WITSLISM TECHNOLOGY T20WL1801 BLUETOOTH SPEAKER User Manual T20
WITSLISM TECHNOLOGY.,LIMITED BLUETOOTH SPEAKER T20
User manual
x1
x1
x1
1
2
What′s in the box
Thank you for choosing the T20S
Speaker as your source for
entertainment. You can use this item with iPad, iPhone, iPod
and many types of smart-phone to stream music and enjoy
hands-free calling. For the best results, please read this manual
before using the speaker.
Buttons
3Connections
5Hands-free 7LED Behavior
8
9
Warning
TWS connections: If you buy two T20S, then you can connect to
become a wireless stereo (TWS). Disconnect all the audio source
after power-on and switch to Bluetooth mode
. Put the two T20S
close to each other and the TWS pairing is done automatically.
After successful connected,
the left T20S
is the left channel and the
other one is the right channel. The left
channel of
T20S
’s Bluetooth
key is flash, right
channel
T20S’s
Bluetooth key steady light, using
mobile phone’s Bluetooth or Aux connected to the left
channel T20S,
you can enjoy the shocking of TWS. Put two units together again
that can clears the TWS connection.
6TWS Connect
Left Right
Step2: Leaning together
Step3: Complete the connection
4Bluetooth
Twinkle
R
Step1: Power on
T20 TWS Connect
Patent for invention : 201710856023.6
Induction connection / Easier and Faster !
BT Version 4.2
Driver 57mm*2
Output 20W@1%THD+N
SNR >85dB
Frequency range 80Hz-20KHz
Input voltage 5V
Input current 1.8A
Speaker/driver size 57mm 4Ω 10W
THD 0.32%
Battery 7.4V 2400mAh 17.76Wh 3C
Bluetooth distance >10m
TWS distance >5m
Playing time About 10 hours
Size 229x128.5*49 mm
Net weight 780 g
Technical Data
+
T20S
BLUETOOTH SPEAKER
T20S, T20
WITSLISM TECHNOLOGY.,LIMITED
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.