| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 286183 |
| Application ID | Tq1y61zDigdZw59rhxbtGw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 138.2kB (1727446 bits) |
| Date Submitted | 2002-11-27 00:00:00 |
| Date Available | 2002-11-27 00:00:00 |
| Creation Date | 2001-01-19 19:56:19 |
| Producing Software | Acrobat PDFWriter 4.0 for Windows NT |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | NewManual_Porti_SC30.PDF |
| Document Creator | NewManual_Porti_SC30.doc - Microsoft Word |
| Document Author: | Administrator |
MODEL
PORTI-SC30
(PORTABLE PRINTER)
WOOSIM SYSTEM Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : +82-2-2107-3700
Fax : +82-2-2107-3707
URL http://www.woosim.com
All specifications are subjected to change without
notice
http://www.woosim.com
C op yri g ht
Porti-SC30 Portable printer user’s manual.
Copyright ⓒ2002 by Woosim System Inc.
All rights reserved.
The information contained in this manual is the property of Woosim
System Inc. and may not be reproduced in whole or in part without
the prior written permission of Woosim System Inc.
Trademark
a registered trademark of Woosim System Inc.
All other trademark are the properties of their respective companies.
Caution
Some semiconductor devices are easily damaged by static electricity. You
should turn the printer “OFF”, before you connect or removed the cable on
the rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer
“OFF”
Notice
The contents of this manual are subject to change without notice.
http://www.woosim.com
? Introd uction
The Porti-SC30 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing
etc.
The general features of Porti-SC30 printer are as follows:
? Pocket size(75.5 * 112 * 35mm)
? Light weight(340g) for true mobility.
? Very silent printing thru direct thermal printing method.
? High speed(50mm/sec)
? High resolution(203dpi : 8dots/mm).
? Magnetic Stripe Reader included.
? Easier paper loading by CLAMSHELL design.
? Support text and graphic printing.
? Serial(RS-232C) [or USB], IrDA , Ver 1.0(SIR) interface
? Easier maintenance with self-diagnostics.
http://www.woosim.com
? O p e rat i n g P r e c a u t i o n s
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
? Using the Printer
● Be careful not to drop or bump the printer on a hard surface. ●
Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows :
◆ Operating temperature : 0°
C to 40°
◆ Relative humidity : 10% to 80% (no condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not remove or reinstall the communication cable during printing
or transmission.
http://www.woosim.com
CONTENTS
1. Outline … … … … … … … … … … … … … … … … … … … … … .. 7
1.1. Model classifications … … … … … … … … … … .. 7
1.2. Specifications … … … … … … … … … … … … … … …
2. Setting up the printer … … … … … … … … … … … … … 9
2.1. Unpacking … … … … … … … … … … … … … … … … … . 9
2.2. Outer appearances and parts name … … … 10
2.3. Installing or replacing the paper roll … 12
2.4. Power connection … … … … … … … … … … … … .. 14
2.4.1.
Specified power supply … … … … … … 14
2.4.2.
Installation/Remove the battery pack
… … … … … … … … … … … … … … … … … … … … … … … … .. 14
2.5. Setting operation mode … … … … … … … … … . 16
3. Interface … … … … … … … … … … … … … … … … … … … … . 19
4. Using the printer … … … … … … … … … … … … … … … . 20
4.1. Control panel … … … … … … … … … … … … … … . 20
4.2. The self test … … … … … … … … … … … … … … … 21
5. Consumable Parts … … … … … … … … … … … … … … … 22
5.1. Recommended paper … … … … … … … … … … … . 22
5.2. Printing position … … … … … … … … … … … … .. 23
http://www.woosim.com
6. Print Control Function … … … … … … … … … … … … ..24
6.1. Print commands … … … … … … … … … … … … … … .26
6.2. Line spacing commands … … … … … … … … … … .28
6.3. Characters commands … … … … … … … … … … ..29
6.4. Panel button commands … … … … … … … … … ..36
6.5. Print position commands … … … … … … … … … .37
6.6. Bit-Image commands … … … … … … … … … … … … 50
6.7. Status commands … … … … … … … … … … … … … .55
6.8. Barcode commands … … … … … … … … … … … … .56
6.9. Macro function commands … … … … … … … … .60
6.10.Mechanism control commands … … … … … … .62
6.11.Miscellaneous function commands … … … ..64
7. Introduction of Protocol IrDA … … … … … … … … ..68
7.1. Frame structure … … … … … … … … … … … … … … 68
7.2. Process of printer status inquiry … … … … .69
7.3. Process of transmitting and receiving print
print data … … … … … … … … … … … … … … … … … … 70
7.4. Structure of print data frame … … … … … … .70
7.5. Structure of ENQ frame … … … … … … … … … ..72
Appendix … … … … … … … … … … … … … … … … … … … … … … ..73
http://www.woosim.com
1
Outline
1.1. Model classifications
Porti–SC30 (
Model name
Interface
S: Serial(RS-232C)
U: USB
Power
None : DC 7.4V
http://www.woosim.com
1.2. Specifications
Printing method
Direct thermal line printing
Characters per line
40cpl
Character size
9 * 24dots, 16 * 24dots (Korean characters)
Resolution
203dpi, 8dots/mm
Print width
2-inch (48mm, 384dots)
Printing speed
50mm / sec
Dimensions
75.5 * 112 * 35 mm (Standard model)
Weight
224g (Including battery & roll paper)
Interface
Serial(RS-232C) or USB, IrDA Ver1.0 (SIR) (Standard model)
Paper supplied
Thermal roll paper (57mm wide, 30ø)
PDF417(2-dimension), Code128, Code39, I12 / 5,
Barcode supplied
UPC, EAN, KAN, JAN, CODABAR
Receive buffer size
10K bytes
Printing speed may be slower, depending on the data
Note
transmission speed and the combination of control commands.
Battery
Rechargeable 7.4V DC 1.4A(Li-ion)
Battery duration
1 hour continuous printing
Input (85~240V AC 50~60Hz)
AC adapter
Output(8.6V DC), 4hours full charge time
Temperature
Environment conditions
0°
C - 40°
C (operating)
-10°
C - 50°
C (storage)
30% - 80% (operating)
Humidity
10% - 90% (storage)
Mechanical
37,000,000 lines
MCBF
Head
Approximately 50 Km
http://www.woosim.com
2 Setting up the printer
2.1.
Unpacking
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
PORTI_SC30
ROLL PAPER
USER’S MANUAL
http://www.woosim.com
2.2. Outer appearances and part name
2.3.
Dimensions
http://www.woosim.com
10
http://www.woosim.com
11
2.3. Installing or replacing the paper roll
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the
core because the printer cannot detect the paper end
correctly.
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper roll cover by applying your finger on both side of printer,
push it up when the lock is released as shown in the drawing.
3. Remove the used paper roll core if there is one.
4. Insert the paper roll as shown.
http://www.woosim.com
12
5, Be sure to note the correct direction that the paper comes off the roll.
6, Pull out a small amount of paper and then close the cover, as shown.
7. Tear off the paper as shown.
http://www.woosim.com
13
2.4. Power connection
2.4.1. Specified power supply
The following specifications is requested for Power supply.
VP : DC 7.4V Standby 80mA and Max 2A ( Standard model )
Avoid using power supply which its power capacity of power current is extremely high.
2.4.2. Installation / Remove the battery pack
NOTE : ● Before installing or removing the battery pack, turn the
Printer power off.
● If the Printer is not used for a long time, remove the battery
pack from the printer
① To install battery pack, proceed as follows:
- Insert the D/C Connector in the direction of the arrow.
WARNING
A wrong connection of connector in the battery connector could be damage the printer.
http://www.woosim.com
14
- Insert the Battery Cover with pushing in the direction of the arrow.
② To remove battery pack, proceed the above order reverse.
http://www.woosim.com
15
2.5. Setting operation mode
1.
Press the MODE Button until the Error Lamp twinkles 5 times
2.
Change the mode and option using the MODE Button according to the mode
Code(Table1)
?? FEED button : use for changing MODE status.
(Power Lamp )
?? MODE button : use for changing OPTION status. (Error Lamp )
[Example]
The defaults of the printer are : RS-232C/ 1,200 BPS/8 DATA BIT/ NO PARITY
/ DENSITY LOW
If a user wants to modify the defaults with Protocol IrDA/ 9,600 BPS/ 7 DATA BIT
/EVEN PARITY/ DENSITY HIGH
? Press MODE Button until Error Lamp twinkles 5 times
and release the button
? You will see the Power Lamp twinkles one time and the
Error Lamp twinkles 1 time
? Press the MODE Button one time and the Error Lamp twinkles twice
(The interface mode has set to Protocol IrDA mode)
? Press FEED button one time, Power Lamp twinkles twice and
Error Lamp twinkles 4 times
? Press MODE Button one time, Error Lamp twinkles 5 times and press the
MODE Button one more time, the Error Lamp twinkles 6 times
(The baud rate has set to 38,400 bps)
http://www.woosim.com
16
? Press FEED Button one time, Power Lamp twinkles 3 times
and Error Lamp twinkles 2 times
? Press MODE Button one time, Error Lamp twinkles one time
(The Data Bit has set to 7 data bit)
? Press FEED Button one time, Power Lamp twinkles 4 times and
Error Lamp twinkles 1 time.
? Press MODE Button one time, Error Lamp twinkles 2 times
(The Parity bit has set to even parity bit)
? Press FEED Button one time, Power Lamp twinkles 5 times and
Error Lamp twinkles 1 time
? Press MODE Button one time, Error Lamp twinkles 2 times after then
press MODE Button again, the Error Lamp will twinkle 3 times
( The density has set to High)
If all the mode have set, press the MODE Button and the FEED
Button at the same time after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(PROTOCOL IrDA/ 38,400 BPS/ 7 DATA BIT/ EVEN PARITY/ DENSITY HIGH)
If the status is not correct, please try it again according to the procedure.
http://www.woosim.com
17
Change Mode
POWER Lamp
MODE Lamp
(Green)
(Red)
Comunication
Port
Baud Rate
Data Bit
Parity Bit
Density
Not used
Option
RS-232C or USB
Protocol IrDA
Standard IrDA
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
9600 bps
7 Data bit
8 Data bit
No Parity
Even Parity
Odd Parity
Density Low
Density Medium
Density High
Not used
Not used
http://www.woosim.com
18
3 Interface
The Porti_SC30 printer has an RS232 serial, or USB interface and is connected by
means of a 4 pin mini USB socket. In the following table, the signals present on the
Mini USB socket are listed:
① Serial
Pin No.
Name
Direction
Function
TxD
Output
Transmit Data
RxD
Input
Receive Data
CTX
GND
Ground
② USB - Standard TypePin No.
Name
VCC
DATA “-“
DATA “+”
Ground
http://www.woosim.com
19
4 Using the printer
4.1. Control panel
? Button
- FEED Button :
Press the FEED button once to advance paper one line. You can also hold
down the FEED button to feed paper continuously.
- MODE Button :
MODE Button is for use to change communication mode.
(Refer to 2.5. Setting operation mode for details about mode conversion)
If you want to set to RS-232C Mode(Porti-sc30Serial version only ), just connect the
communication cable
to connector of the printer and then the mode will be changed automatically.
? Panel lamp
-POWER : The POWER lamp is on whenever the printer is on.
But when the battery is almost exhausted, this led flashes with red color occasionally.
In this case, you must recharge the battery by using the adapter.
-ERROR : This indicates an error such as paper end, or cover open, etc.
http://www.woosim.com
20
4.2. The self test
The self-test checks whether the printer has any problems. If the printer
does not function properly, contact your dealer. The self-test checks the following;
1. Make sure paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The self-test begins.
3. The self-test prints the current printer status, which provides the control ROM version and
the communication method setting.
4. After printing the current printer status, self-test printing will print a pattern using the
built-in character set.
5. The self-test automatically ends
The printer is ready to receive data as soon as it completes the self-test.
http://www.woosim.com
21
5 Consumable Parts
5.1 Recommended paper
Type
: Thermal Paper
Paper width
: 57mm
Paper thickness
: 65±5 Mm
Outer diameter
: Ø30mm or less
Recording side
: Outside of roll
Cautions
1. Do not paste the paper to the core. And the roll paper which has
Near end mark printing on its near end is recommended.
2.
Chemicals or oil may change the color of paper, or printed
Characters may fade.
3.
Change of paper color starts from approx 70 C.
Pay attention to heat, humidity and sun light.
4.
Color of paper may be changed by being scratched by nail or hard metal, etc
http://www.woosim.com
22
5.2 Printing position
http://www.woosim.com
23
6. Print Control Function
● Supported Commands List
Command
Name
Function Type
Page
HT
Horizontal tab
Print position
40
LF
Print and line feed
Print
26
FF
Print and return to standard mode
Print
27
Real-time status transmission
Status
35
EOT
Cancel card reader mode.
Magnetic card reader
63
ESC FF
Print data in page mode
Print
27
ESC SP
Set right-side character spacing
Character
30
ESC !
Select print mode
Character
31
ESC $
Set absolute print position
Print position
37
ESC *
Select bit-image mode
Bit image
50
ESC -
Turn underline mode on/off
Character
32
ESC 2
Select default line spacing
Line spacing
28
ESC 3
Set line spacing
Line spacing
28
ESC @
Initialize printer
Miscellaneous function
65
ESC D
Set horizontal tab positions
Print position
41
ESC E
Turn emphasized mode on/off
Character
33
ESC J
Print and feed paper
Print
26
ESC L
Select page mode
Miscellaneous function
65
ESC M C
Set 3track card reader mode
Magnetic card reader
63
ESC M D
Set 2track card reader mode
Magnetic card reader
63
ESC O
Set print starting position.
Print position
49
ESC R
Select an international character set
Character
30
ESC S
Select standard mode
Miscellaneous function
66
DLE EOT
EOT
http://www.woosim.com
24
Command
Name
Function Type
Page
ESC T
Select print direction in page mode
Print position
46
ESC W
Set printing area in page mode
Print position
44
ESC X 4
Define user-defined bit-image
Bit image
53
ESC \
Set relative print position
Print position
38
ESC Z
Print 2D barcode
Barcode
59
ESC a
Select justification
Print position
39
ESC c 5
Enable/disable panel buttons
Panel button
36
ESC d
Print and feed n lines
Print
27
ESC i
Partial cut (One point center uncut)
Mechanism control
62
ESC {
Turn upside-down printing mode on/off
Character
33
GS !
Select characters size
Character
34
Print position
47
Macro function
60
Character
35
Barcode
59
Set absolute vertical print position in
GS $
page mode
GS :
Start/end macro definition
Turn white/black reverse printing mode
GS B
On/off
Select printing position of HRI
GS H
characters
GS L
Set left margin
Print position
42
GS P
Set horizontal and vertical motion units
Miscellaneous function
62
GS V
Select cut mode and cut paper
Mechanism control
60
GS W
Set printing area width
Print position
43
Print position
48
Set relative vertical print position in
GS \
page mode
GS ^
Execute macro
Macro function
61
GS h
Set barcode height
Barcode
56
GS k
Print bar code
Barcode
57
GS w
Set barcode width
Barcode
56
http://www.woosim.com
25
6.1. Print Command
The PORTI-Series supports the following commands for printing character and advancing
paper:
C o m m an d
N am e
LF
Print and line feed
ESC J
Print and feed paper
ESC d
Print and feed n lines
FF
Print and return to standard mode(in page mode)
ESC FF
Print data in page mode
LF
[Name]
Print and line feed
[Format]
ASCII
LF
HEX
0A
Decimal
10
[Description]
Print the data in the print buffer and feeds one line based on the
current line spacing.
[Note]
This command sets the print position to the beginning of the line.
[Reference]
ESC 2, ESC 3
ESC J n
[Name]
Print and feed paper.
[Format]
ASCII
ESC
HEX
1B
4A
Decimal
27
74
[Range]
0 ≤ n ≤ 255
[Description]
Prints the data in the print buffer and feeds the paper [n x (vertical or horizontal
motion unit)] inches.
http://www.woosim.com
26
ESC d n
[Name]
Print and feed n lines
[Format]
ASCII
ESC
HEX
1B
64
Decimal
27
100
[Range]
0 ≤ n
≤ 255
[Description]
Prints the data in the print buffer and feeds n lines.
[Note]
1) This command sets the print starting position to the beginning of the line.
2) This command does not affect the line spacing set by ESC 2 or ESC 3.
[Reference]
ESC 2, ESC 3
FF
[Name]
Print and return to standard mode in page mode.
[Format]
ASCII
FF
HEX
0C
Decimal
12
[Description]
Prints the data in the print buffer collectively and returns to standard mode.
[Note]
1) The buffer data is deleted after being printed.
2) The Printing area set by ESC W is reset to the default setting.
3) This command sets the print position to the beginning of the line.
4) This command is enabled only in page mode.
[Reference]
ESC FF, ESC L, ESC S
ESC FF
[Name]
Print data in page mode.
[Format]
ASCII
ESC
FF
HEX
1B
0C
Decimal
27
12
[Description]
In page mode, prints all buffered data in the printing area collectively.
[Note]
This commands is enabled only in page mode.
After printing the printer does not clear the buffered data, setting values for ESC T
and ESC W, and the position for buffering.
[Reference]
FF, ESC L, ESC S
http://www.woosim.com
27
6.2. Line Spacing Command
The PORTI-Series supports the following commands for setting line spacing.
These
commands only set the line spacing; they do not actually advance the paper. The line spacing
set using these commands affects the results of LF and ESC d and paper feeding by using the
FEED button.
C o m m an d
N am e
ESC 2
Select default line spacing
ESC 3
Set line spacing
ESC 2
[Name]
Select default line spacing
[Format]
ASCII
ESC
HEX
1B
32
Decimal
27
50
[Description]
Selects 1/7 inch line (approximately 3.75mm) spacing.
[Note]
The line spacing can be set independently in standard mode and
in page mode.
[Reference]
ESC 3
ESC 3 n
[Name]
Set line spacing
[Format]
ASCII
ESC
HEX
1B
33
Decimal
27
51
[Range]
0 ≤ n ≤ 255
[Description]
Sets the line spacing to [n x vertical or horizontal motion until] inches.
[Note]
1) The line spacing can be set independently in standard mode and in page mode.
2) The horizontal and vertical motion unit are specified by GS P.
Changing the horizontal or vertical motion unit does not affect the current line
spacing.
http://www.woosim.com
28
3) The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum vertical movement amount,
and it must be in even units of the minimum vertical movement amount.
4) In standard mode, the vertical motion unit (y) is used.
5) In page mode, this command functions as follows, depending on the starting
position of the printable area:
When the starting position is set to the upper left or lower right of the printable area
using ESC T, the vertical motion unit(y) is used. When the starting position is set to
the upper right or lower left of the printable area using ESC T, the horizontal motion
unit(x) is used.
[Reference]
ESC 2, GS P
6.3. Character Commands
The PORTI-Series supports the following commands for setting character font and size:
C o m m an d
N am e
ESC SP
Set right-side character spacing
ESC R
Select an international character set
ESC !
Select print mode
ESC -
Turn underline mode on/off
ESC E
Turn emphasized mode on/off
ESC G
Turn double-strike mode on/off
ESC {
Turn upside-down
GS !
Select character size
GS B
Turn white/black reverse printing mode on/off
http://www.woosim.com
29
ESC SP n
[Name]
Set right-side character spacing.
[Format]
ASCII
ESC
SP
HEX
1B
20
Decimal
27
32
[Range]
0 ≤ n ≤ 255
[Description]
Sets the character spacing for the right side of the character to [n x horizontal or
vertical motion units] inches.
[Note]
1) The right side character spacing for double-width mode is twice the normal
value. When characters are enlarged, the right side character spacing is n times
normal value.
2) This command sets values independently in each mode.
3) The horizontal and vertical motion unit are specified by GS P. Changing the
horizontal or vertical motion unit does not affect the current right-side spacing.
4) The maximum right side spacing if 255/180 inches, Any setting exceeding
the maximum is converted to the maximum automatically.
[Default]
n=0
[Reference]
GS P
ESC R n
[Name]
Select an international character set.
[Format]
ASCII
ESC
HEX
1B
52
Decimal
27
82
[Range]
0 ≤ n ≤ 10
[Description]
Selects an international character set n from the following table.
http://www.woosim.com
30
[Default]
Character set
Character set
U.S.A
Sweden
France
Italy
Germany
Spain
U.K
Norway
Denmark
10
Denmark II
n=0
ESC ! n
[Name]
Select print mode.
[Format]
ASCII
ESC
HEX
1B
21
Decimal
27
33
[Range]
0 ≤ n ≤ 255
[Description]
Select print mode(s) using n as follows,.
Bit
Off / On
Hex
Decimal
Function
Off
00
Character font A (12 x 24)
On
01
Character font B (9 x 24)
Off
Undefined
On
Undefined
Off
Undefined
On
Undefined
Off
00
Emphasized mode not selected
On
10
Emphasized mode selected
Off
00
Double-height mode not selected
On
20
Double-height mode selected
Off
00
Double-width mode not selected
On
20
Double-width mode selected
Off
Undefined
On
Undefined
Off
00
Underline mode not selected
On
80
128
Underline mode selected
http://www.woosim.com
31
[Note]
1) When both double-height and double-width modes are selected, quadruple size
characters are printed.
2) The printer can underline all characters, but can not underline the space set by
HT.
3) The thickness of the underline is that selected by ESC -, regardless of the
character size.
4) When some characters in a line are double or mode height, all the characters on
the line are aligned at the baseline.
5) ESC – can also turn on or off underline mode. However, the setting of the last
received command is effective.
7) GS ! can also select character size. However, the setting of the last received
command is effective.
[Reference]
ESC -, ESC E, GS!
ESC - n
[Name]
Turn underline mode on/off
[Format]
ASCII
ESC
HEX
1B
2D
Decimal
27
45
[Range]
0 ≤ n ≤ 1
[Description]
Turns underline mode on or off, based on the following values of n;
Function
0, 48
Turns off underline mode
1. 49
Turns on underline mode (1 dot thick).
2, 50
Turns on underline mode (2 dot thick)
[Notes]
1) The printer can underline all characters (including right-side character spacing),
but cannot underline the space set by HT.
2) The printer cannot underline white/black inverted characters.
3) When underline mode id turned off by setting the value of n to 0 or 48, the
http://www.woosim.com
32
following data is not underlined, and the underline thickness set before the mode is
turned off does not change. The default underline thickness is 1 dot.
4) Changing the character size does not affect the current underline thickness.
5) Underline mode can also be turned on or off by using ESC !.
Note, however, that the last received command is effective.
[Default]
n=0
[Reference]
ESC !
ESC E n
[Name]
Turn emphasized mode On/Off.
[Format]
ASCII
ESC
HEX
1B
45
Decimal
27
69
[Range]
0 ≤ n ≤ 255
[Description]
Turns emphasized mode on of off.
When the LSB(least significant bit) is 0, emphasized mode is turned off.
When the LSB(least significant bit) is 1, emphasized mode is turned on.
[Note]
1) Only the least significant bit of n is enabled.
2) This command and ESC ! turn on and off emphasized mode in
the same way. Be careful when this command is used with ESC !
[Default]
n=0
[Reference]
ESC !
ESC { n
[Name]
Turn On/Off upside-down printing mode
[Format]
ASCII
ESC
HEX
1B
7B
Decimal
27
123
[Range]
0 ≤ n ≤ 255
[Description]
Turns upside-down printing mode on of off
When the LSB is 0, upside-down mode is turned off.
When the LSB is 1, upside-down mode is turned on.
http://www.woosim.com
33
[Note]
1) Only the lowest significant bit of n is valid.
2) This command is enabled only when processed at the beginning of a line in
standard mode.
3) When this command is input in page mode, the printer performs only internal flag
operations.
4) This command does not affect printing in page mode.
5) In upside-down printing mode, the printer rotates the line to be
printed by 180 degree and then prints it.
[Default] n = 0
[Example]
GS ! n
[Name]
Select character size
[Format]
ASCII
GS
HEX
1D
21
Decimal 29
33
[Range]
0 ≤ n ≤ 255
[Description]
(1 ≤ vertical number of times ≤ 8, 1 ≤ horizontal number of times ≤ 8)
Selects the character width using bits 0 to 2 and selects the character height using
bits 4 to 7, as follows;
http://www.woosim.com
34
Hex
Decimal
Width
Hex
Decimal
Height
00
1 (normal)
00
1 (normal)
01
2 (double width)
10
16
2 (double height)
02
20
32
03
30
48
04
40
64
05
50
80
06
60
96
07
70
112
Character Height Selection
Character Width Selection
[Notes]
1) This command is all characters effective
2) If n is outside of the defined range, this command is ignored.
3) In standard mode, the vertical direction is the paper feed direction, and the
horizontal direction is perpendicular to the paper feed direction.
4) In page mode, vertical and horizontal directions are based on the character
orientation.
5) When characters are enlarged with different sizes on one line, all the characters
on the line are aligned at the baseline.
6) The ESC ! command can also turn double width and double height modes on or
off.
[Default]
n=0
[Reference]
ESC !
GS B n
[Name]
Turn white/black reverse printing mode On/Off.
[Format]
ASCII
GS
HEX
1D
42
Decimal
29
66
[Range]
0 ≤ n ≤ 255
[Description]
Turns on or off White/Black reverse printing mode.
http://www.woosim.com
35
[Notes]
1) When the LSB is 0, white/black reverse printing mode is turned on.
2) When the LSB is 1, white/black reverse printing mode is turned off.
3) Only the lowest bit of n is valid.
4) This command is available for built in characters and user defined characters.
5) When white/black reverse printing mode is on, it also applied to character
spacing set by ESC SP.
6) This command does not affect the space between lines.
7) White/black reverse mode has a higher priority than underline mode. Even if
underline mode is on, it is disabled (but not canceled) when white/black reverse
mode is selected.
[Default] n = 0
6.4. Panel Button Command
The PORTI-Series supports the following command for enabling and disabling the panel
button.
C o m m an d
N am e
ESC c 5
Enable/disable panel buttons
ESC c 5 n
[Name]
Enable/Disable panel buttons
[Format]
ASCII
ESC
HEX
1B
63
35
Decimal
27
97
53
[Range]
0 ≤ n
≤ 255
[Description]
Enables or disables the panel buttons.
When the LSB is 0, the panel buttons are enabled.
When the LSB is 1, the panel buttons are disabled.
[Notes]
1) Only the least significant bit of n is valid.
http://www.woosim.com
36
2) When the panel buttons are disabled, none of them are usable when the printer
cover is closed.
3) In this printer, the panel buttons is the FEED button.
4) In the macro ready mode, the FEED button are enabled regardless of the settings
of this command; however, the paper cannot be fed by using these buttons.
[Default]
n=0
6.5. Print Position Commands
The PORTI-Series supports the following commands for setting the print position
C o m m an d
N am e
ESC $
Set absolute print position
ESC \
Set relative print position
ESC a
Select justification
HT
Horizontal tab
ESC D
Set horizontal tab positions
GS L
Set left margin
GS W
Set printing area width
ESC W
Set printing area in page mode
ESC T
Select print direction in page mode
GS $
Set absolute vertical print position in page mode
GS \
Set relative vertical print position in page mode
ESC O
Set print starting position.
ESC $ nL nH
[Name]
Set absolute print position
[Format]
ASCII
ESC
nL
nH
HEX
1B
24
nL
nH
Decimal
27
36
nL
nH
[Range]
0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
http://www.woosim.com
37
[Description]
Set the distance from the beginning of the line to the position at which subsequent
characters are to be printed.
[Notes]
1) The distance from the beginning of the line to the print position is [(nL +
nH x 256) x (vertical or horizontal motion unit)] inches.
2) Setting outside the specified printable area are ignored.
3) The horizontal and vertical motion unit are specified by GS P.
4) The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal movement
amount, and it must be in even units of he minimum horizontal movement amount.
5) In standard mode, the horizontal motion unit (x) is used.
6) In page mode, horizontal or vertical motion unit differs depending on the
starting position of the printable area as follows;
1. When the starting position is set to the upper left or lower right
of the printable area using ESC T, the horizontal motion unit (x) is
used.
2. When the starting position is set to the upper right or lower left of the
printable area using ESC T, the vertical motion unit (y) is used.
[Reference]
ESC\, GS$, GS\, GS P
ESC \ nL nH
[Name]
Set relative print position
[Format]
ASCII
ESC
nL
nH
HEX
1B
5C
nL
nH
Decimal
27
92
nL
nH
[Range]
0 ≤ nL ≤ 255,
0 ≤ nL ≤ 255
[Description]
Set the print starting position based on the current position by using
[Notes]
1) This command sets the distance from the current position to [(nL+nHx256) x
horizontal or vertical motion unit]
http://www.woosim.com
38
2) Any setting that exceeds the printable are is ignored
3) When pitch N is specified to the right; nL + nH x 256 = N
When pitch N is specified to the left (the negative direction), use the complement of
65536.
4) The print starting position moves from the current position to [N x horizontal or
vertical motion unit)]
5) The horizontal and vertical motion unit are specified by GS P.
6) The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal movement amount,
and it must be in even units of the minimum horizontal movement amount.
7) In standard mode, the horizontal motion unit is used.
8) In page mode, the horizontal or vertical unit differs as follows, depending on the
starting point of the printing area;
When the starting position is set to the upper left or lower right of the printable area
using ESC T, the horizontal motion unit (x) is used. When the starting position is set
to the upper right or lower left of the printable area using ESC T, the vertical motion
unit (y) is used.
[Reference]
ESC $, ESC P
ESC a n
[Name]
Select justification
[Format]
ASCII
ESC
HEX
1B
61
Decimal
27
97
[Range]
0 ≤n ≤ 2
48 ≤ n ≤ 50
[Description]
Aligns all the data in one line to the specified position. n selects the type of
justification as follows;
0, 48
1, 49
2, 50
Justification
Left justification
Center justification
Right justification
http://www.woosim.com
39
[Notes]
1) The command is enabled only when processed at the beginning of the line in
standard mode.
2) If this command is input in page mode, the printer performs only internal flag
operations.
3) This command has no effect in page mode.
4) This command executes justification in the printing area.
5) This command justifies the space area according to HT, ESC $ or ESC \
[Default]
n=0
[Example]
HT
[Name]
Horizontal Tab
[Format]
ASCII
HT
HEX
09
Decimal
[Description]
Moves the print position to the next horizontal tab position.
[Note]
1) This command is ignored unless the next horizontal tab position has been set.
2) If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1]
3) Horizontal tab positions are set with ESC D.
4) If this command is received when the printing position is at [Printing area width
+ 1], the printer executes print buffer-full printing of the current line and horizontal
tab processing from the beginning of the next line.
5) The default setting of the horizontal tab position for the paper roll is every 0th
character.
[Reference]
ESC D
http://www.woosim.com
40
ESC D n1… nk NUL
[Name]
Set horizontal tab positions.
[Format]
ASCII
ESC
n1… nk
NUL
HEX
1B
44
n1… nk
00
Decimal
27
68
n1… nk
[Range]
1 <= n <= 255
0 <= k <=32
[Description]
Set horizontal tab position
[Notes]
1) n specifies the column number for setting a horizontal tab position from the
beginning of the line.
2) k indicates the total number of horizontal tab positions to be set.
3) The horizontal tab position is stored as a value of [character width x n] measured
from the beginning of the line. The character width includes the right-side character
spacing, and double-width characters are set with twice the width of normal
characters.
4) This command cancels the previous horizontal tab settings.
5) When setting n=8, the print position is moved to column 9 by sending HT.
6) Up to 32 tab positions (k=32) can be set. Data exceeding 32 tab positions is
processed as normal data.
7) Transmit [n]k in ascending order and place a NUL code 0 at the end.
8) When [n]k is less than or equal to the preceding value [n]k-1, tab setting is
finished and the following data is processed as normal data.
9) ESC D NUL cancels all horizontal tab positions.
10) The previously specified horizontal tab positions do not change, even if the
character width changes.
11) The character width is memorized for each standard and page mode.
[Default]
The default tab positions are at intervals of 0 characters.
[Reference]
HT
http://www.woosim.com
41
GS L nL nH
[Name]
Set left margin.
[Format]
ASCII
GS
nL
nH
HEX
1D
4C
nL
nH
Decimal
29
76
nL
nH
[Range]
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Description]
Set the left margin using nL and nH.
[Notes]1)
The left margin is set to [(nL+nHx256)] x (horizontal motion unit) inches.
2) This command is effective only processed at the beginning of the line in standard
mode.
3) If this command is input in page mode, the printer performs only internal flag
operations.
4) This command does not affect printing in page mode.
5) If the setting exceeds the printable area, the maximum value of the printable area is
used.
6) The horizontal and vertical motion units are specified by GS P.
Changing the horizontal and vertical motion unit does not affect the current left
margin.
7) The horizontal motion unit (x) is used for calculating the left margin.
The calculated result is truncated to the minimum value of the mechanical pitch.
[Default]
nL = 0, nH = 0
[Reference]
GS P, GS W
http://www.woosim.com
42
GS W nL nH
[Name]
Set printing area width
[Format]
ASCII
GS
nL
nH
HEX
1D
57
nL
nH
Decimal
29
87
nL
nH
[Range]
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Description]
Sets the printing area width to the area specified by nL and nH.
[Notes]
1) The printing area width is set to [(nL+nHx256)] x horizontal motion unit inches.
2) This command is effective only processed at the beginning of the line.
3) In page mode, the printer performs only internal flag operations.
4) This command does not affect printing in page mode.
5) If the [left margin + printing area width] exceeds the printable area, (printable
area width - left margin) is used.
6) The horizontal and vertical motion units are specified by GS P.
Changing the horizontal and vertical motion units does not affect the current left
margin.
7) The horizontal motion unit (x) is used for calculating the printing area width.
The calculated result is truncated to the minimum value of the mechanical pitch.
8) If the width set for the printing area is less than the width of one character, when
the character data is developed, the following
If the printing area width cannot be extended sufficiently, the left margin is reduced
to accommodate one character.
http://www.woosim.com
43
If the printing area width cannot be extended sufficiently, the right space is
reduced.
9) If the width set for the printing area is less than one line in vertical, the
following processing is performed only on the line in question when data
other than character data(e.g., bit image, user defined bit image) is
developed:
The printing area width is extended to the right to accommodate one line in
vertical for the bit image within the printable area. If the printing area width
cannot be extended sufficiently, the left margin is reduced to accommodate one line
in vertical.
[Default]
nL = 0, nH = 2
[Reference]
GS L, GS P
ESC W xL xH yL yH dxL dxH dyL dyH
[Name]
Set printing area in page mode
[Format]
ASCII
ESC
xL
HEX
1B
57
xL xH yL yH dxL dxH dyL dyH
Decimal
27
87
xL
[Range]
xH
xH
yL
yL
yH
yH
dxL
dxL
dxH
dxH
dyL
dyL
dyH
dyH
0 ≤ xL,xH,yL,yH,dxL,dxH,dyL,dyH ≤255
(except dxL=dxH=0 or dyL=dyH=0)
[Description]
The horizontal starting position, vertical starting position,
printing area width, and printing area height are defined as
x0, y0, dx(inch), respectively.
x0 = [(xL + xH * 256)] * (horizontal motion unit)
y0 = [(yL +yH * 256)] * (vertical motion unit)
dx = [(dxL + dxH x 256)] x (horizontal motion unit)
http://www.woosim.com
44
dy = [(dyL + dyH * 256)] * (vertical motion unit)
The printing area is set as shown in the figure below.
[Note]
1) If this commands is input in standard mode, the printer executes only internal flag
operation. This command does not affect printing in standard mode.
2) If the horizontal or vertical starting position is set outside the printable area, the
printer stops command processing and processes the following data as normal data.
3) If the printing area width or height is set to 0, the printer stops command
processing and processes the following data as normal data.
4) This command sets the position where data is buffered to the position specified
by ESC T within the printing area.
5) If (horizontal starting position + printing area width) exceeds the printable area,
the printing area width is automatically set to (horizontal printable area - horizontal
starting position).
6) If (vertical starting position + printing area height) exceeds the printable area, the
printing area height is automatically set to (vertical printable area-vertical starting
position).
7) The horizontal and vertical motion unit are specified by GS P. Changing the
horizontal or vertical motion unit does not affect the current printing area.
8) The GS P command can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum horizontal movement amount,
and it must be in even units of minimum horizontal movement amount.
9) Use the horizontal motion unit (x) for setting the horizontal starting position and
printing area width, and use the vertical motion unit (y) for setting the vertical
starting position and printing area height.
10) When the horizontal starting position, vertical starting position, printing area
width, and printing area height are defined as X, Y, Dx, Dy respectively, the
printing area is set as shown in the figure below.
http://www.woosim.com
45
[Default]
xL = xH = yL = yH = 0
dxL = 0, dxH = 2, dyL = 126, dyH = 6
[Reference]
CAN, ESC L, ESC T, GS P
ESC T n
[Name]
Select print direction in page mode
[Format]
ASCII
ESC
HEX
1B
54
Decimal
27
84
[Range]
0 ≤ n ≤ 3 or 48 ≤ n ≤51
[Description]
Selects the print direction and starting position in page mode.
n specifies the print direction and starting position as follows;
Print
Starting position
direction
0,48
1,49
2,50
3,51
Left to
Upper left
right
(A in the figure)
Bottom to
Lower left
top
(B in the figure)
Right to
Lower right
left
(C in the figure)
Top to
Upper right
bottom
(D in the figure)
http://www.woosim.com
46
[Notes]
1) When the command is input in standard mode, the printer executes only internal
flag operation. This command does not affect printing in standard mode.
2) This command sets the position where data is buffered within the printing area
set by ESC W.
3) Parameters for horizontal or vertical motion units (X or Y) differ as follows,
depending on the starting position of the printing area;
If the starting position is the upper left or lower right of the printing area, data is
buffered in the direction perpendicular to the paper feed direction.
Commands using horizontal motion unit: ESC SP, ESC $, ESC \
Commands using vertical motion unit: ESC 3, ESC J, GS $, GS \
If the starting position is the upper right or lower left of the printing area, data is
buffered in the paper feed direction.
Commands using horizontal motion units : ESC 3, ESC J, GS $,GS \
Commands using vertical motion units : ESC SP, ESC $, ESC \
[Default]
n=0
[Reference]
ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \
GS $ nL nH
[Name]
Set absolute vertical print position in page mode.
[Format]
ASCII
GS
nL
nH
HEX
1D
24
nL
nH
Decimal
29
36
nL
nH
[Range]
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Description]
Sets the absolute vertical print starting position for buffer character data in page
mode.
[Notes]
1) This command sets the absolute print position to [(nL+nHx256)]x (vertical or
horizontal motion unit) inches.
2) This command is effective only in page mode.
3) If the [(nL+nHx256)] x (vertical or horizontal motion unit) exceeds the specified
printing area, this command is ignored.
4) The horizontal starting buffer position does not move.
http://www.woosim.com
47
5) The reference starting position is that specified by ESC T.
6) This command operates as follows, depending on the starting position of the
printing area specified by ESC T; When the starting position is set to the upper left
or lower right, this command sets the absolute position in the vertical direction.
When the starting position is set to the upper right or lower left, this command sets
the absolute position in the horizontal direction.
7) The horizontal and vertical motion unit are specified by GS P.
8) The GS P command can change the horizontal and vertical motion unit.
However, the value cannot be less than the minimum horizontal movement amount,
and it must be in even units of the minimum horizontal movement amount.
[Reference]
ESC $, ESC T, ESC W, ESC \, GS P, GS \
GS \ nL nH
[Name]
Set relative vertical print position in page mode
[Format] ASCII
GS
nL
nH
HEX
1D
5C
nL
nH
Decimal
29
92
nL
nH
[Range]
0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description]
Sets the relative vertical print starting position from the current position in page
mode.
[Notes]
1) This command sets the distance from the current position to [(nL + nHx256)] x
vertical or horizontal motion unit inches.
2) This command is ignored unless page mode is selected.
3) When pitch N is specified to the movement downward;
nL + nHx256 = N
When pitch N is specified to the movement upward (the negative direction), use the
complement of 65536.
When pitch N is specified to the movement upward;
nL + nH x 256 = 65536 - N
http://www.woosim.com
48
4) Any setting that exceeds the specified printing area is ignored.
5) This command function as follows, depending on the print
starting position set by ESC T;
When the starting position is set to the upper left or lower right
of the printing, the vertical motion unit (y) is used.
When the starting position is set to the upper right or lower left
of the printing, the horizontal motion unit (x) is used.
6) The horizontal and vertical motion unit are specified by GS P.
7) The GS P command can change the horizontal (and vertical)
motion unit. However, the value cannot be less than the minimum
horizontal movement amount, and it must be in even units of the
minimum horizontal movement amount.
[Reference]
ESC $, ESC T, ESC W, ESC \, GS $, GS P
ESC O xL xH yL yH
[Name]
Set print starting position.
[Format]
ASCII
ESC
xL xH
yL
yH
HEX
1B
4F
xL
xH
yL
yH
Decimal
27
79
xL
xH
yL
yH
[Description]
Set horizontal starting position and vertical starting position.
Horizontal starting position = (xL + xH * 256) * (horizontal motion unit)
Vertical starting position = (yL + yH * 256) * (vertical motion unit)
http://www.woosim.com
49
6.6. Bit-Image Commands
The PORTI-Series supports the following bit-image command.
C o m m an d
N am e
ESC *
Select bit image mode
ESC X 4
Define user-defined bit image
ESC * m nL nH d1 dk
[Name]
Select bit-image mode.
[Format]
ASCII
ESC
nL
nH
d1… dk
HEX
1B
2A m
nL
nH
d1… dk
Decimal
27
42 m
nL
nH
d1… dk
[Range]
m = 0,1,32,33
0 ≤ nL ≤ 255
0 ≤ nH ≤ 3
0 ≤ d ≤ 255
[Description]
Selects a bit-image mode using m for the number of dots specified by nL and nH, as
follows:
Vertical direction
mode
Number
Dot density
Horizontal direction
Dot density
Number of Data
of Dots
8 dot single
60 DPI
90 DPI
nL+nHx256
8 dot double
60 DPI
180 DPI
nL+nHx256
32
24 dot single
24
180DPI
90 DPI
(nL+nHx256)x3
33
24 dot double
24
180 DPI
180 DPI
(nL+nHx256)x3
[Notes]
1) If the values of m is out of the specified range, nL and data following are
processed an normal data.
2) The nL and nH indicate the number of dots of the bit image in the horizontal
direction.
3) The number of dots is calculated by nL + nH x 256.
http://www.woosim.com
50
4) If the bit-image data input exceeds the number of dots to be printed on a line, the
excess data is ignored.
5) d indicates the bit-image data. Set a corresponding bit to 1 to print a dot or to 0 to
not print a dot.
6) If the width of the printing area set by GS L and GS W less than the width
required by the data sent with the ESC * command, the following will be performed
on the line in question (but the printing cannot exceed the maximum printable area):
The width of the printing area is extended to the right to accommodate the amount
of data.
If step does not provide sufficient width for the data, the left margin is reduced to
accommodate the data.
7) After printing a bit image, the printer returns to normal data processing
mode.
8) This command is not affected by print modes (emphasized, doublestrike, underline, character size or White/Black reverse printing), except
upside-down printing mode.
9) The relationship between the image data and the dots to be printed is as
follows;
http://www.woosim.com
51
- When 8-dot bit image is selected
- When 24-dot bit image is selected
http://www.woosim.com
52
ESC X 4 x y d1… dk
[Name]
Define user-defined bit-image
[Format]
ASCII
ESC
d1… dk
HEX
1B
58
34
d1… dk
Decimal
27
88
52
d1… dk
[Description]
ESC X 4 x y d1 ... d(x ? ?y) defines a user-defined bit image using x ? ?8
dots in the horizontal direction and y dots in the vertical direction.
- Horizontal direction dots
- Vertical direction dots
= (x * 8)dots
= (y)dots
http://www.woosim.com
53
[Note]
ESC X 4 is supported in Porti_W,S produced after August,2002, but it’s not
supported in others yet.
[Reference]
ESC W, ESC O, FF
http://www.woosim.com
54
6.7. Status Commands
The PORTI-T80 supports the following status transmission command.
C o m m an d
DLE EOT EOT
N am e
Real-time paper status transmission
DLE EOT EOT
[Name]
Real-time paper status transmission
[Format]
ASCII
DLE
EOT
EOT
HEX
10
04
04
Decimal
16
[Description]
Real time paper status transmission
[Note]
DLE EOT EOT is supported only by PORTI_T80.
Bit 0 / 1
Status
Roll end sensor : paper present
Roll end sensor : paper not present
Not used
Paper end sensor : paper present
Paper end sensor : paper not present
Not used
Not used
Not used
Front end sensor : paper present
Front end sensor : paper not present
Not used
http://www.woosim.com
55
6.8. Barcode Commands
The PORTI-Series supports the following barcode commands.
C o m m an d
N am e
GS h
Set barcode height
GS w
Set barcode width
GS k
Print bar code
GS H
Select printing position of Human Readable Interpretation
(HRI) characters
GS h n
[Name]
Set barcode height
[Format]
ASCII
GS
HEX
1D
68
Decimal
29
104
[Range]
0 ≤ n ≤ 255
[Description]
GS h n selects the height of a barcode.
n specifies the number of dots in the vertical direction.
One dot corresponds 1/8mm. The default setting is n = 80.
GS w n
[Name]
Set barcode width
[Format]
ASCII
GS
HEX
1D
77
Decimal
29
119
[Range]
n = 0, 3 ≤ n ≤ 5
[Description]
GS w n selects the horizontal size of a barcode.
The default setting is n = 0.
http://www.woosim.com
56
① GS k m d1 … dk NUL
② GS k m n d1 … dn
[Name]
Print barcode
[Format]
① ASCII GS
HEX
m d1… dk NUL
6B
m d1… dk 00
107
m d1… dk 0
m n
d1… dn
6B
m n
d1… dn
107
m n
d1… dn
1D
Decimal 29
② ASCII GS
HEX
1D
Decimal 29
① 0 ≤ m ≤ 6 (k and d depends on the bar code system used.)
[Range]
② 0 ≤ m ≤ 6 (n and d depends on the bar code system used.)
[Description]
GS k m d1… dk NUL selects a barcode system and print the barcode.
m specifies a bar code system as follows;
①
Barcode System
Number of character
Remarks
UPC-A
11 ≤ k ≤ 12
48 ≤ d ≤ 57
UPC-E
11 ≤ k ≤ 12
48 ≤ d ≤ 57
EAN13
11 ≤ k ≤ 13
48 ≤ d ≤ 57
EAN8
7 ≤ k ≤ 8
48 ≤ d ≤ 57
CODE39
1 ≤ k
48 ≤ d ≤ 57, 65 ≤ d ≤ 90,
d = 32, 36, 37, 43, 45, 46,47
ITF
1 ≤ k (even number)
48 ≤ d ≤ 57
CODABAR
1 ≤ k
48 ≤ d ≤ 57, 65 ≤ d ≤ 68,
d = 36, 43, 45, 46, 47, 58
http://www.woosim.com
57
②
Barcode System
Number of characters
Remarks
65
UPC-A
11 ≤ n ≤ 12
48 ≤ d ≤ 57
66
UPC-E
11 ≤ n ≤ 12
48 ≤ d ≤ 57
67
EAN13
11 ≤ n ≤ 13
48 ≤ d ≤ 57
68
EAN8
7 ≤ n ≤ 8
48 ≤ d ≤ 57
69
CODE39
1 ≤ n ≤ 255
48 ≤ d ≤ 57, 65 ≤ d ≤
90,
d = 32, 36, 37, 43, 45,
46,47
70
ITF
1 ≤ n ≤ 255 (even number)
48 ≤ d ≤ 57
71
CODABAR
1 ≤ n ≤ 255
48 ≤ d ≤ 57, 65 ≤ d ≤
68,
d = 36, 43, 45, 46, 47, 58
72
CODE93
1 ≤ n ≤ 255
0 ≤ d ≤ 127
73
CODE128
2 ≤ n ≤ 255
0 ≤ d ≤ 127
[Notes]
1) This command ends with a NUL code.
2) When the bar code system used is UPC-A or UPC-E, the printer prints the bar
code data after receiving 12 bytes bar code data and processes the following data as
normal data.
3) When the bar code system used in EAN13, the printer prints the bar code
after receiving 13 bytes bar code data and processes the following data as normal
data.
4) When the bar code system used in EAN8, the printer prints the bar code
after receiving 8 bytes bar code data and processes following data as normal data.
5) The number of data for ITF bar code must be even numbers.
When an odd number of data is input, the printer ignores the last received data.
6) n indicates the number of bar code data, and the printer processes n bytes from
the next character data as bar code data.
7) If n is outside of the specified range, the printer stops command processing and
http://www.woosim.com
58
processes the following data as normal data.
8) Be sure to keep spaces on both right and left sides of a bar code.
Spaces are different depending on the types of the bar code.
[Reference] GS h, GS w, GS H, ESC L, ESC W, ESC FF
GS H n
[Name]
Turn HRI characters print mode ON/OFF
[Format]
ASCII
GS
HEX
1D
48
Decimal
29
72
[Range]
n = 0, 1
[Description]
GS H n turns HRI characters print mode on or off.
When the LSB(least significant bit) of n is 1, HRI
characters print mode is turned on; When it is 0, HRI
character print mode is turned off.
The default setting is n=0.
ESC Z m n k d d1… dn
[Name]
Print 2D barcode
[Format]
ASCII
ESC
m n k d d1… dn
HEX
1B
5A
m n k d d1… dn
Decimal
27
90
m n
[Range]
d1… dn
1 ≤ m ≤ 7
0 ≤n ≤ 8
2 ≤ k ≤ 5
1 ≤ d ≤ 65535
[Description]
Print 2D bar code (PDF417 format).
m specifies column number of 2D bar code.
n specifies security level to restore when bar code image is damaged.
k is used for define horizontal and vertical ratio.
d is consist of 2 byte. 1st byte is lower number. And 2nd byte is upper number.
http://www.woosim.com
59
6.9. Macro Function Commands
The PORTI-Series supports the following macro function commands;
C o m m an d
N am e
GS :
Start/end macro definition
GS ^
Execute macro
GS :
[Name]
Start/End macro definition
[Format]
ASCII
GS
HEX
1D
3A
Decimal
29
58
[Description]
Starts ends macro definition.
[Notes]
1) Macro definition starts when this command is received during normal operation.
Macro definition ends when this command is received during macro definition.
2) When GS ^ is received during macro definition, the printer ends macro definition
and clears the definition.
3) Macro is not defined when the power is turned on.
4) The defined contents of the macro are not cleared by ESC @.
Therefore, ESC @ can be included in the contents of the macro definition.
5) If the printer receives GS : again immediately after previously receiving GS : the
printer remains in the macro undefined state.
6) The contents of the macro can be defined up to 2048 bytes. If the macro
definition exceed 2048 bytes, excess data is not stored.
[Reference]
GS ^
http://www.woosim.com
60
GS ^ r t m
[Name]
Execute macro.
[Format]
ASCII
GS
HEX
1D
5E
t m
Decimal
29
94
t m
[Range]
0 <= r <= 255
0 <= t <= 255
m = 0, 1
[Description]
Executes a macro.
[Notes]
1) r specifies the number of times to execute the macro.
2) t specifies the waiting time for executing the macro.
3) m specifies macro executing mode.
When LSB of m = 0
The macro executes r times continuously at the interval specified by t.
When LSB of m = 1
After waiting for the period specified by t, the ERROR LED indicators blink and the
printer waits for the FEED button to be pressed. After the button is pressed, the
printer executes the macro once. The printer repeats the operation r times.
4) The waiting time is t x 100 ms for every macro execution.
5) If this command is received while a macro is being defined, the macro definition
is aborted and the definition is cleared.
6) If the macro is not defined or if is 0, nothing is executed.
7) When the macro is executed (m=1), paper always cannot be fed by using the
FEED button.
[Reference]
GS :
http://www.woosim.com
61
6.10. Mechanism Control Commands
The PORTI-Series supports the following mechanism control commands;
Command
Name
GS V
Select cut mode and cut paper
ESC i
Partial cut (One point center uncut)
GS V m
[N1ame]
Select cut mode and cut paper
[Format]
ASCII
GS
HEX
1D
56
86
Decimal
29
[Range]
n=0, n=1
[Description]
GS V m select a paper cutting mode and then cut the paper.
[Note]
GS V is supported only by Porti_T80 / AP60
Print Mode
Full cut
Partial cut
ESC i
[Name]
Partial cut (One point center uncut)
[Format]
ASCII
ESC
HEX
1B
69
Decimal
27
105
[Description]
ESC i executes a partial cut of the paper with one point center uncut.
ESC i operates in the same way as GS V when m=1 .
[Note]
ESC i is supported only by Porti_T80 / AP60
http://www.woosim.com
62
6.10. Magnetic Card Reader Commands
The PORTI-SC30 supports the following magnetic card reader commands;
Command
Name
ESC M D
Set 2 track card reader mode.
ESC M C
Set 3 track card reader mode.
EOT
Cancel card reader mode
ESC M C
[Name]
Set 3 track card reader mode.
[Format]
ASCII
ESC
HEX
1B
4D
43
Decimal 27
77
67
[Note]
When the ESC M C command is executed, printed nothing before read the
card or executed the EOT command.
ESC M D
[Name]
Set 2 track card reader mode.
[Format]
ASCII
ESC
HEX
1B
4D
44
Decimal 27
77
68
[Note]
When the ESC M D command is executed, printed nothing before read the
card or executed the EOT command.
EOT
[Name]
Cancel card reader mode.
[Format]
ASCII
EOT
HEX
04
Decimal 4
[Description]
Cancel card reader mode.
http://www.woosim.com
63
6.11. Miscellaneous function commands
The PORTI- Series supports the following miscellaneous function commands;
Command
Name
GS P
Set horizontal and vertical motion units
ESC @
Initialize printer
ESC L
Select page mode
ESC S
Select standard mode
GS P x y
[Name]
Set horizontal and vertical motion units.
[Format]
ASCII
GS
HEX
1D
50
Decimal
29
80
[Range]
0 ≤ x ≤ 255, 0 ≤ y ≤ 255
[Description]
Sets the horizontal and vertical motion units to approximately 25.4/x mm(1/x inch)
and approximately 25.4/y mm(1/y inch), respectively.
When x and y are set to 0, the default setting of each value is used.
[Notes]
1) The horizontal direction is perpendicular to the paper feed direction and the
vertical direction is the paper feed direction.
2) In standard mode, the following commands use x or y, regardless of character
rotation (upside-down).
Command using x : ESC SP, ESC $, ESC \, GS L, GS W
Command using y : ESC 3, ESC J
3) In page mode, the following command use x or y, depending on character
orientation;
When the print starting position is set to the upper left or lower right of the printing
area using ESC T(data is buffered in the direction perpendicular to the paper feed
direction);
Command using x : ESC SP, ESC $, ESC W, ESC \
Command using y : ESC 3, ESC J, ESC W, GS $, GS \
http://www.woosim.com
64
When the print starting position is set to the upper right or lower left of the printing
area ESC T (data is buffered in the paper feed direction);
Command using x : ESC 3, ESC J, ESC W, GS $, GS \
Command using y : ESC SP, ESC $, ESC W, ESC \
4) The command does not affect the previously specified values.
5) The calculated result from combining this command with others is truncated to
the minimum value of the mechanical pitch.
[Default]
x = 180, y = 360
[Reference]
ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS W, GS \
ESC @
[Name]
Initialize printer.
[Format]
ASCII
ESC
HEX
1B
40
Decimal
27
64
[Description]
Clears the data in the print buffer and resets the printer mode to the mode that was n
effect when the power was turned on.
[Notes]
1) The data in the receive buffer is not cleared.
2) The macro definition is not cleared.
ESC L
[Name]
Select page mode
[Format]
ASCII
ESC
HEX
1B
4C
Decimal
27
76
[Description]
Switches from standard mode to page mode.
[Notes]
1) This command is enabled only when processed at the beginning of a line in
standard mode.
2) This command has no effect in page mode.
3) After printing by FF is completed or by using ESC S, the printer returns to
standard mode.
http://www.woosim.com
65
4) This command sets the position where data is buffered to the position specified
by ESC T within the printing area defined by ESC W.
5) This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for page
mode;
Set right-side character spacing : ESC SP
Select default line spacing : ESC 2, ESC 3
6) Only valve settings is possible for the following commands in page mode; these
commands are not executed.
Select justification : ESC a
Turn upside-down printing mode on/off : ESC {
Set left margin : GS L
Set printable area width : GS W
7) The printer returns to standard mode when power is turned on, the printer is
reset, or ESC @ is used.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
ESC S
[Name]
Select standard mode
[Format]
ASCII
ESC
HEX
1B
53
Decimal
27
83
[Description]
Switches from page mode to standard mode.
[Note]
1) This command is effective only in page mode.
2) Data buffered in page mode are cleared.
3) This command sets the print position to the beginning of the line.
4) The printing area set by ESC W are initialized.
5) This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those
for standard mode;
http://www.woosim.com
66
Set right-side character spacing : ESC SP
Select default line spacing : ESC 2, ESC 3
6) The following commands are enabled only to set in standard mode.
Set printing area in page mode : ESC W
Select print direction in page mode : ESC T
7) The following commands are ignored in standard mode.
Set absolute vertical print position in page mode : GS $
Set relative vertical print position in page mode : GS \
8) Standard mode is selected automatically when power is turned on,
the printer is reset, or command ESC @ is used.
[Reference]
FF, ESC FF, ESC L
http://www.woosim.com
67
7 Introduction of Protocol IrDA
7.1. Frame structure
SOF TOF DATA CHECKSUM EOF
SOF : Start of frame (SOF code must be 0xC0)
TOF : Type of frame (See the table shown below)
Type of frame
Code Data
ACK
0x06
NACK
0x15
ENQ
0x05
Print data
0x44
Require printer status 0x53
Response printer status 0x51
EOT
0x04
EOF : End of frame (EOF code must be 0xC1)
CHECKSUM : Checksum is necessary in case of the TOF code is 0x44.
DATA : Data is in need of the TOF code is 0x44, 0x05, 0x53.
1. If the code (0xC0, 0xC1, 0x7D) is included on sending data, first insert 0x7D code, then
operate XOR with that code and 0x20.
Example : In case the send data is 0x20 0x7D 0xC1, the sending data will be 0x20 0x7D 0x5D
0x7D 0xE1.
Note : The bolded character is inserted data.
And the underlined character is the data operated XOR with 0x20.
2. If the code 0x7D is included on receiving, first remove 0x7D code, then operate XOR with
next code and 0x20.
Example : In case the received data is 0x20 0x7D 0x5D 0x7D 0xE1, the real data will be 0x20
0x7D 0xC1.
http://www.woosim.com
68
Note : The underlined character is the data operated XOR with 0x20.
7.2. Process of printer status inquiry
1. If there is no response from printer, after fifth times recheck with every 400ms,
then display the error message such as "The printer cannot fined" on your display panel same
like CRT, PDA, etc.
2. Structure of printer status response frame
SOF 0x53 STATUS
Previous DATA
EOF
- STATUS
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit
ON
OFF
Paper empty
Normal
Low battery
Normal
Head open
Normal
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
- Previous DATA ID : Finally used DATA ID
http://www.woosim.com
69
7.3. Process of transmitting and
receiving print data
1. It is error condition shown below.
- Wrong checksum received
- No data received within 200ms after data receive.
- There is no 0xC1 code after checksum
- It is not number code (0x30 - 0x39) in data length field.
7.4 Structure of print data frame
SOF 0x44
DATA DATA Print
ID
Length DATA
CHECKSUM EOF
http://www.woosim.com
70
1. DATA ID : It is made up 1 digit number.
The range is 0 - 9.
The number must be character code.
2. DATA Length : It consists of 4 digit numbers.
The range is 0001 - 9999.
The number must be character code.
Example - If you want to send 4 numbers data to printer, you must send 0x30 0x30 0x30
0x34 codes as data length.
3. CHECKSUM : It is composed of 2 bytes.
1st byte is operated XOR value with odd numbers of data.
And 2nd byte is operated XOR value with even numbers of data
Example - In case of print data is SAMPLE TEST, data length is 0011 (0x30 0x30 0x31
0x31), the 1st byte of checksum is operated XOR value with S, M, L, space, E, T,
and 2nd byte checksum is operated XOR value with A, P, E, T, S.
Note :
1. Do not have time interval over 200ms on transmitting print data.
2. If not receive EOT or NACK frame within 1 second after transmitting print data
completely, jump to the transmitting ENQ frame.
3. If receive EOT frame after print data transmitted, quit the print operation
4. In case of receiving NACK frame, if receive NACK frame more than three times
after transmit print data three times, display CHECK PRINTER STATUS on your
display panel and wait operator's measures.
http://www.woosim.com
71
7.5. Structure of ENQ frame
SOF 0x05 DATA ID EOF
1. If there is no response ACK frame after transmitting ENQ frame from host, transmit again
ENQ frame after waiting 400ms.
2. In case of no response over 10 times from printer about ENQ frame, display PRINTER
CANNOT FINDED message on the your display panel, and wait operator's measures.
http://www.woosim.com
72
Appendix
A.MISCELLANEOUS NOTES
1. Printer mechanism handing
1) Do not pull the paper out when the cover is closed.
2) Because the thermal elements of the print head and driver ICs are easy to break, so do not
touch them with any metal objects.
3) Since the areas around the print head become very hot during and just after printing, do not
touch them.
4) Do not use the cover open button except when necessary.
5) Do not touch the surface of the print head because bust and dirt can stick to the surface and
damage the elements.
6) Thermal paper containing Na, K, Cl ions can harm the print head thermal elements.
Therefore, be sure to use only the specified paper.
7) If you want to use label paper, please contact your dealer for assistance.
2. Thermal paper handling
- Notes on using thermal paper
Chemicals and oil on thermal paper may cause discoloration and faded printing.
Therefore, pay attention to the following;
1) Use water paste, starch paste, polyvinyl paste, or CMC paste when gluing thermal paper.
2) Volatile organic solvents such as alcohol, ester, and ketone can cause discoloration.
3) Some adhesive tapes may cause discoloration or faded printing.
4) If thermal paper touches anything which includes phthalic acid ester plasticizer for a long
time, it can reduce the image formation ability of the paper and can cause the printed image to
fade. Therefore, when storing thermal paper in a card case or sample notebook, be sure to use
only products made from polyethylene, polypropylene, or polyester.
5) If thermal paper touches diazo copy paper immediately after copying, the printed surface
may be discolored.
6) Thermal paper must not be stored with the printed surfaces against each
other because the printing may be transferred between the surfaces.
http://www.woosim.com
73
7) If the surface of thermal paper is scratched with a hard metal object
such as a nail, the paper may become discolored.
- Notes on thermal paper storage
Since color development begins at 70°
C (158°
F), thermal paper should be protected
from high temperature, humidity, and light, both before and after printing.
1) Store paper away from high temperature and humidity.
Do not store thermal paper near a heater or in enclosed places exposed to direct sunlight.
2) Avoid direct light Extended exposure to direct light may cause discoloration or faded
printing.
3. Others
Because this printer uses plated steel, the manual cutting edge may be subject to rust.
However, this does not affect the printer performance.
http://www.woosim.com
74
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 74
Creator : NewManual_Porti_SC30.doc - Microsoft Word
Create Date : 2001:01:19 19:56:19
Title : NewManual_Porti_SC30.PDF
Author : Administrator
Producer : Acrobat PDFWriter 4.0 for Windows NT
EXIF Metadata provided by EXIF.tools