Wagan 2257 Users Manual Your 350 Watt Power Inverter Converts 12 Volt Vehicle Battery Into 115 Volts Of AC

2257 to the manual 16b7ab21-48cb-4ad4-2970-9063af3aae5f

2015-02-03

: Wagan Wagan-2257-Users-Manual-476242 wagan-2257-users-manual-476242 wagan pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

User's Manual
Item no. 2257
R
WAGAN Corp. Limited Warranty Registration Form
All WAGAN Corporation products are warranted to the original purchaser of this product.
Warranty Duration: This product is warranted to the original purchaser for a period of one (1)
Year from the original purchase date, to be free of defects in material and workmanship. WAGAN
Corporation disclaims any liability for consequential damages. In no event will WAGAN
Corporation be responsible for any amount of damages beyond the amount paid for the product
at retail. In the even of a defective item, please ship the item, prepaid, with a complete
explanation of the problem, your name, address and daytime phone number. WAGAN
Corporation will, at its option, replaces or repair the defective part. This warranty is void if the
product has been damaged by accident, in shipment, unreasonable use, misuse, neglect,
improper service, commercial use, repairs by unauthorized personnel or other causes not arising
out of defects in materials or workmanship. This warranty is effective only if the product is
purchased and operated in the USA and does not extend to any units which have been used in
violation of written instructions furnished.
Warranty Disclaimers: This warranty is in-lieu of all warranties expressed or implied and no
representative or person is authorized to assume any other liability in connection with the sale of
our products. There shall be no claims for defects or failure of performance or product failure
under any theory of tort, contract or commercial law including, but not limited to negligence,
gross negligence, strict liability, breach of warranty and breach of contract.
Warranty Performance: During the above one (1) Year warranty period, a product with a defect
will be replaced with a comparable model when the product is returned to WAGAN Corporation
with an original store receipt. The replacement product will be in warranty for the balance of the
one (1) Year warranty period.
Please activate my limited warranty for WAGAN Corp.
Enclosed copy of original sales receipt.
Name
Mail Address
City
State, Zip Code
Item Purchased Impact Wrench Kit
Stores Name
Date of Purchase
Signature Date
All WAGAN Corporation Products must be registered within (30) days of purchased to activate this warranty.
Mail the complete registration form, along with a copy of the original receipt to:
Attn: Customer Service
WAGAN Corporation
3589 Yale Way
Fremont, CA 94538
c 2004 WAGAN Corp.
Impact Wrench Kit
Impact Wrench Kit
Impact Wrench Kit
Impact Wrench Kit TM
Impact Wrench Kit by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2004 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
2
Thank you for purchasing the Impact Wrench Kit by Wagan
Tech. With normal care and proper treatment it will provide
years of reliable service. Please read all operating instructions
carefully before use.
GENERAL SAFETY PRECAUTIONS :
1. Maintain labels and nameplates on this product. These carry
important information.
2. Keep work area clean and dry. Cluttered, damp, or wet work
areas invite injuries.
3. Keep children away from work area. Do not allow children to
handle this product.
4. Store idle equipment. When not in use, tools and equipment
should be stored in a dry location to prevent rust. Always lock up
tools and equipment, and keep out of reach of children.
5. Do not use this product if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment
or reflexes are impaired while taking drugs. If there is any doubt, do
not attempt to use this product.
6. Use eye protection. Wear ANSI approved safety impact eye
goggles when using this product.
7. Dress safely. Do not wear loose clothing or jewelry, as they can
become caught in moving parts. Wear a protective hair covering to
prevent long hair from becoming caught in moving parts.
8. Do not overreach. Keep proper footing and balance at all times to
prevent tripping, falling, back injury, etc.
9. Industrial applications must follow OSHA requirements.
10. Stay alert. Watch what you are doing at all times. Use common
sense. Do not use this product when you are tired or distracted from
the job at hand.
11. Check for damaged parts. Before using this product, carefully
check that it will operate properly and perform its intended function.
Check for damaged parts and any other conditions that may affect the
operation of this product. Replace or repair damaged or worn parts
immediately.
12. Replacement parts and accessories: When servicing, use only
identical replacement parts.
13. Maintain this product with care. Keep this product clean and dry for
better and safer performance. For your safety, service and maintenance
should be performed regularly by a qualified technician.
14. Use the right tool for the job. Do not attempt to force a small tool to do
the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the
capacity for which it was intended. Do not modify this tool, and do not use
this tool for a purpose for which it was not intended.
15. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding work space. Always keep the
area free of obstructions, grease, oil, trash, and other debris.
16. Always disconnect the Impact Wrench from its electrical supply source
before changing Sockets or performing any maintenance on the tool.
WARNINGS :
- The Impact Wrench is designed for use with a 12 volt DC system only.
Do not attempt to use any other type of electrical system.
- To avoid overheating the tool’s motor, do not use the Impact Wrench
continuously for over 8 minutes..
- Prior to performing maintenance or repair on a vehicle, make sure to read
and understand all instructions and safety precautions as outlined in the
vehicle manufacturer’s owner’s manual.
- This Impact Wrench is designed for emergency purposes only. For non
emergency purposes, use an industrial/commercial class Impact Wrench.
- In the event of an emergency, move the vehicle a safe distance from the
roadside and away from all other traffic. Park the vehicle on dry, flat, level,
ground. Turn off the vehicle, and set the emergency brake before
attempting to change a flat tire.
- Avoid accidental electrical shock. Keep the Impact Wrench dry at all
times.
Impact Wrench Kit by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2004 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
3
- Avoid eye injuries. Always wear ANSI approved safety impact eye
goggles when working with a vehicle battery that under certain
circumstances can explode, causing possible serious burns and
injuries to the eyes.
- Avoid contact with battery acid. If splashed, immediately wash
affected area with clean water. Continue washing until medical help
is available.
- Avoid working alone. If an accident occurs, an assistant can bring
help.
- When using a power hand tool, always grasp the tool firmly with
both hands to maintain control of the tool.
- People with pacemakers should consult their physician(s) before
using this product. Operation of electrical tools in close proximity to a
heart pacemaker could cause interference or failure of the
pacemaker.
- The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may
occur. The operator must understand that common sense and
caution are factors, which cannot be built into this product, but must
be supplied by the operator.
If the vehicle’s cigarette lighter fuse is below 15 amps, you will need to use
the vehicle’s battery as an electric power source, using the Battery Clamps.
To do so attach the Red positive (+) Clamp to the positive (+) terminal on
the vehicle’s battery. Then, attach the Black negative (-) Clamp to the
negative (-) terminal on the vehicle’s battery then connect the Lead Wire
Plug to the Battery Clamps.
UNPACKING :
If any parts are missing or broken, please contact the store where it
is being purchased.
Note that this 12-volt Impact Wrench operates differently than 115
volt or air impact wrenches. The motor will run to build inertia, and
then will strike a blow of the hammer. This is repeated, becoming
more rapid with decreased resistance. This is normal operation for
this product.
OPERATING INSTRUCTIONS :
NOTE :
1. Make sure the vehicle is parked safely away from all other moving
traffic. Park the vehicle on a dry, flat, level, ground surface. Turn off the
vehicle, and set the vehicle’s emergency brake.
2. Select the appropriate size Socket with which to remove the Lug Nuts
on the vehicle’s wheel. Then, attach the Socket to the Impact Wrench.
4. If the vehicle’s cigarette lighter fuse is above 15 amps, you may use the
vehicle’s cigarette lighter receptacle as an electric power source. To do so,
remove the cigarette lighter and insert the Lead Wire Plug firmly into the
cigarette lighter receptacle.
Impact Wrench Kit by Wagan Tech
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2004 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
4
5. Remove the vehicle’s spare tire and set it aside.
6. Use the vehicle’s jack to raise the vehicle. CAUTION! Refer to
the vehicle manufacturer’s owner’s manual for instructions on using
the jack and to determine the proper lifting points on the vehicle.
Always chock the opposite wheel.
7. If necessary, remove the wheel’s hubcap to expose the wheel lug
nuts.
8. Make sure the Impact Wrench is off. Then, depress the Forward/
Reverse Switch to its Reverse position (counterclockwise rotation).
9. Insert the Socket onto the first wheel lug nut and, while
maintaining a firm grip on the Impact Wrench with both hands,
squeeze the Trigger until the wheel lug nut is removed from the
wheel lug bolt. Release pressure on the Trigger to turn the Impact
Wrench off. Remove the wheel lug nut from the Socket and set the
lug nut aside. Then, repeat this Step to remove the remaining wheel
lug nuts.
10. Once all of the wheel lug nuts are removed, carefully remove the
vehicle’s flat tire and install the spare tire onto the wheel lug bolts.
11. Finger tighten each of the wheel lug nuts onto the wheel lug
bolts.
12. Make sure the Impact Wrench is off. Then, depress the
Forward/ Reverse Switch to its Forward position (clockwise rotation).
13. Note: Check vehicle owner’s manual for tightening sequence.
Insert the Socket onto the first wheel lug nut and, while maintaining a
firm grip on the Impact Wrench with both hands, squeeze the Trigger
until the wheel lug nut is firmly tightened onto the wheel lug bolt.
Release pressure on the Trigger to turn the Impact Wrench off.
Then, repeat this Step to tighten the remaining wheel lug nuts onto
the lug bolts.
14. Using the vehicle’s jack, slowly and carefully lower the vehicle.
15. If necessary, re-attach the vehicle’s hubcap to the wheel. Then,
store the vehicle’s jack and spare tire securely in the trunk of the
vehicle.
16. If the vehicle’s battery was used to supply electricity to the
Impact Wrench, disconnect the Red and Black Battery Clamps from
the battery. Disconnect the Lead Wire Plug from the Battery
Clamps. Remove the Socket from the Impact Wrench. Place the
Impact Wrench and its accessories in the Carrying Case. Then, store the
Carrying Case securely in the vehicle’s trunk.
17. If the vehicle’s cigarette lighter receptacle was used to supply
electricity to the Impact Wrench, disconnect the Lead Wire Plug from the
cigarette lighter receptacle. Insert the cigarette lighter back into its
receptacle. Remove the Socket from the Impact Wrench. Place the Impact
Wrench and its accessories in the Carrying Case. Then, store the Carrying
Case securely in the vehicle’s trunk.
INSPECTION, MAINTENANCE, AND CLEANING :
1. Before each use, inspect the general condition of the Impact Wrench.
Check for loose connections, cracked, or broken parts, excessively worn or
damaged wiring, and any other condition that may affect the safe and
proper operation of the Impact Wrench. If a problem occurs, have the
problem corrected before further use. Do not use damaged equipment.
2. When cleaning, use only water and a mild detergent. Do not immerse
the Impact Wrench in liquid. Do not use cleaners that are combustible or
corrosive.
PRODUCT SPECIFICATIONS :
Name Description
Electrical Requirements 12 Volt DC / 4.5 Amps
Fuse 13Amp
Torque Capacity 155 lbf-ft (~ 210 N.m) Clockwise
250 lbf-ft (~ 340 N.m) Counterclockwise
Drive Socket Sizes 0.67in, 0.75in, 0.83in, 0.91in
(17mm 19mm 21mm 23mm)
Cords DC Cord/Plug for Cigarette Lighter Receptacle
Alligator Cord/Clamps for Battery Terminal
Light Built-In LED Light For Night Use

Navigation menu