WIREDTIME WT1000 WIRELESS CDMA BARCODE SCANNER WITH GPS AND VOICE User Manual wt1000 manual

WIREDTIME INC. WIRELESS CDMA BARCODE SCANNER WITH GPS AND VOICE wt1000 manual

UserManual.wiki >

WT1000 User Manual

Users Manual

           CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21

GPS M = 148CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM GPS M = 148CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD Replaceable scan lensNavigation buttonLarge colour displayW 38mm X L 49mmMicro USB/charging portLithium Ion batteryReplaceable 1300 mahReplaceable display cover Service indicatorlightProgrameable CCD scan engineL 1mm X W 60.5mm X D 31.8mmCompact size:180 g  Scroll downSelect and/or NextBack to previous screenScroll upScan          

    • Keep WT1000 scanner and charger clean and dry. • When not in use, it is recommended you leave the unit in the charger.• The charging port is located on the bottom of the scanner, pull back the top part of the plug, and insert charger.     GPS M = 148CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD Micro USB/charging port   To reset the scanner remove the battery retainer and slide the battery out part way, wait 10 seconds and re-insert the battery and retainer. Remove rubberbattery retainerSlide battery out part way,and wait 10 secondsRemove rubberbattery retainerSlide battery in, black side up,battery connectors top rightBattery connectors top right

   Scan1. Press and release the button.2. Adjust beam over ID barcode. Optimum scanning distance is 2-10cm depending on light conditions3. Scanner will beep and beam will turn off when barcode is read.4. Sending will be displayed at the bottom of the display.5. When sending is complete the scanner will “beep” and the ID name will be displayed6. The scanner is now set to your ID until a different ID barcode is scannedGUARDSmith, JohnProceed to scan all ‘check’ barcodes at the location as directed.Follow scanning instructions in Step 1.Front Door         

  011:21WiredTime OfficeWiredTime SupportCell PhonesMERCURY WiredTimeTMBACK SELECTWiredTimeMERCURY WiredTimeTMBACK SELECT011:21CALLING...15195703225WiredTimeMERCURY WiredTimeTMEND011:21WiredTime OfficeWiredTime SupportCell PhonesMERCURY WiredTimeTMBACK SELECT011:21Eric KellerTim BirkettGeorge DosmanMERCURY WiredTimeTMBACK SELECT011:21CALLING...15195703225Eric KellerMERCURY WiredTimeTMEND011:21WiredTime OfficeWiredTime SupportCell PhonesMERCURY WiredTimeTMBACK SELECT011:21WiredTimeMERCURY WiredTimeTMBACK SELECT011:21CALLING...15195703225WiredTimeMERCURY WiredTimeTMEND011:21CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21Scroll downSelect and/or NextBack to previous screenScroll upScanPush the ‘Down’ button until ‘CALL’ on the display is highlighted.Push the ‘Right’ button to select.Push the ‘Down and Up buttons the scroll trough the available phone groups.Push the ‘Down and Up buttons the scroll trough the available phone contacts.When the name of the call contact is highlighted push the ‘Right’ button to initiate the call.Push the ‘Right’ button to end the call.The display will return to the main menu.The WT1000 has a restricted phone function.Your personal Phone Book of numbers you are allowed to call will be downloaded to the scanner when you scan your ID Barcode.                  

    Unread MessageNew MessageRead MessageMERCURY WiredTimeTMBACK SELECT011:21No SMS MessageMERCURY WiredTimeTMBACK SELECT011:21Unread MessageNew MessageRead MessageMERCURY WiredTimeTMBACK SELECT011:21No SMS MessageMERCURY WiredTimeTMBACK SELECT011:21Unread MessageNew MessageRead MessageMERCURY WiredTimeTMBACK SELECT011:21Template 1Template 3Template 2MERCURY WiredTimeTMBACK SELECT011:21CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21Scroll downSelect and/or NextBack to previous screenScroll upScanThe WT1000 scanner can receive and send SMS text messages.New messages will automatically display on the screen, the message must be accepted or replied to before returning to the home screen or proceeding with any other actions.IF MORE THAN 1 MSG IS RECEIVED, oldest message will display 1st.When a message is received ‘MSG’ will flash on the main menu.Push the right button open the message feature.Unread Messages’ will be highlighted, push the right button to select.Push the Up and Down button to scroll through the available messages.When to message to be viewed is highlighted push the right button to open.       

   CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21GPS Tracking - OFFGPS DetailsMERCURY WiredTimeTMBACK SELECT011:21TURN ONTURN OFFMERCURY WiredTimeTMBACK SELECT011:21GPS Tracking - OFFGPS DetailsMERCURY WiredTimeTMBACK SELECT011:21LAT : 0.0MERCURY WiredTimeTMBACKLAT-1 : NLON : 0.0LON-1 : WDIR : 0SPEED : 0.0STAT : 0TIME : 0011:21Scroll downSelect and/or NextBack to previous screenScroll upScanThe WT1000 has GPS tracking capability built into the scanner.The GPS feature can be activated at anytime.   Push the ‘Down’ button until GPS is highlighted.Push the right button to select GPS.GPS tracking-Off is highlighted, push the right button to select.TURN ON is highlighted, push the right button to select.The display will return to the Main menu.Push the ‘Down’ button until GPS is highlighted.Push the right button to select GPS.GPS tracking-On is highlighted, push the right button to select.TURN OFF is highlighted, push the right button to select.The display will return to the Main menu.          Push the ‘Down’ button until GPS is highlighted.Push the right button to select GPS.Push the down button to until ‘GPS Details’ is highlighted, push the right button to select.Details of current GPS stats is displayed.Push the Left button to return to the Main menu.    

Push the Down button until MENU is highlighted.Push the right button to select the Menu feature.Push the down button until the required feature is highlighted.Push the right button to select.  The Menu feature is used to view current parameters of the WT1000.         CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21Turn off LCDScanner InfoAbout WiredTimeAdmin ModeMERCURY WiredTimeTMBACK SELECT011:21Turn off LCDScanner InfoAbout WiredTimeAdmin ModeMERCURY WiredTimeTMBACK SELECT011:21Delete Save ScanLockModem ProfileRestore DefaultMERCURY WiredTimeTMBACK SELECTActivate Modem011:21YesNoMERCURY WiredTimeTMBACK SELECT011:21Delete Save ScanLockModem ProfileRestore DefaultMERCURY WiredTimeTMBACK SELECTActivate Modem011:21YesNoMERCURY WiredTimeTMBACK SELECT011:21CONTINUE TO NEXT PAGEScroll downSelect and/or NextBack to previous screenScroll upScanTurn off LCD - Selecting this feature will turn off the dispaly.Admin Mode - Use Admin Mode to view and change scanner parametersDelete Saved Scans - Use this function to delete scans saved in memory.Restore Default - Use this function to restore the scanner to the default parameters.  

       CALLMSGGPSMENUSCANEMERGENCY PRESS AND HOLD MERCURY WiredTimeTM011:21ESN: F60C8A87MERCURY WiredTimeTMBACK SELECTIp1: 216.16.230.94Ip2: 216.16.230.94POT2: 80Mode: Real TimeScan: Single ScanGPS: YesLang: EnglishVer: 1.0.0.0011:21Turn off LCDScanner InfoAbout WiredTimeAdmin ModeMERCURY WiredTimeTMBACK SELECT011:21WIREDTIME.COM INC.MERCURY WiredTimeTMBACK SELECT5-350 Shirley Ave.,Kitchener, Ontario,Canada N2B2E1Phone: 519-570-3225Fax: 519-570-3096www.wiredtime.com011:21Turn off LCDScanner InfoAbout WiredTimeAdmin ModeMERCURY WiredTimeTMBACK SELECT011:21Scroll downSelect and/or NextBack to previous screenScroll upScanPush the Down button until MENU is highlighted.Push the right button to select the Menu feature.Push the down button until the required feature is highlighted.Push the right button to select.  The Menu feature is used to view current parameters of the WT1000.     Scanner Info - Use this function to view the current scanner settings.About WiredTime - Use this function to access WiredTime’s contact information.

Safety and General InformationRadiofrequency radiation exposure Information:For body worn operation, this phone has been tested and meets the FCC RF exposure guidelineswhen used with a WiredTime.com Inc. accessory holster designated for this product or when used with anaccessory that contains no metal and that positions the handset a minimum of 1 inch (2.5cm) from the body.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to turn off all electronic devices that transmit signals. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions.Antenna StatementUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.Licence exemptThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le onctionnement.Statement according FCC part 15.19This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Statement according FCC part 15.21Modifications not expressly approved by ,WiredTime.com Inc. couldvoid the user's authority to operate the equipment.Statement according FCC part 15.105NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

     WiredTime.com Inc350 Shirley Avenue, Unit 5Kichener, Ontario, CanadaN2B 2E1Phone: 1-866-570-3225For support:Call WiredTime at 1-866-570-3225Support available Monday to Friday from 9:00AM to 5:00PM EST.or email - tech@wiredtime.com