WINIA Electronics LA42L1 42" LCD Monitor User Manual S00E102 MANUAL

Dongbu Daewoo Electronics Corporation 42" LCD Monitor S00E102 MANUAL

Contents

User manual 2 of 2

Download: WINIA Electronics LA42L1 42" LCD Monitor User Manual S00E102 MANUAL
Mirror Download [FCC.gov]WINIA Electronics LA42L1 42" LCD Monitor User Manual S00E102 MANUAL
Document ID996658
Application ID7E+fS6aE85yScxVXu06o5A==
Document DescriptionUser manual 2 of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize177.69kB (2221073 bits)
Date Submitted2008-09-07 00:00:00
Date Available2008-09-07 00:00:00
Creation Date2008-07-04 16:07:33
Producing SoftwareAcrobat Distiller 7.0.5 for Macintosh
Document Lastmod2008-09-04 15:38:43
Document TitleS00E102 MANUAL
Document CreatorQuarkXPress3.3k: LaserWriter 8 KH-8.7.3
Document Author: ¥Î

Setting Up TV
Stations
• After "Auto Search" mode, received channels are in the
position of "Add" and scrambled channels are in the position
of "Del".
Edit Channel
Add
Del
13
11-1 (s)
15
40
• Scrambled channels are displayed in (S), and deleted
channels are presented normal.
45
Channel Select
FAV.CH Favorite Channel Add/Del
ex) Scrambled Channel : 11-1(S) Deleted Channel : 11-1
• Scrambled scrambled channels are fixed, they cannot be
moved to "Add" side.
• If you want to watch scrambled channels, you have to contact
cable TV service.
32
Del
Add
MENU Return
Setting Up TV
Stations
FAV CH
- You can set channel you watch frequently as favorites.
1. Programing Favorite Channel.
• Press MENU button. Select Channel by pressing "
" button.
• Select Edit Channel selection bar by pressing "
" button.
• Press "FAV CH" button, on the Edit Channel mode. then you
can see " ".
Edit Channel
Add
Del
13
15
40
45
Channel Select
Del
Add
FAV.CH Favorite Channel Add/Del
MENU Return
2. Deleting Favorite Channel.
• Press MENU button. Select Channel by pressing "
" button.
• Select Edit Channel selection bar by pressing "
" button.
• Press "FAV CH" button again, on the Edit Channel mode. then
" " disappeared.
Edit Channel
Add
Del
13
15
40
45
Channel Select
Del
Add
FAV.CH Favorite Channel Add/Del
MENU Return
FAVORITE CHANNEL
3. Viewing the Favorite CH
• Whenever pressing "FAV CH" button,
the Channel changes as the selected
Channel order.
15
40
FAV.CH Change
Select
OK Move
Signal Strength(Digital TV mode only)
- Reveals how strong your DTV signal is and whether you need to adjust your antenna.
- The higher the signal strength, the less likely you are to experience picture degradation.
- Digital TV Signals; May not be available in all areas, nor broadcast all channels.
1. Locate the selection bar on the strength.
• Move to strength in the Channel menu.
• Display the strength status of digital signal.
Antenna
Edit Channel
Fine Tune
Signal Strength
14-1(16)
Weak
Move
33
Change
MENU Return
Selection of TV/VIDEO
Input Signal
When watching video, Camcorder, DVD, Cable TV with External Input
- When you presses INPUT Button, You can select as follows by pressing ”
” and “OK” buttons.
AIR/CABLE => AV1 => AV2 => Component1 => Component2 => HDMI1 => HDMI2 => PC
Analog
Air
INPUT
26
AV1
INPUT
AV2
Note:
• If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
• If sound signal is mono mode, connect it to the L-terminal of the sound input terminal.
34
Selection of Multimedia
Input Signal
When connecting PC, STB, DVD with Multimedia
1. When you presses INPUT Button, You can select as follows by pressing the ”
” buttons.
AIR/CABLE => AV1 => AV2 => Component1 => Component2 => HDMI1 => HDMI2 => PC
INPUT
PC VGA
INPUT
INPUT
HDMI 2
Component 1
INPUT
INPUT
HDMI 1
Component 2
Note:
• If sound signal is mono mode, connect it to the L-terminal of the sound input terminal.
35
Selection of Multimedia
Input Signal
HDMI & PC & Component mode
1. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia
Input table.
Multimedia Input Format
Resolution
V-freq
HDMI
PC(D-Sub)
Component
Standard
640 X 480
60Hz
VESA Standard
800 X 600
60Hz
VESA Standard
1024 X 768
60Hz
VESA Standard
1280 X 768
60Hz
1280 X 1024
60Hz
1360 X 768
60Hz
1600 X 1200
60Hz
720 X 480i
60Hz
720 X 480p
60Hz
1280 X 720p
60Hz
1920 X 1080i
60Hz
1920 X 1080p
60Hz
VESA Standard
Note :
1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution of
external devices.
2. So if this mode is used at PC mode, the screen can be enlarged.
3. 1600x1200 & 1920x1080P modes are supported only Full HD model.
36
Selection of Media(USB)
Input Signal
Function of USB
1. Playing Music
This menu shows MP3 files from the files saved on a
USB memory device.
• Press MEDIA button. The Media screen appears
as follows.
• Select the "MUSIC" then press the "OK" button.
• Then Sub-folders are displayed.
• Press "OK"button again, You can see files and
folders in the USB are displayed.
• Select the mp3 files then press "OK" button.
• If you don’t choose the MP3 file but Folder, press
“OK” button. And then sub-folder will be opened.
2. Viewing Photo
This menu shows JPG files from the files saved on a
USB memory device.
• Press MEDIA button. The Media screen appears
as follows.
• Select the "Photo" then press the "OK" button.
• Then files and folders in the USB are displayed.
• Select the jpg files then press "OK" button.
• You can see previous/next photo using the
" buttons.
You can rotate photo using the "
" buttons.
If you want to enjoy Slide show, press “OK” button.
Note : 1) It only works with a USB connected to TV.
2) It supports mp3, jpg files only.
3) Photo resolution supports up to 3264X2448.
4) Supported sampling frequency on the mp3 files.(11 ~ 48KHz)
5) Supports unicode. Does not support the following languages : Korean, Japanese and Chinese.
37
Picture Adjustment
Adjustment of Aspect ratio in TV/Video/Component mode
1. Press the "MENU -> Picture -> Aspect Ratio" button.
• The screen changes as below whenever by pressing the "
16:9 => 4:3 =>ZOOM 1 => ZOOM 2 => 16:9
" button.
42
42
81
81
58
58
Noise Reduction
Noise Reduction
Off
Color temp.
Color temp.
Dimming
Dimming
10
Aspect Ratio
Change
10
Aspect Ratio
16 : 9
ZOOM 1
PC Screen Mode
PC Screen Mode
Move
Off
Move
MENU Return
Change
MENU Return
42
42
81
81
58
58
Noise Reduction
Off
Noise Reduction
Color temp.
Color temp.
Dimming
Aspect Ratio
Dimming
10
4:3
Aspect Ratio
PC Screen Mode
Move
Change
Off
10
ZOOM 2
PC Screen Mode
MENU Return
Move
Note :
• 16:9
Change
MENU Return
: 16:9 will display a true 16:9 (anamorphic) picture with no aspect
distortions.
• 4:3
: General TV screen currently broadcasted.
• ZOOM 1
: Enlarge vertical size of the 16:9 picture.
• ZOOM 2
: Move the ZOOM 1 picture to the upper direction.
• ZOOM 1 and ZOOM 2 screen are not available in PC and HDMI mode.
38
Picture Adjustment
Adjustment of the screen in the PC mode
1. Select Picture by pressing the "Menu" button.
• The menu screen appears as follows.
2. Select PC Screen Mode
• Move to PC Screen Mode in the Picture menu by
pressing the ”
” buttons.
• Press the ”
” button.
42
81
58
Noise Reduction
Off
Color temp.
Dimming
10
Aspect Ratio
16 : 9
PC Screen Mode
Move
3. Select and adjust each items.
• Move to item what you want by pressing the ”
”
button.
• Adjust each items by pressing the ”
” button.
MENU Return
PC Screen Mode
Auto Adjust
Move
Note.
• You can adjust the PC menu only in the PC mode.
• During the Auto Adjust, you must not alter a screen on the monitor.
• During a moving picture, Auto Adjust is liable to incorrectly work. So you must execute
Auto Adjust on a still image.
• When Auto Adjust is not working correctly, you can adjust with Auto adjust, Phase,
Clock, H. Position, V. Position.
39
Change
Phase
Clock
1688
H. Position
-355
V. Position
-41
Change
MENU Return
Picture Adjustment
When setting up various screen modes
- The user may select various screens designed for a good picture without adjusting the brightness, contrast
or color individually.
1. Picture Mode selects what you want.
• Press MENU button and Select Picture mode by pressing ”
” buttons.
• The screen status changes as followed:
Normal => User => Dynamic => Cinema
• The screen adjustment status changes as the following screens are
displayed sequentially whenever pressing the ”
”(on picture mode)
button.
• The screen returns to the mode prior to turning power off when then
turning power on again.
User
100
50
100
100
50
50
55
55
Noise Reduction
Noise Reduction
Off
Off
Color temp.
Color temp.
Dimming
Dimming
10
Aspect Ratio
10
Aspect Ratio
16 : 9
16 : 9
PC Screen Mode
PC Screen Mode
Move
Move
Change
Change
MENU Return
MENU Return
Dynamic
Cinema
80
30
100
70
50
40
65
65
Noise Reduction
Noise Reduction
Off
Dimming
Dimming
10
Note.
• Normal
• User
• Dynamic
• Cinema
16 : 9
PC Screen Mode
Move
Change
10
Aspect Ratio
16 : 9
PC Screen Mode
Move
Off
Color temp.
Color temp.
Aspect Ratio
Change
MENU Return
MENU Return
: For a highly defined image in a normally bright room
: Allows the user to customize settings as desired
: For a clear-cut image emphasizing high contrast for sports viewing
: Ideal for movies
40
Picture Adjustment
When adjusting the screen to taste
- You can enjoy various screens by adjusting Brightness, Contrast, Color, Tint, Sharpness, Noise Reduction,
Color Temp., Dimming, Aspect Ratio, PC Screen Mode(Only in PC Mode), etc to the user’s taste.
1. Select Picture by pressing the “Menu” button.
• The menu screen appears as follows.
User
42
81
58
50
2. Select and adjust each items.
• Move to the PICTURE menu.
• Whenever pressing the ”
” button, you can select in
order of Brightness, Contrast, Color, Tint, Sharpness,
Noise Reduction, Color Temp., Dimming, Aspect Ratio,
PC Screen Mode(Only in PC Mode).
• You can adjust all items by pressing the ”
” buttons
Noise Reduction
Off
Color temp.
Dimming
10
Aspect Ratio
16 : 9
PC Screen Mode
Move
OK Select
MENU Exit
Note:
• Brightness : Adjust the whole of screen brighter or darker.
• Contrast : Adjust difference between brightness and darkness between objects and background on the screen.
• Color : Adjust color thinly or thickly.
• Tint : Adjust the natural tint of the image.
• Sharpness : Adjust outline of the screen smoothly or sharply.
• N . R : Reduce the noise in the picture due to poor reception or poor picture quality (Only IN TV (Analog
mode) and AV1/2 mode).
Note:
• Tint actives when receiving a NTSC signal.
• The adjusted levels are stored automatically in User mode.
Adjustment of Color Temperature in TV
- Through color temperature control, you can change the tone of color
1. Move to the Color Temp menu with ”
” buttons.
• Press the ”
” buttons, select the desired Color
Temperature.
42
81
58
Note:
• Normal : Normal White
• Warm : Reddish white
• Cool : Bluish white
Noise Reduction
Off
Color temp.
Dimming
Aspect Ratio
10
16 : 9
PC Screen Mode
Move
41
Change
MENU Return
Sound Adjustment
When selecting various sound Effects
1. Sound mode selects what you want.
• Move to Effect in the Sound menu.
• Select desirable Sound mode by pressing the ”
” buttons. (under the effect mode is off)
• The Screen status changes as followed : Dynamic Bass => ST Voice => off => Dynamic Bass
Off
Normal
Equalizer
Auto Volume Control
Digital Volume
Off
Speaker
On
Move
Change
16
MENU Return
Dynamic Bass
ST Voice
Normal
Normal
Equalizer
Equalizer
Move
Note.
• ST Voice
• Dynamic Bass
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
Auto Volume Control
Digital Volume
Off
Speaker
On
Move
MENU Return
Change
16
MENU Return
: Allows human voice to be heard more clearly.
: Suitable for the bass effect.
When adjusting sound to taste
- The user can enjoy various sounds by adjusting Effect, Mode, Equalizer, Balance, Auto Volume Control,
Digital Volume and Speaker.
1. Adjust the Balance
• Move to Balance in the Sound menu.
• Adjust the balance level by pressing the ”
buttons.
Off
Normal
Equalizer
”
Move
2. Select AVC (Auto Volume Control)
• Move to AVC in the Sound menu.
• Select either AVC On/Off by pressing the ”
buttons.
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Off
Normal
Equalizer
”
Move
42
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Sound Adjustment
When adjusting sound to taste
3. Sound mode selects what you want.
• Move to Mode in the Sound menu.
” buttons.
• Select desirable Sound mode by pressing the ”
(under the effect mode is off)
• The Sound status changes as followed : User => Normal => Movie => Music => News => User
Off
Normal
Equalizer
Move
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Off
Off
User
Movie
Equalizer
Move
Equalizer
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Move
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
Off
Music
Equalizer
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
MENU Return
Off
News
Equalizer
Move
16
16
MENU Return
Move
Note :
• "Mode" function is available when the Effect is Off.
43
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Sound Adjustment
When adjusting sound to taste
4. Adjust the audio Equalizer
• Move to Mode in the Sound menu.
• Select User mode by pressing the ”
” buttons.
• Select and use the relevant frequency by pressing the
”
” buttons.
• You can adjust the degree of the frequency by pressing
the ”
” buttons.
Note:
• Equalizer adjustment is available in User mode.
• Equalizer: High quality sound range adjustment method used
for audio product.
10 kHZ: High sound range
1/3.3 kHz: Middle sound range
100/330 Hz: Low sound range
Off
User
Equalizer
On
Change
16
MENU Return
Equalizer Setting
10 KHz
3.3 KHz
1 KHz
330 Hz
100 Hz
Move
Change
MENU Return
Off
Normal
Equalizer
Move
44
Off
Speaker
Move
5. Adjust the Digital Volume (Digital TV mode only)
• Move to Digital volume in the Sound menu.
• Adjust the Digital volume level by pressing the
”
” buttons.
Note:
• Digital volume is available in DTV mode.
Auto Volume Control
Digital Volume
Auto Volume Control
Digital Volume
Off
Speaker
On
Change
16
MENU Return
Sound Adjustment
Choosing a Multi-Channel Sound (MTS) in analog and digital
1. Mono Sound Selection (Mono/Stereo/AutoSAP) – Analog TV Mode
• If the Stereo reception is weak, you can switch to MONO by pressing
the “MTS” button. Then the OSD character will be change to “Mono”.
In Mono reception the depth of sound is improved.
• To switch back to stereo, press the “MTS” button again.
MTS:
Mono
MTS:
Stereo
MTS:
Auto SAP
Note: The availability of these additional audio tracks depends on the program.
2. Audio track Selection – Digital TV Mode
• In DTV broadcasting, you can select audio tracks
(simultaneous translations of the program into foreign
languages) by pressing the “MTS” button.
Note: The availability of these additional audio tracks depends on the program.
45
Features Closed Caption
Viewing Closed Caption (On-Screen Text Messages) - Analog
1. Caption mode selects what you want.
• Move to Caption in the Features menu.
• Select Caption by pressing the ”
” buttons.
Parental Control
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
• Select desirable Analog CC by pressing
the ”
” buttons.
Change
MENU Return
Caption
On
Closed Caption
CC1
Caption Style
CC on Mute
Move
Change
Off
MENU Return
• The Analog CC changes as followed:
CC1 => CC2 => CC3 => CC4 => TEXT1 => TEXT2 =>
TEXT3 => TEXT4 => SERVICE1 => SERVICE2 =>
SERVICE3 => SERVICE4 => SERVICE5 => SERVICE6
Note.
• The Closed Caption feature doesn’t work in Component, HDMI and PC modes
• Closed Caption: The availability of captions depends on the program being broadcast
CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that
must be in sync with the sound, preferably matched to a specific frame.
CC2 : The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the program.
CC3 : Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
CC4 : Special Non-Synchronous Use Captions. Similar to CC2.
• The Closed Caption feature doesn’t work in PIP/POP mode.
46
Features Closed Caption
Viewing Closed Caption (On-Screen Text Messages) - Digital
1. Caption mode selects what you want.
• Move to Caption in the Features menu.
• Select Caption by pressing the ”
” buttons.
Parental Control
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
• Select desirable Closed Caption by pressing the
” buttons.
”
• The Digital CC changes as followed:
CC1~4 => Text1~4 => Service1~6
Change
MENU Return
Caption
On
Closed Caption
CC1
Caption Style
CC on Mute
Note:
• Service 1~6 in digital caption mode may not be
available depending on the broadcast.
Move
2. Caption Style selects what you want. (In Digital TV
mode Only)
• Move to Caption Style in the Features menu.
• Select Caption Style by pressing the ”
” buttons.
Change
Off
MENU Return
Caption
On
Closed Caption
CC1
Caption Style
CC on Mute
Move
” buttons to select the desired sub• Press the ”
menu options (see options below), and then presses
the ”
” buttons.
Change
Off
MENU Return
Text Size
Text Font
Text Color
BG Color
Text Opacity
BG Opacity
Edge Style
Edge Color
Move
Change
MENU Return
Note:
• The digital caption feature is available only in Digital TV mode.
• The availability of captions depends on the program being broadcast.
• Default means to follow the standard set by the broadcaster.
• Text Size: This option consists of Default, Small, Standard, and Large. The default is Standard.
• Text Font: This option consists of Default, Font1~7. You can change the font you want. The default is Style 0.
• Text Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You can
change the color of the letter. The default is White.
• BG Color: This option consists of Default, Black, White, Red, Green, Blue, Yellow, Magenta, and Cyan. You can
change the background color of the caption. The default is Black.
• BG Opacity: This option consists of Default, Light, and Transparent. You can change the Background opacity of the
caption.
47
Features Parental Control
Adjustment of Parental Control
- The Parental control feature automatically looks out programs that are deemed inappropriate for children.
Parental Control
1. Change password
• Move to Parental control in the Features menu.
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
Change
MENU Return
Parental Control
• The message “Enter password” will appear. Enter
your 4 digit password
Note:
• The default password of a new TV set is “0-0-0-0”.
EnterEnglish
Password
Language
Caption
Menu Opacity
11
- - - -
MGDI Demonstration
Initialize
0~9 Enter
Move
Change
• Move to Change Password in the Parental Control
• Press the ”
” buttons to change the password.
MENU Return
MENU Return
Rating Status
Off
MPAA
TV-Rating
Can.English Rating
Can.French Rating
Change Password
Move
Change
MENU Return
Parental Control
Language
• The Change password screen will appear. Choose
any 4 digits for new password and enter them.
EnterEnglish
Password
Caption
Menu Opacity
New Password
- - - Cancel
0~9 Enter
OK
Move
Note:
• If you forget the password, you must call the Service Center.
48
- - - -
11
MGDI Demonstration Confirm
Initialize
Select
MENU Return
OK
OK
MENU Return
Features Parental Control
Adjustment of Parental Control
2. Rating Status
• Move to Rating Status in the Parental Control
• Select either On or Off by pressing the ”
”
buttons.
Rating Status
Off
MPAA
TV-Rating
Can.English Rating
Can.French Rating
Change Password
Move
3. MPAA
• Move to MPAA in the Parental Control and press the
”
” buttons.
Change
MENU Return
Rating Status
On
MPAA
TV-Rating
Can.English Rating
Can.French Rating
• The MPAA screen will appear.
” buttons to select the MPAA categories:
Press the ”
G: General audience
PG: Parental guidance
PG-13: Viewers 14 and over
R: Mature audience
NC17: No children under age 17
X: Adults only
NR: Not rated
• Press the “OK” button. Depending on your existing
setup, the “ “ symbol will be selected.
(blank = unblocked “ “ = Blocked)
Change Password
Move
Change
MENU Return
MPAA
PG
PG13
Parental Guidance Suggested
Parents Strongly Cautioned
Rested. under 17 must be accompanied by adult
NC17
No One 17 and Under Admitted
No One 17 and Under Admitted
NR
Move
Suitable for All Ages
OK
Not Rated by MPAA
OK
MENU Return
Note:
• The Parental Control will automatically block any categories that are “more restrictive”.
For example, if you block PG-13 category, then R, NC and X will automatically be blocked also.
49
Features Parental Control
Adjustment of Parental Control
4. TV Rating
• Move to Block and select Block to On.
• Move to TV Rating in the Parental Control and press the
”
” buttons.
• The TV Rating screen will appear.
Press the ”
” buttons to select one of the six aged
based categories:
Y: Young children
14: Viewers 14 and over
Y7: Children 7 and over
MA: Mature audience
G: General audience
PG: Parental guidance
• Press the “OK” button. Depending on your existing
setup, the “ “ symbol will be selected.
(blank = Unblocked “
Rating Status
On
MPAA
TV-Rating
Can.English Rating
Can.French Rating
Change Password
Move
Change
MENU Return
TV Rating
Children
Y7
FV
General
PG
14
MA
Allow All
Move
OK OK
MENU Return
“ = Blocked)
Note:
• The Y, Y7, G, PG, 14 and MA have additional options.
FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / S: Sexual situation / V: Violence
• The Parental Control will automatically block certain categories that are “more restrictive”. For example, if you block “Y”
category, then Y7 will automatically be blocked. Similarly, if you block the G category, then all the categories in the “young
adult” group will be blocked (G, PG, 14, and MA). The Sub-ratings (D, L, S, and V) work together similarly.
• Select on of these TV-Ratings(Y, Y7, G, PG, 14 and MA)
and press the ”
” buttons.
• Press the “OK” button to select the sub-rating.
TV Rating
Children
Y7
FV
General
PG
14
MA
Allow All
Move
OK OK
MENU Return
Note:
• The Parental Control will automatically block certain categories that are “more restrictive”. For example,
if you block “L” sub-rating in PG, then the L sub-rating in 14 and MA will automatically be blocked
50
Features Parental Control
Adjustment of Parental Control
5. Can. English Rating :
• Move to Can. English Rating in the Parental Control
and press the “
“ buttons.
• The Can. English Rating screen will appear.
Press the “VOL” buttons to select the Can. English
Rating categories: Press the EXIT button to exit.
C: Programming intended for children under age 8.
C8+: Programming generally considered
acceptable for children 8 years and over to
watch on their own.
G: General programming, suitable for all
audiences.
PG: Parental Guidance.
14+: Programming contains themes or content
which may not be suitable for viewers under
the age of 14.
18+: Adult programming.
• Press the “OK” button. Depending on your existing
setup, the “ “ symbol will be selected.
(blank = unblocked “ “ = Blocked)
Note:
The Parental Control will automatically block any
category that are “more restrictive” For example, if
you block G category, then PG, 14+ and 18+ will
automatically be blocked also.
51
Rating Status
On
MPAA
TV-Rating
Can.English Rating
Can.French Rating
Change Password
Move
Change
MENU Return
Can.English Rating
Exempt
Children under ages 8
C8+
PG
Children ages 8 and over
General
Parental Guidance Suggested
14+
Ages 14 and over
18+
Ages 18 and over
Allow All
Move
OK
OK
MENU Return
Features Parental Control
6. Can. French Rating :
• Can. French Rating in the Parental Control and press the
“ buttons.
“
• The Can. French Rating screen will appear.
“ buttons to select the Can. French Rating
Press the “
categories: Press the EXIT button to exit.
G: General
8 ans+ : Programming generally considered acceptable
for children 8 years and over to watch on their
own.
13 ans+: Programming may not be suitable for children
under the age of 13.
16 ans+: Programming is not suitable for children under
the age of 16.
18 ans+: Programming restricted to adults.
Rating Status
On
MPAA
TV-Rating
Can.English Rating
Can.French Rating
Change Password
Move
Change
MENU Return
• Press the “OK” button. Depending on your existing
setup, the “ “ symbol will be selected.
(blank = unblocked “ “ = Blocked)
Note:
The Parental Control will automatically block any
category that are “more restrictive” For example, if you
block 8 ans+ category, then 13 ans+, 16 ans+ and 18
ans+ will automatically be blocked also.
7. Downloadable RRT :
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
Parental restriction levels differ depending on the
broadcasting station.The default menu name and
Downloadable US rating changes depending on the
downloaded information. Even if you set the On-screen
display to your desired language, the “Downloadable
U.S. Rating” menu will appear in English only.
The rating will automatically block certain categories that
are more restrictive.
The rating titles (For example: Humor Level..etc) and TV
ratings (For example: DH, MH, H..etc) may differ
depending on the broadcasting station.
52
Can.French Rating
Exempt
For all
8ans+
Children ages 8 and up
13ans+
Teenagers 13 and up
16ans+
Teenagers 16 and up
18ans+
Adults 18 and up
Allow All
Move
OK
OK
MENU Return
Features - ETC
When viewing how MGDi improves the picture.
1. Setup of MGDi Demonstration
• Move to MGDi Demonstration in the Features menu.
• Press the ”
” buttons. In this demo version of
MGDi you can only see the functional difference of
ON/OFF, not the difference of quality of picture.
Parental Control
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
Change
MENU Return
Note:
• New technology, MGDi Demonstration, brings viewers more detailed,
clearer and more natural image with picture compensation algorithm.
• MGDi Demonstration is not available in PC and HDMI mode.
When adjusting the transparency of the menu screen
1. Setup of Menu Opacity
• Move to Menu Opacity in the Features menu.
• Adjust the translucent level of OSD background
by pressing the ”
” buttons.
Parental Control
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
Change
MENU Return
Selection of Language
1. Select Language
• Move to Language in the Features menu.
• Select your desired language by pressing the
”
” buttons. Then it will be setting automatically.
• The language change as the followed:
English => Español => Français => English
53
Parental Control
Language
English
Caption
Menu Opacity
11
MGDI Demonstration
Initialize
Move
Change
MENU Return
Time Setting
Adjustment of Time
1. Clock Menu
• Move to Clock mode in the Time menu.
• It can change ‘MANUAL’ , ‘AUTO’ by pressing
“ buttons.
“
Clock Mode
Current Time Set
Time Zone
DST
Auto
AM 12:00
Eastern
Auto
Sleep Timer
Off
On Timer
Off Timer
Move
2. Current Time Set
• Move to Current Time Set in the Time menu.
“
• To go to the Current Time Set, press the “
buttons.
• Place the cursor to AM / PM / Hour / Min. /
“ buttons.
Month / Day /Year. with “
• Set the AM / PM / Hour / Min. / Month / Day
“ buttons and then presses
/Year.with the “
the “MENU” button to complete.
Change
Clock Mode
Current Time Set
Time Zone
DST
MENU Return
Auto
AM 12:00
Eastern
Auto
Sleep Timer
Off
On Timer
Off Timer
Move
Change
MENU Return
Note :
1. Information of Auto Clock is required to DTV signal.
2.Current Time Set is available in MANUAL mode.
3. Time Zone
• Move to Time zone in the Time menu.
• Select the Time zone to desirable Time zone by
“ button.
pressing the “
• The Time zone change as the followed:
Central => Eastern => Atlantic => Hawaii =>
Alaska => Pacific => Mountain
Clock Mode
Current Time Set
Time Zone
DST
Auto
AM 12:00
Eastern
Auto
Sleep Timer
Off
On Timer
Off Timer
Move
54
Change
MENU Return
Time Setting
Adjustment of On Timer
4. Setting the On Timer / On Time / On CH / On
Volume
• Move to Wake Timer in the Time menu.
• Select the Wake Timer to "On" by pressing the ”
button.
Clock Mode
Auto
Current Time Set
Time Zone
AM 12:00
Eastern
DST
Auto
Sleep Timer
”
Off Timer
Move
• Move to Wake Time with the ”
” buttons.
• To go to Wake Time, press the ”
” buttons.
• Place the cursor to AM/PM / Hour / Min. with ”
”
buttons.
• Set the AM/PM / Hour / Min. with the ”
” buttons
and then press the “OK” and then press “MENU”
buttons.
Off
On Timer
Change
MENU Return
On Timer
On Timer
On
On Time Set
Time Input
Cable
On Timer Channel
On Timer Volume
Move
• Move to Wake CH. in the Time menu.
• Select the Wake CH. to desirable Channelby pressing
the ”
” buttons.
Change
20
MENU Return
On Timer
On Timer
On
On Time Set
Time Input
Cable
On Timer Channel
On Timer Volume
Move
• Move to Wake Vol. in the Time menu.
• Select the Wake Vol. to desirable Volume by pressing
the ”
” buttons.
Change
20
MENU Return
On Timer
On Timer
On
On Time Set
Time Input
On Timer Channel
Cable
On Timer Volume
Move
Change
20
MENU Return
Note:
• Confirm the Current Time is set. The Wake Timer is only available when the Current Time is set.
• The set will be turned on at selected time.
• If adjusted once, the Wake Time continues to operate everyday unless canceling setup or turn the AC power off.
55
Time Setting
Adjustment of Off Time
5. Setting DST
• Move to DST in the Time menu. and select On, Off with
”
” buttons.
Clock Mode
Current Time Set
Time Zone
DST
Auto
AM 12:00
Eastern
Auto
Sleep Timer
Off
On Timer
Off Timer
Note: Timezone and DST is available in Auto Clock mode
Move
Change
MENU Return
6. Setting the Sleep mode.
• By pressing the ”
” button on the remote control
repeatedly, you can select one of the following settings:
Sleep Timer: Off => 5 => 10 => 15 => 30 => 45 => 60 =>
90 => 120 => Off
• The set will turn off after the time you select.
Note:
• If an active signal is not present for about 30 minutes,
the set will automatically turn to Stand-by mode.
Clock Mode
Current Time Set
Time Zone
DST
Eastern
Auto
Sleep Timer
Off
On Timer
Off Timer
Move
56
Auto
AM 12:00
Change
MENU Return
Channel Banner
Channel Banner
- The channel banner displays information about a channel number, name,
broadcasting time, audio service and more. You can see this banner by pressing
“OK” button on the Remote Control.
DIGITAL
Strong
ABC News
4:00 PM
12:00 PM
9-1
ABC
D-1
1080i
5 Next Program : ABC Monie : Omega Man
16:9
DOLBY DIGITAL
ENGLISH
2007
Web. Dec 25
4:45 PM
1. General Information
Channel Mode: Display the current channel mode (Air/Cable/DTV).
Channel Number: Displays the current channel number.
Channel Name: Displays the current channel name. (Digital TV mode only)
Program Name: Displays the current program name. (Digital TV mode only)
Program information: Displays the current program information. (Digital TV mode only)
Program time: Display the current / next program time (start ~ end). (Digital TV mode only)
Icon: Displays the service items (Channel State, Screen Size, Audio Service, Dolby Digital, Favorite
Channel, and ETC) in the current program.
Note: Owing to our policy of continuous improvement, the availability of icon which depends upon
the program may change.
Current time: Displays the current time.
57
Channel Banner
Electronic Program Guide (EPG) (Digital TV mode only)
- The DTV Electronic Program Guide (EPG) displays program information
about each channel, up to seven days ahead.
- You can edit your own profiles, and record programs.
- By pressing the “GUIDE” button to access EPG directly, you can see all
channels broadcasting now.
Note:
• The EPG channel is only available when watching DTV channels.
1. Select a desired channel
• Select a channel with the ”
” buttons.
• Press the “GUIDE” button and move a program with the ”
buttons.
• If you need detail information, press the ”
” button.
”
Program Guide
12/06/2008 05:21 PM
Channels
Schedule
5-1 WNYW DT
05:00 PM The Tyra Banks Show
5-2 WNYW DT
06:00 PM Girlfriends
06:30 PM The Bernie Mac Show
07:00 PM The King of Queens
07:30 PM The King of Queens
08:00 PM IFL Battleground
10:00 PM My 9 News
11:00 PM The Bernie Mac Show
11:30 PM One on One
12:00 PM Malcolm in the Middle
Move
58
OK
Watch Channel
CH +/- Page Move
MENU Exit
Troubleshooting
Symptoms and Solutions
Please check the following items before asking for repair service.
Symptom
Neither picture
nor sound
Check items
- Check the contact of sockets is all right.
- Check the TV main power is on.
Picture is OK
but no sound
- Check the Volume control is set to minimum or mute.
Sound is OK, but
no color.
- Check the color control and adjust it properly.
- Check the program is in color and not in black & white.
The picture has
image.
- Check the antenna is installed correctly and if not, adjust the overlapped
antenna toward the broadcasting station.
Picture has “snow
noise”.
- Check the antenna or its connection is correct and if not, correct the
antenna fault or connection cable fault.
- Check if car traffic or neon sign disturbs the sound effect.
Stripes on
picture.
- Check the susceptible interference by other electronic devices such
as radio and television and keep magnetic or electronic devices
away from the TV.
Bad stereo or Dual
sound.
- Long distance from the station or other radio waves can generate
bad sound reception. If so, change the mode to Mono.
Remote control
does not
work.
- Check if the batteries in the Remote control are dead.
- Check if any object between IR sensor of the TV and the Remote
control does not obstruct.
POWER
MUTE
100
PREV. CH
59
Troubleshooting
In Digital TV mode
Some Problems will only occur when viewing DTV channels.
Due to the different techniques involved in digital reception, DTV signal quality can be poor even if you
appear to have a strong signal when viewing analog programs.
The DTV system requires a good quality signal to provide the best picture. When viewing analog pictures,
interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’, but still
provides a viewable picture. For the DTV system, Interference such as this can disrupt the flow of data
causing the picture to appear to be made up of large blocks, or to freeze intermittently. If the picture
disappears completely, this could mean that signal quality is very poor. If this happens often, you may need
to improve your aerial system to provide a better signal. This TV contains a complex microprocessor which
enables you to view enhanced digital services. Occasionally this device may need to be reset. This can be
done by pressing the stand-by button on your remote control or the power switch on the front panel.
SYMPTOM
No DTV Channels listed in the TV Guide after Auto Setup
Blocky interference.
Picture freezes intermittently.
CHECKS
Check that DTV transmissions are available from
the transmitter you are currently using. If not, try
directing the aerial at another local transmitter.
Check analog transmissions. If picture quality is
poor, you will need to improve or change your
aerial system to receive DTV channels. Consult a
local installer.
Blocky interference indicates that the signal
quality is poor.
You should consider improving your aerial
system.
To check the quality of your signal use the Signal
strength (See page 29)
In PC mode
SYMPTOM
“NO SIGNAL” appears on the screen.
“Not available” appears on the screen.
Image is not clear.
Image is not centered.
CHECKS
- Check the resolution and frequency of your PC.
Then, adjust them to optimum condition for LCD TV.
- Refer to the table of PC mode input format. (If
registered resolution and Frequency on the table no
listed then no picture will be displayed.)
- Ensure that the signal cable is firmly connected to PC
and TV.
- Adjust the PHASE control.
- Run the Auto setup.
• AFTER SALES SERVICE
Do not hesitate to contact your retailer or service agent if a change in the performance of your product
indicates that a faulty condition may be present.
60
Standard of
Product
Screen Size
LCD Panel
Dimension(W x H x D)
32”
37”
42”
42”(Full HD)
Aspect Ratio
16:9
16:9
Resolution
1366 x 768 (WXGA)
1920 x1080 (FHD)
Pixel Pitch
170.25 x 510.75 x RGB
0.200 x 0.600 mm x RGB
0.227 x 0.681 mm x RGB
0.4845 x 0.4845 mm x RGB
Set Dimension
806 x 626.5 x 230mm
940 x 720 x 328.5mm
1060 x 823 x 328mm
1060 x 823 x 328mm
Power Consumption
Marked on the back of the product
TV System
NTSC, ATSC
Power Source
110 ~ 220V, 60Hz
Owing to our policy of continuous improvement, specifications may change.
61
“GOLDEN WARRANTY”
Crosley Corporation warrants this product to be free from defects in material and workmanship and
agrees to repair or replace this product to remedy such defects.
This warranty covers TWO YEAR LABOR and TWO YEAR PARTS from the date of the original
purchase.
This warranty applies only to product purchased from an authorized Crosley dealer and used within
the boundaries of the U.S.A. and Canada.
This warranty does not apply to product that has been improperly installed, subjected to usage for
which the product was not designed, misused or abused, damaged during transportation, or which has
been altered or repaired in any way that affects the reliability or detracts from its performance.
How you get warranty service
Warranty service can only be provided by an authorized Crosley service center. For the closest
authorized service center to you, please contact your Dealer. In order to receive warranty service you
must provide the authorized service center with a copy of proof of purchase, signifying the date of
purchase and the name of the Dealer from whom you purchased the product.
Statutory warranties
The purchaser may have rights under existing provincial or federal laws, and where any terms of this
warranty are prohibited by such laws, they are deemed null and void, but the remainder of the
warranty shall remain in effect.
If you require further assistance, please contact the Crosley dealer or go to:
www.crosley.com to locate your nearest Crosley Distributor.
Crosley Corporation
111 Cloverleaf Drive, Suite 200
Winston-Salem, NC 27103
Service Call Toll Free Number: 1-877-393-7823

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Modify Date                     : 2008:09:04 15:38:43+09:00
Creator Tool                    :  QuarkXPress3.3k: LaserWriter 8 KH-8.7.3
Create Date                     : 2008:07:04 16:07:33+09:00
Metadata Date                   : 2008:09:04 15:38:43+09:00
Format                          : application/pdf
Creator                         : ¥Î
Title                           : S00E102 MANUAL
Document ID                     : uuid:03bd257e-4998-11dd-9d91-0016cb3acb6a
Instance ID                     : uuid:f09d3c5c-3e77-42fc-9326-5d3f83855205
Has XFA                         : No
Page Count                      : 31
Author                          : ¥Î
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C5FLA42L1

Navigation menu