WOW Technologies SWPRO51 SOUNDBAR User Manual

WOW Technologies (Singapore) Pte Ltd SOUNDBAR

UserManual.wiki >

WOW Technologies >

SWPRO51 User Manual HTML Version

User Manual

QUICK START GUID

Model: SHOCKWAFE PRO 5.1

NAKAMICHI

Your Unit is designed and manufactured to operate within defined design limits, and misuse may

result in electric shock or fire. To prevent your Unit from being damaged, the following rules should

be observed for its installation, use, and maintenance. Please read the following safety instructions

before operating your Unit. Keep these instructions in a safe place for future reference.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as when the power supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

• To reduce the risk of electric shock or component damage, switch off the power before

connecting other components to your Unit.

• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not

use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.

• Always use the accessories recommended by the manufacturer to insure compatibility.

• When moving your Unit from an area of low temperature to an area of high temperature,

condensation may form in the housing. Wait before turning on your Unit to avoid causing fire,

electric shock, or component damage.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure

reliable operation of your Unit and to protect it from overheating, be sure these openings are not

blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper

• ventilation is provided.

• Never push any object into the slots and openings on your Unit enclosure. Do not place any

objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock.

Never spill liquids on your Unit.

• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect

power, unplug the power cord.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• The wall socket should be located near your Unit and be easily accessible

• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates

into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result

in fire or electric shock.

• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the

power cord and contact your dealer immediately. Do not try to repair your unit yourself.

• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the

internal components may function abnormally. Unplug the power cord immediately and contact your

dealer for repair.

• Continued use of your Unit may cause fire or electric shock.

• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in

environments with heavy dust or high humidity may cause fire or electric shock.

• Ensure that the power cord and any other cables are unplugged before moving your Unit.

• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may

damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for

an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the

battery to leak which can damage the remote control or injure the operator.

• The marking label of the subwoofer was located on the external bottom enclosure of the product.

• The equipment shall be used at maximum 35 degree Celsius ambient temperature.

• See the important note and rating located on the back of the unit.

• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any

container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping,

splashing, rain, or moisture.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the

installation instructions.

• CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or

specified type.

• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows

closed. Do not disassemble the batteries or dispose of it in fire.

• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device

shall remain readily operable.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

This lightning flash with arrowhead symbol within an equilateral triangle is intended

to alert the user to the presence of not isolated dangerous voltage within the

product that may be sufficient magnitude to constitute a risk of shock to persons.

This lightning flash with arrowhead symbol within an equilateral triangle is intended

to alert the user to the presence of not isolated dangerous voltage within the

product that may be sufficient magnitude to constitute a risk of shock to persons.

Warning: This equipment is a Class II or double insulated electrical appliances. It

has been designed in such way that it does not require a safety connection to

electrical earth.

TABLE OF CONTENTS

Package Contents ………………………………………………………………………………………………….. 4

Controls and Connections …………………………………………………………………………………………. 5

First Time Set Up …………………………………………………………………………………………………… 6

Using the Remote …………………………………………………………………………………………………...

Connecting with HDMI ……………………………………………………………………………………………...

Functions on your Remote …………………………………………………………………………………………

EQs on your Remote ……………………………………………………………………………………………….

Programming the Remote ………………………………………………………………………………………….

Using Bluetooth Mode ……………………………………………………………………………………………

Re-linking the Subwoofer with the Sound Bar …………………………………………………………………...

Advanced Setup …………………………………………………………………………………………………….

Advanced Setup – HDMI …………………………………………………………………………………………...

Wall Mounting the Sound Bar ……………………………………………………………………………………...

Wall Mounting the Satellite Speakers …………………………………………………………………………….

Help and Troubleshoot……………………………………………………………………………………………

Warranty Clause ………………………………………………………….………………………………………

Specifications………………………………………………………………………………………………………...

Legal and Compliance…………………………………………………….………………………………………

PACKAGE CONTENTS

2 x Satellite Speaker

Audio Cables

4 x Velcro Strips

HDMI Cable Digital Optical Cable

Subwoofer Power Cable

2 x Satellite

Speakers

Wireless

Subwoofer

Shockwafe Pro

Sound Bar

Remote Control

with Batteries

2 x Mounting Screws

(Satellite Speakers)

8 x Wall Screws

2xSatellite

Wall Mount

Brackets

8 x Screw Brackets3.5mm Audio Cable

2 x Mounting Screws

(Sound Bar)

2xSound Bar

Wall Mount

Brackets

* For Firmware update only.

CONTROLS & CONNECTIONS

Back of Sound Bar

USB*

USB In

OPTICAL (4)

Digital Optical

Audio In

HDMI IN (3)

HDMI In

HDMI IN (2)

HDMI IN

AUX (7)

Analog Audio In

(Stereo 3.5mm)

DIGITAL (6)

Coaxial In

HDMI OUT (1)

HDMI Out

(ARC)

Top of Sound Bar

Input

Press to change the audio source.

Demo

Press to play NAKAMICHI demo track for tuning.

Volume

Increase or decrease the loudness of the audio.

Power

Press to turn Sound Bar on or off.

Back of Subwoofer

Back of Satellite Speaker

LED Indicator

Pairing Button

Power Port

Power Switch

Satellite Speaker Ports

(Connects to Satellite Speakers)

Satellite Speaker Port

(Connects to Subwoofer)

* Not all TVs have the audio outputs shown above. To connect the Sound

Bar directly to your other devices (Blu-Ray player, game system, etc.) see your

device’s user manual.

* Cables appearance may differ from the ones supplied.

† When using either of the Digital Inputs, if there is no audio: (A) try setting

the TV output to PCM or (B) Connect directly to your Blu-ray/other source,

some TVs do not pass through digital audio.

‡ Cable not included.

3.5MM AUDIO

CABLE

GOOD

DIGITAL OPTICAL

CABLE†

BETTER

DIGITAL COAXIAL

CABLE†‡

BETTER

FIRST-TIME SETUP

Back of Sound Bar

CHOOSE ONE CABLE

AND CONNECT

IT TO YOUR TV

GOOD

BETTER

BEST

HDMI CABLE

BEST

HDMI cables send Video (Out) and receive

Audio from the TV. See the Connecting with

HDMI section for more information.

† When using the Digital Inputs, if there is no audio: (A) try setting the TV

output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do

not pass through digital audio.

Connect the Sound Bar to your TV* using one of

the connection types to the left. Choose the best

possible connection type. Be sure the TV port is

an audio output, not an audio input.

* Not all TVs have the audio outputs shown above. To connect the Sound Bar

directly to your other devices (Blu-ray player, game system, etc) see your device’s

user manual.

Do not use HDMI IN for First-Time Setup.

See Advanced Setup if you would like to connect

HDMI devices (such as Blu-ray™ players, cable

boxes, and game consoles) to your Sound Bar.

2Connect the power cable to the

Sound Bar AC IN as shown.

Plug the power cable into an

electrical outlet.

Connect the satellite speakers to the subwoofer

using the included satellite speaker audio cables.

Match the color coded speaker cable

to the matching speaker port color.

Connect a power cable to

the subwoofer.

Plug the power cable into a

power outlet.

Flip the power switch into

the ON position.

Sound Bar is centered

below the TV.

For the best surround sound experience, position the Sound Bar, subwoofer, and

satellite speakers as shown. The Sound Bar should be close to ear level.

Note: Speaker stands not included.

Remove the battery cover

by gently sliding it away

from the remote.

Insert the included batteries

and gently slide the battery

cover back into place.

Power Source

Top Top

Turn your TV on, the Sound Bar will automatically turn on

and begin searching for an active input.

You can press the SOURCE button to switch between

audio sources. For example,IfyouareconnectedyourTV

to HDMI IN (ARC), set the Sound Bar to HDMI ARC.

Tip: Pressing the SOURCE button will stop

the auto detect function.

USING THE REMOTE Display

Displays Sound Bar Settings

InputSource

Presstochangeinputsource.

Vol +/‐

Presstoincreaseanddecreasevolume.

Enter/Play/Pause/Mute

Presstoselectanoption.

Presstoplayorpause.

Presstomute/unmute.

PresstoskiptothenexttrackinBluetoothmode.

(ChangesaudiosettingsinMenu)

SportsEQ

PresstocyclethroughSportsEQs

TVEQ

PresstocyclethroughTVEQs

NightEQ

PresstocyclethroughNightEQs

TVPower

Presstopoweron/offTV.

Power

Presstopoweron/offSoundBar.

Presstoaccessmenusettings.

PresstoskiptotheprevioustrackinBluetoothmode.

(ChangesaudiosettingsinMenu)

Up/Down

PresstochangechannelsonTV.

Presstocyclethroughsettingsandoptionsinmenu.

MovieEQ

PresstocyclethroughMovieEQs

MusicEQ

PresstocyclethroughMusicEQs

GameEQ

PresstocyclethroughGameEQs

CONNECTING WITH HDMI

What is HDMI Audio Return Channel (ARC)?

Using HDMI ARC, your TV can send audio to the

sound bar using an HDMI cable.

You will need to connect your sound bar to your

TV’s HDMI ARC port using an HDMI cable that is

ARC compatible.

To connect using HDMI*:

1. Connect one end of the HDMI cable to the HDMI

(ARC) port on the back of your TV.

2. Connect the other end to the HDMI OUT (ARC) port

on your NAKAMICHI sound bar.

3. From the AUDIO menu on your TV, change the Digital

Audio Setting to Dolby Digital or Bitstream.

4. From the SYSTEM menu, enable CEC and ARC

(SAC)†functions.

5. From the CEC menu, select Device Discovery to

* Steps may differ by TV manufacturer. See your TV’s user manual for more information.

† CEC Function naming may differ by TV manufacturer. See your TV’s user manual for more information.

If you want to use the volume buttons on the TV

remote control to control the sound bar, enable

System Audio Control from the CEC menu.

Back of TV*

* HDMI ARC port location may differ by TV manufacturer. See your TV’s user manual for more information.

Connect to HDMI (ARC) port on your TV

FUNCTIONS ON YOUR REMOTE

Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings

of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on the

Sound Bar will behave differently with each function.

Function LED Behavior Description

Center Volume Press the Next/Previous button to increase/decrease the center speakers sound level. The

LED indicators will move to the right with increasing levels and to the left with decreasing

levels.

FIVE Left LEDs indicate Center

Volume at 5. (Default: 5)

Rear Speakers

Volume Press the Next/Previous button to increase/decrease the rear speakers sound level. The

LED indicators will move to the right with increasing levels and to the left with decreasing

levels.

FIVE Left LEDs indicate Rear

Speakers Volume at 5. (Default: 5)

Rear Speakers

Balance Press the Next/Previous button to move the rear speakers balance towards the left/right

rear channel speaker. The LED indicators will move to the right when levels are adjusted to

the right and to the left when adjusted to the left.

Two center LEDs indicate Rear

Speakers Balance is centered.

Subwoofer Volume Press the Next/Previous button to increase/decrease the subwoofer speakers sound level.

The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

FIVE Left LEDs indicate Subwoofer

Volume at 5. (Default: 5)

Surround ON/OFF ON Press the Next/Previous button to enable/disable surround. When enable (ON), all the

inputs will produce 5.1 surround sound. When disable (OFF), 5.1 surround sound sources

will be down mixed to 2.1 stereo.

OFF

LEDs located here.

Function LED Behavior Description

Bluetooth Pairing Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes.

Your can now search for the sound bar (SHOCKWAVE PRO 5.1) using your Bluetooth

device. The sound bar will power down if no device is found. Note: Set your Bluetooth

device into pairing mode prior to the sound bar.

LEDs flash from left to right and

back continuously when searching

for devices.

Demo Track

Press the Enter button on the Remote. The Sound Bar will play the Nakamichi

Demonstration Track. Use this track to adjust volume levels of the Center, Rear and

Subwoofer or the balance of the Rear Speakers.

LEDs flash from left to right and

back continuously when searching

for devices.

Reset

Press the Next/Previous and Enter buttons to select and reset your remote and sound bar

to the factory default settings. All paired Bluetooth devices will be unpaired. All programmed

IR remotes will also be removed.

Upon Reset all LEDs will blink

once.

EQs ON YOUR REMOTE

Press either Movie, Sports, Music, TV,, Game or Night EQ buttons on your remote to toggle through more EQ settings under that

genre. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on the Sound Bar will

behave differently with each function.

EQ LED Behavior Description

Movie

Press MOVIE button to toggle between MOVIE EQ in this sequence: Movie, Action, Sci-Fi,

Animation, Comedy and Drama.

Fifth LED will blink once to indicate

change of Movie EQ.

Sports

Press SPORTS button to toggle between SPORTS EQ in this sequence: Sports, Football,

Baseball, Basketball, Fighting and Racing.

Sixth LED will blink once to indicate

change of Sports EQ.

Press TV button to toggle between TV EQ in this sequence: TV, Action, Sci-Fi, Animation,

Comedy and News.

Seventh LED will blink once to

indicate change of TV EQ.

Music

Press MUSIC button to toggle between MUSIC EQ in this sequence: Music, Rock, Pop, R&B

and Country

Eighth LED will blink once to

indicate change of Music EQ.

Gaming

Press GAME button to toggle GAMING EQ.

Ninth LED will blink once to indicate

change of Gaming EQ.

Night Press NIGHT button to toggle between NIGHT MODE in this sequence: Sub ON, Sub LOW

(Bass reduced to level 2), Sub OFF and Headphones.

• In “Headphone mode”, Sound Bar transmits sound to only Nakamichi headphones for personal listening.

• When in “Headphone” mode mode, powering off the Sound Bar and powering on again will return to “Sub ON” EQ

mode. This will prevent confusion that the Sound Bar has no sound output.

Tenth LED will blink once to

indicate change of Night Mode.

Leveledat4”/10cmapart.

PROGRAMMING THE REMOTE

You can program your Remote to control your TV. Press the Menu button on the remote, then use the Up/Down buttons to navigate to LRN

TV RMT. Use the Next/Previous buttons to toggle through LRN POWER, LRN CH +, and LRN CH -. Press the corresponding commands

from your TV Remote when prompted.

You can erase the commands learned on your remote by simply resetting it. Press the Menu button on the remote, then use the Up/Down

buttons to navigate to LRN TV RMT. Use the Next/Previous buttons to toggle through to RESET LRN. Press OK when prompted to confirm

reset.

Turn off your TV when programming your Sound

Bar Remote.

Point both the Sound Bar and TV remotes towards

towards each other when programming. Maintain

them level and at approximately 4”/10cm apart.

USING BLUETOOTH MODE

Your Sound Bar supports music streaming from smartphones,

tablets, and computers with Bluetooth capability. Device

compatibility will vary, see your device’s documentation for

more information.

Once you have paired your source device to the Sound Bar, as

long as you stay within range of the Sound Bar, your device

should remain paired.

If the input is changed, the Bluetooth device will disconnect. If

the source is changed back to Bluetooth, any paired Bluetooth

device will reconnect automatically.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind

that Bluetooth is a compressed audio format, so streamed music

may lose some integrity when compared to a wired connection.

Try the following if your sound quality is less than optimal:

• If you hear any break-up or disconnect while streaming music from

your device, move the source device closer to the Sound Bar.

• Be sure that there are no solid obstructions in the line-of-sight

between the Sound Bar and the source device.

• Other wireless devices can affect Bluetooth range, including

wireless security cameras, wireless video baby monitors, cordless

phones, and microwave ovens. Turning off or moving these devices

may improve Bluetooth range.

Your Sound Bar is not equipped with a

microphone, so it cannot operate as a hands-free

device for a smartphone.

Reduce the volume levels on your device and

on the Sound Bar before pressing Play. High

volume levels can damage your hearing.

RE-LINKING THE SUBWOOFER WITH THE SOUND BAR

First confirm that the Sound Bar is switched off. Power on

the Subwoofer.Press and hold the pairing button on the

back of the subwoofer for 5 seconds. The LED on the back

of the subwoofer will begin to blink.

Power on the Sound Bar. The sound Bar and

Subwoofer will re-link automatically. Once the

linking is completed, the LED on the back of the

Subwoofer will light continuously.

If automatic re-link does not work, press and

hold the DEMO button on the Sound Bar to

initiate re-link.

The subwoofer has already been paired with the Sound

Bar by NAKAMICHI. However, they may need to be re-

link if there is no sound coming from the subwoofer.

Turn off your TV speakers when

programming your sound bar.

DIGITAL (6) †

Coaxial In

OPTICAL (4)

Digital Optical Audio In

AUX (7)

Analog Audio In

(Stereo 3.5mm)

ADVANCED SETUP

Back of Sound Bar

† Cable not included. Game Console

Network Media Player

Tablet/MP3 Player/Laptop

ADVANCED SETUP - HDMI

Blu-ray Player Cable/Satellite Box

Connect to HDMI (ARC) port on your TV

HDMI cables transmit both audio and

video. To view video from these devices,

turn the Sound Bar on, then set the Sound

Bar input to HDMI-ARC. Set your TV input

to the HDMI port to which the Sound Bar is

connected.

* Cables appearance may differ from the ones supplied.

Back of Sound Bar

Insert the two wall-mount screws into the wall-mount screw holes, and

then tighten them with a Phillips screwdriver.

WALL-MOUNTING THE SOUND BAR

Wall-Mount Screw Holes

Place the included wall mounting template against the wall under

your TV. Mark the four bracket holes using a pencil. 26

Be sure your screws are attached to

wood studs, drywall anchors (for

drywall), or concrete anchors (for

brick/concrete walls).

Screws for attaching the brackets to the

wall are not included. Choose the screw

type and length appropriate to your

home’s construction. If in doubt, consult

a professional installer.

Wall Mount Screw

Screw Size: M4 x 10

If you are unfamiliar with power tools or the

layout of electrical wiring in the walls of your

home, consult a professional installer.

WALL-MOUNTING THE SATELLITE SPEAKERS

Be sure your screws are attached to wood studs or

drywall anchors (for drywall) or concrete anchors (for

brick/concrete walls). Wall mounting hardware is not

included. Wall Mount Screw

To wall-mount the satellite speakers:

1. Attach the wall mount screw to the back of

the satellite speaker.

2. Attach the wall mount to the back of the

satellite speaker.

3. Align and mount the satellite speaker with

the wall mount bracket.

If you are unfamiliar with power tools or the

layout of electrical wiring in the walls of your

home, consult a professional installer.

There is no power.

There is no sound.

I hear buzzing or humming.

The remote isn’t working.

•PressthePOWER button on the remote control or on the top of your Sound Bar.

• Ensure the power cord is securely connected.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.

•PressMUTE on the remote to ensure the Sound Bar is not muted.

•PressSOURCE on the remote or on the top of your Sound Bar to select a different input source.

• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to

your Blu-ray/other source, some TVs do not pass through digital audio.

• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM.

• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD,not

VARIABLE. Consult your TV’s user manual for more detailed information.

• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

• Ensure all cables and wires are securely connected.

• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be

with the original device.

• Connect your device to a different input on the Sound Bar.

• Replace the remote batteries with new ones.

• Point the remote directly at the center of the Sound Bar when pressing a button.

• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.

(e.g., Pandora doesn’t support the Back button.)

HELP & TROUBLESHOOTING

ONE YEAR LIMITED WARRANTY (U.S. Only)

Nakamichi Corporation USA (“Nakamichi”) warrants to the original retail purchasers (the “Original Purchasers”) only. The Original Purchasers refer to

the purchasers who purchase this Product from Nakamichi’s authorized retailers (“Nakamichi Retailers”). This warranty will terminate automatically

prior to its stated expiration if the Original Purchaser sells or transfers this Product to any other party. Nakamichi warrants that the

LOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Product will be free from defects in materials and

workmanship for a period of one (1) year from the date of original retail purchase from Nakamichi Retailer. Furthermore, Nakamichi warrants that any

AMPLIFIER OR OTHER ELECTRONIC COMPONENT that may be included in this Product will be free from defects in materials and workmanship for

a period of one (1) year from the date of original retail purchase from Nakamichi Retailer. Defective Products must be shipped, together with proof of

purchase in the form of original sales receipts from Nakamichi or Nakamichi’s Retailer showing the Product Name and date of purchase, freight and

insurance prepaid, to Nakamichi’s Support Centre at 2645 Brooklyn Queens Expressway W., Woodside, NY 11377. This Product must be shipped in

either its original packaging or packaging of affording equal degree of protection; in any case the risk of loss or damage in transit is to be borne by

you.

If upon examination at Nakamichi’s Support Centre it is determined that the unit was defective in materials or workmanship at anytime during this

Warranty period, Nakamichi will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and

Products become the property of Nakamichi. Products replaced or repaired under this warranty will be returned to you, within a reasonable time,

freight prepaid. This warranty does not include service or parts to repair damage caused by accident, disaster, acts of GOD, misuse, abuse,

negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic

appearance of cabinetry not directly attributable to defect in materials or workmanship, or service, repair, or modification of the Product which has not

been authorized or approved by Nakamichi. This warranty shall terminate if the serial number on the Product has been removed, tampered with or

defaced.

There are no other express or implied warranties. Nakamichi’ liability is limited to repair or, at its sole option, replacement of this Product. Incidental,

special and consequential damages are disclaimed where permitted by law. This Warranty applies only to Products purchased in the United States of

America.

CUSTOMER SUPPORT

Thank you for your purchase of this Product. If you have any question or comment, please visit our website at www.nakamichi-usa.com/support or

email them to support@nakamichi-usa.com.

Nakamichi Corporation USA

2645 Brooklyn Queens Expressway W., Woodside, NY 11377 30

Sound Bar:

Power Consumption:

Two 2.5” Full-Range Drivers (Centre)

Four 2.5” Full-Range Drivers (Left and Right)

Two 1.0” High Frequency Tweeters ( Left and Right)

80W

Satellite:

Power Consumption:

One 2.5” Full-Range Drivers (Each Satellite)

15Wx2

Subwoofer:

Power Consumption:

One 8” Subwoofer Driver

60W

Inputs: Three HDMI (ARC on output HDMI)

One Optical (Toslink)

One Digital Coaxial Audio

One 3.5mm Stereo Audio

Bluetooth (Wireless)

One USB (For firmware upgrade)

Sound Pressure Level (System): 104dB

Frequency Response (System): 35Hz – 22kHz

Voltage: 120V, 60Hz

Compliances: FCC, CAN ICES-3

SPECIFICATIONS

LEGAL & COMPLIANCE

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notice:

1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

RF Exposure Information

This device meets the government’s requirements for exposure to radio waves. This device is designed and

manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the

Federal Communications Commission of the U.S. Government. This device complies with FCC radiation

exposure limits set forthfor an uncontrolled environment.This equipment should be installed and operated

with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

IC Statement

1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

2. Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

IC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

Disposal and Recycling

You must dispose of this product properly, according to local laws and regulations. Because this

product contains electronic components and a battery, it must be disposed of separately from

household waste. Contact local authorities to learn about disposal and recycling options. 32

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are

trademarks of Dolby Laboratories.

This product qualifies for ENERGY STAR in the “factory default”

setting and this is the setting in which power savings will be

achieved. Changing the factory default settings or enabling

other features will increase power consumption that could

exceed the limits necessary to qualify for ENERGY STAR rating.

We want to help you save energy.

1509-US-EN-REV A

WOW Technologies SWPRO51 SOUNDBAR User Manual

WOW Technologies (Singapore) Pte Ltd SOUNDBAR

User Manual

Navigation menu

Namespaces

Views

Navigation