 1-877-393-7823

Navigation menu