Wacom Co XD Serial/USB Digitizer with Pen and/or Mouse User Manual Manual 01
Wacom Co Ltd Serial/USB Digitizer with Pen and/or Mouse Manual 01
Wacom Co >
Contents
- 1. Manual 00
- 2. Manual 01
- 3. Manual 02
Manual 01
Learning About Intuos2 page page Running the Intuos2 Overview For a quick overview of your Intuos2 Graphics Tablet System, double-click on the INTUOS2 OVERVIEW icon located on the Wacom CD. Dragging. Select an object, then slide the pen tip across the tablet surface to move the object. Viewing the Online USER’S MANUAL For more detailed information on using and customizing Intuos2, refer to the online User’s Manual. Windows - To view the manual, select INTUOS2 USER’S MANUAL from the WACOM TABLET group. Macintosh - To view the manual, double-click on the INTUOS2 USER’S MANUAL icon located in the WACOM TABLET folder. To read the User’s Manual before installing Intuos2, run the install program and choose CUSTOM install. Deselect all components except ENGLISH USER’S MANUAL and ACROBAT. Click INSTALL or NEXT, and follow the prompts. Using the Intuos2 Pen and 2D/4D Mouse Erasing. In supporting applications, the pen’s eraser works like the eraser on a pencil. In text applications, use the eraser to select text, then lift the eraser from the tablet to delete the text. Customizing Your Intuos 2 Tools — The Basics Refer to the online User’s Manual for detailed information on using Intuos2. Quick Start Guide PRELIMINARY Tabs display settings for the selected application and tool. • Recherchez le guide de mise en route correspondant à votre langue sur le CD Wacom. • Busque la Guía de arranque rápido en su idioma en el CD de Wacom. • Procure o Guia de Inicialização Rápida em seu idioma no CD Wacom. Box Contents Wacom CD Contains the Intuos2 software, Overview, User’s Manual, and a Readme file. Add Graphic Update Graphic software suite Intuos2 Pen 2D Mouse Bundled Software CD 4D Mouse (9x12 and 12x18 tablets) Pen Stand Update Graphic Resets the selected tab to its factory default values. Returns a tab to its previously saved or last applied settings. Current selections are highlighted. Wedges emphasize the relationship between tab settings and the selected tool and application. Getting started with Intuos2 is quick and easy. Just use this guide to install the hardware and software, and to learn the basics of the Intuos2 Graphics Tablet System. The pull-down menus access a variety of control panel features. For Windows only. OK saves changes and closes the control panel. CANCEL closes the control panel without saving changes. Use APPLY to save changes without closing the control panel. HELP displays online Help for the control panel. page Intuos™2 Serial Tablets for Windows® These buttons are for creating application-specific settings. Refer to the online User’s Manual for details. Displays tools that can be customized for the application selected above. Using the 2D/4D Mouse. Place the 2D/4D Mouse on the tablet. The screen cursor is positioned when you move the Mouse across the tablet surface. Refer to the online User’s Manual for detailed information on button and fingerbwheel defaults for the 2D/4D Mouse. The Wacom control panel makes it easy to customize your Intuos2 tools. To open the control panel: Windows. Click on the Windows START button and choose PROGRAMS. From the WACOM TABLET group, choose the WACOM TABLET option. Macintosh. From the Apple menu, choose CONTROL PANELS and then WACOM TABLET. When you open the control panel with an Intuos2 tool, the tool is automatically selected in the Tool List and the appropriate tabs are displayed. To customize the selected tool, make your changes to the tab controls. On Windows systems, be sure to click APPLY or OK to save your changes. Note: Application-specific settings are for advanced users. Refer to the online User’s Manual for more information on creating and using application-specific settings. Displays applications that have custom tool settings associated with them. Pointing and selecting. Move the Intuos2 Pen above the tablet surface to position the screen cursor, then press the pen tip on the tablet to make a selection. Clicking. Tap the tablet once with the pen tip. Double-clicking. Press the upper side switch (Windows) or lower side switch (Macintosh), or quickly tap the tablet twice in the same place with the pen tip. page Windows control panel shown. Copies settings from one tool or application to another. © 2001 Wacom Company, Limited. All rights reserved. Wacom is a registered trademark, and Intuos 2 is a trademark of Wacom Company, Ltd. Other product and company names are trademarks and/or registered trademarks of the respective owners. 4x5 The Intuos2 tool(s) and tablet included in your box will vary depending upon the tablet model purchased. Images are not shown to scale. 6x8, 9x12 12x12, 12x18 Questions? Visit our Web site at http://www.wacom.com/productsupport PRN-A2xx 0X10752xx 1 Hardware Installation Windows Turn off your computer. A. Plug the tablet cable into your computer’s serial communication port. B. Connect the AC power cable. Connect the Wacom power adaptor to an AC outlet or power strip. If your tablet has a power switch, be sure to turn it on. The tablet LED will light. page Software Installation Follow the instructions for your version of Windows. Windows 98 & 2000 (Plug and Play Install) • Turn on your computer. • The NEW HARDWARE FOUND dialog box will display, followed by the NEW HARDWARE WIZARD. If the NEW HARDWARE dialog box does not display, follow the instructions under the Windows 95 & NT 4.0 (Manual Install) section. Click NEXT to continue. • Select the option SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED) and click NEXT. • Insert the Wacom CD into the CD-ROM drive. Then check the CD-ROM DRIVE option, click NEXT, and follow the prompts. • The NEW HARDWARE WIZARD will finish, and the CHOOSE SETUP LANGUAGE dialog box will display. • Select a language from the CHOOSE SETUP LANGUAGE dialog box and follow the prompts. You may register your tablet when prompted. • Adobe Acrobat Reader V4.0 or greater is required to view the online User’s Manual and Help. If Acrobat Reader is already installed on your system, you may cancel this installation. You should now be able to use your Intuos2 Pen on the tablet to move the screen cursor. If the cursor does not move, you should run the Intuos2 SETUP program from the Wacom CD A WACOM TABLET group was created in the START menu under PROGRAMS. It contains shortcuts to the Wacom Tablet Control Panel, User’s Manual, and a Readme file. page Windows 95 & NT 4.0 (Manual Install) • Turn on your computer. • If the NEW HARDWARE FOUND dialog box displays, select CANCEL. • Insert the Wacom CD into the CD-ROM drive. • Click on the START button and select RUN.... In the dialog box, type the letter of your CD-ROM drive and \SETUP. For example, D:\SETUP. If your CD-ROM has a different drive letter, type that letter instead of D:. Then click OK. IMPORTANT: If you replaced your mouse with the tablet, press CTRL+ESC to open the START menu. Use the arrow keys to select RUN..., and then press ENTER. • Select a language from the CHOOSE SETUP LANGUAGE dialog box and follow the prompts. • You may register your tablet when prompted. • Adobe Acrobat Reader V4.0 or greater is required to view the online User’s Manual and Help. If Acrobat Reader is already installed on your system, you may cancel this installation. You should now be able to use your Intuos2 Pen on the tablet to move the screen cursor. A WACOM TABLET group was created in the START menu under PROGRAMS. It contains shortcuts to the Wacom Tablet Control Panel, User’s Manual, and a Readme file. Bundled Software Installation page Insert the Wacom Software Suite CD into your computer’s CD-ROM drive. The SOFTWARE INSTALLATION MENU should automatically display. If the menu does not display, double-click on the INSTALL icon located on the CD to manually launch the SOFTWARE INSTALLATION MENU. From the SOFTWARE INSTALLATION MENU, select the application that you want to install and follow the prompts. If you are prompted to restart the computer, you may wait until all of the software applications have been installed before restarting. If you had trouble installing the bundled software... Refer to the appropriate README file or manual provided with that software for troubleshooting or technical support information. If you had trouble installing Intuos2... See the README file located in your language folder on the CD, or refer to Troubleshooting in the online User’s Manual. You can also visit our Web site at http://www.wacom.com/productsupport Technical Support can be reached during normal business hours (Pacific Time) at ++1-360-896-9833
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2001:05:24 14:46:27 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2001:05:29 11:53:39+09:00 Page Count : 2EXIF Metadata provided by EXIF.tools