WOOSIM SYSTEMS WSP-I350X Mobile Printer User Manual
Woosim System Inc. Mobile Printer
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3156345 |
| Application ID | zMeUWIdfmEf52l0vvV45Ng== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 149.48kB (1868499 bits) |
| Date Submitted | 2016-10-05 00:00:00 |
| Date Available | 2016-10-05 00:00:00 |
| Creation Date | 2017-12-15 19:43:00 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-15 19:43:00 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Administrator |
MODEL WSP-i350 (3inch Rugged Mobile Printer) Rev. 4.1 WOOSIM SYSTEMS Inc. (#501, Daerung Technotown 3th) 115, Gasan digital 2-ro, Geumcheon-gu, Seoul, 153-772 Rep. of KOREA Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice http://www.woosim.com WSP-i350 Rev. 4.1 Copyright WSP-i350 3inch Rugged Mobile printer operator’s manual. Copyright ⓒ2016 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies. Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer OFF , before you connect or removed the cable on the rear side, in order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer OFF Notice The contents of this manual are subject to change without notice. http://www.woosim.com WSP-i350 Rev. 4.1 Introduction The WSP-i350 is the ideal solution for Mobile banking system , Retail, point of sales, Credit card Transaction, other traveling and mobile computing etc. The general features of WSP-i350 printer are as follows: Compact size (120×130.5×58.4mm) Light weight(395g) for true mobility [standard] Very silent printing thru direct thermal printing method High speed (120mm/sec, MAX) High resolution(203dpi : 8dots/mm). UART, Bluetooth Ver3.0, Wireless LAN(IEEE802.11b/g/n) [option] interface Support Magnetic Stripe Reader[option] Support Graphic LCD(128×32dots) with Blue LED Backlight Support text and graphic printing Intuitive LED’s indicate Power(on/off), Error Easier paper roll loading by CLAMSHELL design One touch paper cover Printer door open & Paper-out sensor Easier maintenance with self-diagnostic. In field programming – Update Firmware, Download Fonts and Logos Water-resistant construction.( IP54 – Certified ) Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible. Flow control : Software (XON/XOFF) ※ Hardware flow control not supported in printer. Free fall: 1.5 meter Agency Approvals http://www.woosim.com WSP-i350 Rev. 4.1 Operating Precautions Please follow the precautions below to enjoy and maintain the full performance of the printer. Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 80% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing . ● Do not remove or reinstall the communication cable during printing or transmission. ● Do not touch the connectors of the communication during printing. ● Switch the POWER OFF when not in use. ● Do not use other solvent. ● The AC adapter, the battery charger and the battery pack may become warm when in use. This is normal and is not a malfunction. ● When the battery pack is used at low temperature, the length of time the printer can be used may be shortened. Thermal Paper Handling ● Store the thermal paper in a cool, dry and dark place. ● Do not rub the paper with hard object. ● Do not leave the paper with hard object. ● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods. ● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies. ● Do not use chemical glue. ● Always use the clean thermal paper. http://www.woosim.com WSP-i350 Rev. 4.1 Federal Communications Commission Radio Frequency Interference Statement FCC ID : QDDWSP-I350X This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition. CE WARNING ㆍChanges and modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ㆍIt is desirable that it be installed and operated with at least 20cm or more between the radiator and person’s body(excluding extremities hand, wrists, feet, and ankles) http://www.woosim.com WSP-i350 Rev. 4.1 CONTENTS 1. Outline. .................................................................................................................................. 8 1.1. Model classifications. .................................................................................................. 8 1.2 Product Part Number System ..................................................................................... 9 1.3. Specifications. ............................................................................................................ 10 2. Setting up the printer. ...................................................................................................... 12 2.1. Printer & Accessories ................................................................................................ 12 2.2. Printer Features ......................................................................................................... 13 2.3. Dimensions................................................................................................................. 14 2.4. Replacing paper roll. ................................................................................................. 16 2.5. Power supply ............................................................................................................. 17 2.5.1. Specified power supply .................................................................................. 17 2.5.2. Installing the battery ...................................................................................... 17 2.5.3. Recharging the battery pack ......................................................................... 18 2.6. Set operation mode .................................................................................................. 19 2.7. Confirmation of the Wireless-LAN information ..................................................... 24 2.7.1. MAC Address printing .................................................................................... 24 2.7.2. Confirmation of the Wireless-LAN setting information ............................. 24 3. Interface............................................................................................................................... 25 3.1. UART(RS-232C or TTL) or USB ................................................................................. 25 3.2. Bluetooth .................................................................................................................... 26 3.3. Wireless LAN.............................................................................................................. 26 3.4. Card Reading ............................................................................................................. 26 4. Using the printer................................................................................................................ 27 4.1. Control panel. ............................................................................................................ 27 4.2. The self test ............................................................................................................... 28 4.3. Using the Accessory ................................................................................................. 28 4.3.1. Using the Shoulder strap ............................................................................... 28 4.3.2. Using the Belt clip .......................................................................................... 29 5. Consumable Parts. ............................................................................................................. 30 http://www.woosim.com WSP-i350 Rev. 4.1 5.1. Recommended paper. ............................................................................................... 30 5.2. Printing position. ....................................................................................................... 30 6. Revision History ............................................... 오류! 책갈피가 정의되어 있지 않습니다. http://www.woosim.com WSP-i350 Rev. 4.1 1. Outline. 1.1. Model classif ications. WSP-i350 Model Interface A1 : UART/Bluetooth (Standard) Power None : DC 8.4V 1.2 Symbol Standby symbol IEC 5009, the standby symbol(line partially within a broken circle), Indicates a sleep mode or low power state. Direct current symbol This symbol is found on many electronic devices that either require or produce direct current. http://www.woosim.com WSP-i350 Rev. 4.1 1.3 Product Par t Number System Model name Interface Spec. Wired S40 SC30 RS-232C Bluetooth W25 TTL IrDA USB Wireless LAN RS-485 None Parallel None Example) 1. Porti-S40 Wireless Serial/Bluetooth Part No. ⇒ S40/A1 2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1 Note) The above table is the interface format which is supported. But some of the interfaces are not supported according to the product and please contact us, if you have any questions regarding the interface. http://www.woosim.com WSP-i350 Rev. 4.1 1.4. Specif ications. Item Specifications Print method Direct thermal line printing Character size Characters per line Optional Characters - Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16 - KOR : 24X24(16X24) - KOR, CHN, JPN : 24cpl Alphanumeric:95, Extended Graphics:128X50 pages, International:10, Simplified/Traditional Chinese, Japanese, Korean(optional) 203dpi, 8dots/mm Print width 3-inch (72mm, 576dots) Print speed 120mm / sec (MAX) Weight (Including battery) Interface Paper roll CHN, JPN : 24X24 - Font A : 48cpl / Font B : 64cpl / Font C : 72cpl Resolution Dimension 120×130.5×58.4mm 120×132.5×58.4mm (MSR model) 395g / 407g (MSR model) UART, Bluetooth Ver 3.0, Wireless LAN(IEEE802.11b/g/n) [option] Thermal roll paper (80mm wide, 50ø) 1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93, CODE-128, ITF, CODABAR Barcodes 2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE, DATA Matrix, Maxicode Etc :GS1 databar Driver Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible. H/W Spec MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit Receive buffer size 1M bytes Sensor Support Cover open, Paper, Label ( Continue… ) http://www.woosim.com 10 WSP-i350 Rev. 4.1 Item Specifications MSR [option] 1&2 or 2&3 Track Reading LCD 128×32 Dots FSTN (Blue LED Backlight) Battery Rechargeable 7.4V DC, 1,800mAh /2200mAh (Li-ion) Battery duration 1 hour continuous printing Battery charger Input (100~250V AC, 50~60Hz) Output(8.4VDC/0.8A), 4hours full charge time Temperature Environment conditions MCBF(Mean Cycle Between Failure) Humidity Mechanical Head -10°C ~ 50°C (operating) -10°C ~ 70°C (storage) 30% - 80% (operating) 10% - 90% (storage) 37,000,000 lines Approximately 50Km < Table 1 > http://www.woosim.com 11 WSP-i350 Rev. 4.1 2. Setting up the printer. 2.1. Printer & Accessories Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Communication cable Thermal roll paper Battery charger adaptor Belt clip WSP-i350 Battery Pack ▼ OPTIONAL MSR Shoulder strap http://www.woosim.com 12 WSP-i350 Rev. 4.1 2.2. Printer Features Standard model MSR model http://www.woosim.com 13 WSP-i350 Rev. 4.1 2.3. Dimensions ▶ Standard model 120 58.4 130.5 http://www.woosim.com 14 WSP-i350 Rev. 4.1 ▶ MSR model 120 58.4 132.5 http://www.woosim.com 15 WSP-i350 Rev. 4.1 2.4. Replacing paper roll. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like the picture. 3. Insert a new paper roll as shown. 4. Tear the excess paper off using the edge of paper door as a tear bar. http://www.woosim.com 16 WSP-i350 Rev. 4.1 2.5. Power supply 2.5.1. Specified power supply The following specification is requested for Power supply. Battery Charger : DC 8.4V/0.8A Avoid using power supply which its power capacity of power current is extremely high. 2.5.2. Installing the batter y NOTE : ● Before installing or removing the battery pack, ensure the printer is OFF. ● If the printer is not used for long period of time, remove the battery pack from the printer. ● Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. ① To install battery pack, proceed as follows: Insert the battery in the arrow direction and make sure the lock completed ② Reverse the order to remove the battery pack. http://www.woosim.com 17 WSP-i350 Rev. 4.1 2.5.3. Recharging the batter y pack For recharging the battery pack, install the battery pack in the printer. Insert the Battery Charger to the charge connector of the printer. NOTE : ● While charging the printer, turn off the printer power. ● Do not remove the battery during charging. ● The battery is consumable parts and when purchasing, compared to the use hour is gradually decreases. (Warranty 6 month) ● If the printer is not used for a long time, unplug the power cord from the printer and outlet. ● The recharging time depends on the voltage level and ambient temperature of the battery. Normally, if takes about 4 to 5 hours to recharge a battery pack. ● You must use only the supplied adapter. ● Red Lamp : charging the battery. Green Lamp: charging is finished. http://www.woosim.com 18 WSP-i350 Rev. 4.1 2.6. Set operation mode In keeping on pressing the Feed and Power button simultaneously until after the ERROR lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode. (refer Table 2) *Note No additional mode settings are required to connect Android or iOS devices. ** If you want to change the Bluetooth Mode of printer, you need to disconnect the Bluetooth function of the current paired Smartphone. ** Methods : 1. Turn off the Bluetooth function of the current paired Smartphone. (Bluetooth ICON in LCD is disappeared.) 2. Change the printer mode. (Additionally, we want to recommend you to rest(OFF→ON) the printer and change mode.) Printer LCD status Android status http://www.woosim.com iOS status 19 WSP-i350 Rev. 4.1 FEED button : changing Printer MODE status. (Power Lamp) POWER button : changing OPTION status. (Error Lamp) [Example] The defaults of the printer are : UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low / Quality low / Mark use / Sensor High / 5 min Off If a user wants to modify the defaults with Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high / Quality high / Mark no use / Sensor Low / No use Press FEED & POWER Button during the Error Lamp flickers 5 times. You will see present COMMUNICATION mode in the LCD. (UART) Press the POWER Button twice. And then, interface mode has set to Bluetooth mode. When you press FEED button once. You will see present BAUD RATE mode in the LCD. (9600 bps) Press POWER Button 3 times. And then, BAUD RATE has set to 57,600 bps. When you press FEED button once. You will see present DATA BIT mode in the LCD. (8 Data bit) Press POWER Button once. And then Data Bit has set to 7 DATA BIT. When you press FEED button once. You will see present PARITY mode in the LCD. (No parity) Press POWER Button once. And then the Parity bit has set to ODD Parity Bit.. When you press FEED button once. You will see present STOP BIT mode in the LCD. (1 stop bit) Press POWER Button once. And then the density has set to 2 Stop bit. When you press FEED button once. You will see present DENSITY mode in the LCD. (Density low) Press POWER Button twice. And then the density has set to Density high. http://www.woosim.com 20 WSP-i350 Rev. 4.1 When you press FEED button once. You will see present Quality mode in the LCD. (Low) Press POWER Button once. And then the quality has set to Quality high. When you press FEED button once. You will see present MARK mode in the LCD. (Use) Press POWER Button once. And then the mark has set to Mark no use. When you press FEED button once. You will see present SENSOR mode in the LCD. (High) Press POWER Button once. And then the sensor has set to Sensor Low. When you press FEED button once. You will see present POWER DOWN mode in the LCD. (5 min Off) Press POWER Button once. And then the Power down has set to Power down no use. If all the mode have set, press the POWER Button and the FEED Button at the same time. After then release the buttons at the same time. Bluetooth / 57600bps / 7 data bit / Odd parity / 2 stop bit / Density high / Quality High / Mark No use / Sensor Low / no use http://www.woosim.com 21 WSP-i350 Rev. 4.1 OPTION MODE Communication Port Bluetooth WLAN UART UART Protocol UART Protocol UART Bluetooth WLAN Protocol Bluetooth Protocol WLAN Bluetooth(iAP) 9600 bps 19200 bps Baud Rate 38400 bps 57600 bps 115200 bps Data Bit 7 Data bit 8 Data bit No Parity Parity Bit Odd Parity Even Parity Stop Bit 1 Stop bit 2 Stop bit Density Low Density Medium Density Density High Density High+1 Density High+2 Quality Mark Low High No use Use Continue… http://www.woosim.com 22 WSP-i350 Rev. 4.1 MODE OPTION Low Sensor Medium1 Medium2 High No use 1min Sleep 2min Sleep 3min Sleep 4min Sleep Power Down 5min Sleep 1min Off 2min Off 3min Off 4min Off 5min Off < Table 2 > Notice : Bluetooth(iAP) is the mode which is used in iPod, iPhone and iPad Whole aspect. http://www.woosim.com 23 WSP-i350 Rev. 4.1 2.7. Conf irmation of the Wireless-LAN information 2.7.1. MAC Address printing MAC address which is set to the printer can be printed out in pressing the Power and Feed button simultaneously and taking off them shortly after the ERROR lamp blinks 2.7.2. Confirmation of the Wireless-LAN setting information Press the Power button in the printer turning on As the LCD backlight turns on, MAC Address is indicated. IP Address on LCD is indicated in pressing the Power button once again Subnet mask on LCD is indicated in pressing the Power button once again Gateway IP on LCD is indicated in pressing the Power button once again DNS sever IP on LCD is indicated in pressing the Power button once again ※ Since the configuration of Wireless LAN can not be done with the printer in person, you are required to use the Wireless LAN-setting program which WOOSIM offers http://www.woosim.com 24 WSP-i350 Rev. 4.1 3. Inter face 3.1. UART The WSP-i350 printer has a UART interface and is connected by means of a 5 pin mini USB socket. In the following table, the signals present on the Mini- USB socket are listed: ① UART Pin No. Name Direction Function TxD Output Transmit Data RxD Input Receive Data GND Ground NC. GND Ground NOTE : ● If you connect the printer interface cable is converted to UART mode. ● When data receiving, when it removes the communication cable, it loses a data. http://www.woosim.com 25 WSP-i350 Rev. 4.1 3.2. Bluetooth Category Specification Bluetooth Spec. Bluetooth Ver3.0 / Class2 (10m) Frequency band 2402~2480㎒ Protocol L2CAP, RFCOMM, SDP Profile GAP, SDAP, SPP 3.3. Wireless L AN Category Specification Function Radio frequency transfer Module (IEEE802.11b/g/n standard conformity) Frequency band 2.4GHz Channel 1 to 13 channel Security WEP(64/128), WPA(TKIP), WPA2(AES) 3.4. Card Reading Please take notice that Magnetic Stripe Card should be swapped in direction of arrow. Card can be read in both http://www.woosim.com 26 WSP-i350 Rev. 4.1 4. Using the printer 4.1. Control panel. BUTTON - FEED Button : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. - POWER Button: ① When of 5 or more seconds presses and power comes to on or off. ② After pressing the POWER and the FEED button simultaneously, if the ERROR lamp 5 turn signals POWER button is converted with MODE functions. - In keeping on pressing the Feed and Power button simultaneously until after the ERROR lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode. (Refer to 2.6. Set operation mode for details about mode conversion) LAMP - POWER lamp(GREEN) : Printer is ON and ready to receive data. - ERROR lamp(RED) : Indicated a fault condition or a printer error. (details: no paper, paper cover opened. etc.) LCD - LCD will display most of the printer status. (details : current printer status, paper out, indicated remaining battery, Bluetooth connection etc.) http://www.woosim.com 27 WSP-i350 Rev. 4.1 4.2. The self test Self-Test prints out the current setting value of printer. The way of self-test is as follows. 1. Insert proper paper into the printer. 2. Power on while pressing feed button to start self-test. 3. Printer will print out the current status. (ROM version and communication mode) 4. And then pattern of characters will be printed out. 5. Self-test will be finished automatically and turned to the standby status. ※ In case printer does not work properly, please contact Woosim customer service center. 4.3. Using the Accessor y 4.3.1. Using the Shoulder strap Please sling it over your shoulder after fixing the shoulder strap to the printer in the order of the illustration. http://www.woosim.com 28 WSP-i350 Rev. 4.1 4.3.2. Using the Belt clip Following the instruction of the arrow, please put the belt clip in the hole and turn and fix the screw to the right by using a thing like a coin. Afterward, you can use it like the picture below http://www.woosim.com 29 WSP-i350 Rev. 4.1 5. Consumable Par ts. 5.1. Recommended paper. Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø50mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has Near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed Characters may fade. 3. Change of paper color starts from approx 70 ℃. Pay attention to heat, humidity and sun light. 4. Color of paper may be changed by being scratched by nail or hard metal, etc 5.2. Printing position. http://www.woosim.com 30
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:4a9e3193-ab41-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:27 23:38:50Z Create Date : 2017:07:27 23:38:50Z Creator Tool : UnknownApplication Document ID : uuid:4a9e3193-ab41-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools