| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 118392 |
| Application ID | UEEYVkkJcUPvH2hvU98hYw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 123.72kB (1546515 bits) |
| Date Submitted | 2000-09-22 00:00:00 |
| Date Available | 2000-12-20 00:00:00 |
| Creation Date | 2000-07-21 16:18:54 |
| Document Lastmod | 2000-07-25 06:43:49 |
| Document Title | User Manual |
| Document Creator | HP 9100C Digital Sender |
WJ Broadband Fixed Wireless System
Transceiver Installation and Replacement
Instructions
Revision Date: July 21, 2000
To be used with all of the tollowlng Standard Power Transceivers:
sx11z1 MMDS Standard Power Point-to-Munipolnt Transcelver
SX1121A MMDS Standard Power Point-to-Multipoint Transceiver with Integrated Antenna
SX1123 MDSIMMDS Standard Puwer Point-to-Multlpolnt Transcelver
sx1123A MDSIMMDS Standard Power Polnt-to-Multlpolnt Transcelver wlth Integrated Antenna
sx11zsA UNII standard Power Polnt—to—Multlpelnt CPE Transceiver with Integrated Antenna
sx1127 UNII standard Power Point-to-Multipoint Head End Tranacalver
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
WJ Broadband Fixed Wireless System
Transceiver Installation and Replacement
Instructions
Product Numbers: SX1121, SX1121A, SX1123, SX1123A, SX1126A, SX1127.
This document explains how to install, remove, or replace the standard power wireless transceiver
component of a broadband fixed wireless system. It includes instructions for powering down the system,
removing an installed transceiver, and installing a new transceiver,
NOTE: Use this document in conjunction with the Cisca uBR 7200 Series Universal Broadband Router
Installation and Configuration Guide and Regulatory Compliance and Safiety Irformationfir the Cisco
uBR7200 Series Universal Broadband Router that shipped with your Cisco uBR7200 series router, and the
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and
Configuration document that shipped with your broadband fixed wireless modem card and subsystem.
This document includes the following sections:
0 If You Need More Information. page I
0 Wireless Transceiver Overview, page 2
0 Installation Prerequisites, page 3
0 Installing the Wireless Transceiver. page 9
o Removing and Replacing the Wireless Transceiver, page 16
0 Regulatory Compliance and Safety Information. page I9
0 Technical Support, page 23
If You Need More Information
To obtain general information about documentation, refer to the “Cisco Connection Online" section on page 23, or
call customer service at 800 553-6387 or 408 526-7208, Customer service hours are 5:00 am to 6:00 pm Pacific
time, Monday through Friday (excluding Cisco-olyserved holidays). You can also send e—mail to cs-rep@cisco.com.
or you can refer to the Ciseo Information Packet that shipped with your router,
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
Wireless Transceiver Overview
The wireless transceiver (ofien referred to as the outdoor unit or ODU) is the control and data interface to
the indoor router subsystems, It provides up/down conversion for [F to RF frequencies and power
amplification.
The wireless transceiver consists of the following components:
a RF head
a Connector port for IF input/ourqu control, and power
0 Connector port for antenna
Figure I shows three views of the common chassis used for the standard power Wireless Transceiveri A
description of the connectors shown here is listed in Table I.
Figure 1. Wireless Transceiver
Front View Front View with Integrated Antenna
Rear View
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
Table 1. Wireless Transceiver Connectors
Connector pe Input/Output Fun on
Antenna connector N-type weatherlzed (female) Input and Output Antenna connection
lF Input] Control/Power N-type weatherized (female) Input and Output Carries receive and transmit lF
signals, power, IF reference
frequency, and RF subsystem
control interface
Installation Prerequisites
This section provides a list of pans and tools you need to install, remove, or replace a wireless transceiver
at the antenna site. This section also includes safety and BSD-prevention guidelines to help you avoid
injury to yourself and damage to the equipment,
Parts and Tools
You need the following tools and pans to install, remove, or replace the transceiven If you need additional
equipment, contact a service representative for ordering information.
NOTE: Some N-type connectors require specific tools. Obtain this information from your cable supplier.
0 Wireless transceiver: SXl 12], 5X] 121A, SXl 123, SX1123A, SXl 126A or SXI 127.
0 Number 2 Phillips screwdriver
o Soldering iron/gun
o 9/16-inch open-end Wrench
0 Open-end adjustable Wrench
0 Cable wrap
- Antenna tools (refer to the antenna manufacturer‘s instructions)
- Mounting kit (provided with the new transceiver)
- Ground lug (provided in mounting kit)
0 50 ohm coaxial cable with N-type (male) connectors to cable the wireless transceiver to the antenna
0 Your own ESD-prevention equipment
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
Safety Guidelines
Following are safety guidelines that you should follow when working with any equipment that connects to
electrical power or telephone wiring.
Place picture of unit mounted to post and connected to antenna with RF cables
Place picture of unit mounted to wall and connected to antenna with RF cables
Place picture of unit with integrated antenna mounted to post and connected to RF cab/La)
Place picture of unit with integrated antenna mounted to wall and connected to RF
cables
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
Safety Warnings
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents To see translations of the wamings that appear in this
publication, refer to the “Regulatory Compliance and Safety Information” section in this document,
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die Iichamelijk
letsel kan veroorzakenl Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de hij
elektrische schakelingen betrokken risico‘s en dient u op de hoogte te zijn van standanrd maatregelen om
ongelukken te voorkomen. Voor venalingen van de waarschuwingen die in deze publicatie verschijnen,
kunt in het document Regulatory Compliance and Safety Information (lnformatie over naleving van
veiligheids- en andere voorschrifien) raadplegen dat bij dit toestel is ingesloten.
Varoitus Tamti varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan.
Ennen kuin tyoskentelet minkatin laitteiston parissa, ota selvtia sahkokytkentbihin Iiittyvista vaamista ja
tavanomaisista onnettomuuksien ehkaisykeinoista. Tsssa julkaisussa esiintyvien varoitusten kunnokset
ondat Iaitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (miiaraysten
noudattaminen ja tietoa turvallisuudesta).
Attention Ce symbols d'avertissement indique un dangeri Vous vous trouvez dans une situation pouvant
causer des hlessures ou des dommages corporels, Avant de travailler sur un équipement, soyez conscient
des dangers poses par les circuits électriques et familiarisez-vous avec les procedures couramment utilisées
pour éviter Ies accidents Pour prendre connaissance des traductions d’avertissements figurant dans cette
publication, consultez Ie document Regulatory Compliance and Safety Information (Confonnite aux
reglements et consignes de sécurité) qui accompagne cet appareil,
Warnung Dieses Wamsymbol bedeutet Gefahr. Sie befmden sich in einer Situation, die zu einer
Kisrperverletzung filhren konnte. Bevor Sie mit der Arbeit an irgendeinem Gerat beginnen, seien Sie sich
der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Verrneidung von
Unfillen bewuBt. fibersetzungen der in dieser Verofi'entlichung enthaltcnen Wamhinweise finden Sie im
Dokument Regulatory Compliance and Safety Information (lnformationen zu behordlichen Vorschrifien
und Sicherheit), das zusammen mit diesem Gerat geliefert wurde,
Avverlenn Questo simbolo di avvertenza indica un perieolo. La situazione ponebbe causare infortuni alle
persone. Prime di Iavorare su qualsinsi apparecchiatura. occorre conoscere i pericoli relativi ai circuiti
elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidentil La traduzione delle
avvertenze riportate in questa puhblicazione si trova nel documento Regulatory (“mop/fame fl’ldrs‘lZ/‘CW
Information (Conformita alle nonne e informazioni sulla sicurezza) che accompagna questo dispositivot
Advarsel Dette varselsymbolet betyr farel Du befinner deg i en situasjon som kan fare til personskade, For
du utforer arbeid pa utstyr, ma du vare oppmerksom pa de faremomentene som elekniske kretser
innebzrer, samt gime deg kjent med vanlig praksis nar det gielder a unnga ulykkeri Hvis du vil se
oversettelser av de advalslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory
Compliance and Safety Information (Overholdelse av forskrifier og sikkerhetsinfonnasjon) som ble levert
med denne enheten,
Aviso Este slmbolo de aviso indica perigo. Encontra-se numa situacao que lhe podera causar danos flsicos.
Antes de comecar a u'abalhar com qualquer equipamento, familiarize-se com 0s perigos relacionados com
circuitos eléctricos, e com quaisquer praticas comuns que possam prevenir posslveis acidentest Para ver as
u'adu96es dos avisos que constam desta publicacao, consulte o documento Regulatory Compliance and
Safety Information (lnfonnacao de Seguranca e Disposicoes Reguladoras) que acompanha este dispositivo,
iAdvertencin! tsre slmbolo de aviso significa peligro. Erlsu: rresgo para su tmchlt‘lad [isica Antes de
manipular cualquier equipo, considerar los riesgos que entrafia la corriente eléctrica y familiarizarse con los
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
pmoedimientos esfifindar dc prevencién de accidentesi Para ver una traduccién de las advenencias que
aparecen en esu publicacién, consultar el documento titulado Regulatory Compliance and Safely
Information (Infomacibn sohre seguridad y conformidad con las disposiciones reglamentarias) que se
acompafla con csle dispositivo,
Varning! Denna vamingssymbol signalerar fan. Du befinner dig i an situation som kan Ieda till
personskadai lnnan du utfir arbete pé nigon utrusming miste du vara medveten om famma med elkretsar
och kanna till vanligt flirfarande {hr at: flimbygga skador. Se fbrklaringar av de vamingar som fBrkommer i
denna publikalion i doknmenlel Regulatory Compliance and Safety lnformatian (Efierramlse av
threskrifier och sakerhetsinformation), vilket medfbljer denna anordning.
WJ Broadband Fixed Wireless System Transceiver Replacement Instructions
Electrical Equipment Guidelines
>>
Follow these basic guidelines when working with any electrical equipment:
0 Disconnect all power and extemal cables before moving a chassis,
0 Do not work alone if potentially hazardous conditions exist.
0 Never assume that power has been disconnected from a circuit; always check
a Do not perform any action that creates a potential hazard to people or makes the equipment unsafe,
- Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing safety grounds
Warning Do not locate the transceiver near overhead power lines or other electric light or power circuits,
or where it can come into contact with such circuits,
Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably
installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available.
Warning This equipment contains an energy hazard. Disconnect the system before servicing
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
WJ Broadband Fixed Wireless System Transceiver Replacement instructions
Table 2.
Warning Antenna 1nstallation Instructions: FCC RF Exposure Limits
The W] SXl 121 and SX1123 transceivers, used in conjunction with 18 and 24 dBi gain antennas, are to be
employed in point -to- multipoint applications only. The transceivers are either provided with an integral
antenna, or provided without an integral antenna. If the transceiver is provided without an integral antenna,
then antennas used for these transmitters shall be professionally installed on permanent structures for
outdoor operations The installer is responsible for ensuring that the systems using high-gain, directional
antennas are used exclusively for fixed, point-to—multipoint operations.
The installer shall mount all transmit antennas so as to comply with the limits for human exposure to radio
frequency (RF) fields per paragraph 1.1307 of the Federal Communications Commission (FCC)
Regulations. The FCC requirements incorporate limits for Maximum Permissible Exposure (MPE) in
terms of electric field strength, magnetic field strength, and power density.
The W] SX1121 and SX1123 transceivers are intended to be installed in customer premises areas. Table 2
below specifies the minimum distance that must be maintained between the antenna and any areas where
persons may have access, including roofiop walkways, sidewalks, as well as through windows and other
RF
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Creator : HP 9100C Digital Sender
Create Date : 2000:07:21 16:18:54
Author :
Producer :
Title :
Subject :
Modify Date : 2000:07:25 06:43:49-07:00
Page Count : 24
EXIF Metadata provided by EXIF.tools