Wacom Co DTF720A LCD TABLET User Manual DTF720AB E indb

Wacom Co Ltd LCD TABLET DTF720AB E indb

Contents

Manual 1

Download: Wacom Co DTF720A LCD TABLET User Manual DTF720AB E  indb
Mirror Download [FCC.gov]Wacom Co DTF720A LCD TABLET User Manual DTF720AB E  indb
Document ID1060686
Application ID94W8R7khmN90aJUaRCsIMg==
Document DescriptionManual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize156.3kB (1953805 bits)
Date Submitted2009-01-22 00:00:00
Date Available2009-02-15 00:00:00
Creation Date2009-01-22 13:24:05
Producing SoftwareAcrobat Distiller 7.0.5 for Macintosh
Document Lastmod2009-01-22 13:24:41
Document TitleDTF720AB(E).indb
Document CreatorAdobe InDesign CS (3.0.1)
Document Author: OSX01

ENGLISH
DTF-720AB User's Guide
Table of Contents
Safety Precautions ..................................................2
Component Functions ..............................................5
Adjusting the stand ............................................................................... 6
Installing DTF-720AB on a Mount Arm ................................................... 6
Accessory Check .....................................................7
Connecting DTF-720AB ..........................................8
Installing DTF-720AB Driver ....................................10
Windows Setup .................................................................................... 10
Mac OS X Setup ................................................................................... 11
Uninstalling the Tablet Driver ................................................................. 11
The DTF-720AB Display ...........................................12
The Auto-Adjust Function....................................................................... 12
The DTF-720AB Power Saving Function .................................................. 12
Blurring and Protrusion of the Picture from the LCD Panel... ...................... 13
On-Screen Display (OSD) Menu Buttons ................................................. 14
Using the OSD Menu ............................................................................ 14
Basic operation ......................................................17
How to use the Tablet Buttons ................................................................. 17
Using the Control Panel...........................................18
Displaying the Control Panel .................................................................. 18
Control Panel Basics .............................................................................. 18
Synchronizing the Positions of the Pen Tip and Pointer ............................. 21
Using Multiple Interactive Pen Displays ...................22
Supplementary Information ....................................23
Removing Stains ................................................................................... 23
Replacing the Pen Nib ........................................................................... 23
Troubleshooting ......................................................24
Display Troubleshooting ........................................................................ 24
Pen Troubleshooting (For Both Windows and Macintosh) ......................... 25
General Troubleshooting ....................................................................... 25
Troubleshooting for Windows ................................................................ 25
Troubleshooting for Macintosh ............................................................... 26
Specification ...........................................................26
Obtaining Technical Support
DTF720AB(E).indb 1
.................................27
09.1.15 0:35:12 PM
Safety Precautions
The following symbols appear throughout this user guide in order to ensure safe use of
the DTF-720AB (hereafter referred to as “DTF-720AB,” “the product” or “this product”).
Please read these items carefully and always heed the Warning and Caution items when
using your DTF-720AB.
Warning
Caution
This symbol indicates an item that, if ignored when handling the product,
could lead to the loss of life or serious injury.
This symbol indicates an item that, if ignored when handling the product,
could lead to injury or damage to personal property.
Meanings of Symbols:
Indicates that it is important to be careful when taking the action or actions noted.
Indicates that the action or actions noted are to be avoided.
Indicates it is important to take the action or actions noted.
Warning
■ Do not use the product in a facility
control system that requires an
extremely high level of reliability.
This product may cause other electronic
devices to malfunction, or other devices
may cause this product to malfunction.
■ Turn this product off in places where
the use of electronic equipment is
prohibited.
In airports, hospital intensive care units
and other such places where the use
of electronic equipment is prohibited,
this product may adversely affect the
operation of other electrical devices.
In order to prevent this, when in such
locations, always disconnect the product’
s USB connector from your computer
and turn off the switch.
■ Do not open the back cover.
Inside this product there are several
high-voltage parts. Persons other than
professional service personnel should
never open the back cover of this
product. Unauthorized opening of the
back cover may lead to fire or electric
shock.
■ When this product ceases to operate
normally due to being dropped or a
similar cause, remove the power source
cable from the electrical outlet.
■ Regarding the power plug and power
adapter.
-Please remove dust from the power
plug regularly. The addition of moisture,
etc. to accumulated dust may lead to
fire.
-Please do not use any power adapters
other than those included with the
product. Ignoring this warning may
result in fire or product failure.
-Please do not damage or forcibly
bend or bundle the power adapter
cord. Also, please do not place heavy
objects on it or expose it to excessive
heat. Ignoring this warning may result
in fire, electric shock or product failure.
-In the unlikely case that the power
adapter should produce smoke or a
strange odor, please disconnect it from
the wall outlet and return it to either the
store where you purchased it or to the
Wacom Customer Support Center for
repair service.
-Please do not connect or disconnect
the power adapter with wet hands.
Ignoring this warning may result in
electric shock or malfunction.
-Please do not open or otherwise
change the power adapter. Ignoring
this warning may result in fire or
electric shock.
Leaving the power cable connected may
result in fire or electric shock.
DTF720AB(E).indb 2
09.1.15 0:35:12 PM
Caution
■ Do not use organic solvents to clean
■ When not using this product for a long
this product.
period of time
When cleaning the product, never use
such organic solvents as alcohol. Such
solvents may cause discoloration and
deterioration in quality.
For safety reasons, when you will not be
using the product for a considerable length
of time, disconnect the power adapter from
the electrical outlet.
■ Do not let the product get wet.
■ Do not use this product in a dusty
environment.
Please do not place containers
such as cups and vases containing
water near the product. Coming in
contact with water or other liquids may
cause product failure.
■ When cleaning this product, always
disconnect the USB connector.
When cleaning the product, always
disconnect the USB connector from the
USB port of the computer. Failure to do
so may result in electric shock.
■ While this product is in use, avoid
placing any metal objects on it.
Do not place any metal objects on the
product while you are using it. This may
result in malfunction or product failure.
■ Do not touch any liquids that may be
leaking from this product.
The liquid contained in the product is
an irritant. In the unlikely case that such
liquid should leak, never touch it with bare
hands. In case of contact with skin, mouth
or eyes, rinse immediately with running water and
continue rinsing for 15 minutes or longer. Also
consult a physician.
■ Do not use excessive force with the cable.
Please do not step on, or place heavy
objects on any of the product’s cables.
Also, do not apply excessive force to the
base of the cable or repeatedly bend
and stretch it, as this may cause it to break or
malfunction.
■ Do not place the product on unstable
surfaces.
Do not place the product where it is
likely to totter, lean or be exposed to
strong vibrations. Doing so may lead
to the product falling, resulting in
injury and/or product failure.
■ Do not place heavy objects on the product.
Do not put excessive weight, or place
heavy objects on the product. These
actions may cause product failure.
■ When connecting the power plug
When plugging the power adapter into an
electrical outlet, also connect a grounded
wire.
Dust can cause damage to the product.
■ Do not block the ventilation holes on
the backside of the product.
Blocking these holes may cause internal
overheating and subsequent damage.
■ Do not pick up the product by its stand.
If excessive force is used in handling the
stand, its open and close function may
become damaged. When picking up the
product, always pick it up by the body.
■ Regarding the Pen
-Do not strike hard objects with the
metal Pen. Doing so may cause
damage to the product.
-Be careful to not allow small
children to put either the pen or
the spare nib into their mouths.
There is the danger that the
nib or side switch may be accidentally
swallowed or that the pen may be
damaged.
■ Do not place the product in either very
hot or very cold places.
Do not place the product in very hot (35
degrees centigrade or more) or very cold (5
degrees centigrade or less) locations. Also,
avoid placing it in locations with severe
temperature fluctuations as this may adversely
affect the product and cause product failure.
■ Do not disassemble the product.
Do not disassemble or modify the
product, as these actions may
lead to fire, excessive generation
of heat, electrical shock or injury.
The guarantee on the product
will become null and void if the
product is ever disassembled.
■ Do not connect or disconnect any cable
while the product or your computer is on.
Do not connect or disconnect any cable
(including the USB cable) or the power
adapter while your computer or this
product is turned on. This may cause
damage to the product or to your computer.
DTF720AB(E).indb 3
09.1.15 0:35:13 PM
Please take the following precautions
to protect the health of your eyes.
● When using the product, make sure that the room
is sufficiently illuminated and be careful not to get
your face too close to the screen.
● Take regular breaks when using the product over an
extended period of time.
Warranty Exclusions
● Wacom will not bear any responsibility for damage
caused by fire, earthquake, accidents caused by
third persons, intentional or accidental abuse by the
customer or any other damage caused by abnormal
use of the product.
● Wa c o m w i l l n o t b e a r a n y r e s p o n s i b i l i t y f o r
contingent damages (such as loss of business
profits, suspension of operations, alterations to and
disappearance of data, etc.) caused by use of, or
inability to use, this product.
● Wacom will not bear any responsibility for damage
resulting from the use of this product in a fashion
other than as explained in this user guide.
● Wacom will not bear any responsibility for damage
resulting from malfunctions caused by using this
product in conjunction with adaptation equipment or
other company’s software.
Regarding this User's Guide
This user's guide contains instructions regarding the
set up, installation, functions and methods of use of
this product. The product consists of the LCD monitor
and the tablet, which will act as two distinct pieces of
equipment to be used in conjunction with your computer.
First, you will set up the display device and then you will
install the tablet driver in your computer. You will then be
able to use this product as a built-in display tablet.
Analog RGB compatible video output is necessary
for the screen display of this product. For information
regarding how to use video cards, refer to the instruction
manual accompanying the video card.
Please be aware of the following
regarding the LCD display.
Depending on what is being displayed, bright or dark
green, red and blue dots may show up on a very
small portion of the LCD display screen. These do not
indicate product failure or a lack of quality.
Regarding Trademarks
● Wacom is a trademark or registered trademark of
Wacom Company, Limited.
● Windows is a trademark of Microsoft Corporation,
registered in the United States and other countries.
● Macintosh is a trademark of Apple Computer, Inc.,
registered in the United States.
● Other product names and related items are the
trademarks or registered trademarks of each
concerned company.
Precautions
1 Wacom Company, Ltd. holds the copyright to the
auxiliary tablet.
2 The unauthorized duplication or reproduction in
whole or in part of the tablet driver or this user guide
is expressly prohibited.
3 Wa c o m r e s e r v e s t h e r i g h t t o c h a n g e t h e
configurations or specifications of the tablet driver
or the product, as well as the contents of this user
guide, without prior notice.
As a participant in the Energy Star program,
Wacom has determined that this product meets
the standards of the Energy Star program.
DTF720AB(E).indb 4
09.1.15 0:35:14 PM
Component Functions
Front
Menu Button →P14
ー Button
+Button
ENTER Button
Status LED
The Status LED becomes blue to
indicate pen activity.
Power LED
An orange light indicates that power is
being supplied. A blue light indicates
that power and a video signal is being
supplied.
Power Switch
Application Software
Buttons
Integrated LCD Monitor
and Tablet
Tablet Buttons
→P17
Back
Pen Rest
Place the pen here while the pen is not in use.
Stand Adjustment Lever→P6
Connector Ports→P8-9
Stand→P6
Pen Tether hole
USB2.0Hub
A USB 2.0 hub is available on both the left and
right sides of the DTF-720AB.
DTF720AB(E).indb 5
09.1.15 0:35:15 PM
Adjusting the Stand
1Pull up on the stand adjustment lever.
Caution
Please hold the stand carefully as
you adjust it to prevent injury or
damage to the product.
2Lower the stand carefully.
Installing DTF-720AB on a Mount Arm
This product conforms to the Video Electronics Standard Association’s (VESA) Flat
Panel Monitor Physical Mounting Interface Standard (FPMPMI).
This product can be removed from the stand and mounted on such apparatuses as
a VESA-standard mount arm. In order to do this, M4/0.7 mm screws, which are not
included with the product, are needed. Use screws that will, at the time of installation,
penetrate the surface of the product by no more than 15 mm. Use of longer screws
may result in damage to internal parts of the
product.
Make sure that both your computer and the
product are turned off and that all cables are
disconnected.
2Place the display unit face down on a flat
surface. To prevent harm to the front of the
unit, first spread a cloth or similar material on
the flat surface as a cushion.
3Remove the four screws that hold the stand to
the unit.
4Using four M4/0.7mm screws, securely mount
the arm or similar apparatus to the back of the
unit.
5Connect the cables and save the screws that
you removed in step 3.
Caution
When installing the unit on a mount arm or
other stand, always follow the directions in
the instruction booklet for the mount arm or
stand, as well as the instructions contained
in this document. Incorrect installation may
result in the product coming loose and falling,
possibly causing product failure.
DTF720AB(E).indb 6
09.1.15 0:35:15 PM
Accessory Check
● Pen
● Power Adapter
● User's Guide (This booklet)
● Power Cables
EU type
User's Guide
● Tablet Driver CD-ROM
● Application CD-ROM
AU type
TW type
● Pen Tether
● Analog RGB Cable
● Adapter Plug (UK type)
● USB Cable
Do no throw the box away; it is useful for the storage and transport of the product.
DTF720AB(E).indb 7
09.1.15 0:35:16 PM
Connecting DTF-720AB
1Be sure that the power is off on both your computer and the product.
2Connect the Analog RGB cable to your computer’s display port.
3Connect the power adapter to the power cable and connect the DC power connector to
the DC power input terminal. Next, plug the power cable into your electrical outlet.
4Turn on the product’s power switch.
The Power LED lamp will flash blue then turn orange.
5Turn on your computer.
6While looking at the LCD screen, configure the color resolution and size settings.
- Do not modify the refresh rate. Setting the rate to a value that exceeds the DTF-720AB
refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as follows:
High Color (16 bit) → 65,536 colors / True Color (24 bit) → 16,777,216 colors
*The number of colors is limited by the efficiency of your computer and video card. For details,
refer to the user’s manual provided by the manufacturers.
7Connect the product to the computer using the USB cable. You may notice that the pen
now responds when placed near the screen surface, but will function properly only after
the driver has been installed.
8Install the DTF-720AB driver (Please refer to “Installing DTF-720AB Driver” on page 10).
DTF720AB(E).indb 8
09.1.15 0:35:17 PM
7
Computer
USB connector
USB cable
To USB port
Connectors Area
DC Power Input Terminal
Outlet
Power cable*
DTF-720AB Rear View
Power Adapter
Computer
Analog RGB connector
(Input)
Analog RGB connector
(Output)
Analog RGB cable
To analog RGB port
To monitor or projector
* Please use the proper power cord or adapter plug for your region.
DTF720AB(E).indb 9
09.1.15 0:35:17 PM
Installing DTF-720AB Driver
Windows Setup
Before installation, connect the DTF-720AB USB cable to your computer and turn the
unit on.
Please note that the driver for Windows 98 SE and Me are no longer included on the
tablet driver CD-ROM. If you plan to use your DTF-720AB with a PC running Windows
98 SE or Me, please download the appropriate driver from http://www.wacom-asia.com/
download/download_index.html
Installing the Tablet Driver
1Insert the tablet driver CD into the CD-ROM drive. The install menu should automatically
display. If the menu does not display, double-click on the INSTALL icon (located on the
CD).
2The install menu will appear. When you click on INSTALL TABLET, the LICENSE AGREEMENT dialog will appear.
3Click Accept.
4When the installation finishes, click OK.
5Next, install the button driver.
6Click NEXT in the WELCOME TO WACOM BUTTON DRIVER VER.x.xx SETUP dia
log.
7 The LICENSE AGREEMENT dialog will appear. Click Next.
8Follow the prompts to install the driver software.
9 The INSTALLWIZARD COMPLETE dialog will appear. Click FINISH.
10Return to the install menu. Click FINISH.
11See "How to use the Tablet Buttons" section (P17) for more info about tablet buttons.
10
DTF720AB(E).indb 10
09.1.15 0:35:18 PM
Mac OS X Setup
1Connect the USB cable to your computer, turn on the product and start up your Macintosh.
2Close any open applications and temporarily turn off any virus-monitoring programs.
3Insert the Tablet Driver CD-ROM into your computer’s CD-ROM drive and open the
CD-ROM and double-click on Install or Install.app.
*After installing OS X, input your password.
4Click on Install Wacom Tablet and installation will begin. Thereafter, follow the screen
instructions and continue the installation process.
If during processing, the identity confirmation dialog box displays, input your password *.
5 After the tablet driver installation is complete, restart Macintosh.
Macintosh OS x 10.2 and newer versions include as a standard feature the
Inkwell function. If this function is on, the yellow Inkwell memo pad will appear
after installation of the Tablet Driver. To disable this function, click on Ink from
the Control Panel, click on Settings and remove the checkmark from Allow Me to
Write Anywhere.
Uninstalling the Tablet Driver
Windows
When uninstalling the tablet driver from your PC follow the instructions below. (These
instructions are the same for Windows XP/2000/Me/98SE.)
*Users of Windows XP/2000 with system administrator settings in place (administrator
or administrator account) should log in with the administrator user name to uninstall the
drivers.
Click on the Windows Start button and open the Control Panel. Double click the Programs
and Features icon or the Add and Delete Program (Application) icon.
2Select Pen Tablet from the list and click the Uninstall or the Modify (Add) and Uninstall or
Delete button. Follow the instructions in the dialog box to initiate uninstall.
If Windows is restarted, it is deleted.
Macintosh
1Open the Applications folder and then open the Tablet folder.
2Start up Remove Tablet and follow the instructions to initiate uninstall.
11
DTF720AB(E).indb 11
09.1.15 0:35:18 PM
The DTF-720AB Display
The Auto-Adjust Function
In order to ensure optimal display image quality, this product utilizes the Auto-Adjust
function. When the Auto-Adjust function is operating, it may take a short time before the
screen displays properly. The settings initiated by Auto-Adjust are saved in the display.
If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the phase
and pitch of the display are adjusted automatically when the display mode is received. The AutoAdjust function becomes operational when the horizontal frequency is in the 30-80KHz and the
vertical frequency is in the 50-75Hz range.
When the Auto-Adjust function is operating, only the power switch is operational.
Pen calibration may be necessary after adjusting screen position. ( → P13)
The DTF-720AB Power Saving Function
This product is in compliance with VESA and ENERGY STAR power-saving guidelines.
When connected to a Display Power Management (DPMS)-compatible computer and
graphics board, the power savings indicated below are automatically realized during
times of non-operation.
Computer Activity
Horizontal
Synchronizing
Signal
Turned On (Normal operation mode) Yes
Stand-by Mode
No
Suspend Mode
Yes
Off Mode
No
Vertical
Synchronizing
Signal
Yes
Yes
No
No
Picture
Signal
Power
Power Lamp
Consumption
Yes
No
No
No
37W
Less than 2W
Less than 2W
Less than 1W
Blue
Orange/Blue*
Orange/Blue*
Orange
* Depending on the specifications and settings of your computer and video card, when in
standby and suspend modes, the power lamp may only light up orange.
12
DTF720AB(E).indb 12
09.1.15 0:35:19 PM
Blurring and Protrusion of the Picture from the LCD Panel
This setting is effective when the product and computer are connected by a RGB cable.
Depending on the type of computer and graphics board, the Auto-Adjust function
is sometimes not able to operate at full power, resulting in the picture blurring and
protruding from the LCD panel. If
this happens, adjust the pitch and
phase. At 1280 x 1024 pixels, the
resolution is optimally adjusted.
Procedure:
1Open the Tablet Control Panel
(see page 18) and select the
Calibrate tab.
2Click on the Calibrate... button.
An adjustment pattern for pitch
and phase will appear.
3Using the OSD buttons, open the
OSD Menu and select the Pitch icon.
4Adjust the pitch level so
the pattern of fine vertical
stripes displays evenly.
5Press the ENTER button
and return to the Menu
screen.
6In the OSD Menu, select the
Phase icon.
7Adjust the phase level so
the adjusutment pattern
shows clearly.
8After completing these
adjustments, press the ENTER and MENU buttons to exit the OSD Menu.
Adjustment pattern for pitch and phase
For Windows system except Windows XP, the pitch and phase may be calibrated after the Exit
Windows screen is displayed. If the frequency needs to be calibrated, light and
dark vertical stripes will appear in the dark areas of the screen. If the tracking needs to be
calibrated, light and shade will appear horizontally in the dark areas of the screen (for 1280 x
1024 resolution).
This method is recommended in situations where the tablet driver has not been installed.
13
DTF720AB(E).indb 13
09.1.15 0:35:19 PM
On-Screen Display (OSD) Menu Buttons
MENU
Menu button:
Opens or closes the OSD
Menu.
ー
+
­ buttons, + buttons:
You can select an option that can
be activated.After activatng a
selected option, press the + button
to increase a selected item value,
and press the - button to decrease
it.
ENTER
ENTER Button
Activates or deactivates the selected OSD
menu item.
Using the OSD Menu
Adjusting picture quality and setting up the display are accomplished by using the OSD
menu buttons to establish and change adjustment items and values. Click on the Menu
button and the OSD menu screen appears. Select the items to be adjusted and your
desired settings.
How to Use the OSD Menu
1Click on the Menu button to display the Main Menu
Example: Adjusting brightness
Settings screen.
+button can select to the right direction.
-button can select to the left direction.
2Click on the + button and the - button and select the items
to be adjusted.
+ button can increase numeric value.
- button can decrease numeric value.
3When the option you want to adjust is highlighted, press the
ENTER button.Use the + and - buttons to adjust numerical
values and other items.
4After making your change, press the ENTER button to save.
5To exit, press the Menu button.
14
DTF720AB(E).indb 14
09.1.15 0:35:20 PM
Types of OSD Menus
Contrast
Language
Select to increase
or decrease image
contrast.
Select to choose a
language option for
the OSD: English,
Deutsch, Francais,
Espanol, Italiano, or
Japanese.
Cannot be
adjusted if DIRECT
is selected in the
Color menu.
Brightness
Backlight
Select to increase
or decrease image
brightness.
Select to increase or
decrease the backlight
brightness level.
Cannot be
adjusted if DIRECT
is selected in the
Color menu.
Color
Menu Position
Provides settings for 9300K, 6500K, and
5000K Kelvin.
Also provides a User option that enables you
to adjust red, blue and green independently.
Selecting DIRECT
displays the received
signal as it is without
any adjustment.
Choose a setting to
work with and press
Enter to activate
your selection.
You can change
the user setting by
selecting the icon '
'.
In the User
Adjustment window,
change red, blue
and green to
calibrate color. To
exit, select the icon '
Select to move the
OSD menu around
the display.
Reset
Provides two
options:
Use AUTO ADJUST
to reset only the
image parameters.
Use RECALL to
reset all screen
options to the factory
default. Selecting the
exit '
'icon exits the Reset window without
resetting anything.
'.
15
DTF720AB(E).indb 15
09.1.15 0:35:21 PM
Horizontal Center
Select to move the
screen image left or
right.
To automatically
adjust, use the Reset
menu.
Vertical Center
Select to move the
screen image up or
down.
To automatically
adjust, use the Reset
menu.
Phase
Select to reduce or
eliminate horizontal
distortion lines.
To automatically
adjust, use the Reset
menu.
Pitch
Select to reduce or
eliminate vertical
distortion lines.
To automatically
adjust, use the Reset
menu.
16
DTF720AB(E).indb 16
09.1.15 0:35:22 PM
Basic operation
How to use the Tablet Buttons
The tablet buttons increase your work efficiency by making navigating through
documents and websites quick and simple.
The tablet buttons can be used in Windows-based PCs. To use the tablet buttons, install the button
driver to your PC. ( ▶ P10)
Component Functions
NO
Name
Left mouse button
Right mouse button
Scroll up button
Scroll down button
Ctrl button
4
2
Function
Works like the left mouse button.
Works like the right mouse button.
Scrolls the window up.
Scrolls the window down.
Works like the Ctrl button on the keyboard.
17
DTF720AB(E).indb 17
09.1.15 0:35:22 PM
Using the Control Panel
Change the settings for the pen and adjust the pointer and pen tip positions with the
control panel.
*When connecting and using multiple tablets, see page 22.
Displaying the Control Panel
Opening the Control Panel in Windows
Click on the Windows Start button, go to All Programs (P) or Programs (P), open Tablet
and select Pen Tablet
Opening the Control Panel in Macintosh
Open System Preferences from either the Dock, the Apple Menu or from the Applications
folder. Then click on the Pen Tablet icon.
Control Panel Basics
Select the PEN tab.
NO
Setting Item
Description
1 The second side switch Selects the side switch button functions for pens equipped with a side
switch. See page 19-20.
and the side switch
Customizes the amount of pressure needed to click or draw with the pen.
2 Tip Feel
3 Double Click Distance Adjusts the size of the double-click area. See page 19.
When checked, an audible “click” sound will be heard whenever a pen click
4 Click Sound
occurs and your computer speakers are turned on.
Returns the PEN tab settings to their factory defaults.
5 Default
When the Side Switch is set to right click or other click functions, select one
6 Advanced
of the following two modes of operation.
• Hover Click: allows you to perform click functions by pressing the Side
Switch when the pen tip is raised slightly above the active surface.
• Click & Taps: press the Side Switch and then lightly press the pen tip
against the active surface. This is the default setting for tablet PCs.
18
DTF720AB(E).indb 18
09.1.15 0:35:23 PM
Switch and Button Settings
Function Names
Description
Click
Right Click
Middle Click
4th click(Back)
Performs the same operations as a normal mouse.
5th click(Forward)
Double-Click
Click-Lock
Pop-up Menu
Erase
Keystroke
Modifier
Simulates a 4th mouse button click, which on Windows systems typically
issues the Back command in browser applications. Not available on
Macintosh systems.
Simulates a 5th mouse button click, which typically issues the Forward
command in browser applications. Not available on Macintosh systems
Simulates a left mouse button double-click. For easier double-clicking,
use this function instead of tapping twice with your pen.
Simulates holding down the left mouse button. Press the tool button once
to initiate click lock. Press the button again to release click lock. Click
lock is useful for dragging objects or selecting blocks of text.
Displays a Pop-up Menu on your screen. See page 20 for more
information.
Works like the eraser on a pencil in graphic applications that support the
Erase function.
Enables you to simulate a series of keystrokes. Selecting this option
displays the define keystroke dialog box, where you can enter a keystroke
or keystroke sequence to play back. Keystroke combinations can include
letters, numbers, function keys (such as F3) and modifier keys (such as
SHIFT, ALT, or CTRL for Windows, or SHIFT, OPTION, COMMAND, and
CONTROL for Macintosh).
Enables you to assign modifier key(s) (such as SHIFT or CTRL). Many
applications use modifier keys to constrain the size or placement of
objects. Selecting this option displays the DEFINE MODIFIER dialog box
where you can assign one or more modifier key functions.
Pan/Scroll allows you to move an open file or image within a window. This
function can only be set to the Side Switch.
In an application that does not provide a free-hand tool, scroll speed can
be set to one of 5 speeds. Move the slider to the desired setting.
•Slow: reduces scroll speed
•Fast: increases scroll speed.
Sets the button so that, when pressed, the pressure is locked at the
Pressure Hold
* Displays only with the use of the current pressure level until the button is released. For example, you can
Side Switch or Second Side Switch. paint with pressure sensitivity until you reach the bush size that you like.
Toggles between Pen Mode and Mouse Mode.
Mode Toggle
In Windows Vista and tablet PCs, this function will open the tablet PC
ITablet PC Input Panel
input panel.
Pan/Scroll
19
DTF720AB(E).indb 19
09.1.15 0:35:23 PM
Function Names
Description
Journal
This function opens Microsoft Journal, an application for Windows Vista
and tablet PC.
Opens an application or file.
This function will open a dialog box. Click Browse to select an application
or file. The selection you make appears in the Application To Run box.
Click "OK" to accept the selection.
Lets you use your pen to toggle the Ink Anywhere function of Inkwell on
and off. Note that Ink must be turned on for this button function to work.
Click on this button and all settings return to their default settings.
Disables the button function.
Open/Run
Ink Toggle
Default Settings
Disabled
Customizing the Pop-up Menu
Use the POP-UP MENU tab to define the available functions on the Pop-up Menu list.
To display the Pop-up Menu, set a tool button to the POP-UP MENU function. Whenever
you press that button, the Pop-up Menu is displayed. Select from available items in the
Pop-up Menu by clicking on them. To close the Pop-up Menu without making a selection,
click outside of the Pop-up Menu.
NO
Setting Item
Button function
Remove
Pop-up Items
Pop-up Font and Font Size
Default
Description
Select a button function to add to the Pop-up Menu list.
Removes the selected item from the list.
Displays a list of functions that have been added to the
Pop-up Menu. To change the order of an item, drag it to
a new location. Double-click on an item to make edits.
Sets the FONT and FONT SIZE of the Pop-up Menu.
Returns all tab settings to their default values.
This action will delete all Pop-up Menu items that have
been defined.
20
DTF720AB(E).indb 20
09.1.15 0:35:23 PM
Synchronizing the Positions of the Pen Tip and Pointer
Make the necessary adjustments so that when the pen nib is brought near the LCD
screen, the pointer displays properly in the area where the pen nib is placed.
*Please refer to pages 12 and 13 to make screen image adjustments.
*Please refer to page 22 when using multiple Interactive Pen Displays.
1Click on Calibrate... and the screen used for
making adjustments will appear.
2Click in the middle of the cross mark in the
upper left-hand corner of the screen while
sitting in your normal seating position with
the pen nib and the cross mark will move to
the bottom right-hand side of the screen.
3Click again in the middle of the cross mark
that is now in the bottom right-hand corner
of the screen while sitting in your normal
seating position and the cross mark will
disappear. The process of synchronizing
positions is now complete.
Click on the OK button in the
lower part of the screen to close
the screen.
21
DTF720AB(E).indb 21
09.1.15 0:35:24 PM
Using Multiple Interactive Pen Displays
When multiple Interactive Pen Displays are connected and are to be used, it is
necessary to set up the pen and calibrate for each Interactive Pen Displays individually.
Please follow the procedures below to carry this out.
1Bring the pen tip near the display for which the setup is to take place. Verify that the pointer moves in conjunction with the pen tip.
2Open the control panel. (P18)
3Open the Calibrate tab and verify that the correct monitor name is displayed in the Monitor field.
● If Another Monitor Name is Displayed in the Monitor Field...
The control panel of a different Interactive Pen Display is being displayed. Press the
ESC key on the keyboard to close the control panel and, beginning with Step 1,
repeat the above procedure to display the correct control panel.
*If the monitor name is changed without displaying the control panel, the display will not be able to be set
up.
【Important】
When more than one Interactive Pen Display is connected, the control panel of the last display to
recognize the pen tip is displayed. Even after identifying the pointer, if you use the pen on
another display to open its control panel, the pen tip is recognized and the control panel of this
display opens. Please refer to the following example.
Example > Setting up display A when display A and display B are connected.
1. The pointer is identified by display A.
2. The control panel of display A is displayed. → OK
The pen is used on display B to display the control panel → NOT OK (This carries out the
setup of display B)
The computer mouse is used on display B to display the control panel → OK
4Please refer to pages 12 and 13 to make screen image adjustments.
To set up the pen, open the PEN tab, refer to “Switch and Button Settings” on page 19
and carry out the setup.
5Repeat Steps 1 – 4 to set up another tablet.
22
DTF720AB(E).indb 22
09.1.15 0:35:24 PM
Supplementary Information
Removing Stains
If the product casing or pen becomes soiled, wipe off with a clean, soft cloth.
If this fails to remove the stains, soak a clean, soft cloth with a water-diluted detergent
mixture, wring thoroughly and wipe off.
If the protective covering for the LCD display becomes soiled, wipe with a dry, soft cloth.
If the stain is difficult to remove, try moistening the cloth slightly.
Do not use detergents for cleaning. The use of detergents may adversely
affect the performance of the pen. Also, do not use organic solvents, as they
may cause surface discolouration.
Replacing the Pen Nib
When the pen nib becomes worn down so that it is 1mm or less in length, replace it as
shown in the illustration below. If the pen nib becomes worn down and angular in shape,
it can easily damage the surface of the protective covering of the LCD display.
Remove the pen nib
Insert a new nib
Using a pair of tweezers or a
similar tool, pull the nib out of
the pen.
Insert the new nib, firmly pushing
it in until it stops.
Please prevent children from placing the pen or pen nib in their mouths.
There is the danger that the nib may be pulled out and swallowed. If the pen
is placed in the mouth, it may be damaged.
23
DTF720AB(E).indb 23
09.1.15 0:35:25 PM
Troubleshooting
Display Troubleshooting
If One of These Messages Should Appear...
Message
What to Do
Prior to connecting the product, if you have a monitor that you have been
using, connect it and then adjust the horizontal frequency to 30–80 kHz
and the vertical frequency to 50 –75 Hz. Connect the product.
- Verify that the video signal cable* is connected.
- Verify that the video signal cable connector pins are not bent or broken.
• When the computer goes in to power saving mode, move the mouse or
press any keyboard key.
• Verify that the computer graphics board is correctly installed.
• Verify that the video signal cable is connected.
• Verify that the video signal cable connector pins are not bent or broken.
• If you are using a cable other than the video signal cable that was
included with the product, this message may appear prior to the computer
going into power-saving mode. The product is not out of order. Use the
cable that was included to connect the product.
If One of These Conditions Should Appear...
Condition
What to Do
The power lamp lights up orange or orange and blue.
• Verify that the video signal cable is connected.
• Verify that the video signal cable connector pins are not bent or broken.
• When the computer goes in to power saving mode, move the mouse or
press any keyboard key.
• Verify that the computer graphics board is correctly installed.
• Verify that the power cable is connected and turn the power switch on.
The power lamp doesn’t light
up and the screen doesn’t display.
The screen doesn’t display
even when the power switch
is turned on.
The picture is distorted
The picture appears wavey
The picture flickers
•Adjust the pitch and phase.
•Verify that your computer display adapter is compatible with the product.
•Verify that the graphics mode and frequency for the input signal are
compatible with the product.
•Adjust the computer’s refresh rate (vertical frequency) for optimal display.
The picture is not clear
•Adjust the contrast and brightness.
•Adjust the pitch and phase.
•Set your computer’s resolution to SXGA (1280 x 1024).
The picture appears doubled
or in triplicate
•Do not add an extension to the video signal cable and refrain from using
the input selector.
•Connect the video signal cable firmly to the connector.
•Adjust the pitch and phase.
•Adjust the horizontal and vertical positioning. Depending on the input
signal and video card, the picture may not entirely fill the screen.
•Adjust the brightness.
The picture is out of position
The picture size is incorrect
The picture is dark.
Waves and vertical stripes
appear in the picture.
The picture colour is uneven.
The colour white does not
display as white.
•Adjust the pitch and phase.
•Adjust the colour temperature.
* Video signal cable indicates both USB cables (see page 7).
24
DTF720AB(E).indb 24
09.1.15 0:35:25 PM
Pen Troubleshooting (For Both Windows and Macintosh)
What to Do
Condition
The pen nib produces a click
even when only very lightly
coming in contact with the
screen.
The pen does not produce
a click unless excessive
pressure is used.
The pen nib produces a click
prior to coming into contact
with the screen.
The pen nib do not work.
The pen cannot be doubleclicked using the pen nib.
The pressure function cannot
be used.
Use the control panel to set the pen nib sensitivity to Firm setting.
Use the control panel to set the pen nib sensitivity to Soft setting.
Use the control panel to set the pen nib sensitivity to Firm setting.
When the status lamp turns blue in response to the pen nib being moved
to close proximity to the screen, either the pen or the tablet is probably
defective.
Please verify that the status lamp turns blue when the pen nib and side
switch are pushed. If the lamp doesn’t change colours, this probably
indicates that either the pen or the tablet is probably defective.
If possible, quickly click in the same area.
In the control panel, set the double-clicking interval to a longer setting and
set the pen nib sensitivity to a lighter setting.
Verify that the double-click speed setting is not too fast in the regular
mouse control panel.
Please refer to your software application and the store where you bought
the application to verify whether it is pressure function-enabled. Some
applications have special settings that must be established before the
pressure function becomes operational.
The tablet driver probably is not installed properly. Try re-installing it.
General Troubleshooting
Condition
What to Do
When a replacement computer
is purchased or new software
is used, the tablet cannot be
used.
Installing the newest version of tablet driver may resolve this problem. The
newest tablet driver can be downloaded from the Wacom homepage.
www.wacom-asia.com
The tablet, which is connected
to a USB hub, doesn’t
respond.
Some USB hubs cannot recognize tablets. Connect the tablet directly to
the computer’s USB port.
Troubleshooting for Windows
Condition
What to Do
Even when connected to
the USB port, the pen is
inoperable.
•Check the connection of the USB connector. If using a USB hub
connection, try connecting directly to the computer’s USB port.
•When the product model type appears in the Unknown Device list, select
it and click the Delete button, canceling all settings for it. Next, click the
Renew button and, following the directions in the New Hardware dialog
box, re-install the tablet driver.
•If use of the USB port is advantageous, open the Control Panel folder and
then the System folder. Then open, in order, the Hardware and Device
Manager folders. Next, check and make sure that USB (Universal Serial
Bus) Controller appears in the list that is displayed. If it isn’t present, it
will be necessary to adjust your computer. Please consult your computer
maker regarding this.
When using a DOS mouse, the pen is inoperable. You must use another
mouse.
When Windows is in DOS
full screen mode, moving the
pointer with the pen becomes
impossible.
If the mouse is set for lefthanded use in the regular
mouse control panel, the
ability to click with the pen nib
is lost.
Restart Windows.
25
DTF720AB(E).indb 25
09.1.15 0:35:26 PM
Troubleshooting for Macintosh
Condition
What to Do
Even when connected to
the USB port, the pen is
inoperable.
The product always reverts to
mouse mode and the pressure
function cannot be used.
-Check the connection of the USB connector. Connect directly to the
computer’s USB port.
-If equipped with a USB card, the system software has probably not been
installed properly.
-If you have any other high-speed, high-power USB peripherals, connect
these and check and see whether they operate properly or not. If these
other units operate properly, this would seem to indicate that the tablet is
defective.
The tablet driver may not be properly installed. Try reinstalling it.
Specification
General Specifications
Dimensions(W × D × H):
Weight:
Input voltage:
Power consumption:
Operating condition:
Storage condition:
400 × 362 × 55.5 mm, excluding stand
6.0kg, including stand
DC12V
37W (Max)
2W or less in sleep modes
1W or less in off mode
5 to 35˚C, 20 to 80%RH (non-condensing)
-10 to 60˚C, 20 to 90%RH (non-condensing) (maximum storage humidity is 38% at a
temperature of 60°C, and maximum storage temperature is 42°C at a humidity of 90%)
LCD Display Specifications
Display panel:
Screen size:
Supported resolution:
Pixel pitch:
Screen size:
Display colors:
Input video signal:
Plug and Play:
a-Si TFT Active Matrix LCD
17 inch
1280 × 1024 pixels, 1024 × 768 pixels, 800 x 600 pixels, 640 × 480 pixels
0.264(W) × 0.264 (H) mm
337.92 × 270.36mm
256 level; 16,777,216 colors
Analog RGB input 0.7 Vp-p, 75Ω, straight polarity
Synchronous inputs : TTL level, 2.2 kΩ, polarity freedom (horizontal / vertical separation or composite synchronous input)
Synchronous frequency: horizontal: 30 – 80 kHz; vertical 50 – 75 Hz
Scanning method: all non-interlace
DDC2B
* On rare occasions, light and dark dots may appear on a small part of the display screen. This condition does not
indicate product failure.
* Afterimages may remain on the screen after still images have been displayed for a long period of time, but these will
disappear after a short period of time.
Tablet Specifications
Reading technology:
Active area:
Resolution:
Accuracy:
Electromagnetic induction method
337.92 × 270.336mm
Maximum 20 lpmm (0.05 mm)
+/- 0.5 mm; four corners (25mm wide, 80mm long from each corner of four "L" shaped
area) to be +/- 2.0 mm.
Reading height:
5mm
Rate:
100 points/sec
Pressure levels:
512 levels
Communication interface: USB
Pen Specifications
Pressure functions:
Pen tip travel:
Load when pen nib is
switched on:
Physical size:
Weight:
Pen nib switch
0.2 mm or less
30 g or less
12.5 × 146.5 mm
10g, approximately
26
DTF720AB(E).indb 26
09.1.15 0:35:26 PM
Obtaining Technical Support
If you experience a problem with this product that cannot be solved by referring to this
guide or the manual included with your driver CD, please refer to our online FAQ or
contact our support staff.
Please visit www.wacom-asia.com/support or email support@wacom-apsupport.com
if you have questions that need to be answered by phone or e-mail. Phone support
hours: 9 am - 6 pm on weekdays and Saturday. (Note: Hours may vary by region. Phone
numbers for Australia, New Zealand, Singapore, Malaysia, Thailand and Taiwan are
available online.)
------------------------------------------------Support for Hong Kong residents is available from Wacom Hong Kong Ltd.
URL: www.wacom.com.hk
Tel: (852) 2573-9322, Fax: (852) 2573-9500
Email: sales@wacom.com.hk
------------------------------------------------Regarding Limited Warranty in the Asia Pacific region (excluding China and Hong Kong)
Wacom Co., Ltd. warrants the product, to the original consumer purchaser, including the
main unit and accessories such as the AC adapter and cables, to be free from defects in
materials and workmanship under normal use and service for a period of one (1) year,
from the date of original retail purchase, as evidenced by a copy of the receipt (proof of
purchase) or if issued, the warranty card from your local reseller or distributor. Wacom's
Limited Warranty Policy for Asia Pacific can be found on the Asia Pacific website at:
www.wacom-asia.com/technical/warranty
Premium Extended Warranty Service is available in Asia Pacific
www.wacom-asia.com/technical/warranty/premiumwarranty.html
27
DTF720AB(E).indb 27
09.1.15 0:35:27 PM
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, Pursuant to Part 15 the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
DTF720AB(E).indb 28
09.1.15 0:35:27 PM

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:01:22 13:24:41+08:00
Create Date                     : 2009:01:22 13:24:05+08:00
Metadata Date                   : 2009:01:22 13:24:41+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Format                          : application/pdf
Title                           : DTF720AB(E).indb
Creator                         : OSX01
Document ID                     : uuid:68c71e72-9891-4a29-8d8b-0f369a5e1ed1
Instance ID                     : uuid:ba191802-b8f4-45f8-948f-eb84f49187df
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Has XFA                         : No
Page Count                      : 28
Author                          : OSX01
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HV4DTF720A

Navigation menu