Wagons Digital LEACSIPAD2 ZAGGFOLIO WITH KEYBOARD User Manual
Wagons Digital Co., Ltd. ZAGGFOLIO WITH KEYBOARD
Users Manual
Provide Protection, Bluetooth Keyboard, and integrated Stand for tablet device
Storage and Protection
It attaches to the front of the tablet device by inserting the tablet face first into the opening of the
tray. The tablet device is safely held into position, and protected, by using a shock absorbing,
friction fitting around the inside edges of the product.
Use To utilize the stand and keyboard function of the product, you remove the tablet device by
gently prying the tablet out of the case. You then lift up the hinge and lock it in place by
choosing your desired angle and sliding the tabs down into the proper slots and pushing back to
lock hinge in place. Then, simply place tablet device (either in portrait or landscape mode) into
the opening, running from end to end, and rest it against the raised hinge.
Bluetooth Keyboard Pairing
To utilize the Bluetooth keyboard, you must pair it to the tablet. We will demonstrate this
process using an iPad, however, it will be similar for all tablet devices. The pairing process is as
follows:
1. On the tablet, click on Settings icon on desktop
2. On tablet, Click General
3. On tablet, Click Bluetooth
4. On the product, slide the power button to on
5. On product, Click on pair
6. The tablet will display a code
7. Type the code on the keyboard and press enter
8. Your product is now paired to your tablet device
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC ID: YW2-LEACSIPAD2
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.