WOW Technologies TWSPK Bluetooth Speaker User Manual TW22
WOW Technologies (Singapore) Pte Ltd Bluetooth Speaker TW22
User Manual
Your Unit is designed and manufactured to operate within defined design limits, and misuse may
result in electric shock or fire. To prevent your Unit from being damaged, the following rules should
be observed for its installation, use, and maintenance. Please read the following safety instructions
before operating your Unit. Keep these instructions in a safe place for future reference.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with a dry cloth.
•Do not block any ventilation openings. Install in accordance wit h the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat reg isters, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched, particuly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip- over.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•To reduce the risk of electric shock or component damage, switch off the power before connecting
other components to your Unit.
•Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a
liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
•Always use the accessories recommended by the manufacturer to in sure compatibility.
•When moving your Unit from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric
shock, or component damage.
•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Unit and to protect it from overheating, be sure these openings are not
blocked or covered. Do not place your Unit in a bookcase or cabi net unless proper ventilation is
provided.
•Never push any object into the slots and openings on your Unit enclosure. Do not place any objects
on the top of your Unit. Doing so could short circuit parts caus ing a fire or electric shock. Never spill
liquids on your Unit.
•When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power,
unplug the power cord.
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
WARNING: To reduce the risk of fire or electric shock, do not ex
IMPORTANT SAFETY INSTRUCTIONS The wall socket should be located near your Unit and be easily accessible.
Keep your Unit away from moisture. Do not expose your Unit to ra in or moisture. If water penetrates
into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result
in fire or electric shock.
Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the
power cord and contact your dealer immediately. Do not try to repair your unit yourself.
Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the
internal components may function abnormally. Unplug the power cord immediately and contact your
dealer for repair.
Continued use of your Unit may cause fire or electric shock.
Do not install your Unit in an area with heavy dust or high humi dity. Operating your Unit in
environments with heavy dust or high humidity may cause fire or electric shock.
Ensure that the power cord and any other cables are unplugged before moving your Unit.
When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for
an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the
battery to leak which can damage the remote control or injure the operator.
The marking label of the subwoofer was located on the external bottom enclosure of the product.
The equipment shall be used at maximum 35 degree Celsius ambient temperature.
See the important note and rating located on the back of the unit.
WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any
container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping,
splashing, rain, or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wallin accordance with the
installation instructions.
CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or
specified type.
Do not leave the batteries exposed to direct sunlight for a longperiod of time with doors and windows
closed. Do not disassemble the batteries or dispose of it in fire .
Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
pose this apparatus to rain or moisture.
This lightning flash with arrowhead symbol within an equilateraltriangle is intended
to alert the user to the presence of not isolated dangerous voltage within the
product that may be sufficient magnitude to constitute a risk of shock to persons.
This lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of not isolated dangerous volt age within the
product that may be sufficient magnitude to constitute a risk of shock to persons.
Warning: This equipment is a Class II or double insulated electrical appliances. It
has been designed in such way that it does not require a safety connection to
electrical earth.
has been designed in such way that it does not require a safety
•
TABLEOF CONTENTS
Package Contents ………………………………………………………………………………………………… 4
Controls and Connections ………………………………………………………………………………………… 5
First Time Set Up …………………………………………………………………………………………………. 8
Using the Remote ………………………………………………………………………………………………… 14
EQs Modes on your Remote ……….………………………………………………………………………… 15
Functions on your Remote ……………………………………………………………………………………….. 16
Using Bluetooth Mode …….……………………………………………………………………………………… 17
Connecting with HDMI TV (ARC) ……..………………………………………………………………………… 18
Advanced Setup ………………………………………………………………………………………………….. 20
Advanced Setup – HDMI TV (ARC) …………………………………………………………………………….... 21
Help and Troubleshoot…………………………………………………………………………………………… 22
Warranty Clause & Support …………….………………………………………………………………………… 23
Specifications……………………………………………………………………………………………………… 24
Legal and Compliance…………………………………………………….……………………………………… 25
Package Contents ………………………………………………………………………………………………… 4
Controls and Connections ………………………………………………………………………………………… 5
First Time Set Up ………………………………………………………………………………………………… 8
Using the Remote ………………………………………………………………………………………………… 14
EQs Modes on your Remote ……….…………………………………………………………………………..... 15
Functions on your Remote ……………………………………………………………………………………… 16
Using Bluetooth Mode …….……………………………………………………………………………………… 17
Connecting with HDMI TV (ARC) ……..………………………………………………………………………….. 18
Advanced Setup ………………………………………………………………………………………………… 20
Advanced Setup – HDMI TV (ARC) 21
Help and Troubleshoot………………………………………………………………………………………… 22
Warranty Clause & Support …………….…………………………… 23
Specifications……………………………………………………………………………………………………… 24
Legal and Compliance…………………………………………………….………………………………………... 25
* Not all TVs have the audio outputs shown above. To connect the To w e r
Speakers directly to yourother devices(Blu-Ray player,game system,etc.)see
your device’s user manual.
* Cables appearance may differ from the ones supplied.
† When using either of the Digital Inputs, if thereis no audio:(A) trysetting
theTV outputto PCM or (B) Connect directlyto your Blu-ray/other source,
some TVs do not pass through digital audio.
‡ Cablenot included.
* Not all TVs have the audio outputs shown above. To connect the
Tower Speakers directly to your other devices(Blu-ray player, game system,
etc)see your device’s user manual.
INPUT
TREBLE-TREBLE+
BASS+BASS-
VOL+
MUSIC
NEWS
GAME
INPUT
MOVIE
SPORTS
NIGHT
BT-PAIR
RESET
MUTE
Play//Pause
Press to play/pause the track in
Bluetooth or USB mode.
E1
E2
E3
E4
E5
E6
EQ MODES ON YOUR REMOTE CONTROL
Press either MUSIC, MOVIE, NEWS, SPORTS, GAME or NIGHT EQ setting on your remote to toggle between each EQ settings.
Each EQ setting will be displayed on the Tower Speakers LED display.
U15
AUX1 AUX2 ARC
OPT
COA US B
U00 U32
-5 5
-5 5
FUNCTIONS ON YOUR REMOTE
Press the buttons on the remoteto access the different functions and acoustic settings of the Tower Speakers.
Each function and setting will be displayed on the Tower Speaker’s LED display.
INPUT
USING BLUETOOTH MODE
Your Tower Speakers supports music streaming from
smartphones ,tablets, and computers with Bluetooth capability.
Device compatibility will vary,see your device’s documentation
for more information.
Once you have paired your source device to the SoundBar, as
long as you stay within range of the your device
should remain paired.
If the input is changed, the Bluetooth device will disconnect.If
the source is changed back to Bluetooth, any paired Bluetooth
device will reconnect automatically. Note: Reconnecting time
may differ by different devices.
Tower Speakers,
Tower Speakers.
INPUT
CONNECTING WITH HDMI TV (ARC)
What is HDMI Audio Return Channel (ARC)?
Using HDMI ARC, your TV can send audio to the
Tower Speakers using a HDMI cable.
You will need to connect your tower speakers to your
TV’s HDMI ARC port using a HDMI cable that is
ARC compatible.
• HDMI ARC port location may differ by TV manufacturer.
See your TV’s user manual for more inform ation.
Thereis no power.
Thereis no sound.
I hearbuzzingor humming.
The remote isn’t working.
• Press the POWER button on the remote controlor on the front panel of your Tower speakers.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outletto verify that the outlet is working correctly.
• Increasethe volume.PressVol + on the remote control or on the front panel of your Tower speakers.
• Press MUTE on the remoteto ensurethe Tower Speakers is not muted.
• Press SOURCE on the remote or on the front panel of your Tower speakers to select a different input source.
• When using either of the Digital Inputs,if thereis no audio:(A) Try setting the TV output to PCM or (B) Connect directly
to your Blu-ray/other source, some TVs do not pass through digitalaudio.
• On digitalinputs,the inputLEDs will flash if an unsupported format ispresent. Set the source tooutput PCM.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD,not
VARIABLE. Consultyour TV’s user manual for more detailed information.
• If using Bluetooth,en sure that the volume on your source device is turned up and that the device is not muted.
• Ensure all cables and wires are securely connected.
• Connect a different source device(TV, Blu-ray player,etc) to see if the buzzing persists.If it does not, the problem may
be with the original device.
• Connect your device to a different inputon the Tower Speakers.
• Replace the remote batteries with new ones.
• Point the remotedirectlyat the center of the Tower Speakers when pressinga button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application. (e.g.,Pandoradoesn’t supportthe Back button.)
HELP& TROUBLESHOOTING
Nakamichi LLC ( “Nakamichi” ) warrants to th
purchasers who purchase this Product from Nakamichi’s authorized retailers (“NakamichiRetailers”).This warranty will terminate automatically prior to
If upon examination at Nakamichi’s Support Centre it is determined that the unit was defective in materials or workmanship at anytime during this
FCC STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference; and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC CAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interferencein a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.
—Consult the dealer or an experienced radio/TV technician for help.
caution the user that changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
