Wacal SIM200 GPRS VEHICLE TERMINAL User Manual

Download:
Mirror Download [FCC.gov]
Document ID	768487
Application ID	mOP+UJZyOjqjJ/+uSOL9Gg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.67kB (20842 bits)
Date Submitted	2007-03-15 00:00:00
Date Available	2007-03-16 00:00:00
Creation Date	2007-03-13 18:05:25
Producing Software	pdfFactory Pro 2.46 (Windows XP Home Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual.doc
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	Owner

INSTRUCTION FOR THE FLEET MANAGEMENT
ON-VEHICLE TERMINAL
P3CSIM200 is an on-vehicle terminal specially designed for the managing of
commercial vehicle fleets. The terminal can transfer the GPS longitude and latitude
data of vehicles to the severs of service providers in real time. The terminal works
on three frequencies, 900, 1800, and 1900. Service providers can optimize the
settings of the terminal according to the requirement of customers and the cost of
using local GPRS networks. P3CSIM200 terminal can provide:
1. Transferring GPS data, which include: longitude and latitude information, time,
speed of vehicle and driving direction. The GPS data collection interval can
be preset between 10 seconds and 60 minutes.
2. At the same time of transferring GPS data, the terminal can report to the servers
of the signal strength of the GPRS networks according to the preset interval. So
service providers can know if the on-vehicle GPRS antenna is installed properly
and working properly.
3. At the same time of transferring GPS data, the terminal can report the working
temperature of its self to the service providers according to the preset interval, so
service providers can know if the terminal is installed in a right location.
4. The terminal can estimate if there are any data drifting, and thus can delete most
of the drifting data.
5. There is a 1m internal memory for the terminal, so all the data can be saved
when there is a communication problem, when everything is back to normal, the
data can be transfer to the servers.
6. The backup battery can let the terminal work for 24 hours. When the external
power is cut off, the terminal can send power off alarm signals to the servers.
7. The terminal has 4 input circuits. According to the requirement of customers,
service providers can transfer data, which include: if the vehicle engine is turned
on or turned off, the doors are opened or closed, if the seatbelts are used, or in
the case of a direct link with vehicle’s alarm system, if there is a activation of the
alarm system, to the servers according to preset intervals.
8. Through 4 input circuits, the servers can command the terminal to cut off the
vehicle’s electrical power supply, the fuel line, or activate the alarms, according
to the customer’s demand, all above mentioned actions can be taken at the same
time or one from each other.
Warning
FCC regulations state that:
1. The Grantee of a license has the responsibility of assuring that all equipment operated under that license
confirms to the specifications of the license.
2. The RF power output of a radio transmitter shall be no more than that required for satisfactory technical
operation considering the area to be covered and local conditions.
3. The frequency, deviation, and power of a radio transmitter must be maintained within specified limits. It is
recommended, therefore, that these three parameters be checked before the station is placed in service.
REMEMBER
The efficiency of the equipment depends upon a good installation. Manufacturer recommends that adjustments
to this equipment be made ONLY by a certified technician.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment accessories are approved by FCC and only accessories from Manufacturer are qualified for this
equipment applications. Detail information see FCC part 15.27.
IMPORTANT
(a) Only shielded cables, antennas, and special connectors from Manufacturer can be used in this system.
Information detailing any alternative method used to supply the special accessories shall be must be approved
by FCC and included in the application for a grant of equipment authorization or retained in the verification
records, as appropriate. The party responsible for the equipment shall ensure that these special accessories are
provided with the equipment. The instruction manual for such devices shall include appropriate instructions
on the first page of the text concerned with the installation of the device that these special accessories must be
used with the device. It is the responsibility of the user to use the needed special accessories supplied with the
equipment.
(b) If a device requiring special accessories is installed by or under the supervision of the party marketing the
device, it is the responsibility of that party to install the equipment using the special accessories. For
equipment requiring professional installation, it is not necessary for the responsible party to market the special
accessories with the equipment. However, the need to use the special accessories must be detailed in the
instruction manual, and it is the responsibility of the installer to provide and to install the required accessories.
(c) Accessory items that can be readily obtained from multiple retail outlets are not considered to be special
accessories and are not required to be marketed with the equipment. The manual included with the equipment
must specify what additional components or accessories are required to be used in order to ensure compliance
with this part, and it is the responsibility of the user to provide and use those components and accessories.
(d) The resulting system, including any accessories or components marketed with the equipment, must comply
with the regulations.
IMPORTANT INFORMATION
(FCC Part 15.105)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Title                           : Users Manual.doc
Author                          : Owner
Creator                         : pdfFactory Pro www.fineprint.cn
Producer                        : pdfFactory Pro 2.46 (Windows XP Home Chinese)
Create Date                     : 2007:03:13 18:05:25+08:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools