WOW Technologies SWPRO51S WIRELESS SUBWOOFER User Manual

WOW Technologies (Singapore) Pte Ltd WIRELESS SUBWOOFER

User Manual

QUICK START GUIDModel: SHOCKWAFE PRO 5.1NAKAMICHI
Your Unit is designed and manufactured to operate within defined design limits, and misuse mayresult in electric shock or fire. To prevent your Unit from being damaged, the following rules shouldbe observed for its installation, use, and maintenance. Please read the following safety instructionsbefore operating your Unit. Keep these instructions in a safe place for future reference.• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with a dry cloth.• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug hastwo blades with one wider than the other. A grounding type plug has two blades and a thirdgrounding prong. The wide blade or the third prong are provided for your safety. If the providedplug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched, particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.• Only use attachments/accessories specified by the manufacturer.• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold withthe apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.• Unplug this apparatus during lightning storms or when unused for long periods of time.• Refer all servicing to qualified service personnel. Servicing is required when the apparatus hasbeen damaged in any way, such as when the power supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped.• To reduce the risk of electric shock or component damage, switch off the power beforeconnecting other components to your Unit.• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do notuse a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.• Always use the accessories recommended by the manufacturer to insure compatibility.• When moving your Unit from an area of low temperature to an area of high temperature,condensation may form in the housing. Wait before turning on your Unit to avoid causing fire,electric shock, or component damage.• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensurereliable operation of your Unit and to protect it from overheating, be sure these openings are notblocked or covered. Do not place your Unit in a bookcase or cabinet unless proper• ventilation is provided.• Never push any object into the slots and openings on your Unit enclosure. Do not place anyobjects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock.Never spill liquids on your Unit.• When connected to a power outlet, power is always flowing into your Unit. To totally disconnectpower, unplug the power cord.• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.• The wall socket should be located near your Unit and be easily accessible• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetratesinto your Unit, unplug the power cord and contact your dealer. Continuous use in this case may resultin fire or electric shock.• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug thepower cord and contact your dealer immediately. Do not try to repair your unit yourself.• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, theinternal components may function abnormally. Unplug the power cord immediately and contact yourdealer for repair.• Continued use of your Unit may cause fire or electric shock.• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit inenvironments with heavy dust or high humidity may cause fire or electric shock.• Ensure that the power cord and any other cables are unplugged before moving your Unit.• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord maydamage the wires inside the cord and cause fire or electric shock. When your Unit will not be used foran extended period of time, unplug the power cord.• To reduce risk of electric shock, do not touch the connector with wet hands.• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause thebattery to leak which can damage the remote control or injure the operator.• The marking label of the subwoofer was located on the external bottom enclosure of the product.• The equipment shall be used at maximum 35 degree Celsius ambient temperature.• See the important note and rating located on the back of the unit.• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place anycontainer filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping,splashing, rain, or moisture.• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with theinstallation instructions.• CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same orspecified type.• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windowsclosed. Do not disassemble the batteries or dispose of it in fire.• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect deviceshall remain readily operable.WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.IMPORTANT SAFETY INSTRUCTIONSThis lightning flash with arrowhead symbol within an equilateral triangle is intendedto alert the user to the presence of not isolated dangerous voltage within theproduct that may be sufficient magnitude to constitute a risk of shock to persons.This lightning flash with arrowhead symbol within an equilateral triangle is intendedto alert the user to the presence of not isolated dangerous voltage within theproduct that may be sufficient magnitude to constitute a risk of shock to persons.Warning: This equipment is a Class II or double insulated electrical appliances. Ithas been designed in such way that it does not require a safety connection toelectrical earth.
TABLE OF CONTENTSPackage Contents ………………………………………………………………………………………………….. 4Controls and Connections …………………………………………………………………………………………. 5First Time Set Up …………………………………………………………………………………………………… 6Using the Remote …………………………………………………………………………………………………...Connecting with HDMI ……………………………………………………………………………………………...Functions on your Remote …………………………………………………………………………………………EQs on your Remote ……………………………………………………………………………………………….Programming the Remote ………………………………………………………………………………………….Using Bluetooth Mode ……………………………………………………………………………………………Re-linking the Subwoofer with the Sound Bar …………………………………………………………………...Advanced Setup …………………………………………………………………………………………………….Advanced Setup – HDMI …………………………………………………………………………………………...Wall Mounting the Sound Bar ……………………………………………………………………………………...Wall Mounting the Satellite Speakers …………………………………………………………………………….Help and Troubleshoot……………………………………………………………………………………………Warranty Clause ………………………………………………………….………………………………………Specifications………………………………………………………………………………………………………...Legal and Compliance…………………………………………………….………………………………………
PACKAGE CONTENTS2 x Satellite Speaker Audio Cables4 x Velcro StripsHDMI Cable Digital Optical CableSubwoofer Power Cable2 x SatelliteSpeakersWirelessSubwooferShockwafe ProSound BarRemote Controlwith Batteries2 x Mounting Screws(Satellite Speakers)48 x Wall Screws2xSatellite Wall MountBrackets8 x Screw Brackets3.5mm Audio Cable2 x Mounting Screws(Sound Bar)2xSound BarWall MountBrackets
* For Firmware update only.CONTROLS & CONNECTIONSBack of Sound Bar5USB*USB InOPTICAL (4)Digital OpticalAudio InHDMI IN (3)HDMI InHDMI IN (2)HDMI INAUX (7) Analog Audio In (Stereo 3.5mm)DIGITAL (6)Coaxial InHDMI OUT (1)HDMI Out(ARC)
Top of Sound BarInputPress to change the audio source.DemoPress to play NAKAMICHI demo track for tuning.VolumeIncrease or decrease the loudness of the audio.PowerPress to turn Sound Bar on or off.6
Back of SubwooferBack of Satellite Speaker7LED IndicatorPairing ButtonPower PortPower SwitchSatellite Speaker Ports(Connects to Satellite Speakers)Satellite Speaker Port(Connects to Subwoofer)7
* Not all TVs have the audio outputs shown above. To connect the SoundBar directly to your other devices (Blu-Ray player, game system, etc.) see yourdevice’s user manual.* Cables appearance may differ from the ones supplied.† When using either of the Digital Inputs, if there is no audio: (A) try settingthe TV output to PCM or (B) Connect directly to your Blu-ray/other source,some TVs do not pass through digital audio.‡ Cable not included.3.5MM AUDIOCABLEGOODDIGITAL OPTICALCABLE†BETTERDIGITAL COAXIALCABLE†‡BETTERFIRST-TIME SETUP1Back of Sound BarCHOOSE ONE CABLEORORAND CONNECTIT TO YOUR TV88GOODBETTERBEST
HDMI CABLEBESTHDMI cables send Video (Out) and receiveAudio from the TV. See the Connecting withHDMI section for more information.† When using the Digital Inputs, if there is no audio: (A) try setting the TVoutput to PCM or (B) Connect directly to your Blu-ray/other source, some TVs donot pass through digital audio.Connect the Sound Bar to your TV* using one ofthe connection types to the left. Choose the bestpossible connection type. Be sure the TV port isan audio output, not an audio input.* Not all TVs have the audio outputs shown above. To connect the Sound Bardirectly to your other devices (Blu-ray player, game system, etc) see your device’suser manual.9Do not use HDMI IN for First-Time Setup.See Advanced Setup if you would like to connect HDMI devices (such as Blu-ray™ players, cable boxes, and game consoles) to your Sound Bar.9
2Connect the power cable to theSound Bar AC IN as shown.Plug the power cable into anelectrical outlet.10
Connect the satellite speakers to the subwooferusing the included satellite speaker audio cables.3Match the color coded speaker cableto the matching speaker port color.11
456Connect a power cable tothe subwoofer.Plug the power cable into apower outlet.Flip the power switch intothe ON position.12
Sound Bar is centeredbelow the TV.For the best surround sound experience, position the Sound Bar, subwoofer, andsatellite speakers as shown. The Sound Bar should be close to ear level.713Note: Speaker stands not included.13
8Remove the battery coverby gently sliding it awayfrom the remote.9Insert the included batteriesand gently slide the batterycover back into place.Power SourceTop Top10Turn your TV on, the Sound Bar will automatically turn onand begin searching for an active input.You can press the SOURCE button to switch betweenaudio sources. For example,IfyouareconnectedyourTVto HDMI IN (ARC), set the Sound Bar to HDMI ARC.Tip: Pressing the SOURCE button will stopthe auto detect function.14
USING THE REMOTE DisplayDisplays Sound Bar SettingsInputSourcePresstochangeinputsource.Vol +/‐Presstoincreaseanddecreasevolume.Enter/Play/Pause/MutePresstoselectanoption.Presstoplayorpause.Presstomute/unmute.NextPresstoskiptothenexttrackinBluetoothmode.(ChangesaudiosettingsinMenu)SportsEQPresstocyclethroughSportsEQsTVEQPresstocyclethroughTVEQsNightEQPresstocyclethroughNightEQsTVPowerPresstopoweron/offTV.PowerPresstopoweron/offSoundBar.MenuPresstoaccessmenusettings.PreviousPresstoskiptotheprevioustrackinBluetoothmode.(ChangesaudiosettingsinMenu)Up/DownPresstochangechannelsonTV.Presstocyclethroughsettingsandoptionsinmenu.MovieEQPresstocyclethroughMovieEQsMusicEQPresstocyclethroughMusicEQsGameEQPresstocyclethroughGameEQs15
CONNECTING WITH HDMIWhat is HDMI Audio Return Channel (ARC)?Using HDMI ARC, your TV can send audio to thesound bar using an HDMI cable.You will need to connect your sound bar to yourTV’s HDMI ARC port using an HDMI cable that isARC compatible.To connect using HDMI*: 1. Connect one end of the HDMI cable to the HDMI (ARC) port on the back of your TV.2. Connect the other end to the HDMI OUT (ARC) porton your NAKAMICHI sound bar.3. From the AUDIO menu on your TV, change the DigitalAudio Setting to Dolby Digital or Bitstream.4. From the SYSTEM menu, enable CEC and ARC (SAC)†functions.5. From the CEC menu, select Device Discovery toregister the sound bar with the TV.* Steps may differ by TV manufacturer. See your TV’s user manual for more information.† CEC Function naming may differ by TV manufacturer. See your TV’s user manual for more information.If you want to use the volume buttons on the TVremote control to control the sound bar, enableSystem Audio Control from the CEC menu.16
Back of TV** HDMI ARC port location may differ by TV manufacturer. See your TV’s user manual for more information.Connect to HDMI (ARC) port on your TV17
FUNCTIONS ON YOUR REMOTEPress the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settingsof the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on theSound Bar will behave differently with each function.Function LED Behavior DescriptionCenter Volume Press the Next/Previous button to increase/decrease the center speakers sound level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels.FIVE Left LEDs indicate Center Volume at 5. (Default: 5)Rear Speakers Volume Press the Next/Previous button to increase/decrease the rear speakers sound level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels.FIVE Left LEDs indicate Rear Speakers Volume at 5. (Default: 5)Rear Speakers Balance Press the Next/Previous button to move the rear speakers balance towards the left/right rear channel speaker. The LED indicators will move to the right when levels are adjusted to the right and to the left when adjusted to the left.Two center LEDs indicate RearSpeakers Balance is centered.Subwoofer Volume Press the Next/Previous button to increase/decrease the subwoofer speakers sound level. The LED indicators will move to the right with increasing levels and to the left with decreasing levels.FIVE Left LEDs indicate Subwoofer Volume at 5. (Default: 5)Surround ON/OFF ON Press the Next/Previous button to enable/disable surround. When enable (ON), all the inputs will produce 5.1 surround sound. When disable (OFF), 5.1 surround sound sources will be down mixed to 2.1 stereo.OFFLEDs located here.18
Function LED Behavior DescriptionBluetooth Pairing Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes.Your can now search for the sound bar (SHOCKWAVE PRO 5.1) using your Bluetoothdevice. The sound bar will power down if no device is found. Note: Set your Bluetoothdevice into pairing mode prior to the sound bar.LEDs flash from left to right and back continuously when searching for devices.Demo TrackPress the Enter button on the Remote. The Sound Bar will play the NakamichiDemonstration Track. Use this track to adjust volume levels of the Center, Rear and Subwoofer or the balance of the Rear Speakers.LEDs flash from left to right and back continuously when searching for devices.ResetPress the Next/Previous and Enter buttons to select and reset your remote and sound barto the factory default settings. All paired Bluetooth devices will be unpaired. All programmedIR remotes will also be removed.Upon Reset all LEDs will blink once.19
EQs ON YOUR REMOTEPress either Movie, Sports, Music, TV,, Game or Night EQ buttons on your remote to toggle through more EQ settings under thatgenre. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on the Sound Bar willbehave differently with each function.EQ LED Behavior DescriptionMoviePress MOVIE button to toggle between MOVIE EQ in this sequence: Movie, Action, Sci-Fi, Animation, Comedy and Drama.Fifth LED will blink once to indicate change of Movie EQ.SportsPress SPORTS button to toggle between SPORTS EQ in this sequence: Sports, Football, Baseball, Basketball, Fighting and Racing.Sixth LED will blink once to indicate change of Sports EQ.TVPress TV button to toggle between TV EQ in this sequence: TV, Action, Sci-Fi, Animation,Comedy and News.Seventh LED will blink once to indicate change of TV EQ.MusicPress MUSIC button to toggle between MUSIC EQ in this sequence: Music, Rock, Pop, R&B and CountryEighth LED will blink once to indicate change of Music EQ.GamingPress GAME button to toggle GAMING EQ.Ninth LED will blink once to indicate change of Gaming EQ.Night Press NIGHT button to toggle between NIGHT MODE in this sequence: Sub ON, Sub LOW (Bass reduced to level 2), Sub OFF and Headphones.• In “Headphone mode”, Sound Bar transmits sound to only Nakamichi headphones for personal listening.• When in “Headphone” mode mode, powering off the Sound Bar and powering on again will return to “Sub ON” EQ mode. This will prevent confusion that the Sound Bar has no sound output.Tenth LED will blink once to indicate change of Night Mode.
Leveledat4”/10cmapart.PROGRAMMING THE REMOTEYou can program your Remote to control your TV. Press the Menu button on the remote, then use the Up/Down buttons to navigate to LRN TV RMT. Use the Next/Previous buttons to toggle through LRN POWER, LRN CH +, and LRN CH -. Press the corresponding commands from your TV Remote when prompted.You can erase the commands learned on your remote by simply resetting it. Press the Menu button on the remote, then use the Up/Downbuttons to navigate to LRN TV RMT. Use the Next/Previous buttons to toggle through to RESET LRN. Press OK when prompted to confirm reset.Turn off your TV when programming your Sound Bar Remote.Point both the Sound Bar and TV remotes towardstowards each other when programming. Maintain them level and at approximately 4”/10cm apart.21
USING BLUETOOTH MODEYour Sound Bar supports music streaming from smartphones,tablets, and computers with Bluetooth capability. Devicecompatibility will vary, see your device’s documentation formore information.Once you have paired your source device to the Sound Bar, aslong as you stay within range of the Sound Bar, your deviceshould remain paired.If the input is changed, the Bluetooth device will disconnect. Ifthe source is changed back to Bluetooth, any paired Bluetoothdevice will reconnect automatically.Maximizing SignalA Bluetooth signal has a range of up to 30 feet. Keep in mindthat Bluetooth is a compressed audio format, so streamed musicmay lose some integrity when compared to a wired connection.Try the following if your sound quality is less than optimal:• If you hear any break-up or disconnect while streaming music fromyour device, move the source device closer to the Sound Bar.• Be sure that there are no solid obstructions in the line-of-sightbetween the Sound Bar and the source device.• Other wireless devices can affect Bluetooth range, includingwireless security cameras, wireless video baby monitors, cordlessphones, and microwave ovens. Turning off or moving these devicesmay improve Bluetooth range.Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-freedevice for a smartphone.Reduce the volume levels on your device andon the Sound Bar before pressing Play. Highvolume levels can damage your hearing.22
RE-LINKING THE SUBWOOFER WITH THE SOUND BAR12First confirm that the Sound Bar is switched off. Power onthe Subwoofer.Press and hold the pairing button on theback of the subwoofer for 5 seconds. The LED on the backof the subwoofer will begin to blink.Power on the Sound Bar. The sound Bar andSubwoofer will re-link automatically. Once thelinking is completed, the LED on the back of theSubwoofer will light continuously.If automatic re-link does not work, press andhold the DEMO button on the Sound Bar toinitiate re-link.The subwoofer has already been paired with the Sound Bar by NAKAMICHI. However, they may need to be re-link if there is no sound coming from the subwoofer. Turn off your TV speakers when programming your sound bar.23
DIGITAL (6) †Coaxial InOPTICAL (4)Digital Optical Audio InAUX (7) Analog Audio In (Stereo 3.5mm)ADVANCED SETUPBack of Sound Bar† Cable not included. Game ConsoleNetwork Media PlayerTablet/MP3 Player/Laptop
ADVANCED SETUP - HDMIBlu-ray Player Cable/Satellite BoxORConnect to HDMI (ARC) port on your TVHDMI cables transmit both audio andvideo. To view video from these devices,turn the Sound Bar on, then set the SoundBar input to HDMI-ARC. Set your TV inputto the HDMI port to which the Sound Bar isconnected.* Cables appearance may differ from the ones supplied.25
Back of Sound BarInsert the two wall-mount screws into the wall-mount screw holes, andthen tighten them with a Phillips screwdriver.WALL-MOUNTING THE SOUND BAR12Wall-Mount Screw HolesPlace the included wall mounting template against the wall underyour TV. Mark the four bracket holes using a pencil. 26
Be sure your screws are attached towood studs, drywall anchors (fordrywall), or concrete anchors (forbrick/concrete walls).Screws for attaching the brackets to thewall are not included. Choose the screwtype and length appropriate to yourhome’s construction. If in doubt, consulta professional installer.Wall Mount ScrewScrew Size: M4 x 103If you are unfamiliar with power tools or the layout of electrical wiring in the walls of yourhome, consult a professional installer.27
WALL-MOUNTING THE SATELLITE SPEAKERSBe sure your screws are attached to wood studs ordrywall anchors (for drywall) or concrete anchors (forbrick/concrete walls). Wall mounting hardware is notincluded. Wall Mount ScrewTo wall-mount the satellite speakers:1. Attach the wall mount screw to the back ofthe satellite speaker.2. Attach the wall mount to the back of thesatellite speaker.3. Align and mount the satellite speaker withthe wall mount bracket.If you are unfamiliar with power tools or thelayout of electrical wiring in the walls of yourhome, consult a professional installer.28
There is no power.There is no sound.I hear buzzing or humming.The remote isn’t working.•PressthePOWER button on the remote control or on the top of your Sound Bar.• Ensure the power cord is securely connected.• Plug a different device into the electrical outlet to verify that the outlet is working correctly.• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.•PressMUTE on the remote to ensure the Sound Bar is not muted.•PressSOURCE on the remote or on the top of your Sound Bar to select a different input source.• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly toyour Blu-ray/other source, some TVs do not pass through digital audio.• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM.• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD,notVARIABLE. Consult your TV’s user manual for more detailed information.• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.• Ensure all cables and wires are securely connected.• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may bewith the original device.• Connect your device to a different input on the Sound Bar.• Replace the remote batteries with new ones.• Point the remote directly at the center of the Sound Bar when pressing a button.• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application.(e.g., Pandora doesn’t support the Back button.)HELP & TROUBLESHOOTING29
ONE YEAR LIMITED WARRANTY (U.S. Only)Nakamichi Corporation USA (“Nakamichi”) warrants to the original retail purchasers (the “Original Purchasers”) only. The Original Purchasers refer tothe purchasers who purchase this Product from Nakamichi’s authorized retailers (“Nakamichi Retailers”). This warranty will terminate automaticallyprior to its stated expiration if the Original Purchaser sells or transfers this Product to any other party. Nakamichi warrants that theLOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Product will be free from defects in materials andworkmanship for a period of one (1) year from the date of original retail purchase from Nakamichi Retailer. Furthermore, Nakamichi warrants that anyAMPLIFIER OR OTHER ELECTRONIC COMPONENT that may be included in this Product will be free from defects in materials and workmanship fora period of one (1) year from the date of original retail purchase from Nakamichi Retailer. Defective Products must be shipped, together with proof ofpurchase in the form of original sales receipts from Nakamichi or Nakamichi’s Retailer showing the Product Name and date of purchase, freight andinsurance prepaid, to Nakamichi’s Support Centre at 2645 Brooklyn Queens Expressway W., Woodside, NY 11377. This Product must be shipped ineither its original packaging or packaging of affording equal degree of protection; in any case the risk of loss or damage in transit is to be borne byyou.If upon examination at Nakamichi’s Support Centre it is determined that the unit was defective in materials or workmanship at anytime during thisWarranty period, Nakamichi will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts andProducts become the property of Nakamichi. Products replaced or repaired under this warranty will be returned to you, within a reasonable time,freight prepaid. This warranty does not include service or parts to repair damage caused by accident, disaster, acts of GOD, misuse, abuse,negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmeticappearance of cabinetry not directly attributable to defect in materials or workmanship, or service, repair, or modification of the Product which has notbeen authorized or approved by Nakamichi. This warranty shall terminate if the serial number on the Product has been removed, tampered with ordefaced.There are no other express or implied warranties. Nakamichi’ liability is limited to repair or, at its sole option, replacement of this Product. Incidental,special and consequential damages are disclaimed where permitted by law. This Warranty applies only to Products purchased in the United States ofAmerica.CUSTOMER SUPPORTThank you for your purchase of this Product. If you have any question or comment, please visit our website at www.nakamichi-usa.com/support oremail them to support@nakamichi-usa.com.Nakamichi Corporation USA2645 Brooklyn Queens Expressway W., Woodside, NY 11377 30
Sound Bar:Power Consumption: Two 2.5” Full-Range Drivers (Centre)Four 2.5” Full-Range Drivers (Left and Right)Two 1.0” High Frequency Tweeters ( Left and Right)80WSatellite:Power Consumption: One 2.5” Full-Range Drivers (Each Satellite)15Wx2Subwoofer:Power Consumption: One 8” Subwoofer Driver60WInputs: Three HDMI (ARC on output HDMI)One Optical (Toslink)One Digital Coaxial AudioOne 3.5mm Stereo AudioBluetooth (Wireless)One USB (For firmware upgrade)Sound Pressure Level (System): 104dBFrequency Response (System): 35Hz – 22kHzVoltage: 120V, 60HzCompliances: FCC, CAN ICES-3SPECIFICATIONS31
LEGAL & COMPLIANCEFCC Class B Radio Interference StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Notice:1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.RF Exposure InformationThis device meets the government’s requirements for exposure to radio waves. This device is designed andmanufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by theFederal Communications Commission of the U.S. Government. This device complies with FCC radiationexposure limits set forth for an uncontrolled environment.IC Statement1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject tothe following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesiredoperation of the device.2. Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.IC Radiation Exposure StatementThis equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance 20cmbetween the radiator & your body.Disposal and RecyclingYou must dispose of this product properly, according to local laws and regulations. Because thisproduct contains electronic components and a battery, it must be disposed of separately fromhousehold waste. Contact local authorities to learn about disposal and recycling options. 32Manufactured under license from Dolby Laboratories.Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. This product qualifies for ENERGY STAR in the “factory default”setting and this is the setting in which power savings will beachieved. Changing the factory default settings or enablingother features will increase power consumption that couldexceed the limits necessary to qualify for ENERGY STAR rating.We want to help you save energy.with minimum distance 20cm between the radiator & your body.This equipment should be installed and operated
© 2015 NAKAMICHI (USA) LLC. ALL RIGHTS RESERVED.1509-US-EN-REV A

Navigation menu