WOOSIM SYSTEMS WSP-I450 THERMAL PRINTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1375963
Application ID	fqbujz5mMOnj6NXJ+e4oXA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	241.27kB (3015885 bits)
Date Submitted	2010-11-15 00:00:00
Date Available	2010-11-15 00:00:00
Creation Date	2017-11-07 10:09:01
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-07 10:09:01
Document Title	Microsoft Word - Appendix-G User Manual_WSP_i450.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

MODEL
WSP-i450
(4inch Industrial Printer)
Rev. 1.0
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : +82-2-2107-3700
Fax : +82-2-2107-3707
URL: http://www.woosim.com
http://www.woosim.com
WSP-i450 Rev. 1.0
ˆ Copyright
WSP-i450 4inch Industrial printer operator’s manual.
Copyright ⓒ2009 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
and may not be reproduced in whole or in part without the prior written permission of
Woosim Systems Inc.
ˆ Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
ˆ Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side, in
order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”
ˆ Notice
The contents of this manual are subject to change without notice.
All specifications are subjected to change without notice
http://www.woosim.com
WSP-i450 Rev. 1.0
ˆ Introduction
The WSP-i450 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of WSP-i450 printer are as follows:
X Pocket size 151.5×135.7×63.5mm (MSR : 151.5 X 142.5 X 63.5)
X Light weight(550g) for true mobility [standard]
X Very silent printing thru direct thermal printing method
X High speed (60mm/sec, MAX)
X High resolution(203dpi : 8dots/mm).
X UART(RS-232C or TTL), Bluetooth Ver2.1
Wireless LAN (IEEE802.11b/g) interface
X Support Magnetic Stripe Reader
X Support Graphic LCD(128×32dots) with Blue LED Backlight
X Intuitive LED’s indicate Power(on/off),Error and Battery status
X Support text and graphic printing
X Easier paper roll loading by CLAMSHELL design
X One touch paper cover
X Printer door open & Paper-out sensor
X Easier maintenance with self-diagnostic.
X In field programming – Update Firmware, Download Fonts and Logos
X Compack and easy to carry around.
X Water-resistant construction.( IP54 – Certified )
X Microsoft Windows 98 /ME /2000 / XP / VISTA / 7 compatible.
X Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
X Free fall: 1 meter onto concrete (option 1.5 meter)
X Agency Approvals
http://www.woosim.com
WSP-i450 Rev. 1.0
ˆ Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
X Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 0% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
X Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.
http://www.woosim.com
WSP-i450 Rev. 1.0
ˆ Note
This Device has been evaluated to comply with RF exposure requirement for general use
limit in portable condition. It is safe to be used in sold condition.
http://www.woosim.com
WSP-i450 Rev. 1.0
CONTENTS
1. Outline. ...........................................................................................................................................7
1.1. Model classifications. ...............................................................................................................7
1.2. Product Part Number System....................................................................................................7
1.3. Specifications............................................................................................................................8
2. Setting up the printer...................................................................................................................10
2.1. Printer & Accessories .............................................................................................................10
2.2. Printer Features.......................................................................................................................11
2.3. Replacing paper roll................................................................................................................13
2.4. Power supply ..........................................................................................................................14
2.4.1. Specified power supply. ...................................................................................................14
2.4.2. Installing the battery and the belt strap ............................................................................14
2.4.3. Recharging the battery pack.............................................................................................15
2.5. Set operation mode. ................................................................................................................16
3. Interface........................................................................................................................................22
3.1. UART(RS-232C or TTL)........................................................................................................22
3.2. Bluetooth ................................................................................................................................23
3.3. Wireless LAN .........................................................................................................................23
4. Smart Card Module.....................................................................................................................24
4.1. General Spec...........................................................................................................................24
4.2. Communication Protocol Sequence........................................................................................25
4.2.1. Regular Operation............................................................................................................25
4.2.2. Irregular Operation (Communication Error)....................................................................25
5. Using the printer. .........................................................................................................................26
5.1. Control panel. .........................................................................................................................26
5.2. The self test.............................................................................................................................27
6. Consumable Parts........................................................................................................................28
6.1. Recommended paper...............................................................................................................28
5.2. Printing position......................................................................................................................28
http://www.woosim.com
WSP-i450 Rev. 1.0
1. Outline.
1.1. Model classifications.
WSP-i450
Model
Interface
None: UART/Bluetooth
A2 : UART/IrDA
Power
None : DC 8.4V
1.2. Product Part Number System.
Model name
2. Porti-SC30
Interface Spec.
Wired
S40
SC30
W25
Example) 1. Porti-S40
Serial/Bluetooth
Wireless
RS-232C
Bluetooth
TTL
IrDA
USB
None
RS-485
Parallel
None
Part No. ⇒ S40/A1
Bluetooth Only Part No. ⇒ SC30/Z1
http://www.woosim.com
WSP-i450 Rev. 1.0
1.3. Specifications.
Item
Specifications
Print method
Direct thermal line printing
Characters per line
Eng : 92cpl (MAX)
Character size
Eng. : 9×24dots, 12×24dots
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution
203dpi, 8 dots/mm
Print width
4-inch ( 104mm, 832dots)
Print speed
60mm / sec (MAX)
Dimension
Kor. : 16×24dots, [24×24dots]
151.5× 135.7 × 63.5 mm (MSR : 151.5 X 142.5 X 63.5mm)
550g (Including battery & roll paper) [standard]
Weight
556g (Including battery & roll paper) [MSR]
Interface
UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR
Wireless LAN interface(IEEE802.11b/g)
Paper roll
Thermal roll paper ( 113mm wide, 50ø)
Barcodes
1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
Black mark
Support black mark detection
H/W Spec.
MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size
1M bytes
MSR
ISO 7810 / 7811 / 7812 1&2&3 Track Reading
ISO 7816 Compliant (EMV level 1 Certified) /
Smart Card Reader
T=0, T=1 support / 1 SAM (Security Application Module)
LCD
128×32 Dots FSTN (Blue LED Backlight)
Battery
Rechargeable 7.4V DC, 2,200mAh (Li-ion)
Battery duration
1 hour continuous printing
(Continue…)
http://www.woosim.com
WSP-i450 Rev. 1.0
Item
Specifications
Input (100~250V AC, 50~60Hz)
Battery charger
Output(8.4VDC/0.8A), 4hours full charge time
Temperature
Environment
conditions
Humidity
MCBF(Mean Cycle
Between Failure)
Mechanical
Head
-10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
30% - 80% (operating)
0% - 95% (storage)
37,000,000 lines
Approximately 50 Km
< Table 1 >
http://www.woosim.com
WSP-i450 Rev. 1.0
2. Setting up the printer.
2.1. Printer & Accessories
Your printer box should include these items. If any items are damaged or missing, please
contact your dealer for assistance.
Thermal roll paper
Battery pack
WSP–i450
Battery charger adaptor
Communication cable
SAM Connector
Shoulder band
Smart Card
http://www.woosim.com
MSR
10
WSP-i450 Rev. 1.0
2.2. Printer Features
▶ Part Name
http://www.woosim.com
11
WSP-i450 Rev. 1.0
▶ Dimensions
http://www.woosim.com
12
WSP-i450 Rev. 1.0
2.3. Replacing paper roll.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover by placing your fingers under the paper cover lock and pull a paper
cover lock open.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
http://www.woosim.com
13
WSP-i450 Rev. 1.0
2.4. Power supply
2.4.1. Specified power supply.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.
2.4.2. Installing the battery and the belt strap
NOTE : ● Before installing or removing the battery pack, ensure the printer is OFF.
● If the printer is not used for long period of time, remove the battery pack
from the printer.
** BATTERY **
To install battery pack, proceed as follows:
- Insert the Battery pack in the direction of the arrow.
Reverse the order to remove the battery pack.
** BELT STRAP **
http://www.woosim.com
14
WSP-i450 Rev. 1.0
2.4.3. Recharging the battery pack
For recharging the battery pack, install the battery pack in the printer.
Insert the Battery Charger to the charge connector of the printer.
NOTE : ● While charging the printer, turn off the printer power.
● Do not remove the battery during charging.
● The battery is consumable parts and when purchasing, compared to the
use hour is gradually decreases. (Warranty 6 month)
● If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
● The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
● You must use only the supplied adapter.
● Red Lamp
: charging the battery.
Green Lamp: charging is finished.
http://www.woosim.com
15
WSP-i450 Rev. 1.0
2.5. Set operation mode.
Change the mode and option using the mode Code.
z MODE button : changing Printer MODE status. (Error Lamp)
z FEED button : changing OPTION status.
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low / Quality low
/ Mark use / Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high / Quality high
/ Mark no use / Sensor medium1 / Power down no use
X Press MODE Button and FEED button during the Error Lamp flickers 5 times.
→ You will see present COMMUNICATION mode in the LCD.
→ Press the MODE Button twice.
And then, interface mode has set to Bluetooth mode.
X When you press FEED button once.
→ You will see present BAUD RATE mode in the LCD.
→ Press MODE Button 3 times.
And then, baudrate has set to 57,600 bps.
X When you press FEED button once.
→ You will see present DATA BIT mode in the LCD.
→ Press MODE Button once.
And then Data Bit has set to 7 data bit.
X When you press FEED button once.
→ You will see present PARITY mode in the LCD.
→ Press MODE Button once.
And then the Parity bit has set to Odd parity bit.
X When you press FEED button once.
→ You will see present STOP BIT mode in the LCD.
→ Press MODE Button once.
And then the density has set to 2 stop bit.
http://www.woosim.com
16
WSP-i450 Rev. 1.0
X When you press FEED button once.
→ You will see present DENSITY mode in the LCD.
→ Press MODE Button twice.
And then the density has set to Density high.
X When you press FEED button once.
→ You will see present Quality mode in the LCD.
→ Press MODE Button once.
And then the quality has set to Quality high.
X When you press FEED button once.
→ You will see present MARK mode in the LCD.
→ Press MODE Button once.
And then the mark has set to Mark no use.
X When you press FEED button once.
→ You will see present SENSOR mode in the LCD.
→ Press MODE Button once.
And then the sensor has set to Sensor medium1.
X When you press FEED button once.
→ You will see present PWDN mode in the LCD.
→ Press MODE Button once.
And then the Power down has set to Power down no use.
If all the mode have set, press the MODE Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high / Quality high
Mark no use / Sensor medium1 / Power down no use)
If the status is not correct, please try it again according to the procedure.
http://www.woosim.com
17
WSP-i450 Rev. 1.0
* Bluetooth Version
Communication
Port
Baud Rate
Data Bit
Parity Bit
Stop Bit
Density
Quality
POWER Lamp
ERROR Lamp
(Green)
(Red)
Option
UART(RS-232C)
Protocol UART(RS-232C)
Bluetooth
Protocol Bluetooth
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
7 Data bit
8 Data bit
No Parity
Odd Parity
Even Parity
1 Stop bit
2 Stop bit
Density Low
Density Medium
Density High
Low
High
(Continue…)
http://www.woosim.com
18
WSP-i450 Rev. 1.0
Mark
Sensor
Power Down
POWER Lamp
ERROR Lamp
(Green)
(Red)
10
Option
No use
Use
Low
Medium1
Medium2
High
No use
1 minute
2 minute
3 minute
4 minute
5 minute
< Table 2 >
http://www.woosim.com
19
WSP-i450 Rev. 1.0
* WLAN Version
Communication
Port
Baud Rate
Data Bit
Parity Bit
Stop Bit
Density
Quality
POWER Lamp
ERROR Lamp
(Green)
(Red)
Option
UART(RS-232C)
Protocol UART(RS-232C)
WLAN
Protocol WLAN
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
7 Data bit
8 Data bit
No Parity
Odd Parity
Even Parity
1 Stop bit
2 Stop bit
Density Low
Density Medium
Density High
Low
High
(Continue…)
http://www.woosim.com
20
WSP-i450 Rev. 1.0
Mark
Sensor
Power Down
POWER Lamp
ERROR Lamp
(Green)
(Red)
10
Option
No use
Use
Low
Medium1
Medium2
High
No use
1 minute
2 minute
3 minute
4 minute
5 minute
< Table 3 >
http://www.woosim.com
21
WSP-i450 Rev. 1.0
3. Interface.
3.1. UART(RS-232C or TTL)
Pin No.
Name
Direction
Function
TxD
Output
Transmit Data
RxD
Input
Receive Data
CD
NC.
GND
Cable Detector
Ground
The WSP-i450 printer has a UART(RS-232C or TTL) interface and is connected
by means of a 5 pin mini USB socket. In the following table, the signals present on
the Mini- USB socket are listed:
NOTE :
●
When data receiving, when it removes the communication
cable, it loses a data.
http://www.woosim.com
22
WSP-i450 Rev. 1.0
3.2. Bluetooth
Category
Specification
Bluetooth Spec.
Bluetooth Ver2.1 / Class2 (10m)
Frequency Range
2.4GHz ISM BAND (2402 ~ 2480 MHz)
RF Power
Below 10 dBm
Modulation method
GFSK
Oscillation method
PLL
Data Transmission Rate
57600bps Fixed.
Data bit
8 Data bit Fixed.
Parity bit
No parity Fixed.
Stop bit
1 Stop bit Fixed.
3.3. Wireless LAN
Category
Specification
Interface
Network
RF Power
Below 10 dBm
Modulation method
CCK, OFDM
Oscillation method
PLL
Protocol
TCP, UDP, IP, ICMP, ARP, DHCP, PPPoE
IEEE802.11b/g
DNS lookup, DDNS(Dynamic DNS), WEP
Communication Mode
T2S
TCP Server Mode
COD
TCP Client Mode
ATC
TCP Server / Client
(AT command emulation)
U2S
UDP
http://www.woosim.com
23
WSP-i450 Rev. 1.0
4. Smart Card Module
4.1. General Spec.
X Contact Smart Card Reader Module for ISO/IEC-7816
X Support Asynchronous Protocol T=0,T=1
X Smart Card Connection
Short Circuit Current Limitation
6KV ESD Protection on whole Smart Card Interface
Connector : Friction Type with Smart Card presence detection
X 1 SAM (Security Application Module)
X EMV Level 1 Certified
http://www.woosim.com
24
WSP-i450 Rev. 1.0
4.2. Communication Protocol Sequence
4.2.1. Regular Operation
Host
Command
Module
Execution
Response
4.2.2. Irregular Operation (Communication Error)
500ms timeout
Host
Command
Command
Module
Host
Command
Command is
Command
Executio
Command
Error
Module
CheckSumEr
http://www.woosim.com
Executio
25
WSP-i450 Rev. 1.0
5. Using the printer.
5.1. Control panel.
X Button
- FEED Button :
When the printer is on, paper can be feed manually by pressing and holding the
FEED button for more than one second.
- POWER Button :
When of 5 or more seconds presses and power comes to on or off.
After pressing the POWER and the FEED button simultaneously,
if the ERROR lamp 5 turn signals POWER button is converted with
MODE functions.
MODE functions are for use to change communication mode.
(Refer to 2.5. Set operation mode for details about mode conversion)
X Panel lamp
-POWER (Green) : Printer is ON and ready to receive data.
-ERROR (Red)
: Indicated a fault condition or a printer error.
(i.e : no paper, paper cover opened. etc.)
http://www.woosim.com
26
WSP-i450 Rev. 1.0
5.2. The self test.
The self test procedure will check most of the printer functions.
For self test, turn on the power while holding down the FEED Button.
The Self-Test checks the following :
1) Make sure paper roll has been installed properly.
2) The Self-Test prints the current printer status, which provides the control
ROM version and the communication method setting.
3) After printing the current printer status, Self-Test will print a pattern using the
built-in character set.
4) The Self-Test automatically ends.
The printer is ready to receive data as soon as it completed the self test.
http://www.woosim.com
27
WSP-i450 Rev. 1.0
6. Consumable Parts.
6.1. Recommended paper.
Type
: Thermal Paper
Paper width
: 104mm
Paper thickness
: 60±5㎛
Outer diameter
: Ø50mm or less
Recording side
: Outside of roll
Cautions
1. Do not paste the paper to the core. And the roll paper which has
Near end mark printing on its near end is recommended.
2.
Chemicals or oil may change the color of paper, or printed Characters may fade.
3.
Change of paper color starts from approx 70 ℃.
Pay attention to heat, humidity and sun light.
4.
Color of paper may be changed by being scratched by nail or hard metal, etc
5.2. Printing position.
http://www.woosim.com
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2010:11:10 18:08:58+09:00
Modify Date                     : 2010:11:11 10:36:19+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2010:11:11 10:36:19+09:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - Appendix-G User Manual_WSP_i450.doc
Document ID                     : uuid:fc4c4bf0-495f-4e5f-a3b2-3ab86272565f
Instance ID                     : uuid:f7069498-ec21-4729-8bec-9975b8843292
Page Count                      : 28

EXIF Metadata provided by EXIF.tools